LCD TV

quick start guide

imagine the possibilities

Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at

www.samsung.com/global/register

Connections

Caution

???When connecting an external device, match the colour of the connection terminal to the cable.

???The product colour and shape may vary depending on the model.

???Each Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.

???Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

Connecting a Cable Box/Satellite receiver (Set-Top Box) via HDMI

CABLE BOX/SATELLITE

RECEIVER (SET-TOP BOX)

REAR PANEL

1

TV REAR PANEL

1.Connect an HDMI Cable(Not supplied) between the HDMI IN (1, 2) jack on the TV and the HDMI jack on the Cable Box/Satellite receiver (Set-Top Box).

N No additional Audio connection is needed for an HDMI to HDMI connection.

English - 

Connecting a Cable Box/Satellite receiver (Set-Top Box) via DVI

1.Connect an HDMI Cable(Not supplied) between the HDMI IN 2 jack on the TV and the HDMI jack on the Cable Box/Satellite receiver (Set-Top Box).

2.Connect Audio Cables(Not supplied) between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the Cable Box/Satellite receiver (Set-Top Box).

N When using an HDMI/DVI cable(Not supplied) connection, you must use the HDMI IN2 jack.

English -

Connecting a Cable Box/Satellite receiver (Set-Top Box) via Component cables

CABLE BOX/SATELLITE

RECEIVER (SET-TOP BOX)

REAR PANEL

21

TV REAR PANEL

1.Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [PR, PB, Y] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box).

2.Connect Audio Cables(Not supplied) between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box).

English - 

Memorizing the Channels

Your TV can memorize and store all of the available channels for both ???off-air??? (Air) and ???Cable??? channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Manager).

2.Press the ENTER button.

Repeatedly press the ??? or ??? button to cycle through these choices: ???Air???, ???STD???, ???HRC???, or ???IRC??? (all cable TV)

Press the ENTER button to select.

N STD, HRC and IRC identify various types of cable TV systems.

Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected

NThe TV automatically cycles through all of the available channels and stores

them in memory. This takes about one to two minutes. Press the ENTER button at any time to interrupt the memorization process and return to the ???Channel??? menu.

4.After all the available channels are stored, the ???Channel??? menu reappears. Press the EXIT button to exit.

NTo stop the search before it has finished, press the ENTER button with ???Stop??? selected.

English - 

Troubleshooting

English -