DIGITAL HOME
CINEMA SYSTEM
THIS APPLIANCE IS MANUFACTURED BY:
Instruction Manual
COMPACT
DIGITAL VIDEO
Safety Warnings
PREPARATION
This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit.
This symbol alerts you to important operating and maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1 LASER product.
???This apparatus shall always be connected to a AC outlet with a protective grounding connection.
???To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
Wiring the Main Power Supply Plug(UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suit- able safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:???
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:???
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
During thunderstorms, disconnect AC main plug from the wall outlet.
Voltage peaks due to lightning could damage the unit.
Protect the player from moisture(i.e. vases) , and excess heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only.
Condensation may occur if your player or disc has been stored in cold temperatures.
If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
Features
The
Dolby Pro Logic II
Dolby Pro Logic II is a new form of
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater
Systems Inc. It delivers
TV Screen Saver Function
The
The
Power Saving Function
The
Customized TV Screen Display
The
DVD or VCD playback and set it as your background wallpaper.
Contents
PREPARATION
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
CONNECTIONS
Connecting the Speakers . . . . . . . . . . . . . . . . . . . .11 Connecting the Video Out to TV . . . . . . . . . . . . . . .13 P.SCAN(Progressive Scan) Function . . . . . . . . . . . .14 Connecting External Components . . . . . . . . . . . . . .15 Connecting the FM Antenna . . . . . . . . . . . . . . . . . .16
OPERATION
Before Using Your Home Theater . . . . . . . . . . . . . .17 Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
SETUP
Setting the Language . . . . . . . . . . . . . . . . . . . . . . .35 Setting TV Screen type . . . . . . . . . . . . . . . . . . . . . .37 Setting Parental Controls (Rating Level) . . . . . . . . .39 Setting the Password . . . . . . . . . . . . . . . . . . . . . . .40 Setting the Wallpaper . . . . . . . . . . . . . . . . . . . . . . .41 DivX (R) registration . . . . . . . . . . . . . . . . . . . . . . . .43 Setting the Speaker Mode . . . . . . . . . . . . . . . . . . .44 Setting the Delay Time . . . . . . . . . . . . . . . . . . . . . .45 Setting the Test Tone . . . . . . . . . . . . . . . . . . . . . . .47 Setting the DRC (Dynamic Range Compression) . .48 Setting the Audio . . . . . . . . . . . . . . . . . . . . . . . . . .49 AV SYNC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Sound Field (DSP)/EQ Function . . . . . . . . . . . . . . .52 Dolby Pro Logic II Mode . . . . . . . . . . . . . . . . . . . . .53 Dolby Pro Logic II Effect . . . . . . . . . . . . . . . . . . . . .54
RADIO OPERATION
Listening to Radio . . . . . . . . . . . . . . . . . . . . . . . . . .55 Presetting Stations . . . . . . . . . . . . . . . . . . . . . . . . .56
MISCELLANEOUS
Convenient Functions . . . . . . . . . . . . . . . . . . . . . . .57 Before Calling for Service . . . . . . . . . . . . . . . . . . . .59 Cautions on Handling and Storing Discs . . . . . . . . .61 Language Code List . . . . . . . . . . . . . . . . . . . . . . . .62 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
GB
PREPARATION
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Do not use the following types of disc!
???LD,
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
???DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
???Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
???This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
GB
???Only
???MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
???Use discs recorded with a compression/decompression data rate greater than 128Kbps.
???Only files with the ".mp3" and ".MP3" extensions can be played.
???Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment.
???If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
???For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
???A maximum of 500 tracks can be played per CD.
???A maximum of 300 folders can be played per CD.
???Only files with the ".jpeg" and ".JPEG" extensions can be played.
???If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
???Only
???JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
???Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment.
???A maximum of 9,999 images can be stored on a single CD.
???When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
???Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
???Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user might not be played.
???Software update for unsupported formats is not supported. (Example: QPEL, GMC, resolution higher than 720 x 480 pixels, etc.)
???Sections with high frame rate might not be played while playing a DivX file.
???For more information about the formats authorized by DivX Networks, Inc., visit "www.divxnetworks.net".
Description
GB
Disc Tray
Open/Close ( ) button Play/Pause ( ) button
Function button
Video Output Connector
Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector.
FM Antenna Connector
COMPONENT VIDEO OUTPUT jacks
Connect a TV with component video inputs to these jacks.
PREPARATION
Standby indicator
Power ( ) button
Disc type indicators
Tuning Up & Skip ( ) buttons
Tuning Down & Skip ( ) buttons
System Status Display
Accessories
Description
DVD button TUNER button
AUX button
POWER button
Number(0~9) buttons
REMAIN button
STEP button
SEARCH buttons
VOLUME buttons
MENU button
INFO button
PL II EFFECT button
PL II MODE button
TUNER MEMORY, P.SCAN button
ZOOM button
SLOW, MO/ST button
9
DIMMER button
OPEN/CLOSE button
SLEEP button
CANCEL button
REPEAT button
Tuning Preset/CD Skip button
TUNING buttons
MUTE button
RETURN button
Cursor/Enter button
AUDIO button
SUB TITLE button
DSP/EQ button
TEST TONE button
SOUND EDIT button
LOGO button
DIGEST button
EZ VIEW, NT/PAL button
GB
??? Use the correct type of batteries.Batteries that look similar may differ in voltage.
??? Always replace both batteries at the same time.
??? Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30?? from the remote control sensor.
10
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
GB
Center Speaker
Front Speaker (R)
Front Speaker (L)
CONNECTIONS
Front Speakers L R
Subwoofer
Back of the Main Unit
Connect the correcting jacks to the back of the DVD player.
??? Mack sure the colors of the speaker terminals match the colors of the connect- ing jacks.
???Place these speakers in front of your listening position, facing inwards (about 45??) toward you.
???Place the speakers so that their tweeters will be at the same height as your ear.
???Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.
Center Speaker C
???It is best to install it at the same height as the front speakers.
???You can also install it directly over or under the TV.
Rear Speakers SL SR
???Place these speakers behind your listening position.
???If there isn't enough room, place these speakers so they face each other.
???Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.
*Unlike the front and center speakers, the rear speakers are used to handle mainly sound effects and sound will not come from them all the time.
Subwoofer SW
???The position of the subwoofer is not so critical. Place it anywhere you like.
Caution
Connecting the Video Out to TV
Choose one of the two methods for connecting to a TV.
METHOD 1 Composite Video ............... Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television.
METHOD 2 Component (Progressive Scan) Video ............... Best Quality
If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.
1 Press STOP button.
??? If playing a disc, press the STOP button twice so that ???STOP???, appears on the display.
2 Press and hold P.SCAN button on the remote control for over 5 seconds.
Connecting External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR.
(not supplied)
If the external analog compo- nent has only one Audio Out, connect either left or right.
1 Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog component.
??? Be sure to match connector colors.
2 Press AUX button on the remote control to select ???AUX??? input.
??? You can also use the FUNCTION button on the main unit. The mode switches as follows: FM ??? DVD/CD ??? AUX
Connecting the FM Antenna
FM Antenna (supplied)
1 Connect the FM antenna supplied to the FM 75??? COAXIAL terminal.
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
GB
CONNECTIONS
Before Using Your Home Theater
Disc terminology
Titles and chapters
???
These numbers are called "title numbers" and "chapter numbers".
Tracks (Video and music CDs)
???Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
Files (DivX)
???DivX is divided into sections called "files".
Numbers are allotted to these sections. These numbers are called "file numbers".
??? Depending on the content of the disc, the initial screen may appear different.
???Depending on the content of the disc, the initial screen may appear different.
3 Press OPEN/ CLOSE button to close the disc tray.
???If pressed once, ???PRESS PLAY??? is displayed and the stop position will be
stored in memory. If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
???If pressed twice, ???STOP??? is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
??? To resume playback, press PLAY/PAUSE ( ) button again.
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
???By default, the video format is set to "PAL".
???"NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
???Each country has a different video format standard.
???For normal playback, the video format of the disc must be the same as the video format of your TV.
Data CDs
???The appearance of the menu depends on the MP3/WMA disc.
???
ENTER button.
??? To select another album and track, repeat Steps 2 and 3 above.
Press INFO button.
??? Each time the button is pressed, the display changes as follows:
LOGIC.
To play a file icon in the screen,
Press the button when it is in stop status and select a desired icon from the top part of the menu.
???To play music files only, select the Icon.
???To view image files only, select the Icon.
???To view movie files only, select the Icon.
???To select all files select the Icon.
???Music File Icon
???Image File Icon
???Movie File Icon
???All File Icon
Screen Display
SUBTITLE display
JPEG File Playback JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Theater.
Digest Function
You can view 9 JPEG images on the TV screen.
Press DIGEST button during 1 playback.
??? JPEG files will be shown in 9 windows.
2 Press Cursor , , , buttons to select the desired image and then press ENTER button.
???The selected image is played for 5 seconds before moving to the next image.
To view the previous or next image with 9 windows, press .
Rotate/Flip Function
Press Cursor , , , buttons during playback.
button: Flip Vertically
Original Image
button: Flip Horizontally
Note ??? The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
GB
OPERATION
DivX Playback
The functions on this page apply to DIVX disc playback.
Skip Forward/Back
During playback, press the button.
???Goes to the next file whenever you press button, if there are over 2 files in the disk.
???Goes to the previous file whenever you press button, if there are over 2 files in the disk.
Fast playback
To play back the disc at a faster speed, press or during playback.
??? Each time you press either button, the playback speed will change as follows:
2x ??? 4x ??? 8x ??? 32x ??? Normal.
5 Minute Skip function
During playback, press the , button.
???Playback skips 5 minutes forward whenever you press button.
???Playback skips 5 minutes back whenever you press button.
Subtitle Display
Press the SUBTITLE button.
???Each time you press the button, your selection will toggle between ???SUBTITLE (1/1, 1/2 ...)??? and ???SUBTITLE OFF???.
???If the disc has only one subtitle file, it will be played automatically.
???See number 2 (Caption Function) below for more details concerning Subtitle usage with DIVX discs.
Audio Display
Press the AUDIO button.
DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near
1.Supported Formats
???This product only supports the following media formats.If both video and audio formats are not support- ed, the user may experience problems such as broken images or no sound.
??? Supported Video Formats
??? Supported Audio Formats
GB
OPERATION
Zoom Function
1 Press ZOOM
button.
???Each time you press the button, your selection will toggle between ???ZOOM X2??? and ???ZOOM OFF???.
Press Cursor ,, 2 , buttons to move
to the area you want to enlarge.
???DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.
???Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to 720*480 pixels (16:9). TV screen resolutions higher than 800 will not be supported.
???When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experi- ence shaking on the screen during playback.
2.Caption Function
???You must have some experience with video extraction and editing in order to use this feature properly.
???To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder.
Samsung_007CD1.smi
???Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
24
Checking the Remaining Time
Fast/Slow Playback
GB
Press the REMAIN button.
??? For checking the total and remaining time of a title or chapter being played.
Each time the REMAIN button is pressed
Fast Playback
DVD VCD CD MP3
Press .
???Each time the button is pressed during playback, the playback speed changes as follows:
Slow Playback
Press SLOW button.
???Each time the button is pressed during playback, the playback speed changes as follows:
heard only at 2x speed, and not at 4x, 8x, and 32x speeds.
???No sound is heard during slow playback and step motion playback.
???Reverse slow playback does not work with VCD and DivX.
OPERATION
MP3
TRACK REMAIN
Skipping Scenes/Songs
Press .
???Each time the button is pressed during playback, the previous or next chapter, track, or directory (file) will be played.
???You cannot skip chapters consecutively.
TRACK ELAPSED
25
DVD
TITLE 01/05 CHAPTER 002/040
TITLE 01/05 CHAPTER 004/040
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD VCD CD MP3 JPEG
Press REPEAT button.
??? Each time the button is pressed during playback, the repeat playback mode changes as follows:
You can repeatedly play back a designated section of a DVD.
??? For a VCD, press INFO button once.
of the desired segment.
???When ENTER button is pressed, the selected position will be stored in memory.
A -
A
REPEAT : A???
Press ENTER 4 button at the end
of the desired segment.
???The specified segment will be played repeatedly.
A - B
REPEAT :
OPERATION
To Select a Repeat Playback Mode in the Disc Information Screen
To return to normal playback, press Cursor ,
???Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on. To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the disc menu. (See page 34.)
1
2
3
4
Press INFO button twice.
Press Cursor button to move to REPEAT PLAYBACK ( ) display.
Press Cursor button to select the desired Repeat Playback mode.
Press ENTER button.
DVD
VCD CD
buttons to select OFF.
??? The
27
*For MP3 and JPEG discs, you cannot select Repeat Play from the information display screen.
28
Step Function DVD VCD
Press STEP button.
???The picture moves forward one frame each time the button is pressed during playback.
move to the area you want to enlarge.
3 Press ENTER
button.
???Each time the button is pressed, the zoom level changes as follows:
Angle Function DVD
This function allows you to view the same scene in different angles.
3 Press Cursor , or numeric buttons to select the desired angle.
??? Each time the button is pressed, the angle changes as follows:
1/3
2/3
3/3
Note ??? The Angle function works only with discs on which multiple angles have been recorded.
SELECT ZOOM POSITION
Press EZ VIEW button.
???Each time the button is pressed, the zoom function will switch between On and Off.
???When a movie is played in Widescreen format, black bars at the top and bottom of the TV screen can be removed by pressing the EZ VIEW button.
??? This function will not work if the DVD is recorded with
??? Black bars may not disappear because some DVD discs have a
29
??? This feature is not supported for DivX discs.
30
GB
Audio Language Selection Function DVD
Subtitle Language Selection Function DVD
1Press INFO button twice.
Press Cursor , 2 buttons or numeric
buttons to select the desired audio language.
???Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed.
SP 2/3
FR 3/3
display.
Press Cursor 3button or numeric
buttons to select the desired subtitle.
EN 1/3 EN 01/ 03OFF
SP 02/ 03
FR 03/ 03
OFF / 03
OPERATION
???To operate this function, you can also press the Select AUDIO or Select SUBTITLE buttons on the remote control.
???Depending on the disc, the Subtitle and Audio Language functions may not be available.
Moving Directly to a Scene/Song
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD VCD CD
1Press INFO button.
Moving to a Title/Track
Moving to a Chapter
Press Cursor , 3 buttons to move to
Chapter ( ) display.
1 In Stop mode, press MENU button.
???When playing a VCD (version 2.), this toggles between PBC ON and OFF.
Moving to a Chapter
Press Cursor , but- 4 tons or numeric buttons to select the desired chapter
and then press ENTER but- ton.
Moving to a Specific Time
Press Cursor , 5 buttons to move to
time display.
Moving to a Specific Time
Press the numeric 6 buttons to select the
desired time and then press ENTER button.
Using the Title Menu DVD
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary.
MP3 JPEG
Press the numeric buttons.
???The selected file will be played.
???When playing an MP3 or JPEG disc, you cannot use , to move to a folder. To move a folder, press (Stop) and then press , .
???You can press on the remote control to move directly to the desired title, chapter, or track.
???Depending on the disc, you may not be able to move to the selected title or time.
Press MENU button to exit the setup screen.
33
Setting the Language
GB
OSD
??? Once the setup is complete, the OSD will be English if English has been selected as language.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
SETUP
???To select another language, select OTHER and enter the language code of your country. (See page 62 for language codes)
AUDIO, SUB TITLE and DISC MENU language can be selected.
MOVE ENTER RETURN EXITMOVE ENTER RETURN EXITMOVE ENTER RETURN EXITMOVE ENTER RETURN EXIT
Setting TV Screen type
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.
GB
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
???For a standard TV, select either "4:3LB" or "4:3PS" option according to personal preference. Select "16:9" if you have a widescreen TV.
??? Once the setup is complete, you will be taken to the previous screen.
WIDE
4:3LB
(4:3 Letterbox)
4:3PS
(4:3 Pan&Scan)
: Select this to view a 16:9 picture in the
??? You can enjoy the widescreen aspect.
: Select this to play a 16:9 picture in the letter box mode on a conventional TV.
??? Black bars will appear at the top and bottom of the screen.
: Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
You can set the password for the Parental (rating level) setting.
Press Cursor
1 Press MENU button. 2 button to move to ???Setup??? and then
press ENTER button.
Press Cursor button
5 Enter the password and then press
Press Cursor 3 button to move to
???PARENTAL??? and then press ENTER button.
Press Cursor ,
4 button to select the desired rating level and then press ENTER button.
???If you have selected Level 6, you can- not view DVDs with Level 7 or higher.
???The higher the level, the closer the content is to violent or adult material.
Enter the password 5 and then press
ENTER button.
???The password is set to "7890" by default.
???Once the setup is complete, you will be taken to the previous screen.
ENTER button.
ENTER button.
???Enter the old password, a new password, and confirm new password.
???The setting is complete.
SETUP
Press RETURN button to return to the previous level.
If you have forgotten the rating level password, do the following:
???While the player is in the no disc mode, hold the main unit's button for longer than 5 seconds. ???INITIALIZE??? appears on the display and all settings will return to the default values.
???Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
40
Setting the Wallpaper JPEG DVD VCD
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
GB
Setting the Wallpaper
During playback, press
1PLAY/PAUSE button when an image you like appears.
PAUSE
2 Press LOGO
button.
??????COPY LOGO DATA??? will be dis- played on the TV screen.
COPY LOGO DATA
To select one of the 3 wallpaper settings you've made
3 The power will turn off and then back on.
???The selected wallpaper will be displayed.
???You can select up to 3 wallpaper settings.
Press to select 4 the desired ???USER???,
and then press
ENTER.
???This selects one of the 3 wallpa- per screens
5 Press MENU button to exit the setup screen.
SETUP
MOVE SELECT RETURN EXITMOVE SELECT RETURN EXIT
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
DivX (R) registration
Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod.
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.
Press Cursor 3 button to move to
???DIVX(R) registration??? and then press ENTER button.
In Stop mode, 1 press MENU
button.
In the Speaker 3 Setup, press the
ENTER button again.
Press Cursor 2 button to move to
???Audio??? and then press ENTER button.
MOVE ENTEREXIT
??? For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
??? Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 53).
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.
GB
Press Cursor button 3to move to ???DELAY
TIME??? and then press ENTER button.
ENTER button.
??? You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers.
??? With (Dolby Pro Logic II), the delay time may be different for each mode.
???With
???The Center channel is only adjustable on 5.1 channel discs.
45
???Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the dis- tance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
???Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
SETUP
Ideal CENTER SPEAK-
ER placement
Ideal SUR-
ROUND
SPEAKER placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
46
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
Setting the DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietist sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
GB
1 In Stop or no disc mode, press MENU button.
Press Cursor 2 button to move to
???Audio??? and then press ENTER
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote. Press TEST TONE button.
When playing a DVD or CD, this will work only in Stop mode.
Press Cursor 3 button to move to
???DRC??? and then press ENTER button.
4 Press Cursor , to adjust
the ???DRC???.
???When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller.
SETUP
??? Use this function to check that each speaker is correctly con- nected and that there is no problem.
To end the test tone,
press TEST TONE button again.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Setting the Audio
You can adjust the balance and level for each speaker.
Method 1 When adjusting the audio quality using the setup screen
MOVE ENTEREXITMOVE ENTEREXIT
GB
Method 2 When manually adjusting with the SOUND EDIT button
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
49
Adjusting Front/Rear Speaker Balance
???You can select between 00 and
???The volume decreases as you move closer to
Adjusting Center/Rear/Subwoofer Speaker Level
??? The volume level can be adjusted in steps from +6dB to
??? The sound gets louder as you move closer to +6dB and quieter as you get closer to
50
AV SYNC Setup
Video may look slower than the audio if it is connected to a digital TV.
If this occurs, adjust the audio delay time to to match the video.
Press Cursor , buttons 1 Press the MENU button. 2 to move to ???Audio??? and then
press ENTER button.
??? Setup menu appears.
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments. EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
Press DSP/EQ button.
??? "DSP" appears on the display panel.
??? Each time the button is pressed, the selection changes as follows:
3Press Cursor , buttons to move to
Press Cursor buttons 4 to select the
Time and then press the ENTER button.
???You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
51
???This feature works with CDs,
???When playing a DVD disc encoded with two or more channels,
POP, JAZZ, ROCK: Depending on the genre of music, you can select POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
PASS: Select this for normal listening.
52
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
This function works only in Dolby Pro Logic MUSIC mode.
Press PL II MODE button.
??? Each time the button is pressed, the mode changes as follows.
Press PL II EFFECT button 2 to select Panorama, then press Cursor , buttons to select
the desired effect setting.
???You can select either 0 or 1.
???This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.
Press PL II EFFECT button 3 to select
Cursor , buttons to select the desired effect setting.
???You can select between 0 and 7.
???This sets the width of the center image.
The higher the setting, the less sound comes from the center speaker.
Press PL II EFFECT button 4to select Dimension, then press
the Cursor , buttons to select the desired setting.
???You can select between 0 and 6.
???Incrementally adjusts the sound field (DSP)from the front or rear.
SETUP
PRO LOGIC II
???MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
???CINEMA: Adds realism to the movie soundtrack.
???PRO LOGIC: You will experience a realistic
and right speakers.
??? MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sound from the front left and right speakers and the subwoofer only.
Listening to Radio
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1Press the TUNER button and select the FM band.
Main Unit
2 Tune in to the desired station.
increase or decrease the frequency incrementally.
1Press the TUNER button and select the FM band.
1Press the FUNC- TION button to select the FM band.
2 Select a broadcast station.
and then press and hold button to automatically search the band.
Manual Tuning Press STOP ( ) to select MANUAL and then briefly
press to tune in to a lower or higher frequency.
???You can select between 1 and 15 presels.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
To tune in to a preset station, press on the remote control to select a channel.
Convenient Functions
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Press SLEEP button.
???"SLEEP" will be displayed. Each time the button is pressed, the preset time changes as follows: 10 ??? 20 ??? 30 ??? 60 ??? 90 ??? 120 ??? 150 ??? OFF.
To confirm the sleep timer setting, press SLEEP button.
???The remaining time before the Home Theater will shut itself off is displayed.
???Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press SLEEP button until OFF appears on the display.
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
??????MUTE ON??? appears in the display.
???To restore the sound, press the button again to select ???MUTE OFF???.
GB
MISCELLANEOUS
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
GB
MISCELLANEOUS
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Caution ??? Do not allow the discs to become contaminated with dirt.
??? Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.
??? When cleaning, wipe gently from the inside to the outside of the disc.
???Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player,
???the player may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.
Language Code List
Enter the appropriate code number for the initial settings ???Disc Audio???, ???Disc Subtitle??? and/or ???Disc Menu??? (See page 35).
GB
MISCELLANEOUS
Specifications
63
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.