As an ENERGY STAR??

Partner, our company has determined that this product meets the ENERGY STAR?? guidelines for energy efficiency. ENERGY STAR?? is a U.S. registered mark.

If you need additional operating assistance after reading this owner???s manual, please call

TOLL FREE : 1-800-968-3429.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON- NEL.

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

1.Read instructions-All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions should be followed.

5.Cleaning-Unplug TV/DVD/VHS from the wall outlet before

AMEUBLES- Cet appareil ne doit ??tre plac?? que sur un meuble (avec ou sans roulettes) recommand?? par le fabricant. Si vous l???installez sur un meuble ?? roulettes, d??placez les deux ensembles avec pr??caution.

Un arr??t brusque, l???utilisation d???une force excessive et des sur- faces irr??guli??res risquent de d??sta- biliser l???ensemble et de le renverser.

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possi- bility of the loss of an authorization code for a CATV con- verter, is not intended to be unplugged by the user for clean- ing or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description other- wise required in item 5.

6.Attachments-Do not use attachments not recommended by the TV/DVD/VHS manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/DVD/VHS near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories-Do not place this TV/DVD/VHS on an unstable cart, stand, tripod, bracket, or table. The TV/DVD/VHS may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/DVD/VHS. Any mounting of

the appliance should follow the manufacturer???s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination

should be moved with care.Quick

stops, excessive force, and uneven surfaces may cause the appliance

and cart combination to overturn.

9.Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/DVD/VHS and to protect it from over- heating, and these openings must not be blocked or cov- ered. The openings should never be blocked by placing the TV/DVD/VHS on a bed, sofa, rug, or other similar surface. This TV/DVD/VHS should never be placed near or over a radiator or heat register. This TV/DVD/VHS should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer???s instructions have been adhered to.

10.Power Sources-This TV/DVD/VHS should be operated only from the type of power source indicated on the mark- ing label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/DVD/VHSs intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/DVD/VHS is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety fea- ture. If you are unable to insert the plug fully into the out- let, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying par- ticular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/DVD/VHS, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/DVD/VHS receiver during a lightning storm, or when it is left unat- tended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/DVD/VHS due to lightning and power-line surges.

15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind into this TV/DVD/VHS through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD/VHS.

18.Servicing-Do not attempt to service this TV/DVD/VHS yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this TV/DVD/VHS from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the TV/DVD/VHS.

c.If the TV/DVD/VHS has been exposed to rain or water.

d.If the TV/DVD/VHS does not operate normally by follow- ing the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/DVD/VHS to its normal operation.

e.If the TV/DVD/VHS has been dropped or damaged in any way.

f.When the TV/DVD/VHS exhibits a distinct change in per- formance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same character- istics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other haz- ards.

21.Safety Check-Upon completion of any service or repairs to this TV/DVD/VHS, ask the service technician to perform routine safety checks to determine that the TV/DVD/VHS is in proper operating condition.

22.Heat-This TV/DVD/VHS product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public perfor- mance and lending of discs are prohibited.

FCC WARNING- This equipment may gener- ate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction man- ual. The user could lose the authority to oper- ate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter- mined by turning the equipment off and on, the user is encouraged to try to correct the interfer- ence by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the equipment and receiver.

3)Connect the equipment into an outlet on a cir- cuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to ser- vice this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil num??rique de la classe B est con- forme ?? la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

ATTENTION: POUR ??VITER LES CHOC

??LECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU???AU FOND.

For safe operation and satisfactory performance of your TV/DVD/VHS, keep the following in mind when selecting a place for its installation:

???Shield it from direct sunlight and keep it away from sources of intense heat.

???Avoid dusty or humid places.

???Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

???Install unit in a horizontal position.

???Avoid locations subject to strong vibration.

???Do not place the TV/DVD/VHS near strong magnetic fields.

???Avoid moving TV/DVD/VHS to locations where temperature differences are extreme.

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a DVD is played in a TV/DVD/ VHS which has moisture, it may damage the DVD and TV/DVD/VHS. Therefore when the condensation occurs inside the unit, turn the POWER button on and allow at least 2 hours for the unit to dry out.

C IMPORTANT SAFEGUARDS . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE .5

WARNING . . . . . . . . . . . . . . . . . . . .5

C FEATURES . . . . . . . . . . . . . . . . . . . .7

C OPERATING CONTROLS AND

FUNCTIONS . . . . . . . . . . . . . . . . . . .9

C PREPARATION FOR USE . . . . . . .11

ANTENNA/CABLE

CONNECTIONS . . . . . . . . . . . . . . .11

CONNECTIONS TO FRONT A/V JACKS . . . . . . . . . . . . . . . . . . . . . .12

INSTALLING THE BATTERIES . .12

CONNECTING TO A STEREO SYSTEM . . . . . . . . . . . . . . . . . . . .13

CONNECTING TO AN AMPLIFIER

EQUIPPED WITH DIGITAL INPUT

JACKS, MD DECK OR DAT DECK (for DVD) . . . . . . . . . . . . . . . . . . . .13

CONNECTING TO A DOLBY

DIGITAL DECODER

OR DTS DECODER (for DVD) . . .14

CHANNEL SET UP

FOR THE FIRST TIME . . . . . . . . .15

DELETING (OR ADDING) CHANNEL . . . . . . . . . . . . . . . . . . .15

CHANNEL SET UP AGAIN . . . . . .16

SELECTING THE LANGUAGE . .16 DAYLIGHT-SAVING TIME . . . . . .16

CLOCK SET UP

(AUTO / MANUAL) . . . . . . . . . . . .17

TV/VCR SECTION

C TV OPERATION . . . . . . . . . . . . . . .19

WATCHING A TV PROGRAM . . .19 DEGAUSSING . . . . . . . . . . . . . . . .19 PICTURE CONTROL . . . . . . . . . . .19 CLOSED CAPTION SYSTEM . . . .20 V-CHIP SET UP . . . . . . . . . . . . . . .21

C MTS(Multi-Channel Television

sound)SYSTEM . . . . . . . . . . . . . . . .23

CHECKING THE SELECTED

MTS MODE . . . . . . . . . . . . . . . . . .23

MTS RECORDING/MONITOR MODE . . . . . . . . . . . . . . . . . . . . . .23

SELECTING THE MTS SYSTEM .24

C VIDEO CASSETTE . . . . . . . . . . . . .25

C PLAYBACK . . . . . . . . . . . . . . . . . . .26

NORMAL PLAYBACK . . . . . . . . .26 TRACKING ADJUSTMENT . . . . .26 SLOW MOTION . . . . . . . . . . . . . .26

PICTURE SEARCH . . . . . . . . . . . .26 STILL PICTURE . . . . . . . . . . . . . .26 VERTICAL HOLD CONTROL . . .26

C SPECIAL PLAYBACK . . . . . . . . . .27

RENTAL PLAYBACK . . . . . . . . . .27

AUTO REPEAT PLAYBACK . . . . .27

C SEARCH . . . . . . . . . . . . . . . . . . . . .28

ZERO RETURN . . . . . . . . . . . . . . .28 TIME SEARCH . . . . . . . . . . . . . . .28 INDEX SEARCH . . . . . . . . . . . . . .29

C SPECIAL FEATURES . . . . . . . . . .29

REAL TIME TAPE COUNTER . . .29

AUTO REWIND-EJECT . . . . . . . .29

C RECORDING . . . . . . . . . . . . . . . . .30

NORMAL RECORDING . . . . . . . .30

SKIPPING UNWANTED SCENES

DURING

RECORDING . . . . . . . . . . . . . . . . .30 OTR (One Touch Recording) . . . . . .31

COPYING A VIDEO CASSETTE (Requires a VCR or camcorder) . . .31

C TIMER . . . . . . . . . . . . . . . . . . . . . .32

AUTOMATIC

TIMER RECORDING . . . . . . . . . .32

TIMER PROGRAM EXTENSION .33

HINTS FOR AUTOMATIC TIMER RECORDING . . . . . . . . . . . . . . . . .34

AUTO RETURN . . . . . . . . . . . . . . .34 SLEEP TIMER . . . . . . . . . . . . . . . .34

C ON SCREEN DISPLAY . . . . . . . . .35

C CABLE CHANNEL

DESIGNATIONS . . . . . . . . . . . . . .35

DVD SECTION

C ABOUT THE DISCS . . . . . . . . . . . .36

PLAYABLE DISCS . . . . . . . . . . . .36 DISC TYPES . . . . . . . . . . . . . . . . .36

SYMBOLS USED IN

THIS MANUAL . . . . . . . . . . . . . . .36

C PLAYING A DISC . . . . . . . . . . . . . .37

PLAYING A DVD VIDEO OR AN AUDIO CD . . . . . . . . . . . . . . . . . . .36

USING THE DVD MENUS . . . . . .36 USING THE TITLE MENU . . . . . .36

RESUMING PLAYBACK

FROM THE POINT WHERE PLAYBACK STOPPED . . . . . . . . .38

FAST FORWARD/REVERSE . . . . .38

PAUSING PLAYBACK OR DIS-

PLAYING

A STILL PICTURE . . . . . . . . . . . . .38

STEPPING THROUGH FRAMES .38

SLOW MOTION . . . . . . . . . . . . . .39

PLAYING FROM A DESIRED TITLE OR CHAPTER . . . . . . . . . .39

STARTING FROM A DESIRED

TIME COUNT . . . . . . . . . . . . . . . . .39

STARTING FROM A DESIRED TRACK . . . . . . . . . . . . . . . . . . . . . .39

REPEAT . . . . . . . . . . . . . . . . . . . . .40 A-B REPEAT . . . . . . . . . . . . . . . . .40 MARKER . . . . . . . . . . . . . . . . . . . .41 PROGRAM (Audio CD) . . . . . . . . .41 RANDOM (Audio CD) . . . . . . . . . .42 ZOOM PLAYBCK . . . . . . . . . . . . .42 PLAYING AN MP3 DISC . . . . . . . .42

CHANGING THE ONSCREEN

DISPLAY DURING MP3

DISC PLAY . . . . . . . . . . . . . . . . . .43

PLAYING AN MP3 DISC FROM

A DESIRED TRACK . . . . . . . . . . .43

PLAYING AN MP3 DISC IN A PROGRAMMED WAY . . . . . . . . . .43

PLAYING AN MP3 DISC AT RANDOM . . . . . . . . . . . . . . . . . . . .44

C SETTINGS . . . . . . . . . . . . . . . . . . .44

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE .44

CHANGING THE SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . .45

CHANGING THE CAMERA

ANGLE (Multi-Angle Pictures) . . . .45

CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . . .46

C CHANGING THE SETUP ITEMS .47

LANGUAGE SETTINGS . . . . . . . .47

DISPLAY SETTINGS . . . . . . . . . . .48

AUDIO SETTINGS . . . . . . . . . . . .49

PARENTAL LOCK . . . . . . . . . . . . .50

C LANGUAGE CODE LIST . . . . . . . .51

C TROUBLESHOOTING GUIDE . . .52

C MAINTENANCE . . . . . . . . . . . . . . .55

DISC HANDLING . . . . . . . . . . . . .55

C SPECIFICATIONS . . . . . . . . . . . . .56

C WARRANTY . . . . . . . . . . .Back Cover

???Hi-Fi system???The Hi-Fi stereo recording system offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter.

???Rotary 4-head Record/Playback System???Four heads ensure excellent picture quality and special effects playback.

???Index Search???Fast-forwards to start of next recording.

???Slow Motion???View recorded program at slower than normal speed.

???Infrared remote control

???Trilingual on screen tv/vcr setup display selec- table in English or Spanish or French

???Real time counter???This shows the elapsed recording or playback time in hours, minutes, and seconds. The ????????? indication will appear when the tape is rewound further than the tape counter position ???0:00:00???.

???181 channel capability PLL frequency synthesiz- er tuner with direct station call???(A converter may be necessary to view scrambled cable channels.)

???Auto Clock Setting???Allows you to set the clock function from a PBS broadcast station.

???Closed caption system???You may view specially labeled (cc) TV programs, movies, news, prere- corded tapes, etc. with either a dialogue caption or text display added to the program.

???Auto power on and off system???Automatically turns on the TV/DVD/VHS when you insert the cassette, turns off after auto-rewind, and ejects when the beginning of the tape is reached.

???Auto rewind when the end of a tape is reached???This function doesn???t occur when using timer recording.

???Smooth mode change???TV/VCR mode, DVD mode automatically changes without control.

???2 Step picture search operation???You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode. For SP mode only high speed.

???Three different playback tape speeds : SP/LP/SLP

???Two different recording tape speeds : SP/SLP

???Auto Head Cleaner???Automatically cleans video heads as you insert or remove a cassette.

???Zero Return???The tape returns to counter of 0:00:00 by rewinding or fast forwarding.

???Still??????Freeze??? the picture at any time, for close viewing of a particular scene.

???Digital Auto Tracking (DTR)???Automatically adjusts the tracking for each tape you play.

???Rental play mode???Improves playback picture quality from worn tapes, such as rental tapes.

???Auto repeat???Allows you to repeat the playing of a tape indefinitely without pressing the PLAY button.

???Time search???Let you set the TV/DVD/VHS to advance the tape by entering the desired playback time you want to skip.

???OTR (One Touch Recording)???Instant timed recording from 30 to 480 minutes is possible at the push of the REC/OTR button.

???1 Year, 8 events (including Daily and Weekly Timer Recording)???The built-in timer allows you to record up to 8 programs at different times on dif- ferent channels up to 1 year in advance. The Daily timer allows recordings to be made of daily broad- casts, and the Weekly timer allows recording to be made once a week up to the end of the tape.

???Auto return???After timer recording is finished, the TV/DVD/VHS can return to the beginning of the recording.

???Sleep timer???Allows you to have the TV/DVD/VHS automatically turn on or off at a desired time.

Timer Program Extension???Allow you to shift the time schedule for automatic timer recording.

???V-CHIP???Enables parents to prevent their children from watching inappropriate material on TV.

DVD

??Dolby Digital surround

This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.

??Still/fast/slow/step playback

Various playback modes are available including still pic- tures, fast forward/reverse, slow motion and step frames.

??Random playback for audio CD and MP3

This player can shuffle the order of tracks to play them in random order.

??Program playback for audio CD and MP3

You can program the order of tracks to play them in any desired order.

??DVD menus in a desired language

You can display DVD menus in a desired language, if available on a DVD.

??Screen saver/Auto power-off functions

The screen saver program starts when there is no input from the player for five minutes in the stop mode. When the screen saver program is activated for 30 minutes, the DVD power is automatically turned off, and "DVD" appears on the screen.

??Subtitles in a desired language

You can select a desired language for the display subtitles, if that language is available on a disc.

??Selecting a camera angle

You can select the desired camera angle, if a disc contains sequences recorded from different angles.

??Choices for audio language and sound mode

You can select the desired audio language and sound mode, if different languages and modes are available on a disc.

??Parental lock

You can set the control level to limit playback of discs which may not be suitable for children.

??Automatic detection of discs

This player automatically detects if a loaded disc is DVD, audio CD or MP3 on disc.

??Playing an MP3 disc

You can enjoy MP3 files which are recorded on CD- R/RW.

??Direct Search

You can search the desired title, chapter, and track with numeric button during playback or in stop mode.

Manufactured under license from Dolby Laboratories. ???Dolby??? and the double-D sym- bol are trademarks of Dolby Laboratories.

??On-screen display

Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control.

???Sleep timer

Allows you to have the TV/DVD/VHS automatically turn off at a desired time.

??DTS (Digital Theater System)

You can enjoy 5.1channel surround system developed by the Digital Theater System co. which reproduces the orig- inal sound as truthfully as possible.

??Search

Chapter search: Search for the chapter designated by user is possible.

Search for the title designated by user is possible.

Search for the track designated by user is possible.

Search for the time designated by user is possible.

Repeated playback of the chapter of the disc being played is possible.

Repeated playback of the title of the disc being played is possible.

Repeated playback of the track of the disc being played is possible.

Disc(audio CD): Repeated playback of the entire disc being

??Zoom

2-time and 4-time magnified screen can be displayed.

??Marker

The part designated by user can be called back.

??Resume Play

User can resume to playback from the part at which the play was stopped.

??SRS TruSurround

You can enjoy stereophonic virtual space on your existing stereo system.

??Bit rate indication

??DRC (Dynamic range control)

???DTS??? and ???DTS Digital Out??? are trademarks of Digital Theater Systems, Inc.

NOTE:

This unit employs TruSurround system

of SRS Labs, Inc. as virtual technology.

TruSurround and the symbol are trademarks of SRS Labs, Inc.

TruSurround technology is incorporated under license from SRS Labs, Inc.

POWER PICTURE SLEEP SELECT

7.Disc loading tray

8.DVD indicator

Lights on during DVD mode.

46.ANT. in jack

Connect to an antenna, cable system, or satellite system.

47.Power cord

Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to

avoid breaking a wire before you connect to a standard AC outlet.

48.COAXIAL digital audio out jack

Connect to the digital input of an external amplifier or decoder.

49.AUDIO L/R output jack

Connect to the analog audio input of an external amplifier or decoder.

Satellite Box or

Cable Box (Not supplied)

OUT

IN

VHF/UHF Antenna (Not supplied)

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/DVD/VHS without a converter box.

By using this connection you can:

1)Use the TV/DVD/VHS remote to select channels.

2)Program one or more unscrambled channels for Automatic Timer Recording.

NOTE: This unit will ONLY record and view the same channel.

CABLE WITH CONVERTER/

DESCRAMBLER BOX OR SATELLITE

BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the ilustration.

By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/DVD/VHS Remote Control. Unattended timer recording is limited to one channel at a time.

Antenna/Cable Connections

Continued on the Next Page.

TO RECORD A SCRAMBLED/UNSCRAM-

BLED CHANNEL

1. Set the TV/DVD/VHS channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3)

2.Select the channel to record from your Cable Converter Box or Satellite Box.

Note to CATV system installer:

This reminder is provided to call the CATV sys- tem installer???s attention to Article 820-40 of the NEC that provides guidelines for proper ground- ing and, in particular, specifies that the cable ground shall be connected to the grounding sys- tem of the building as close to the point of cable entry as practical.

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 ???AA??? penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.

3)Replace the cover.

CHANNEL SET UP FOR THE

FIRST TIME

1 Plug in the TV/DVD/VHS power cord

Plug the TV/DVD/VHS power cord into a standard AC outlet.

NOTE:

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

??? If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

2 Turn on the TV/DVD/VHS

Press the POWER button to turn on the TV/DVD/VHS.

1 Select ???CHANNEL SET UP???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???CHANNEL SET UP???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

BCHANNEL SET UP

USER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

3 Select ???ENGLISH??? or ???ESPA??OL??? or

NOTES:

???The TV/DVD/VHS distinguishes between standard TV channels and cable channels.

???If you want to play or record a video tape BEFORE presetting the tuner, you must press the SETUP button on the remote control. To preset the tuner again, see ???CHANNEL SET UP AGAIN??? on page 16.

???The TV/DVD/VHS may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO MEMO action again when reception conditions are better.

5 After scanning

The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L.

4 Delete (or add) it from (into) memory

Press the Arrow B or s button. The channel number changes to light red. The channel is deleted from memory.

???To delete another channel, repeat steps [3] and [4].

???If you press the Arrow B or s button again, the channel is memorized again.

5 Exit the channel setup mode

Added channel: Light blue.

Deleted channel: Light red.

Press the SETUP button on the remote control to returns to TV mode.

NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.

CHANNEL SET UP AGAIN

Make sure ...

???Press the POWER button to turn on the TV/DVD/VHS.

NOTE: If Spanish or French is selected accidentally, press the SETUP button on the remote control, press the Arrow K button to point to ???IDIOMA [ESPA??OL]??? or ???LANGAGE??? [FRAN??AIS], then press the Arrow B button, then press the SETUP button on the remote control.

1 Select ???CHANNEL SET UP???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???CHANNEL SET UP???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

BCHANNEL SET UP

USER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DAYLIGHT-SAVING TIME

Select this feature and the TV/DVD/VHS???s clock automatically will advance one hour in April, then reverse one hour in October.

When Daylight-Saving Time is ON, the clock will change automatically as follows:

2 Begin auto preset

??? CHANNEL SET UP ???

Press the Arrow K or L button to

ADD / DELETE CH (TV)

3 After scanning

The tuner stops on the lowest memorized channel.

???First Sunday of April : At 2 AM the clock imme- diately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record.

???Last Sunday of October : At 2 AM the clock immediately changes to 1 AM.

Make sure ...

???Press the POWER button to turn on the TV/DVD/VHS.

SELECTING THE LANGUAGE

Make sure ...

???Press the POWER button to turn on the TV/DVD/VHS.

1 Select ???SETTING CLOCK???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???SETTING CLOCK???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK

CHANNEL SET UP

USER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

NOTE: This function effects only the language on the screen menu and not the audio source.

2 Select ???ENGLISH??? or ???ESPA??OL??? or ???FRAN??AIS???

Select ???ENGLISH??? or ???ESPA??OL???= Spanish or ???FRAN??AIS???= French using the Arrow B or s button.

3 Exit the Language mode

Press the SETUP button on the remote control to return to TV mode.

2 Set ???D.S.T.??? (Daylight-Saving Time) to [ON]

3 Exit the Daylight-Saving Time mode

Press the SETUP button on the remote control to return to TV mode.

TO CANCEL THE DAYLIGHT-SAVING

TIME

Repeat steps [1] to [2], select [OFF] using the Arrow B or s button.

CLOCK SET UP (AUTO / MANUAL)

Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow ???AUTO CLOCK SET- TING???. If it is not, follow ???MANUAL CLOCK SET- TING???.

AUTO CLOCK SETTING

You can have the TV/DVD/VHS set the clock auto- matically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/DVD/VHS will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS).

Make sure ...

???TV/DVD/VHS power must be turned on.

???Confirm that the antenna connections are correct.

???The cable converter box must be turned on if your TV/DVD/VHS is connected directly to it. (See NOTES:)

???The channel is properly set in advance. (See page 16.)

NOTES:

???Auto clock setting only needs to be set once. But it can be done again if the clock???s time has become incorrect for some reason.

???If the TV/DVD/VHS is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/DVD/VHS must be set to the output chan- nel of the cable converter box or satellite box (usu- ally channel 3 or 4), to be able to set up or correct the clock automatically.

If you do not know what your local PBS station is, then follow ???Manual Clock Settings??? on page 18. The TV/DVD/VHS cannot control the channels of the cable converter box or satellite box.

3 Enter the channel number for the PBS station

Press the Arrow K or L button to

??? SETTING CLOCK ???

point to ???AUTO CLOCK CH???.

If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/DVD/VHS will search automatically all available channels for the local PBS station, and will select that channel.

4 Exit the Auto Clock Setting

Press the SETUP button on the remote control to return to TV mode.

5 Turn off the TV/DVD/VHS

Turn the TV/DVD/VHS off. Because the Auto Clock functions automatically while the TV/DVD/VHS is off.

If you choose [AUTO],

???the TV/DVD/VHS must search until the PBS chan- nel is found. It must scan each channel for a couple of seconds to determine if that channel is transmit- ting the XDS signal.

???if the time, that is automatically set by this selected PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto Clock Setting feature.

1 Select ???SETTING CLOCK???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???SETTING CLOCK???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK

CHANNEL SET UP

USER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

MANUAL CLOCK SETTING

Make sure ...

??? TV/DVD/VHS power must be turned on.

1 Select ???SETTING CLOCK???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???SETTING CLOCK???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK

CHANNEL SET UP

USER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

8 Start the clock

5:40 PM

Press the SETUP button on the remote control.

Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the

remote control. Use this feature to synchronize the clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the Arrow B or s button.

3)Enter correct numbers using the Arrow K or L button.

4)Press the SETUP button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select ???AUTO CLOCK??? and press the Arrow B or s button to turn [OFF] this function. Then you can manually adjust the clock.

WATCHING A TV PROGRAM

1 Turn on the TV/DVD/VHS

Press the POWER button to turn on the

TV/DVD/VHS.

2 Select the channel number

Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control.

Remember: If the TV/DVD/VHS is connected to a cable box or satellite box, the TV/DVD/VHS must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.

3 Adjust sound

Press the VOLUME X or Y button to adjust the volume.

VOLUME 20

C C C C C C C C C C C C

NOTES:

???If you press the CHANNEL o or pin the DVD mode, you can change the TV channels.

Even if you turn off the TV/DVD/VHS in the DVD mode, when you turn it on again, it will go into the TV/VCR mode.

PICTURE CONTROL

The TV/DVD/VHS???s picture controls ??? BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS ??? are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.

NOTES:

???Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.

???When setting the Picture Control, the Game mode will be cancelled.

Make sure ...

??? TV/DVD/VHS power must be turned on.

1 Select ???PICTURE CONTROL???

Press the PICTURE button on the remote control.

2 Select item you want to adjust

Press the Arrow K or L button until desired control is displayed.

BRIGHT

CONTRAST

COLOR

3 Adjust the picture control

Press the Arrow B or s button to adjust to your desired level.

???If there is a power failure of any kind, the unit will retain its memory for this feature.

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display.

CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.

TEXT mode: By choosing the text mode, you can watch half screen text information if you want. 1-2: You may get these captions or text information by selecting either ???1??? or ???2???. Caption ???2??? is used,

usually for a second language if available.

[TEXT1] or [TEXT2])

INDEX SEARCH

NOTE:

Not all programs are broadcast with closed captions. Your television is designed to provide error free closed captions from high quality antenna, cable and VCR signals. Conversely, poor quality signals are likely to result in caption errors or no captions at all. Common signal conditions which may cause captions errors are listed below:

???Automobile ignition noise

???Electric motor brush noise

???Weak snowy reception on TV screen

???Multiplex signal reception displaying picture ghosts or airplane flutter.

???Playback of poorly recorded or worn VCR tapes.

NOTE:

If the TV/DVD/VHS displays a black box on the TV screen, this means that the TV/DVD/VHS is set to the TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF].

Make sure ...

??? TV/DVD/VHS power must be turned on.

3 Exit the caption setting mode

Press the SETUP button on the remote control to return to TV mode.

TO CANCEL THE CLOSED CAPTION

SYSTEM

Repeat steps [1] and [2], select [OFF] using the Arrow B or s button. Press the SETUP button on the remote control to return to TV mode.

WHEN THE CLOSED CAPTION MODE

IS ON

The On-Screen Display will disappear after 5 sec- onds.

???This is also true when the MUTE button is pressed, and when the PAUSE button is pressed while recording.

???If there is a power failure of any kind, the unit will retain its memory for this feature.

V-CHIP SET UP

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program???s rating meets the limitations you select. In this case, ???PROTECTED PROGRAM by

...??? message appears on the TV screen. You can watch the protected program by entering access code (default 0000).

To block ratings, follow the steps below.

???Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

TV RATING SET UP

Make sure ...

??? TV/DVD/VHS power must be turned on.

???When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

???When you turn ???TV-Y??? to [VIEW], the all ratings will turn to [VIEW] automatically.

When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the Arrow B button, the sub-ratings will appear on the TV screen.

If you select the rating category (example: TV-PG) and turn it [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK].

1 Select ???V-CHIP SET UP???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???V-CHIP SET UP???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER???S SET UP

BV-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

To set the sub-ratings individually, follow the steps below.

??? When you select [TV-Y7]:

??? When you select [TV-PG], [TV-14] or [TV-MA]:

Press the Arrow L or K button to select ???D???(Suggestive Dialog), ???L???(Coarse Language), ???S???(Sexual Situation), or ???V???(Violence). Then, press the Arrow B button to select [BLOCK] or [VIEW].

select [BLOCK] or [VIEW].

Note: When you select [TV-MA], ???D??? does not appear on the TV screen.

menu.

5 Exit the V-Chip setting mode

Press the SETUP button on the remote control to return to original mode.

MPAA RATING SET UP

Make sure ...

??? TV/DVD/VHS power must be turned on.

CHANGE ACCESS CODE

To change access code, follow the steps.

1

1 Select ???V-CHIP SET UP???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???V-CHIP SET UP???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER???S SET UP

BV-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press the SETUP button so that the TV/VCR SETUP display appears on the TV screen.

Use the number buttons to enter 4-

_ _ _ _

digit access code. The default code is 0000.

RRestricted; under 17 requires accompa- nying parent or adult guardian

NC-17 No one under 17 admitted

5

Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen.

???If you enter wrong code, repeat step 5, making sure you enter the same new code exactly in the confirm code space.

NEW CODE

_ _ _ _

CONFIRM CODE

_ _ _ _

NEW CODE

X X X X

CONFIRM CODE

_ _ _ _

select [BLOCK] or [VIEW].

???When you select the rating cate-

gory and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rat- ing will turn [VIEW] automatically.

???When you turn ???G??? to [VIEW], the all ratings will turn to [VIEW] automatically.

5 Exit the V-Chip setting mode

Press the SETUP button on the remote control to return to original mode.

6

Press the SETUP button to exit the TV/VCR SETUP.

Note:

???If you unplug the power code or power failure occures, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.

When you play a VHS tape, or receive a broadcast on the TV/DVD/VHS tuner channel you are watching, the status shown below will appear when you press the DISPLAY button on the remote control.

1] When a program is broadcast in stereo, STEREO appears on the TV screen.

2] When a program is broadcast in second audio, SAP appears on the TV screen.

3] When a program broadcast both in stereo and sec- ond audio, STEREO and SAP appear on the TV screen.

NOTE: Although a program may be broadcast in both stereo and second audio, you cannot record in both stereo and second audio at the same time.

4] While the TV/DVD/VHS is set in HIFI stereo mode and playback mode. HIFI appears on the TV screen. While the TV/DVD/VHS is set in monaural(MONO) mode, HIFI disappears from the TV screen.

NOTE: If you play non-HIFI tapes while the TV/DVD/VHS is set in HIFI, HIFI will dis- appear from the TV screen and the TV/DVD/VHS will play automatically in monaural.

Make sure ...

??? TV/DVD/VHS power must be turned on.

TO SELECT HIFI MODE

TO SELECT MONO MODE

You can change the selection to ???MONO??? if you want to listen to HIFI tapes in normal audio play- back.

1 Select ???USER???S SET UP???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???USER???S SET UP???. Then, press the Arrow Bbutton.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

BUSER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

1)Press the SETUP button on the remote control. Press the Arrow K or L button to point to ???USER???S SET UP???.Then, press the Arrow B button.

2)Press the Arrow K or L button to point to

???VCR AUDIO???. Then, press Arrow Bbutton.

3)Press the Arrow B or s button until [MONO] appears.

4)Press the SETUP button on the remote control to return to TV mode.

TO SELECT STEREO, SAP, OR MONO

1 Select ???USER???S SET UP???

Press the ???SETUP??? button on the remote control.

Press the Arrow K or L button to point to ???USER???S SET UP???.Then, press the Arrow B

button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

BUSER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

4 To return to TV mode

Press the SETUP button on the remote control to return to TV mode.

NOTES:

???Normally, ???HIFI??? should be selected for playback- with HIFI sound.

???When you play non-HIFI tapes, the TV/DVD/VHS will play automatically in the monaural mode.

???The TV/DVD/VHS records automatically MTS broadcasts in HIFI stereo sound unless you select SAP mode recording before you begin recording.

2 Select ???TV AUDIO???

??? USER???S SET UP ???

Press the Arrow K or L button to

3 Select [STEREO], [SAP], or [MONO]

Press the Arrow B or s button until [STEREO], [SAP], or [MONO] appears.

4 To return to TV mode

Press the SETUP button on the remote control to return to TV mode.

NOTES:

???You must select the recording mode,either TV AUDIO [STEREO] or [SAP] when you record a broadcast.

Refer to ???MTS RECORDING/MONITOR MODE???.

???If you select second audio when second audio is not available, the TV/DVD/VHS will record normal audio.

PRECAUTIONS

???Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/DVD/VHS, wait until the tape has warmed to room temperature and the moisture has evaporated.

???Avoid extreme heat, high humidity and magnetic fields.

???Do not tamper with the cassette mechanism.

???Do not touch the tape with your fingers.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/DVD/VHS. The TV/DVD/VHS will automatically turn on.

Window

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play).

The table below shows the maximum recording/play- back time using T60, T120 or T160 tapes in each mode.

Note: You can play back a tape recorded in LP mode

REMOVING A CASSETTE

1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/DVD/VHS. The cassette will eject.

2)Pull the cassette out of the cassette compartment. 3)Store the cassette in its case as shown.

ERASE PREVENTION

(Long Play).

You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.

NORMAL PLAYBACK

Make sure ...

??? TV/DVD/VHS power must be turned on.

1 Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/DVD/VHS will start playback automatically.

2 To begin playback

PLAY B

Press the PLAY button.

3 To stop playback

STOP

Press the STOP button when play- back is completed.

NOTES:

???If you press the TV/VCR side PLAY button in the DVD mode, you can start the VCR playback.

???If you press the SELECT button in the VCR playback, it will stop and the mode will change to the DVD mode. In addition, the same function operates with the DVD side PLAY button or OPEN/CLOSE button.

SLOW MOTION

During pause, press the FWD button to reduce the playback speed. The TV/DVD/VHS mutes the sound during slow motion. Press the PLAY button to return to normal playback.

NOTE: If it is left in the Slow mode for more than five minutes, the TV/DVD/VHS will automatically go into the Stop mode.

PICTURE SEARCH

This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.

1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes)

NOTE:

???If you press the F.FWD or REW button on the front panel in the DVD mode, the VCR forward or reverse will start. Please press the STOP / EJECT button once to stop it, twice to eject it.

2)Press it again and the TV/DVD/VHS will now search in super high speed. (in the LP / SLP modes only)

NOTE:

???Tapes recorded in the SP or LP mode will dis- play a noise bar on the TV screen and the picture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

Make sure ...

???TV/DVD/VHS power must be turned on.

???Insert a prerecorded tape.

???Before playback, follow steps below.

RENTAL PLAYBACK

This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.

AUTO REPEAT PLAY

The TV/DVD/VHS has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button.

ALL REPEAT: Repeat playback from the beginning to the end of the tape.

BLANK REPEAT: Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds.

1 Select ???USER???S SET UP???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???USER???S SET UP???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

BUSER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

1 Select ???USER???S SET UP???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???USER???S SET UP???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

BUSER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

until [ON] appears.

3 Exit the Rental setting

2 Select ???ALL??? or ???BLANK???

Press the Arrow K or L button to point to ???REPEAT PLAY???.

Press the Arrow B or s button repeatedly until your desired selec- tion [ALL] or [BLANK] appears.

??? USER???S SET UP ???

Press the SETUP button on the remote control to return to the TV mode.

4 Start playback

Press the PLAY button to start playback. ???RENTAL PLAY B??? appears.

???Once you select the Rental mode, it stays in effect even after you turn off the TV/DVD/VHS.

TO CANCEL THE RENTAL MODE

Repeat steps [1] and [2], select [OFF] using the Arrow B or s button on the remote control. Press the SETUP button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

3 Exit the Repeat Play setting

Press the SETUP button on the remote control to return to the TV mode.

4 Start playback

Press the PLAY button to start the Repeat Play. ???REPEAT PLAY B??? appears.

???Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/DVD/VHS.

???If the Rental mode is set [ON], the ???RENTAL PLAY B??? display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the Arrow B or s button on the remote control. Press the SETUP button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

Make sure ...

???TV/DVD/VHS power must be turned on.

???Insert a tape.

ZERO RETURN

This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.

NOTE:

Zero Return WILL NOT work on a blank tape or a blank portion of a tape.

???This function will not operate in recording mode.

???This function is not operative when a cassette tape is not inserted in the TV/DVD/VHS.

In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.

1 Insert a tape.

1 Stop a tape at your desired point

Rewind or fast forward the tape to the beginning point at which you want to review.

2 Reset the counter to 0:00:00

Press the COUNTER RESET button repeatedly.

2 Select ???TIME SEARCH??? mode

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???TIME SEARCH???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

BTIME SEARCH

INDEX SEARCH

3 Enter your desired time

Press the Arrow K or L button until TIME SEARCH

your desired time appears. (Example: ???2:50??? stands for 2 hours 50 minutes)

If you wish to cancel the Time

2 : 50

The counter will appear on the TV screen.

The tape will automatically stop when the counter returns to 0:00:00.

TIME SEARCH

The Time Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.

NOTES:

???Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.

Search at this point, press the SETUP button on the remote control.

4 Begin Time Search

By pressing the Arrow s or B button, the TV/DVD/VHS will rewind or fast forward to the specified point.

The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.

TO CANCEL THE TIME SEARCH at this point

Press the STOP/EJECT button on the TV/DVD/VHS or the remote control. This will delete the selected time.

INDEX SEARCH

This feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode.

???The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording and OTR.

???The index mark will not be recorded if the PAUSE button is pressed and released during recording.

???The time gap between making the index marks on the tape should be greater than 1 minute for SP recording, 2 minutes for LP recording and 3 min- utes for SLP recording.

???In some cases, the index mark at the beginning of video tape cannot be detected.

Example: You are watching program number 4 and want to fast forward to program number 7. You must skip three programs.

1 Select ???INDEX SEARCH???

???The Index Search mode will be

canceled if the procedures are not activated in 30 seconds.

3 Begin Index Search

Press the Arrow s or B button. The TV/DVD/VHS begins rewinding or fast forwarding to the beginning of desired program.

NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one.

4 After Index Search

When the preset program is reached, the TV/DVD/VHS will start playback automatically.

???A video cassette must be inserted in the TV/DVD/VHS for this function to work.

???The number of Index Searches can be set up to 20.

???This function will not operate in the recording mode.

???When you want to cancel the Index Search while in progress, press the STOP button.

REAL TIME TAPE COUNTER

This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.)The ????????? indication will appear when the tape has rewound further than ???0:00:00??? on the tape counter.

AUTO REWIND-EJECT

???When the end of a tape is reached during record- ing, playback, or fast-forward, the tape will auto- matically rewind to the beginning. After rewinding finishes, the TV/DVD/VHS will eject the tape and turn itself to off.

???This function is operative when Repeat Play is set to the [OFF] position.

???The tape will not auto-rewind during timer record- ing or One Touch Recording.

NORMAL RECORDING

You can ONLY watch the same TV program that is being recorded.

Remember: If the TV/DVD/VHS is connected to a cable box or satellite

box, the TV/DVD/VHS must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.

2 Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

Press the RECORD button.

SP

4 Stop recording

Press the STOP button when recording is completed.

SKIPPING UNWANTED

SCENES DURING RECORDING

NOTES:

SP

???After five minutes, the

TV/DVD/VHS will automatically switch to the Recording mode to prevent tape damage.

???If ???CLOSED CAPTION (ON)??? is selected, the On- Screen Display will appear for 5 seconds, then dis- appear.

Press the REC/OTR button on the TV/DVD/VHS as many times as needed. The recording length will

be determined by the number of SP

times you press the REC/OTR button. Each addition- al push will increase the recording time by 30 min- utes. It is set up to 8 hours.

5)Press the RECORD button on the TV/DVD/VHS. 6)Begin playback of the tape in the source (Playing)

VCR or camcorder.

NOTE: For best results during copying, use the TV/DVD/VHS???s front panel controls whenever pos- sible. The remote control might affect the source (Playing) VCR???s playback operation.

AUTOMATIC TIMER

RECORDING

You may set the TV/DVD/VHS to start and end a recording while you are away. You can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period.

In the example below, the timer is being set to record:

DATE:July 6th, 2001

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL: CH61

TAPE SPEED: SP

Make sure ...

pressing the Arrow K button. And press the Arrow B button.

??? If you have not yet set the clock,

???MANUAL CLOCK SET??? appears. If so, follow stops [3] to [8] on page 18. Then set the timer recording.

3 Set the channel number

Press the Arrow K or L button until the desired channel number appears.

(Example: CH61)

Then, press the Arrow B button.

??? TIMER PROGRAMMING ???

Avoid over lap of programs ...

There is a chance that a program will not be record- ed. when programs overlap;

???The program with an earlier start has priority.

???Once the earliest program finishes, the overlapping programs will begin recording in sequence.

???The illustration below demonstrates the sequence of recordings.

Program 1 10:00AM - 11:00AM Program 2 9:00AM - 10:00AM Program 3 9:30AM - 12:00PM

Recording Sequence

Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM

*Recording period is SHADED

1 Select ???TIMER PROGRAMMING???

Press the SETUP button on the remote control. Confirm ???TIMER PROGRAMMING??? is pointed by

Remember: If the TV/DVD/VHS is connected to a cable box or satellite box, the TV/DVD/VHS must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

until the desired date appears.

(Example: ???7/06??? for July 6th). Then, press the Arrow B button.

For every day recording : To record a TV program at the same time on the same chan-

nel every day. (Example: Monday

For weekly recording : To record a TV program at the same time on the same channel

day of the week appear together. Then, press the Arrow B button.

10 Finish setting the program

Press the Arrow B or s button. The program is now completed.

???To set another program, repeat steps [2] to [10].

???Press the SETUP button on the remote control to return to original mode.

11 Set the timer

Press the POWER button to set automatic timer recording. The TIMER REC indicator lights up.

???You must turn off the TV/DVD/VHS to activate automatic timer recording.

If power is not turned off and you continue watch- ing TV, ???TIMER REC STANDBY??? starts flashing on the TV screen 2 minutes before the programmed start time.

TIMER PROGRAM EXTENSION

To shift the time schedule of an automatic timer recording.

1)Press the POWER button. 2)Repeat step [1] on page 32.

3)Press the RECORD button and select the desired program using the Arrow K or L button.

4)Press the RECORD button again.

Each additional push will shift forward the begin/end time for recording by 10 minutes. When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press the PAUSE but- ton on the remote control. The recording time returns to the original time.

NOTE: When you shift forward the time schedule during recording, the recording speed will automati- cally be set to the SLP mode.

5)Press the Arrow B or s button to exit the setting menu. Then press the SETUP button on the remote control to return to original mode.

TO CORRECT A PROGRAM

???While setting a program; press the Arrow s but- ton to go back one step and enter the correct num- bers using the Arrow K or L button.

???After setting a program;

1)Press the POWER button. 2)Repeat steps [1] - [2] on page 32.

3)Press the Arrow B button (or press the Arrow s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the Arrow K or L button.

4)Press the POWER button to set automatic timer recording.

TO CANCEL AN AUTOMATIC TIMER

RECORDING

???After setting a program;

1)Press the POWER button.

2)Repeat steps [1] ~ [2] on page 32 and select a program you want to cancel.

3)Press the C.RESET button.

4)Press the SETUP button on the remote control to return to TV mode.

???While recording is in progress;

1)Press POWER button.

2)Press the STOP/EJECT button on the TV/DVD/VHS.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator goes off.

2)Press the SETUP button on the remote control. 3)Confirm ???TIMER PROGRAMMING??? is pointed. 4)Press the Arrow B button. The details of programs

appear on the TV screen.

5)Press the SETUP button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

???Make sure the channel you want to record is prop- erly set in advance.

???It is not necessary to press the RECORD button for timer recording.

???Recording begins automatically at the Start time.

???If you are recording using a Timer mode, you may not operate the unit manually.

???The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).

???If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off.

???If the tape runs out before the end time, the TV/DVD/VHS will switch to the Stop mode imme- diately, and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.

3 Auto Return will begin

When all the timer recordings are completed, the TV/DVD/VHS will rewind to the beginning of the recorded program(s).

NOTE:

???If you press the POWER button while tape is rewinding, the Auto Return will stop.

4 Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN

MODE

Repeat steps [1] and [2], select [OFF] using the Arrow B or s button.

If there is a power failure of any kind, the unit will retain its memory for this feature.

SLEEP TIMER

The Sleep Timer function turns off the TV/DVD/VHS without using the POWER button after a desired period of time.

NOTE:

???This function does not operate during Recording mode.

1 Select ???SLEEP TIMER???

Press the SLEEP button on the remote control until ???SLEEP TIMER??? appears.

2 Set sleep time

1 Select ???USER???S SET UP???

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to ???USER???S SET UP???. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

BUSER???S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press the SLEEP button until your desired sleep time appears.

Each additional push will increase the time by 30 minutes up to 120 minutes.

SLEEP 120 MINUTES

After 5 seconds, exit the Sleep

Timer setting.

TO CANCEL THE SLEEP TIMER

Press the SLEEP button on the remote control until ???SLEEP TIMER??? appears. Press the SLEEP button until ???SLEEP 0 MINUTES??? appears.

When the Closed Caption mode is OFF:

???Counter mode: After 5 seconds, only the counter remains. To clear it, press the DISPLAY button.

???Clock mode: After 5 seconds, only the clock and the channel number remain. To clear them, press the DISPLAY button.

When the Closed Caption mode is ON:

???The On Screen Display disappear after 5 seconds.

???This is true even if the MUTE button is pressed, or the PAUSE button is pressed while recording.

The following discs can be played back on this DVD player.

[DVD]

Data on a DVD is divided into sections called "titles", and then into subsections called "chapters", each of which is given a title or chapter number. Playback conditions are preset on some DVD video discs, and these playback con- ditions take priority over user operations on this player. If a function you selected do not run as desired, refer to the manual accompanying the disc.

Example

This player conforms to the NTSC color system. You can- not play discs recorded in other color systems such as PAL or SECAM.

??Some discs include region codes as shown below.

??The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be played back on DVD players with the same region code.

The following discs cannot be played back on this DVD player.

??DVD with region codes other than 1 or ALL. ??DVD-ROM

??DVD-RAM (Never play back, otherwise malfunction may result.)

??CD-ROM ??VSD

??CDV (Only plays back the audio part.) ??CD-G (Only plays back the sound.)

??CD-R/CD-RW

(Only plays back the discs which audio CD and MP3 is recorded.)

??CD-I

(Never play back, otherwise malfunction may result.)

??SACD

??Photo CD

(Never play back, otherwise malfunction may result.)

Any other discs without compatibility indications

[AUDIO CD]

Data on an audio CD is divided into sections called ???tracks???, each of which is given a track number.

Example

[MP3]

Data on a MP3 is divided into sections called "albums", and then into subsections called "tracks", each of which is given an album or track number.

Example

PLAYING A DVD VIDEO

OR AN AUDIO CD

DVD CD

Getting started

Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.)

1Press the POWER button.

??The power will turn on.

2Press the OPEN/CLOSE button.

??The disc loading tray will open.

3Place a disc into the tray.

??Make sure the disc is sitting properly in the correct recess, with the label side up.

??If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.

??With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.

??During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a mal- function.

USING THE DVD MENUS

DVD

Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.

1Press the DISC MENU button.

??The DVD menu will appear.

2Select the desired title.

??Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

??The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

??When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to ???USING THE TITLE MENU???.

5 Press the STOP button to stop play.

Notes

??If you press the OPEN/CLOSE button in the TV/VCR mode or power-off, the DVD tray will open.

??If you press the DVD side PLAY button in the TV/VCR mode or power off, you can start the DVD playback.

??A ???prohibited icon??? may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc.

USING THE TITLE MENU

DVD

With a DVD containing a title menu, you can select desired titles from the menu.

1Press the TITLE button.

??The title menu will appear.

2Select the desired title.

??Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

CALLING UP A MENU SCREEN

DURING PLAYBACK For DVDs

??Press the DISC MENU button to call up the DVD menu.

??Press the TITLE button to call up the title menu.

Note

??Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details.

RESUMING PLAYBACK FROM

THE POINT WHERE

PLAYBACK STOPPED

DVD CD

PAUSING PLAYBACK OR

DISPLAYING A STILL PICTURE

DVD CD

1 Press the PAUSE button during playback.

1 Press the STOP button during playback.

??Playback will stop, and then appear the resuming message at

Press 'PLAY' to play from here. the center.To play the beginning, press 'STOP' first

and then 'PLAY'.

??Playback will pause, with sound muted.

F

2Press the PLAY button. Playback will start from the point where the previous playback session was stopped.

B

Notes

??Resuming playback is not available with some discs.

??It is possible to switch from the DVD play mode to the TV mode. Even if the power is turned off, the resume function enables to playback on from the previously interrupted point. But note that the Marker commands are not saved.

??The resume function can be reset by pressing the STOP button twice or by opening the disc loading tray.

2 Press the PLAY button to resume playback.

B

STEPPING THROUGH FRAMES

DVD

1Press the PAUSE/STILL button while play- back is paused.

played with sound muted each time the button is pressed.

SLOW MOTION

DVD

1Press and hold the gbutton for more than 1 second while playback is paused. (Sound remains muted.)

??Slow motion mode will be activated.

??Pressing and holding the g button for more than 1 second cycles the playback speed in three steps. Select an appropriate speed while referring to the speed indication on the screen.

STARTING FROM A DESIRED

TIME COUNT

DVD CD

1Press the SEARCH MODE button twice.

2Press the numeric buttons to set the desired time count.

TIME 1:23:30

TOTAL 1:23:45

??Example: 1 hour, 23 minutes and

30 seconds

1 ??? 2 ??? 3 ??? 3 ??? 0

D Button

2Press the PLAY button to return to normal playback speed.

Notes

??Slow playback is not available with audio CDs. ??The reverse of slow playback is not available.

??If you press the g button and release immediate- ly during playback is paused or slow, it returns to normal playback.

Notes

??In the case of DVD, Time Search in Title is effec- tive. (But Time Search in Chapter is ineffective.)

??In the case of CD, Time Search in Track is effective. (But Time Search in the entire disc is ineffective.)

??Playback from a desired time count is not available with some discs or if the unit is in stop mode.

??If wrong numbers are entered, press the CLEAR button and re-enter the correct numbers.

DVD CD

1 Press the REPEAT button.

For DVDs

??A single title or chapter is played back repeatedly.

DVD CD

You can define a section to be played back repeatedly.

1 Press the A-B REPEAT button during playback.

??The starting point (A) will then be REPEAT

??Pressing the REPEAT button cycles the display on the screen as follows.

selected.

[ A - ]

For audio CDs

??The whole disc or a single track is played back repeatedly.

??Pressing the REPEAT button cycles the display on the screen through Off, Track and All.

If the REPEAT button is pressed once dur- ing program/random playback, the pro- gram/random playback is performed repeatedly.

If the REPEAT button is pressed again, the current track is played back repeatedly.

Notes

??Repeat playback is not available with some discs.

??The REPEAT setting will be cleared when moving to other title, chapter or track.

??Repeat playback is not function during A-B repeat playback.

2Press the A-B REPEAT button again at the end point (B) of the desired section.

3To exit A-B repeat playback, press the A-B REPEAT button and set it to OFF.

REPEAT [ OFF ]

Notes

??With DVDs, the A-B repeat section can be set only within the current title.

??With audio CDs, the A-B repeat section can be set within the current track.

??A-B repeat is not available with some scenes in DVD.

??To cancel the A point which was set, press RETURN button.

??A-B repeat playback is not function during title, chapter, track or all repeat playback had set.

You can define the part to be called back.

1Press the SEARCH MODE button three times during playback.

Set the marker

??Using the cursor (s/ B) button, position the cursor on to the marker number shown as ???NOT SET???. Press the ENTER button when the screen to be reviewed appears. The marked

time will be displayed. Up to 5 points can be marked.

Call back the marker

??Using the cursor (s/ B) button, position the cursor on to the marker number to be called back and press the ENTER button.

Clear the marker

??Using the cursor (s/ B) button, position the cursor on to the marker number to be cleared and press the CLEAR button.

To clear all markers, place the cursor on ???AC??? (All clear markers) and press the ENTER button.

2Press the SEARCH MODE button or the RETURN button to exit the display.

1 Press the MODE button in stop mode.

2Press the numeric buttons to enter the desired track numbers.

3 Press the PLAY button.

??Playback will start in the programmed order.

??While the program is being played back, the STOP button works as follows.

??Press the STOP button once and then the PLAY button again, playback will restart from the point where the STOP button was pressed. (Program continued)

??Press the STOP button twice and then the PLAY but- ton again, playback will restart from the track in the usual way. (Program cleared)

Notes

??Adding programs is not possible during program playback. You must stop the current playback before such operations can be carried out.

??Press the CLEAR button to cancel a program. The most recently entered program will then be deleted.

??Up to 99 programs can be entered.

??Playback from a desired track and random playback are not available during program playback.

??Program settings are cleared when the power is turned off or the disc loading tray is opened.

??Press the MODE button to check the programmed setting.

RANDOM (Audio CD)

CD

1 Press the MODE button in stop mode.

??The program setting menu screen will appear.

2 Press the MODE button again.

RANDOM

START : PLAY EXIT : MODE

3Press the PLAY button. Random playback will then start.

Note

??Program playback is not available during random playback.

ZOOM PLAYBACK (enlargement onscreen)

DVD

Images can be enlarged four times on the screen to your taste.

1 Press the ZOOM button during playback.

??An image will be enlarged at the center of the screen.

??Press the ZOOM button again, and the image will be back to the previous size.

2When the cursor (K/ L/ s / B) button is pressed during zoom play, the part to be zoomed moves.

??The zooming frame can be moved from the center

.... 4 steps to the right. 4 steps to the left. 4 steps to the top. 4 steps to the bottom when 2 time zooming. The frames will move 6 steps when 4 time zooming.

??Current position will be displayed on the right-bot- tom of the screen. Press the ENTER button, and the display disappears.

Note

??Zooming function does not work while disc menu is shown.

PLAYING AN MP3 DISC

MP3

??If all the TRACKS cannot be displayed at once on the screen, ???L??? appears to go to the next page. If there is a previous page, ???K??? appears on-screen. On the left of ???L???, the current page and the total num- ber of pages are displayed.

??The player can recognize 255 ALBUMS and TRACKS altogether.

2Using the K/L buttons, select a ALBUM or

TRACKS to be played.

Press the B button. The TRACK selection screen shows up. Using the K/L buttons, select TRACKS to be played.

??Choose ???FIRST PLAY???, and the ALBUMS and TRACKS will be played from the beginning of the disc.

??Press the TITLE button, and the top hierarchy will be called back.

??ALBUMS can be played up to the 8th hierarchy.

3 Press the PLAY button.

??Playback will start.

4 To stop the play, press the STOP button.

CHANGING THE ONSCREEN

DISPLAY DURING MP3 DISC PLAY

MP3

The information on an MP3 disc in play can be checked.

1 Press the DISPLAY button during playback.

??The TRACK currently in play

FOLDER NAME

will be highlighted.

TRACK11

TRACK12

TRACK13

TRACK14

TRACK15

2 Press the DISPLAY button again.

??The ALBUM name being displayed will be replaced by the elapsed time of the track.

?? will be displayed when the repeat play has been selected.

A : Album (folder) repeat

TRACK11

D : Disc repeatTRACK12

TRACK13

TRACK14

TRACK15

3Press the DISPLAY button again, and the dis- play screen disappears.

PLAYING AN MP3 DISC FROM A

DESIRED TRACK

MP3

1Press the SEARCH MODE button during play- back.

Notes

??During play, a desired track can be directly searched. Just type in the TRACK number with the numerical buttons.

??If the typed TRACK number is not available, the ???disable??? symbol appears and the direct search mode is cancelled.

??Playback cannot be started from a desired time count.

PLAYING AN MP3 DISC IN A

PROGRAMMED WAY

MP3

1 Press the MODE button in STOP mode.

??The program screen shows up.

PROGRAM FOLDER NAME

2Using the K/L buttons, select a track. Then press the ENTER button to save it in a pro-

gram.

PROGRAM - ALBUM01

??The programmed track is displayed in the right-hand screen.

??When the sbutton is pressed, the album stop in the current left-hand screen will be highlighted.

??If the entire program cannot be displayed at once on the screen, ???L??? appears to go to the next page.

3When the disc has been programmed, press the PLAY button.

??Programmed play starts.

PROGRAM - ALBUM05

??The SEARCH menu shows up. ??A track currently in play or under

RESUME ON will be highlight- ed. In the case of RESUME OFF, the first track of the disc will be highlighted.

??Press the RETURN button, and the SEARCH menu disappears.

ALBUM NAME

+ALBUM51 TRACK11 +ALBUM52 TRACK52 TRACK51 TRACK31 TRACK52 TRACK22 TRACK63 TRACK03

Notes

??Press the CLEAR button, and the last-programmed entry will be deleted.

??Press the RETURN button, and the STOP screen will show up with the program contents in memory.

2Using the K/L buttons, select a track to be played. Then press the PLAY button to start playing.

??The program setting will be cancelled when the power is turned off or the disc tray is opened.

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

DVD CD

The DVD player has a function which allows you to select the desired audio language and sound mode.

For DVDs

Press the AUDIO button during playback, and then press the AUDIO button to select the desired audio language.

AUDIO STEREO

Both right and left channels are active (stereo).

AUDIO L-CH

Only the left channel is active.

AUDIO R-CH

Only the right channel is active.

??The audio language can be changed if multiple languages are recorded on the DVD being played.

AUDIO 1.ENG DolbyD 5.1CH 48k/3

AUDIO 2.FRE DolbyD 5.1CH 48k/3

AUDIO 3.JPN DolbyD 5.1CH 48k/3

Notes

??Pressing the Audio button may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc.

??Current audio language and sound mode will be dis- played when you press the AUDIO button at first.

??If a desired language is not shown after pressing the Audio button several times, the disc does not have an audio source in that language.

For audio CDs

Press the AUDIO button during playback.

??Pressing the AUDIO button cycles the sound mode through STEREO, L-CH and R-CH.

??The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected.

??The screen display will disappear after about 5 seconds.

??If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed.

CHANGING THE SUBTITLE

LANGUAGE

DVD

The DVD player has a function which allows you to select the desired language for subtitles.

1Press the SUBTITLE button during playback, and then press the SUBTITLE button to select the desired subtitle language.

??The subtitle language can be changed if the subtitles are recorded in multiple languages on the DVD being played.

??The subtitle language cannot be changed if the subtitles are recorded in a single language on the DVD being played.

SUBTITLE 1.ENG/6

Subtitle 1

SUBTITLE 2.FRE/6

Subtitle 2

SUBTITLE OFF

OFF

??Pressing the SUBTITLE button cycles the subtitle language from SUBTITLE 1, SUBTITLE 2 and all the languages recorded.

??Current subtitle mode will be displayed when you press the SUBTITLE button at first.

??Press the SUBTITLE button, and then press the cur- sor (s/ B) button to set it to on or off.

??It may take time to display the subtitles in the selected language.

??The screen display will disappear after about 5 seconds.

??When ???SUBTITLE NOT AVAILABLE??? appears onscreen, it means no subtitle is recorded on the scene.

CHANGING THE CAMERA

ANGLE (Multi-Angle Pictures)

DVD

The DVD player has a function which allows you to select the desired camera angle.

1 Press the ANGLE button during playback.

??If the disc contains sequences recorded from differ- ent camera angles, the angle icon ( ) will appear at the top-right of the screen. You can change the camera angle when the icon appears on the screen.

??The camera angle cannot be changed if the disc does not contain sequences recorded from different camera angles.

2Press the ANGLE button while the angle number is shown on the screen.

ANGLE 1 / 8

Angle 1

ANGLE 2 / 8

Angle 2

Notes

??Some discs allow subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.)

??If the desired language is not shown after pressing the SUBTITLE button several times, the disc does not have subtitles in that language.

??The subtitle language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected.

ANGLE 8 / 8

Angle 8

Note

??The screen display will disappear after about 5 seconds.

??Current camera angle will be displayed when you press the ANGLE button at first.

CHANGING THE ON-SCREEN

DISPLAY

DVD CD

You can check the information about the disc by pressing the DISPLAY button on the remote control.

For DVDs

1 Press the DISPLAY button during playback.

CH 7/49 0:01:46 - 0:03:27

2 Press the DISPLAY button again.

??Use the number button to start from a desired track.

2 Press the DISPLAY button again.

??Use the number button to start from a desired chap- ter.

3 Press the DISPLAY button again.

Layer number(*)

L0: Layer 0 is playing back

L1: Layer 1 is playing back Current Repeat setting

C: Chapter repeat

T: Title repeat A B: A-B repeat

*) It appears when the layered disc is playing back.

4Press the DISPLAY button or the RETURN but- ton to exit the display.

For audio CDs

1 Press the DISPLAY button during playback.

3Press the DISPLAY button or the RETURN but- ton to exit the display.

BLACK LEVEL SETTINGS

DVD

You can set to make the black parts of the picture brighter.

1 Press the MODE button during playback.

??The setup screen will appear.

BLACK LEVEL : OFF

2 Press the ENTER button to set it on or off.

??ON : It makes the dark parts brighter.(Default : OFF) OFF : Original picture which is recorded on the disc will be shown.

??Press the RETURN button to exit the display.

TruSurround SETTINGS

You can enjoy stereophonic sound system when you playback Dolby Digital and PCM 48kHz sound.

1 Press the MODE button twice during playback.

2 Press the ENTER button to set it on or off.

ON : TruSurround ON.(Default : OFF)

OFF : TruSurround OFF.

??Press the DISPLAY button or the RETURN button to exit the display.

LANGUAGE SETTINGS

1 Press the SETUP button in STOP mode.

??The setup screen appears.

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

2Press the K/Lbuttons to select Language, and then press the ENTER button.

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

3Press the K/Lbuttons to select an item, and then press the ENTER button.

AUDIO:

(Voice is played back in selected language.)

SET-UP

LANGUAGE CONTROLS

SUBTITLE:

(Subtitles are shown in selected language.)

SET-UP

LANGUAGE CONTROLS

4Press the K/L buttons to select a desired item, and then press the ENTER button.

??If ???OTHER??? is selected on the AUDIO, SUBTITLE or DISC MENU setting screen, the Language Code setting screen will appear. Press the numeric buttons to enter the desired language code while referring to the list on page 51.

SET-UP

LANGUAGE CONTROLS

DISC MENU

LANGUAGE CODE

Please enter a 4-digit Language code.

- - - -

5 Press the SETUP button.

??The setup mode will be canceled and the ordinary screen will appear.

Note

??Be sure to press the SETUP button, or the setting will not work.

??Language Setting for Audio and Subtitle is not avail- able with some discs. Then use the Audio and Subtitle button. Details are on pages 44 and 45.

??You can also select the item by pressing the numbers which displayed with the item.

??When you change the setup items, press the STOP button if you are in playback mode.

DISPLAY SETTINGS

1 Press the SETUP button in STOP mode.

AUTO POWER OFF (Default : ON)

Set or not set to turn off after the screen saver is started and no keys are pressed for 30 minutes.

SET-UP

DISPLAY CONTROLS

2Press the K/L buttons to select DISPLAY and then press the ENTER button.

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

BACKGROUND COLOR (Default : BLACK) Select blue or black.

SET-UP

DISPLAY CONTROLS

3Press the K/Lbuttons to select an item, and then press the ENTER button.

TV MODE (Default : 4:3 LETTER BOX)

4:3 LETTER BOX : Wide screen with black bars on top and bottom

4:3 PAN & SCAN : Full height picture, trimmed both sides

SET-UP

DISPLAY CONTROLS

SET-UP

DISPLAY CONTROLS

TV MODE

1.4:3 LETTER BOX 2.4:3 PAN & SCAN

4Press the K/L buttons to select a desired item, and then press the ENTER button.

5Press the SETUP button.

??The setup mode will be canceled and the ordinary screen will appear.

Notes

??Be sure to press the SETUP button, or the setting will not work.

??You can also choose the item by pressing the num- bers.

AUDIO SETTINGS

1 Press the SETUP button in STOP mode.

2Press the K/L buttons to select Audio and then press the ENTER button.

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

SELECT: / SET: ENTER

EXIT: SETUP CANCEL: RETURN

3Press the K/Lbuttons to select an item, and then press the ENTER button.

DRC (Default : OFF)

On : DRC

(Dynamic Range Control)

??This function is for controlling the range of sound volume. By compressing the range of sound volume, it is possible not only to suppress the output of loud sound at night and but also to raise the volume of low sound.

??This function is effective only for the sound record- ed by Dolby Digital recording.

SET-UP

AUDIO CONTROLS

Dolby Digital (default : ON)

On : Output by Dolby Digital

Set to On when the unit is connected to Dolby Digital Decoder.

SET-UP

AUDIO CONTROLS

DTS (Default : OFF)

On : Output DTS sound

Set to On when the unit is connected to DTS Decoder.

SET-UP

AUDIO CONTROLS

SELECT: / SET: ENTER

EXIT: SETUP CANCEL: RETURN

Down Sampling (Default : AUTO) Set the output for the DVD

recorded in PCM 96kHz (96kHz or 48kHz)

??Press the K/Lbuttons to select an item, and then press the ENTER button.

SETUP MENU

When playing a disc with copyright protection

??If you select 96KHz, copyright protection will be activated and no sound will come out. If you select AUTO, sound will be down sampled at 48KHz.

4 Press the SETUP button.

??The setup mode will be canceled and the ordinary screen will appear.

PARENTAL LOCK

1 Press the SETUP button.

??The setup screen will appear.

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

2Press the K/Lbuttons to select PARENTAL, and then press the ENTER button.

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

When ???PARENTAL LEVEL??? is selected

??Press the K/Lbuttons to select an item from ???ALL??? or 8 to 1 and then press the ENTER button.

SET-UP

PARENTAL CONTROLS

PARENTAL LEVEL

ALL 8

7 [NC-17]

6 [R]

5

SELECT: / SET: ENTER

EXIT: SETUP CANCEL: RETURN

When ???CHANGE??? is selected

??Press the numeric buttons to enter the 4 digits pass- word. Then press the ENTER button.

SET-UP

PARENTAL CONTROLS

PASSWORD

Please enter current password.

- - - -

3Press the numeric buttons to enter the 4- digit password, and then press the ENTER button.

??When doing this for the first time, enter any 4 digits. (except for 4737) That number will be used as the password from the second time onward.

??By entering the password, you can then change the control level and password settings.

SET-UP

PARENTAL CONTROLS

PASSWORD

Please enter a 4-digit password.

- - - -

5 Press the SETUP button.

??The setup mode will be canceled and the ordinary screen will appear.

CONTROL LEVELS

??ALL

All parental lock is cancelled.

??Level 8

DVD software of any grade (adult/general/children) can be played back.

??Levels 7 to 2

Only DVD software intended for general use and children can be played back.

4Press the K/L buttons to select an item, and then press the ENTER button.

SET-UP

PARENTAL CONTROLS

??Level 1

Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.

1.PARENTAL LEVEL ALL 2.CHANGE

Notes

??With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

??Record the password in case you forget it.

IF YOU FORGET THE PASSWORD

1) Press the 4, 7, 3, 7 at step 3.

??Password will be cleared and parental level will be set to ALL.

2) Proceed the above steps 3-5 again.

CABINET CLEANING

???Wipe the front panel and other exterior surfaces of the TV/DVD with a soft cloth immersed in luke- warm water and wrung dry.

???Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

???Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

???Playback picture may become blurred of interrupt- ed while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem.

If a streaky or snowy picture appears during play- back, the video heads in your TV/DVD/VHS may need to be cleaned.

1.Please visit your local Audio/Video store and pur- chase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the prob- lem, please call our help line at 1-800-968-3429, to locate an Authorized Service Center.

NOTES:

???Remember to read the instructions included with the video head cleaner before use.

???Clean video heads only when problems occur.

SERVICING

???Should your TV/DVD become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800- 968-3429, to locate an Authorized Service Center.

DISC HANDLING

???Use discs which have the following logos on them. (Optical audio digital discs.)

???Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

???Always store the disc in its protective case when it is not used.

???To clean-off, use a soft cloth.

???Do not use a hard cloth since this will mar the disc.

???Wipe the disc in a straight line from center to edge.

???Never wipe with a circular motion.

???Do not use detergent or abrasive cleaning agents.

GENERAL SPECIFICATIONS

TV/VCR

DVD

ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

INDICE

??? CONTROLES DE OPERACI??N Y FUNCIONES . . . . . 58

PANEL FRONTAL DEL televisor/DVD/VHS . . . . . . . . . 58 MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 58 VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

??? PREPARACI??N PARA LA UTILIZACI??N . . . . . . . . . . 60

CONEXIONES DE ANTENA/TELEVISI??N

POR CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 INSTALACI??N DE LAS PILAS. . . . . . . . . . . . . . . . . . . 60

CONEXI??N A TOMAS DE ENTRADA EXTERNA. . . . 60 MODE DE ENTRADA EXTERNA. . . . . . . . . . . . . . . . . 60 CONEXI??N A UN SISTEMA EST??REO (Para DVD) . . 60

CONEXI??N A UN AMPLIFICADOR EQUIPADO CON

TOMAS DE ENTRADA DIGITAL PARA, POR EJEMPLO, PLATINA MD O PLATINA DAT (Para DVD). . . . . . . . . 60

CONEXI??N A UN DECODIFICADOR DOLBY DIGITAL,

DECODIFICADOR DTS O DECODIFICADOR MPEG (Para DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

TV SECTION

??? PREPARACI??N PARA LA UTILIZACI??N . . . . . . . . . . . . 62

SELECCI??N DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 62 PREAJUSTE DE CANALES. . . . . . . . . . . . . . . . . . . . . . 62

DVD SECTION

??? REPRODUCCI??N DE UN DISCO . . . . . . . . . . . . . . . . 63

REPRODUCCI??N DE UN DVD DE V??DEO O UN CD DE AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

CONTROLES DE

OPERACI??N Y FUNCIONES

PANEL FRONTAL DEL

TELEVISOR/DVD

Consulte la figura 1 de la p??gina 9

MANDO A DISTANCIA

Consulte la figura 2 de la p??gina 9

VISTA POSTERIOR

Consulte la figura 3 de la p??gina 10

1.Bot??n POWER

P??lselo para conectar y desconectar la alimentaci??n.

2.Botones VOLUME X/Y

P??lselos para controlar el nivel del volumen para el DVD y el televisor.

3.Botones SKIP (para DVD)

Salta cap??tulos o pistas hasta un punto deseado.

4.Bot??n PLAY

Inicia la reproducci??n del contenido del disco o la cinta.

5.Bot??n STOP

Detiene la operaci??n del disco o la cinta.

6.Bot??n OPEN/CLOSE

P??lselo para insertar discos en la bandeja o retirarlos de ella.

7.Bandeja de carga del disco

8.Indicador de DVD

Parpadea durante el modo del DVD.

9.Bot??n SELECT

P??lselo para cambiar a un modo de televisor, modo de entrada externa o modo de DVD.

10.Indicador del televisor/ la videograbadora (TV/VCR)

Parpadea durante el modo del televisor/ la videograbadora

11.Botones CHANNEL K/L

P??lselo para seleccionar el canal memorizado. P??lselo para cambiar a un modo de televisor cuando modo de DVD.

12.Indicador de grabaci??n (RECORD)

Parpadea durante la grabaci??n.

Se enciende en el modo de espera de la grabaci??n con temporizador.

Bot??n de grabaci??n de un toque (OTR)

Activa la grabaci??n de un toque. (S??lo en el televi- sor/DVD/VHS)

13.Bot??n de grabaci??n (REC)

P??lselo para iniciar la grabaci??n manual.

14.Bot??n de rebobinado (REW) (para televisor/ videograbadora)

P??lselo para rebobinar la cinta, o para ver la imagen en retroceso r??pido durante el modo de reproducci??n. (B??squeda con rebobinado)

15.Bot??n de avance r??pido (FWD) (para televisor/ videograbadora)

P??lselo para avanzar r??pidamente la cinta, o para ver la imagen en avance r??pido durante el modo de reproduc- ci??n. (B??squeda con avance r??pido)

16.Bot??n de parada (STOP)

P??lselo para detener la cinta.

Bot??n de expulsi??n (EJECT)

P??lselo en el modo de parada para expulsar la cinta del televisor/videograbadora.

17.Ventanilla del sensor del mando a distancia

18.Toma HEADPHONE

Para conectar auriculares (no suministrados) y escuchar en privado.

19.Toma de entrada VIDEO

Conecte aqu?? la toma de salida de v??deo de una videoc??mara o de una videograbadora.

20.Tomas de entrada AUDIO L/R

Conecte aqu?? las tomas de salida de audio de una videoc??mara o de una videograbadora.

21.Compartimiento del videocasete

22.Bot??n PICTURE

Presione para entrar en el modo de ajuste de ima- gen.

23.Botones de n??meros

Modo del televisor:

Pulse dos d??gitos para tener acceso directamente al canal deseado.

Recuerde pulsar "0" antes de elegir un canal de un solo d??gito.

Bot??n +100

P??lselo para seleccionar canales de televisi??n por cable cuyo n??mero sea igual o superior al 100.

Modo DVD:

P??lselo para introducir el n??mero deseado.

Bot??n +10

P??lselo para introducir los n??meros deseados cuyo n??mero sea igual o superior al 10.

24.Bot??n PAUSE

Hace una pausa en la operaci??n del disco o la cinta.

25.Bot??n de velocidad de cinta (SPEED)

P??lselo para elegir la velocidad de grabaci??n deseada: SP/SLP.

26.Bot??n C-RESET

P??lselo para reponer el contador a 0:00:00.

27.Bot??n DISPLAY

Modo del televisor/ la videograbadora:

P??lselo para visualizar el n??mero del canal en la pantalla. Si lo pulsa de nuevo, el n??mero del canal desaparecer??.

Modo de DVD:

Visualiza el estado actual en la pantalla del televi- sor con fines de comprobaci??n.

28.Bot??n SETUP

P??lselo para activar o salir del modo de men??s de televisor o preparaci??n de DVD.

29.Bot??n TITLE

Visualiza el men?? de t??tulos.

30.Bot??n CLEAR

Repone un ajuste.

31.Bot??n MODE

Activa el modo de reproducci??n programada o el modo de reproducci??n aleatoria.

32.Bot??n SEARCH MODE

P??lselo para localizar un punto deseado.

33.Bot??n AUDIO

P??lselo para seleccionar un idioma de audio o un modo de sonido deseado.

34.Bot??n SUBTITLE

P??lselo para seleccionar un idioma de subt??tulos deseado.

35.Bot??n REPEAT

Repite la reproducci??n del disco, t??tulo, cap??tulo o pista actual.

36.Bot??n ANGLE

P??lselo para cambiar el ??ngulo de la c??mara y verde, desde un ??ngulo diferente, la secuencia que est?? siendo reproducida.

37.Bot??n A-B REPEAT

Repite la reproducci??n de una secci??n seleccionada.

38.Bot??n RETURN

Para volver a la operaci??n anterior.

39.Bot??n ENTER

P??lselo para establecer un ajuste.

40.Botones de flechas Modo de televisor:

P??lselo para seleccionar un modo de ajuste desde el men?? que aparece en la pantalla del televisor. P??lselo para seleccionar o ajustar desde un men?? particular.

Modo de DVD:

Se utiliza cuando se hacen ajustes mientras se observa la visualizaci??n en una pantalla de televisor.

41.Bot??n DISC MENU

Visualiza men??s de DVD.

42.Bot??n ZOOM

Amplia parte de una imagen de DVD reproducida.

43.Bot??n MUTE

Pulse el bot??n MUTE para apagar el sonido de un programa de TV. La visualizaci??n del nivel del sonido cambia de ROJO CLARO a AZUL CLARO.) Pulse de nuevo el bot??n MUTE o el bot??n VOL K o L para restaurar el sonido.

44.Bot??n SLEEP

Ajusta el temporizador para dormir.

45.Bot??n SELECT

Pulse para cambiar entre los modos TV/VCR y DVD. Podr?? ver el modo (TV/VCR o DVD) en el indicador del panel delantero.

46.Toma de entrada ANT.

Con??ctela a una antena, sistema de televisi??n por cable o sistema de sat??lite.

47.Cable de alimentaci??n

Con??ctelo a una toma de CA convencional (120 V/60 Hz).

NOTA: Retire el cable de alimentaci??n del gancho para evitar romperlo antes de conectarlo a una toma de CA convencional.

48.Toma de salida de audio digital COAXIAL

Con??ctela a la entrada digital de un amplificador o decodificador externo.

49.Toma de salida AUDIO L/R

Con??ctela a la entrada de audio anal??gico de un amplificador o decodificador externo.

NOTA: Las tomas de entrada de audio (roha y blanca) en el lado trasero sirven para pro- ducir no el son televisor ni el son de entrada externa, sino el son DVD.

PREPARACI??N PARA LA

UTILIZACI??N

CONEXIONES DE ANTENA/

TELEVISI??N POR CABLE

Consulte la figura 4 de la p??gina 11

ANTENAS SEPARADAS DE VHF/UHF

En algunas ??reas ser?? necesario utilizar una antena exterior.

Consulte la figura 4 de la p??gina 11

fuente a las tomas AUDIO L/R y VIDEO de este tele- visor/DVD/VHS. Y luego pulse el bot??n SELECT hasta que "VIDEO" aparezca en la pantalla.

NOTA:

???Cuando conecte una videograbadora monoaural (otra fuente) a este televisor/DVD/VHS, conecte la toma de salida de audio de la videograbadora monoaural (otra fuente) a la toma AUDIO L de este televisor/DVD/VHS. El audio saldr?? igualmente en los canales L y R.

Consulte la figura 5 de la p??gina 12

Conexiones de antena/televisi??n por cable Contin??a en la p??gina siguiente.

TELEVISI??N POR CABLE SIN CAJA DE

CONVERTIDOR/DECODIFICADOR

Utilice esta conexi??n si su sistema de televisi??n por cable se conecta directamente a su televisor/DVD/VHS sin necesidad de caja de conver- tidor.

Consulte la figura 4 de la p??gina 11

TELEVISI??N POR CABLE CON CAJA

DE CONVERTIDOR/DECODIFICADOR

O CAJA DE SAT??LITE

Si su proveedor de servicios de televisi??n por cable le suministra una caja de convertidor o si usted utiliza un sistema de sat??lite, podr?? utilizar la conexi??n b??si- ca mostrada aqu??.

Consulte la figura 4 de la p??gina 11

INSTALACI??N DE LAS PILAS

1)Abra la tapa del compartimiento de las pilas del mando a distancia presion??ndola en el sentido de la flecha.

2)Inserte 2 pilas tama??o "AA" en su compartimiento colocando las polaridades (+/-) en sus posiciones correspondientes.

3)Vuelva a poner la tapa.

CONEXI??N A TOMAS DE

ENTRADA EXTERNA

Cuando vea un programa grabado en otra fuente (videograbadora o videoc??mara), utilice las tomas de entrada de audio/v??deo de la parte delantera del tele- visor/DVD/VHS.

Conecte las tomas de salida de audio/v??deo de otra

MODO DE ENTRADA EXTERNA

Cuando utilice una se??al de entrada externa (otra videograbadora o una videoc??mara), conecte los cables de salida de audio/v??deo del equipo de repro- ducci??n a las tomas AUDIO IN/VIDEO IN de su televisor/videograbadora. Y luego pulse el bot??n CHANNEL K o L hasta que ???AUX??? aparezca en la pantalla.

Usted puede programar el temporizador para que explore todos los canales que puedan recibirse en su zona.

CONEXI??N A UN SISTEMA

EST??REO (Para DVD)

Consulte la figura 6 de la p??gina 13

NOTAS:

???Aseg??rese de desconectar la alimentaci??n a todos los componentes del sistema antes de hacer la conexi??n a otro componente.

???Consulte el manual del propietario de su sistema est??reo y de cualquier otro componente que vaya a conectar al televisor/DVD/VHS.

???Las tomas de entrada de audio (roha y blanca) en el lado trasero sirven para producir no el son televisor ni el son de entrada externa, sino el son DVD.

CONEXI??N A UN

AMPLIFICADOR EQUIPADO

CON TOMAS DE ENTRADA

DIGITAL PARA, POR EJEMPLO,

PLATINA MD O PLATINA DAT

(Para DVD)

Utilice un cable digital coaxial (de venta en el comer- cio) para las conexiones de audio.

Consulte la figura 7 de la p??gina 13

NOTAS:

???La fuente de audio de un disco del formato de sonido ambiental Dolby Digital de 5,1 canales no puede ser grabada como sonido digital por una platina MD o DAT.

???Aseg??rese de desconectar la alimentaci??n de todos los componentes del sistema antes de hacer la conexi??n a otro componente.

???Consulte los manuales del propietario de los com- ponentes que vaya a conectar al televisor/DVD/VHS.

???Ponga DOLBY DIGITAL y DTS en OFF para la salida de audio en el modo de preparaci??n. La reproducci??n en el televisor/DVD/VHS utilizando los ajustes incorrectos puede generar distorsi??n de ruido, y tambi??n puede estropear los altavoces.

???El audio se silenciar?? cuando DOLBY DIGITAL se ponga en OFF y VIRTUAL 3D se ponga en ON para la salida de audio en el modo de preparaci??n y usted seleccione la fuente de audio del formato de sonido ambiental Dolby Digital de 5,1 canales.

CONEXI??N A UN

DECODIFICADOR DOLBY

DIGITAL, DECODIFICADOR

DTS O DECODIFICADOR

MPEG (Para DVD)

Si se utiliza este televisor/DVD/VHS para reproducir fuentes del formato de sonido ambiental Dolby Digital de 5,1 canales o de sonido ambiental DTS, el televisor/DVD/VHS dar?? salida a un flujo de datos Dolby Digital o DTS desde su toma de salida de audio digital COAXIAL. Conectando el reproductor a un decodificador Dolby Digital o DTS, usted podr?? disfrutar de un ambiente m??s convincente y real con un sonido ambiental potente y de alta calidad de tipo profesional tal como el que se oye en salas de cine. Utilice cables digitales coaxiales (de venta en el com- ercio) para las conexiones de audio.

???A menos que se haga la conexi??n a un decodifi- cador Dolby Digital o DTS, ponga DOLBY DIGI- TAL y DTS en OFF para la salida de audio en el modo de preparaci??n. La reproducci??n en el televi- sor/DVD/VHS utilizando los ajustes incorrectos puede generar distorsi??n de ruido, y tambi??n puede estropear los altavoces.

???El audio se silenciar?? cuando DOLBY DIGITAL se ponga en OFF y VIRTUAL 3D se ponga en ON para la salida de audio en el modo de preparaci??n y usted seleccione la fuente de audio del formato de sonido ambiental Dolby Digital de 5,1 canales.

Fabricado bajo licencia de Dolby Laboratories. ???Dolby??? y el s??mbolo de la D doble son marcas de f??brica de Dolby Laboratories. Trabajos confidenciales sin publicar.

???DTS??? y ???DTS Digital Out??? son marcas de f??brica de Digital Theater Systems, Inc.

???

???

???

???

Aseg??rese de desconectar la alimentaci??n de todos los componentes del sistema antes de hacer la conexi??n a otro componente.

Consulte los manuales del propietario de los com- ponentes que vaya a conectar al televisor/DVD/VHS.

Si conecta un decodificador Dolby Digital, ponga DOLBY DIGITAL en ON para la salida de audio en el modo de preparaci??n.

Si conecta un decodificador DTS, ponga DTS en ON para la salida de audio en el modo de preparaci??n.

TV SECTION

PREPARACI??N PARA LA

UTILIZACI??N

PREPARACI??N DE CANALES

POR PRIMERA VEZ

1

Conecte el cable de alimentaci??n a una toma de CA convencional.

NOTA: Si aparecen algunos d??gitos en la esquina de la pantalla, pulse el bot??n POWER sin des- enchufar el cable de alimentaci??n.

2

Pulse el bot??n POWER para encender el televisor/DVD/VHS.

3

Seleccione "ESPA??OL" o "ENGLISH" (ingl??s), "FRAN??AIS" (franc??s) utilizando el bot??n de flecha

B o s.

4

Pulse el bot??n flecha K o L para se??alar ???AUTOP-

RESELECCION???.

Luego pulse el bot??n flecha B. El sintonizador explorar?? y memorizar?? todos los canales activos de su ??rea.

NOTAS:

???El televisor/videograbadora distingue entre los canales de televisi??n est??ndar y los canales de tele- visor por cable.

???Si desea reproducir o grabar una cinta ANTES de preajustar el sintonizador, usted tendr?? que pulsar el bot??n SETUP en el mando a distancia. Para preajustar de nuevo el sintonizador, consulte

???REPETICI??N DE LA PREPARACI??N DE CANALES???.

???La unidad de televisor/videograbadora puede reconocer los canales de TV como ellos de TV por cable a causa de los condiciones de recepci??n. En este caso, pruebe el preajuste autom??tico de nuevo en los condiciones finas de recepci??n.

5

El sintonizador se para en el canal memorizado m??s bajo. Si desea recuperar canales seleccionados, usted podr?? seleccionar directamente el canal deseado con los botones numerados del mando a distancia o con los botones CHANNEL K o L.

AJUSTE DEL RELOJ

Cerci??rese...

??? La alimentaci??n del televisor/videograbadora deber?? estar conectada.

En el ejemplo de abajo, el reloj va a ajustarse as??:

FECHA: 1 de mayo de 2001

HORA: 5:40 PM

1

Pulse el bot??n SETUP en el mando a distancia. Pulse el bot??n PLAY/K o STOP/L para indicar ???AJUSTE RELOJ???. Luego, pulse el bot??n F.FWD/B.

2

Pulse el bot??n PLAY/K o STOP/L para indicar ???AJUSTE MANUAL RELOJ???. Luego, pulse el bot??n F.FWD/B.

3

Pulse el bot??n PLAY/K o STOP/L hasta que aparez- ca el mes deseado. (Ejemplo: Mayo - 05) Luego, pulse el bot??n F.FWD/B.

4

Pulse el bot??n PLAY/K o STOP/L hasta que aparez- ca el d??a del mes deseado. (Ejemplo: 1 - 01) Luego, pulse el bot??n F.FWD/B.

5

Pulse el bot??n PLAY/K o STOP/L hasta que aparez- ca el a??o deseado. (Ejemplo: 2001) Luego, pulse el bot??n F.FWD/B.

6

Pulse el bot??n PLAY/K o STOP/L hasta que aparez- ca la hora deseada. (Ejemplo: 5, PM) Luego, pulse el bot??n F.FWD/B.

7

Pulse el bot??n PLAY/K o STOP/L hasta que aparez- ca el minuto deseado. (Ejemplo: 40)

8

Pulse el bot??n SRTUP en el mando a distancia. Aunque los segundos no se visualizan, ??stos empiezan a contar desde 00 cuando se pulsa SETUP en el mando a distancia. Utilice esta funci??n para sin- cronizar el reloj con la hora correcta.