SyncMaster 2233RZ
LCD Monitor
User Manual
SyncMaster 2233RZ
LCD Monitor
User Manual
Safety Instructions
Notational
Note
These safety instructions must be followed to ensure your safety and prevent property dam- age.
Make sure to read the instructions carefully and use the product in the correct manner.
Warning / Caution
Otherwise, it may result in death or personal injury.
Otherwise, it may result in personal injury or property damage.
Notational Conventions
Prohibited
Do not disassemble
Do not touch
Important to read and under- stand at all times
Disconnect the plug from the outlet
Ground to prevent an electric shock
Power
When not used for extended period of time, set your computer to DPM.
If using screen saver, set it to active screen mode.
The images here are for reference only, and are not applicable in all cases (or countries).
Shortcut to
Do not use a damaged power cord or plug or a damaged or loose power outlet.
???Otherwise, this may result in electric shock or fire.
Do not touch the power plug with wet hands when removing or plugging the plug into the outlet.
???Otherwise, this may result in electric shock.
Make sure to connect the power cord to a grounded power out- let.
???Otherwise, it may result in electric shock or personal injury.
Safety Instructions
Ensure that the power plug is plugged into the power outlet firmly and correctly.
???Otherwise, this may result in fire.
Do not forcefully bend or pull the power plug and do not place any heavy material on it.
???Otherwise, this may result in fire.
Do not connect multiple appliances to the same power outlet.
???Otherwise, this may cause fire due to overheating.
Do not disconnect the power cord while using the product.
???Otherwise, this may result in damage to the product due to electric shock.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
???This may cause electric shock or fire.
Use only the power cord provided by our company. Do not use the provided power cord of another product.
???Otherwise, this may result in fire or electric shock.
Installation
Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high hu- midity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc.
Failure to do so may cause serious damage to your monitor.
Do not drop the monitor when moving it.
???This may cause damage to the product or the person carrying it.
Ensure that at least two persons lift and move the product.
???Otherwise, it may be dropped and cause personal injury, and/ or damage the product.
When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out.
???Otherwise, it may fall or cause personal injury.
???Use a cabinet or rack of a size appropriate to the product.
Safety Instructions
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIG-
ARETTES AND ANY HEATING APPLIANCES NEAR THE
PRODUCT.
???Otherwise, this may result in fire.
Keep heating appliances as far away from the power cord or the product as possible.
???Otherwise, this may result in electric shock or fire.
Do not install it in a badly ventilated location such as a bookcase or closet.
???Otherwise, this may result in fire due to an increase in the in- ternal temperature.
Put down the monitor carefully.
???Failing to do so may damage the monitor.
Do not place the front of the product on the floor.
???Otherwise, this may result in damage to the screen display.
Ensure that an authorized installation company installs the wall mount.
???Otherwise, it may fall and cause personal injury.
???Make sure to install the specified wall mount.
Install your product in a well ventilated location. Ensure that there is a clearance of more than 10 cm from the wall.
???Otherwise, it may result in fire due to an increase in the internal temperature.
Ensure that the packaging vinyl is kept away from children.
???Otherwise, it may result in serious harm (suffocation) if children play with it.
If the height of your monitor is adjustable, do not place any ob- ject or part of your body on the stand when lowering it.
???This may cause damage to the product or the person carrying it.
Clean
When cleaning the monitor case or the surface of the
Do not spray cleaner directly onto the surface of the product.
???Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off.
Safety Instructions
Clean the product using a soft cloth with a monitor cleaner only. If you must use a cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10.
When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth.
???Otherwise, it may result in fire.
When cleaning the product, make sure to disconnect the power cord.
???Otherwise, it may result in electric shock or fire.
When cleaning the product, disconnect the power cord and clean it softly with a dry cloth.
???(Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito repellant, lubricant, or cleaner.) These may change the appearance of the product surface and peel off the indica- tion labels on the product.
Since the product housing is easily scratched, make sure to use the specified cloth only.
???Use the specified cloth adding only a little water. As the product may be scratched if there is any foreign material on the cloth, make sure to shake it thoroughly before using it.
When cleaning the product, do not spray water directly onto the main body of the product.
???Ensure that water does not enter the product and that it is not wet.
???Otherwise, this may result in electric shock, fire or a malfunc- tion.
Others
The product is a high voltage product. Ensure that users do not disassemble, repair or modify the product themselves.
???Otherwise, this may result in electric shock or fire. If the product needs to be repaired, contact a Service Center.
If there is a strange smell or a strange sound or smoke is coming from the product, disconnect the power plug immediately and con- tact a Service Center.
???Otherwise, this may result in electric shock or fire.
Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car.
???Otherwise, this may result in electric shock or fire.
Safety Instructions
When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center.
???Otherwise, this may result in electric shock or fire.
If thunder or lightening is occurring, do not touch the power cord or antenna cable.
???Otherwise, this may result in electric shock or fire.
Do not try to move the monitor by pulling only the wire or the signal cable.
???Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.
Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables.
???Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.
Make sure that the ventilating opening is not blocked by a table or curtain.
???Otherwise, it may result in fire due to an increase in the internal temperature.
Do not place any containers containing water, vases, flower- pots, medicines as well as any metal on the product.
???If water or a foreign material enters the product, disconnect the power cord and contact a Service Center.
???This may result in a product malfunction, electric shock, or fire.
Do not use or keep combustible spray or flammable material near the product.
???Otherwise, this may result in an explosion or fire.
Do not insert any metal, such as chopsticks, coins, pins and steel, or flammable objects, such as matches or paper, inside the product (through the ventilating openings, input and output termi- nals, etc).
???If water or foreign material enters the product, disconnect the power cord and contact a Service Center.
???Otherwise, this may result in electric shock or fire.
When using a fixed screen for a long time, an afterimage or stain may occur.
???If you are not using your product for a long period of time, put it into sleep mode or use a moving screen saver.
Set a resolution and frequency appropriate to the product.
???Otherwise, your eyesight may be damaged.
Safety Instructions
If you continually move closer to the product screen, your eye- sight may be failing.
To ease eye strain, take at least a
Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations.
???Otherwise, it may fall and cause personal injury and/or damage the product.
???If you use the product in a location exposed to vibrations, it may damage the product and result in fire.
When moving the product, turn the power off and disconnect the power plug, antenna cable, and all the cables connected to the product.
???Otherwise, it may result in electric shock or fire.
Ensure that children do not hang onto the product or climb up onto the product.
???The product may fall and cause personal injury or death.
If you do not use the product for a long period of time, disconnect the power cord from the power outlet.
???Otherwise, this may result in overheating or fire due to dust, and may result in fire due to electric shock or leakage.
Do not place any heavy items or toys or confectionery, such as cookies etc. that may attract the attention of children and to the product.
???Your children may hang onto the product causing it to fall and this may result in personal injury or death.
Do not turn the product upside down or move it while holding only the stand.
???Otherwise, it may fall and result in personal injury and/or dam- age to the product.
Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater.
???This may reduce the lifetime of the product, and may result in fire.
Do not drop any objects onto the product or cause any impact to the product.
???Otherwise, this may result in electric shock or fire.
Safety Instructions
Do not use a humidifier or kitchen table near the product.
???Otherwise, this may result in electric shock or fire.
When there is a gas leak, do not touch the product or the power plug but ventilate immediately.
???If a spark occurs, it may cause an explosion or fire.
If the product has been turned on for a long time, the display panel becomes hot. Do not touch it.
???Keep the small accessories in a location out of the reach of children.
Be careful when adjusting the angle of the product or the height of the stand.
???This may result in personal injury as your hand or fingers may become caught.
???Also, if you tilt the product too far, it may fall and cause personal injury.
Do not install the product in a location low enough for children to reach.
???Otherwise, it may fall and result in personal injury.
???Since the front part of the product is heavy, install the product on a level and stable surface.
Do not put any heavy objects on the product.
???This may result in personal injury and/or damage to the prod- uct.
Good Postures When Using the Monitor
When using the product, use it in the correct posi- tion.
???Keep your back straight while looking at the prod- uct.
???The distance between your eyes and the screen should be between 45 to 50 cm. Look at the screen from a slightly higher location than the height of the screen.
???When using the product, use it in the correct posi- tion.
???Adjust the angle so that light is not reflected on the screen.
???Place your arms perpendicular to your sides and allow your arms to be level with the back of the hand.
Safety Instructions
???Keep your elbow at 90 degrees.
???Keep your knees at greater than 90 degrees, and keep your heels firmly on the floor. Keep your arms lower than your heart.
Introduction
Package Contents
Note
To use the 3D feature, the program must be the 3D version and you must wear the 3D glasses provided by nVidia.
Since the graphics card (video card) must also support the 3D feature to enjoy 3D, make sure to check if your graphics card is compatible by asking nVidia.
Note
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking
Monitor
Manuals
(Not available in all loca- tions)
Cables
Introduction
Others
Note
Cleaning Cloth is only provided for highly polished black products as a product feature.
Your Monitor
Initial Settings
Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the Power button off and on. It will be displayed again.
It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reaching the maximum count.
Note
The resolution displayed on the screen is the optimal resolution for this product.
Adjust your PC resolution so that it is the same as the optimal resolution for this product.
Front
Introduction
MENU button [MENU/
]
Opens the
Brightness button [
]
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip
Contrast [
]
When OSD is not on the screen, push the button to adjust Contrast.
>> Click here to see an animation clip
Adjust buttons [
]
These buttons allow you to adjust items in the menu.
Enter button [
]
Activates a highlighted menu item.
Customized Key[
]
You can customize key assignment for the Custom button according to your preferences.
Note
You can configure the customized key for a required function via Setup >
Power button [
]
Use this button for turning the product on and off.
Power Indicator
This light is lit when operating normally, and blinks once when your ad- justments are saved.
Note
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.
Rear
Note
The configuration at the back of the product may vary from product to product.
Introduction
POWER port
Connect the power cord for your monitor to the POWER port on the back of the product.
DVI IN port
Connect the DVI Cable to the DVI IN port on the back of your monitor.
Note
DVI with HDCP : HDCP operates only in Sin- gle Link mode (60 Hz).
(It is not supported in Dual Link mode.)
Kensington Lock
Introduction
The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustra- tion depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately.
Note
The location of the Kensington Lock may be different depending on its model.
Using the
1.Insert the locking device into the Ken- sington slot on the Monitor (
) and turn it in the locking direction (
).
2.Connect the Kensington Lock cable.
3.Fix the Kensington Lock to a desk or a heavy stationary object.
Cable holding ring
Fix the cables using the holding ring, as shown in the figure.
Note
See Connecting Cables for further information regarding cable connections.
Connections
Connecting Cables
Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the DVI (Digital) connector on the video card.
???Connect the DVI Cable to the DVI IN Port on the back of your Monitor.
[DVI IN]
Connected to a Macintosh.
???Connect the monitor to the Macintosh computer using the DVI connection cable.
Note
If the monitor and the computer are connected, you can turn them on and use them.
Using the Stand
Folding the base
Connections
Note
You can tilt the monitor upwards at an angle of
Attaching a Base
This monitor accepts a 100 mm x 100 mm
Monitor
Mounting interface pad (Sold separately)
1.Turn off your monitor and unplug its power cord.
2.Lay the LCD monitor
3.Remove the stand from the LCD monitor.
4.Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the
???Do not use screws longer than the standard dimension, as they may dam- age the inside of the Monitor.
???For wall mounts that do not comply with VESA standard screw specifica- tions, the length of the screws may differ depending on their specifications.
???Do not use screws that do not comply with the VESA standard screw specifications.
Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
???Samsung is not liable for product damage or personal injury when a non- VESA or
???To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the wall surface.
Connections
???Contact the nearest Samsung Service Center for more information. Sam- sung Electronics will not be responsible for damages caused by using a base other than those specified.
???Please use Wall Mount according to the International standards.
Using the Software
Monitor Driver
Note
When prompted by the operating system for the monitor driver, insert the CD- ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the oper- ating system you have.
Prepare a blank disk and download the driver program file at the Internet web site shown here.
Internet web site :
http://www.samsung.com/ (Worldwide)
Installing the Monitor Driver (Automatic)
1.Insert CD into the
2.Click "Windows".
3.Choose your monitor model in the model list, then click the "OK" button.
4.If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button (Microsoft?? Windows?? XP/2000 Operating System).
Using the Software
Note
This monitor driver is under certifying MS logo, and this installation doesn't damage your system.
The certified driver will be posted on Samsung Monitor homepage.
Installing the Monitor Driver (Manual)
Microsoft?? Windows Vista?????? Operating System
1.Insert your Manual CD into your
2.Click 
(Start) and "Control Panel". Then,
3.Click "Personalization" and then "Display Settings".
4.Click "Advanced Settings...".
5.Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is.
Using the Software
If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".
Note
This monitor driver is under certifying MS logo, and this installation doesn't damage your system.
The certified driver will be posted on Samsung Monitor homepage.
6.Click "Update Driver..." in the "Driver" tab.
7.Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".
8.Click "Have Disk...??? and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK".
Using the Software
9.Select the model that matches your monitor from the list of monitor models on the screen, and click "Next".
10. Click "Close" ??? "Close" ??? "OK" ??? "OK" on the following screens displayed in sequence.
Microsoft?? Windows?? XP Operating System
Using the Software
1.Insert CD into the
2.Click "Start" ??? "Control Panel" then click the "Appearance and Themes" icon.
3.Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4.Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5.Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6.Select "Don't search, I will..." then click "Next" and then click "Have disk".
Using the Software
7.Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button.
8.If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
Note
This monitor driver is under certifying MS logo, and this installation doesn't damage your system.
The certified driver will be posted on Samsung Monitor homepage.
9.Click the "Close" button then click "OK" button continually.
Using the Software
10. Monitor driver installation is completed. Microsoft?? Windows?? 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1.Choose "OK" button on the "Insert disk" window.
2.Click the "Browse" button on the "File Needed" window.
3.Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install
1.Click "Start", "Setting", "Control Panel".
2.Double click the "Display" icon.
3.Select the "Settings" tab and click "Advanced Properties" button.
4.Choose "Monitor".
Case1 : If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation
Case2 : If the "Properties" button is active, click the "Properties" button then follow next steps continually.
5.Click "Driver" and then click on "Update Driver..." then click on the "Next" button.
6.Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next" and then click "Have disk".
7.Click the "Browse" button then choose A:(D:\Driver).
8.Click the "Open" button, then click "OK" button.
9.Choose your monitor model and click the "Next" button then click "Next" button.
10.Click the "Finish" button then the "Close" button.
If you can see the "Digital Signature Not Found" window then click the "Yes" button. And click the "Finish" button then the "Close" button.
Microsoft?? Windows?? Millennium Operating System
1.Click "Start", "Setting", "Control Panel".
2.Double click the "Display" icon.
3.Select the "Settings" tab and click "Advanced Properties" button.
Using the Software
4.Select the "Monitor" tab.
5.Click the "Change" button in the "Monitor Type" area.
6.Choose "Specify the location of the driver".
7.Choose "Display a list of all the driver in a specific location..." then click "Next" button.
8.Click the "Have Disk" button.
9.Specify A:\(D:\driver) then click "OK" button.
10.Select "Show all devices" and choose the monitor that corresponds to the one you con- nected to your computer and click "OK".
11.Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box.
Microsoft?? Windows?? NT Operating System
1.Click "Start", "Settings", "Control Panel", and then
2.In Display Registration Information window, click Settings Tab and then click "All Display
Modes".
3.Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click "OK".
4.Click "Apply" button if you see the screen working normally after clicking "Test". If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency).
Note
If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute
1.Press "Enter" at the first and the second screen after executing the X86Config file.
2.The third screen is for setting your mouse.
3.Set a mouse for your computer.
4.The next screen is for selecting a keyboard.
5.Set a Keyboard for your computer.
6.The next screen is for setting your monitor.
7.First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.)
8.Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9.Enter the model name of your monitor. This information will not affect the actual execution of
Using the Software
10.You have finished setting up your monitor. Execute
Natural Color
Natural Color Software Program
One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Elec- tronics & Telecommunications Research Institute (ETRI). This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images. For more information, refer to Help (F1) in the software program.
How to install the Natural Color software
Insert the CD included with the Samsung monitor into the
To install the program manually, insert the CD included with the Samsung monitor into the
How to delete the Natural Color software program
Select "Setting/Control Panel" on the "Start" menu and then
Using the Software
MultiScreen
Installation
1.Insert the installation CD into the
2.Click the MultiScreen installation file.
Note
If the popup window to install the software for the main screen is not displayed, proceed with the installation using the MultiScreen executable file on the CD.
3.When the Installation Shield Wizard window appears, click "Next".
4.Select "I agree to the terms of the license agreement" to accept the terms of use.
5.Choose a folder to install the MultiScreen??? program.
6.Click "Install".
7.The "Installation Status" window appears.
8.Click "Finish".
9.When the installation is complete, the Multiscreen executable icon appears on your desktop.
Multiscreen execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key.
Installation Problems
The installation of MultiScreen can be affected by such factors as the video card, motherboard and the network environment.
System Requirements
OS
???Windows 2000
???Windows XP Home Edition
???Windows XP Professional
???Windows Vista???
It is recommended using MultiScreen in Windows?? 2000 or later.
Using the Software
Hardware
???32 MB Memory above
???60 MB Hard disk space above
Uninstall
The Multiscreen program can be removed only by using the "Add or Remove Programs" option of the Windows?? Control Panel.
Perform the following steps remove Multiscreen.
Select "Setting/Control Panel" on the "Start" menu and then
Select Multiscreen from the list and then click the "Add/Delete" button.
Adjusting the Monitor
Direct Functions
OSD Lock & Unlock
This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings.
Lock : Hold down the MENU button for more than five (5) seconds to activate the OSD ad- justment lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to deactivate the OSD adjustment lock function.
Note
Though the OSD adjustment lock function is activated, you can still adjust the brightness and contrast, and adjust Customized Key (
) using the Direct button.
Customized key
You can customize key assignment for the Custom button according to your preferences.
To view the operating screen displayed when pressing the [ 
] button after configuring the customized key for a function, click the name of each function.
( MagicBright - Image Size)
Note
You can configure the customized key for a required function via Setup > Customized Key.
Adjusting the Monitor
Brightness
When OSD is not on the screen, push the Brightness (
) button to adjust brightness.
Contrast
When OSD is not on the screen, push the Contrast (
) button to adjust Contrast.
OSD Function
Picture
Brightness
(Not available in MagicBright mode of Dynamic Contrast.)
Adjusting the Monitor
You can use the
MENU ??? 
??? 
??? 
, 
??? MENU
Contrast
(Not available in MagicBright mode of Dynamic Contrast.)
You can use the 
??? 
, 
??? 
??? 
, 
??? MENU
MagicBright
Push the 
button to circle through available preconfigured modes.
MagicBright is a new feature providing optimum viewing environment depending on the con- tents of the image you are watching. Currently seven different modes are available: Cus-
Adjusting the Monitor
tom, Text, Internet, Game, Sport, Movie and Dynamic Contrast. Each mode has its own pre- configured brightness value. You can easily select one of seven settings by simply pressing Customized Key control button.
???Custom
Although the values are carefully chosen by our engineers, the
If this is the case, adjust the brightness and contrast by using the OSD menu.
???Text
For documents or works involving heavy text.
???Internet
For working with a mixture of images such as texts and graphics.
???Game
For watching motion pictures such as a game.
???Sport
For watching motion pictures such as a sport.
???Movie
For watching motion pictures such as a DVD or Video CD.
???Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.
MENU ??? 
??? 
, 
??? 
??? 
, 
??? MENU
Color
(Not available in MagicBright mode of Dynamic Contrast.)
Color Tone
The tone of the color can be changed and one of four modes can be selected.
???Cool - Makes whites bluish.
Adjusting the Monitor
???Normal - Keeps whites white.
???Warm - Makes whites reddish.
???Custom - Select this mode when you want to adjust the image according to your prefer- ences.
MENU ??? 
, 
??? 
??? 
??? 
, 
??? MENU
Color Control
Adjusts individual Red, Green, Blue color balance.
MENU ??? 
, 
??? 
??? 
, 
??? 
??? 
, 
??? 
??? 
, 
??? MENU
Gamma
Gamma correction changes the luminance of the colors with intermediate luminance.
MENU ??? 
, 
??? 
??? 
, 
??? 
??? 
, 
??? MENU
Adjusting the Monitor
Image
Sharpness
Changes the clearance of image.
MENU ??? 
, 
??? 
??? 
??? 
, 
??? MENU
OSD
Language
You can choose one of nine languages.
Note
The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.
MENU ??? 
, 
??? 
??? 
??? 
, 
??? MENU
Adjusting the Monitor
Transparency
Change the transparency of the background of the OSD.
Display Time
The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off.
Adjusting the Monitor
Setup
Reset
Reverts the product settings to factory defaults.
??? No ??? Yes
MENU ??? 
, 
??? 
??? 
??? 
, 
??? MENU
Customized Key
You can specify a function which will be activated when the Customized Key (
) is pressed.
MENU ??? 
, 
??? 
??? 
, 
???
??? 
, 
???MENU
Off Timer
Image Size
You can change the size of the screen displayed on your monitor.
???Auto - The screen is displayed in accordance with the screen aspect ratio of the input signals.
???Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals.
Note
???Signals not available in the standard mode table are not supported.
???If the wide screen which is the optimal resolution for the monitor is set on your PC, this function is not performed.
MENU ??? 
, 
??? 
??? 
, 
???
???
, 
??? MENU
Information
Shows a video source, display mode on the OSD screen.
MENU ??? 
, 
???MENU
Troubleshooting
Note
Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.
1.Turn off both your computer and the monitor.
2.Unplug the video cable from the back of the computer.
3.Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or damaged.
4.Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.
Warning Messages
If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.
Environment
The location and the position of the monitor may influence the quality and other features of the monitor.
If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room.
Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor.
Troubleshooting
Useful Tips
A monitor recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the monitor to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer.
Judging the monitor's working condition
If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1680 x 1050 120 Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on.
If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition.
In this case, check the computer for trouble.
Check List
Note
Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the In- formation section or contact your dealer.
No images on the screen. I cannot turn on the monitor.
Q:Is the power cord connected properly?
A:Check the power cord connection and supply.
Q:Can you see "Check Signal Cable" on the screen?
A:Check the signal cable connection. (Connected using the DVI cable)
Press ???
??? button to have the monitor
Q:If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen.
A:If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card.
(Refer to the Preset Timing Modes)
If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.
Q:Can you see "Not Optimum Mode", "Recommended Mode 1680 x 1050 120 Hz" on the screen?
A:You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.
A:Adjust the maximum resolution and frequency that the monitor can handle properly.
A:If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1680 x 1050 120 Hz" message is displayed. If the display exceeds 85 Hz, the
Troubleshooting
display will work properly but the "Not Optimum Mode", "Recommended Mode 1680 x 1050 120 Hz" message appears for one minute and then disappears.
Please change to the recommended mode during this
(The message is displayed again if the system is rebooted.)
Q:There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals?
A:The monitor is in PowerSaver mode.
A:Press a key on the keyboard to activate the monitor and restore the image on the screen.
A:If there is still no image, press the '
' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.
Q:Connected using the DVI cable?
A:You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals. Connect the DVI cable and then reboot the system.
I cannot see the On Screen Display.
Q:Have you locked the On Screen Display (OSD) Menu to prevent changes?
A:Unlock the OSD by pressing the [MENU/ 
] button for at least 5 seconds.
The screen shows strange colors or just black and white.
Q:Is the screen displaying only one color as if looking at the screen through a cellophane paper?
A:Check the signal cable connection.
A:Make sure the video card is fully inserted in its slot.
Q:Have the screen colors become strange after running a program or due to a crash between applications?
A:Reboot the computer.
Q:Has the video card been set properly?
A:Set the video card by referring to the video card manual.
The screen suddenly has become unbalanced.
Q:Have you changed the video card or the driver?
A:Adjust screen image position and size using the OSD.
Q:Have you adjusted the resolution or frequency to the monitor?
A:Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).
Troubleshooting
Q:The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.
The screen is out of focus or OSD cannot be adjusted.
Q:Have you adjusted the resolution or frequency on the monitor?
A:Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing Modes).
LED is blinking but no images on the screen.
Q:Is the frequency properly adjusted when checking the Display Timing on the menu?
A:Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.
(The maximum frequency per resolution may differ from product to product.)
There are only 16 colors shown on the screen. The screen colors have changed after changing the vid
Q:Have the Windows colors been set properly?
A:Windows XP :
Set the resolution at the Control Panel ??? Appearance and Themes ??? Display ??? Set- tings.
A:Windows ME/2000 :
Set the resolution at the Control Panel ??? Display ??? Settings.
Q:Has the video card been set properly?
A:Set the video card by referring to the video card manual.
There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".
Q:Have you installed the monitor driver?
A:Install the monitor driver according to the Driver Installation Instructions.
Q:See the video card manual to see if the Plug & Play (VESA DDC) function can be supported.
A:Install the monitor driver according to the Driver Installation Instructions.
Check the following items if there is trouble with the monitor.
Check if the power cord and the video cables are properly connected to the computer.
Check if the computer beeps more than 3 times when booting.
(If it does, request an a service for the main board of the computer.)
If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.
Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.
(Do not exceed 75 Hz when using the maximum resolution.)
Troubleshooting
If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter in the "Control Panel ??? System ??? Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.
Note
If problems repeatedly occur, contact an authorized service center.
Q & A
Q:How can I change the frequency?
A:The frequency can be changed by reconfiguring the video card.
A:Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)
Q:How can I adjusts the resolution?
A:Windows XP:
Set the resolution in the Control Panel ??? Appearance and Themes ??? Display ??? Set- tings.
A:Windows ME/2000:
Set the resolution in the Control Panel ??? Display ??? Settings.
A:Windows ME/2000:
Set the resolution at the Control Panel ??? Display ??? Screen Saver.
Set the function in the
Q:How can I clean the outer case/LCD Panel?
A:Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let any water enter the monitor.
Note
Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the In- formation section or contact your dealer.
Specifications
General
General
Input Signal, Terminated
DVI(Digital Visual Interface) Compliant Digital RGB
75 ???? 10 %
Maximum Pixel Clock
245 MHz (Digital)
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ?? 3 Hz
Signal Cable
Dimensions (W x H x D) / Weight (Simple Stand)
516.8 x 372.7 x 71.2 mm ( 20.3 x 14.7 x 2.8 inch) (Without Stand)
516.8 x 421.3 x 208.7 mm ( 20.3 x 16.6 x 8.2 inch) (With Stand) / 5.2 kg ( 11.5 lbs)
VESA Mounting Interface
100 x 100 mm
Environmental considerations
Specifications
Environmental considerations
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interac- tion of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
For example, the number of
5,292,000.
Note
Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a
sumption
This monitor is EPA ENERGY STAR?? compliant and ENERGY 2000 compliant when used with a computer equipped with VESA DPM functionality.
As an ENERGY STAR?? Partner, SAMSUNG has deter- mined that this product meets the ENERGY STAR?? guidelines for energy efficiency.
Specifications
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor- izontal Cycle is called the Horizontal Frequency. Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz
Information
For Better Display
Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT- LCD.
???Resolution: 1680 x 1050
???Vertical frequency (refresh rate): 120 Hz
???For example, the number of
5,292,000.
When cleaning the monitor and the panel outside, please apply the recom- mended small amount of cleaner by using a soft cloth to polish. Do not force the LCD area but rub softly.
If excessive force is applied, you may stain it.
If you are not satisfied with the picture quality, you can get better quality of picture by performing the "Auto Adjustment function" in display screen that is ap- peared as window termination button is pressed.
If there's still noise after the automatic adjustment, use the Fine/Coarse adjustment function.
When viewing a fixed screen for an extended period of time, a residual image or blurriness may appear.
Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time.
PRODUCT INFORMATION (Image Retention Free)
LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time.
This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention.
Warranty
Warranty does not cover any damage caused by image retention.
What is Image retention ?
Information
During normal operation of a LCD panel, pixel image retention doesn't occur. How- ever, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention. This is not a product de- fect.
Please follow the suggestions below to protect your LCD from image retention.
Power Off, Screen Saver, or Power Save Mode
Ex)
???Turn the power off when using a stationary pattern.
???Turn the power off for 4 hours after 20 hours in use
???Turn the power off for 2 hours after 12 hours in use
???Use a Screen saver if possible
???Screen saver in one color or a moving image is recommended.
???Set the Monitor to power off with the PC Display Properties Power Scheme.
Suggestions for specific applications
Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems We recommend that you follow set up of your display system program as below:
Display Information together with Logo or Moving image cycle.
Ex) Cycle : Display Information for 1 hour followed by a Display Logo or moving image for 1 minute.
Change the Color Information periodically (Use 2 different colors).
Ex) Rotate the Color Information with 2 colors every 30 minutes.
Avoid using a combination of characters and background color with large difference in luminance.
Avoid using Grey colors, which can cause Image retention easily.
???Avoid: Colors with big difference in luminance (Black & White, Grey) Ex)
Information
???Recommended settings: Bright colors with little difference in luminance
???Change the characters color and background color every 30 minutes Ex)
???Every 30 minutes, change the characters with movement. Ex)
The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it.
Image retention may not occur when a LCD panel is operated under normal con- ditions.
Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern
To prevent this, the accumulated voltage difference must be decreased.
Information
Our LCD Monitor satisfies
Appendix
Contact SAMSUNG WORLDWIDE
Note
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Appendix
Terms
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other Euro- pean countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please sep- arate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of ma- terial resources.
Household users should contact either the retailer where they purchased this product, or their local gov- ernment office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase con- tract. This product should not be mixed with other commercial wastes for disposal.
Authority
Information in this document is subject to change without notice.
?? 2008 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Elec- tronics Co., Ltd. is strictly forbidden.
Appendix
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this ma- terial.
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR?? name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR?? Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR?? guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.
){kind=link}
){kind=link}