E138A 00141K(Cover)XTC 4/9/03 10:20 AM Page 2
DVD PLAYER
E138A 00141K(Cover)XTC 4/9/03 10:20 AM Page 2
DVD PLAYER
E138A
Precautions
1.. Setting up
Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your play. Install your player horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy devices on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player ensure the disc tray is empty. This player is designed for continuous use.
Switching off the DVD player to the
21.. ForSettingyourupsafety
Never open the player or any of its components. It can be dangerous for you or certain fragile components. You could receive an electric shock or touch the laser beam. Do not place your eyes close to the opening of the disc tray or any other opening to look inside the player.
31.. CautionSetting up
Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the mains electricity supply if the player malfunctions.
Your player is not intended for industrial use but for domestic purposes only. Use of this product is for personal use only. If your player or disc has been stored in a cold atmosphere for example during transportation in the winter, wait for approximately 2 hours until they have reached room temperature, before use.
41.. DiscSetting up
Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place disc with the label facing upward (in case of a single side disc). Always use a soft cloth to clean disc if necessary, wipe from the centre to the border. Always put disc back into their cases after playing and store in vertical position. Always place the disc properly into the tray using the proper guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a circular motion, since circular scratches are likely to occur and could cause noise during playback.
51.. EnvironmentalSetting up info
Batteries: The battery used in this product contains chemicals that are harmful to the environment. Do not dispose of batteries in the general domestic waste. It is recommended that the replacement of the battery should be done by a technician.
Disposal of old equipment and packaging: Old equipment and packaging should not be disposed of as domestic waste, but in accordance with the appliable regulations.
6. Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
???Do not use benzene, thinner, or other solvents for cleaning.
???Wipe the cabinet with a soft cloth.
Precautions
E138A
Before you start
Accessories
User???s ManualVideo/Audio Cable
1 Open the battery cover on the back of the remote.
2 Insert two AA batteries. Make sure that the polarities (+ and
3 Replace the battery cover.
???Check the polarity + - of the batteries
???Check if the batteries are drained.
???Check if remote sensor is blocked by obstacles.
???Check if there is any fluorescent lighting nearby.
4
5
E138A
General Features
Disc Type and Characteristics
Excellent Sound
Dolby Digital, a technology developed by Dolby Laboratories provides crystal clear sound reproduction.
Screen
Video with
Slow Motion
An important scene can be viewed in slow motion.
Programmed Play
You can program tracks to play in desired order. (CD, WMA, MP3)
Parental Control
The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.
Various
You can select various languages (Audio/Subtitle) and screen angles while enjoying movies.
Easy View
Easy View can convert Letter Box images to full screen viewing on your conventional TV.
Digital Photo Viewer (JPEG)
You can view the Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA files.
Instant Replay
This function is used to replay the previous 10 seconds of the movie from the current position.
Instant Skip
This function skips playback ahead 10 seconds.
Progressive Scan
Progressive scanning creates an improved picture with double the scan lines of a conventional interlaced picture.
* Discs which cannot be played with this player.
???CDI
???HD layer of super Audio CD
???CDGs play audio only, not graphics.
*Ability to play back may depend on recording conditions.
COPY PROTECTION
???Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
???This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
E138A
Front Panel Controls
1.STANDBY/ON
???When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again, the light goes out and the player is turned on.
2.MIC 1
???Connect microphone 1 for Karaoke functions.
3.MIC 2
???Connect microphone 2 for Karaoke functions.
4.VOLUME
???Use to adjust microphone volume level.
5.DIGITAL ECHO
???Use to adjust echo delay.
6.DISC TRAY
???Load the disc here.
7.DISPLAY
???Operation indicators are displayed here.
8.OPEN/CLOSE
???Press to open and close the disc tray.
9.PLAY/PAUSE ( 
)
???Begin or pause disc play.
10.STOP ( 
)
???Stops disc play.
11.SKIP ( 
/ 
)
???Use to skip a scene or music.
12.EZ VIEW
???Easy View can convert Letter Box images to full screen viewing on your conventional TV.
13.SHUTTLE
???Use during DVD and CD play to fast forward or reverse.
E138A
Display Indicators
1
Front Panel Display
1.Disc type indicators
2.Play / Pause / Forward play
3.Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
10
Rear Panel
1.DIGITAL AUDIO OUT JACKS
???Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2.5.1CH ANALOG AUDIO OUT JACKS
???Connect to an amplifier with 5.1ch analog input jacks.
3.MIXED AUDIO OUT JACKS
???Connect to the Audio input jacks of your television, audio/video receiver.
4.VIDEO OUT JACK
???Use a video cable to connect to the Video input jack on your television.
???The VIDEO OUT SELECT switch must be set to the 525i(480i) or
5.
???Use the
???The VIDEO OUT SELECT switch must be set to the
6.COMPONENT VIDEO OUT JACKS
???Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with
???If 525P(480P) VIDEO is selected, progressive scan mode will work.
???If 525i(480i) VIDEO is selected, interlaced scan mode will work.
7.VIDEO OUT SELECT SWITCH
???Use this switch to set video out.
???If 525P(480P) VIDEO is selected, VIDEO and
Important Note
???Consult your TV User???s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User???s Manual???s instructions regarding Progressive Scan settings in the TV???s menu system.
E138A
SETUP
Rear Panel
1.DIGITAL AUDIO OUT JACKS
???Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2.ANALOG AUDIO OUT JACKS
???Connect to the Audio input jacks of your television, audio/video receiver.
3.VIDEO OUT JACKS
???Use a video cable to connect to the Video input jack on your television.
4.
???Use the
5.COMPONENT VIDEO OUT JACKS
???Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with
The COMPONENT must be selected in the VIDEO OUT SELECT.
6.VIDEO OUT SELECT SWITCH
???Use the switch to set video out. If COMPONENT is selected,
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
E138A
Tour of the Remote Control
2
Tour of the Remote Control
???This function is used to replay the previous 10 seconds of the movie from the current position.
5.EZ VIEW Button
???Easy View can convert Letter Box images to full screen viewing on your conventional TV.
6.SEARCH Buttons ( 
/ 
)
???Allows you to search forward/backward through a disc.
7.STOP Button ( 
)
8.DISC MENU Button
???Brings up the Disc menu.
19.INFO Button
???Displays the current disc mode.
20.ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Buttons)
???This button functions as a toggle switch.
21.ANGLE Button
???Use to access various camera angles on a DVD.
22.MODE Button
???Allows you to program a specific order.
23.SUBTITLE Button
24.AUDIO Button
9.TITLE MENU Button
???Brings up the Title menu.
10.CLEAR Button
???Use to remove menus or status displays from the screen.
11.BOOKMARK Button
12.MENU Button
???Brings up the DVD player???s setup menu.
13.OPEN/CLOSE Button
???To open and close the disc tray.
14.3D Button
15.I.SKIP Button
???This function skips playback ahead 10 seconds.
???Use this button to access various audio functions on a disc.
25.REPEAT
???Use to mark a segment to repeat between A and B.
26.REPEAT Button
???Allows you to repeat play a title, chapter, track, or disc.
27.ZOOM Button
???Enlarges the DVD picture.
E138A
Tour of the Remote Control
Tour of the Remote Control
SETUP
2
DVD Function Buttons
1.DVD POWER Button
???Turns the power on or off.
2.NUMBER Buttons
3.STEP Button
???Advances play one frame at a time.
4.I.REPLAY Button
???This function is used to replay the previous 10 seconds of the movie from the current position.
5.EZ VIEW Button
???Easy View can convert Letter Box images to full screen viewing on your conventional TV.
6.SEARCH Buttons ( 
/ 
)
???Allows you to search forward/backward through a disc.
7.STOP Button ( 
)
8.DISC MENU Button
???Brings up the Disc menu.
9.TITLE MENU Button
???Brings up the Title menu.
10.CLEAR Button
???Use to remove menus or status displays from the screen.
11.BOOKMARK Button
12.MENU Button
???Brings up the DVD player???s setup menu.
13.OPEN/CLOSE Button
???To open and close the disc tray.
14.3D Button
15.I.SKIP Button
???This function skips playback ahead 10 seconds.
16.PLAY/PAUSE Button ( 
)
???Begin/Pause disc play.
17.SKIP Buttons ( 
/ 
)
???Use to skip the title, chapter, or track.
18.RETURN Button
???Returns to a previous menu.
19.INFO Button
???Displays the current disc mode.
20.ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Buttons)
???This button functions as a toggle switch.
21.ANGLE Button
???Use to access various camera angles on a DVD.
22.MODE Button
???Allows you to program a specific order.
23.SUBTITLE Button
24.AUDIO Button
???Use this button to access various audio functions on a disc.
25.KARAOKE Button
???Use to begin Karaoke functions.
26.REPEAT Button
???Allows you to repeat play a title, chapter, track, or disc.
27.ZOOM Button
???Enlarges the DVD picture.
E138A
Tour of the Remote Control
Tour of the Remote Control
SETUP
DVD Function Buttons
3
1.DVD POWER Button
???Turns the power on or off.
2.ZOOM Button
???Enlarges the DVD picture.
3.NUMBER Buttons
4.MENU Button
???Brings up the DVD player???s setup menu.
5.VOLUME Buttons
6.TV/VIDEO Button
7.I.REPLAY Button
???This function is used to replay the previous 10 seconds of the movie from the current position.
8.EZ VIEW Button
???Easy View can convert Letter Box images to full screen viewing on your conventional TV.
9.STOP Button ( 
)
10.DISC MENU Button
???Brings up the Disc menu.
11.TITLE MENU Button
???Brings up the Title menu.
12.ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT buttons)
???This button functions as a toggle switch.
13.CLEAR Button
???Use to remove menus or status displays from the screen.
14.BOOKMARK Button
15.REPEAT Button
???Allows you to repeat play a title, chapter, track, or disc.
18.TV POWER Button
19.SLOW Button
20.3D Button
21.OPEN/CLOSE Button
22.CHANNEL Buttons
23.I.SKIP Button
???This function skips playback ahead 10 seconds.
24.PLAY/PAUSE Button ( 
)
???Begin/Pause disc play.
25.SKIP Buttons ( 
/ 
)
???Use to skip the title, chapter, or track.
26.RETURN Button
???Returns to a previous menu.
27.INFO Button
???Displays the current disc mode.
28.ANGLE Button
???Use to access various camera angles on a DVD.
29.MODE Button
???Allows you to program a specific order.
30.SUBTITLE Button
31.AUDIO Button
???Use this button to access various audio functions on a disc.
32.KARAOKE Button
???Use to begin Karaoke functions.
16.JOG DIAL
???Operates frame by frame play. In CD mode, performs track search.
17.SHUTTLE DIAL
???Performs fast motion play.
E138A
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player with a TV and other components.
Before Connecting the DVD Player
???Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
???Refer to the owner???s manual of the additional components you are connecting for more information on those particular components.
Connection to an Audio System
AUDIO
SYSTEM
OR
DVD
PLAYER
e.g)
Choosing a Connection
Connection to a TV (For Video)
DVD
PLAYER
Important Note
Consult your TV User???s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User???s Manual???s instructions regarding Progressive Scan settings in the TV???s menu system.
E138A
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Playing a Disc
Before Play
??? Turn on your TV and press the TV/VIDEO button to select the video mode.
??? Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
TV
AV Cable
Cable
Video Cables
BASIC
FUNCTIONS
Play
R2L2
???If COMPONENT is selected,
???If
1 Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray opens.
2 Place a disc gently into the tray with the disc???s label facing up.
3 Press the PLAY/PAUSE (
) button or OPEN/CLOSE button to close the disc tray.
4 Stopping Play
Press the STOP ( 
) button during play.
5 Removing Disc
Press the OPEN/CLOSE button.
6 Pausing Play
Press the PLAY/PAUSE ( 
) or STEP button on the remote during play.
-Screen stops, no sound.
-To resume again, press PLAY/PAUSE (
) button once again.
E138A
Playing a Disc
7 Step Motion Play (Except CD)
-Each time the button is pressed, a new frame will appear.
-No sound is heard during STEP mode.
-Press PLAY/PAUSE ( 
) to resume normal play.
(You can only perform step motion play in the forward direction.)
normal during PAUSE or STEP mode, or press the SLOW button you can play slow motion for 1/8 of normal speed.
-No sound is heard during slow mode.
-Press PLAY/PAUSE (
) to resume normal play.
-When playing a DVD/VCD, reverse slow motion play will not work.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY ( 
) again, it will pick up where you left off. (unless the disc is removed, the STOP ( 
) button is pressed twice or the player is unplugged.)
???If the player is left for 5 minutes in pause mode, it will stop.
???If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off. (Automatic
???If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY (
) button to resume normal play.
Using the Search & Skip Functions
During play, you can search quickly through a chapter or track or use the skip function to jump to the next selection.
Searching through a Chapter or Track
Skipping Tracks
1 During play, press the 
or 
button.
???When playing a DVD, if you press the 
button, it moves to the next chapter. If you press the 
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of the previous chapter.
???When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if you press the 
button, it moves to the next track. If you press the 
button, it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
???If a track exceeds 15 minutes when playing a VCD and you press the 
button, it moves forward 5 minutes. If you press the 
button, it moves backward 5 minutes.
E138A
Using the Display Function
Using the Disc and Title Menu
When Playing a DVD/VCD/CD
1 During play, press the INFO button on the remote.
2 Use the UP/DOWN buttons to select the desired item.
3 Use the LEFT/RIGHT buttons to make the desired setup, then press ENTER.
???You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from the desired time.
DVD
DVD
Title 01
Chapter 02
Time 0 : 0 0 : 1 3
Audio ENG 5.1CH
Subtitle Off
3D Sound Off
ENTER
Using the Disc Menu
1 During the playback of a DVD disc, press the MENU button on the remote.
2 Select Disc Menu using the UP/DOWN buttons, then press the RIGHT or ENTER button.
DVD
Disc Menu Press ENTER key for Disc Menu
Title Menu
Function
Setup
BASIC
FUNCTIONS
4 To make the screen disappear, press the INFO button again.
VCD
VCD
Track 01
Time 0:00:48
Using the Title Menu
To access the desired title when there is more than Title one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Most of DVD discs are recorded in chapters so that 
Chapter you can quickly find a specific passage.
(similar to tracks on an audio CD).
3D Sound
CD
Off
ENTER
1 During the playback of a DVD disc, Press the MENU button on the remote.
2
DVD
Disc Menu Press ENTER key for Title Menu
Title Menu
Function
Allows playback of the film from a desired time. Time You must enter the starting time as a reference.
CD
Setup
Refers to the language of the film soundtrack. In the
Track 01
Time 0:00:48
Audio example, the soundtrack is played in English 5.1CH. A DVD disc can have up to eight different soundtracks.
Refers to the subtitle languages available in the disc. Subtitle You will be able to choose the subtitles language or, if you prefer, turn them off from the screen. A DVD disc
can have up to 32 different subtitles.
A surround sound effect is generated using only two 3D Sound front speakers.
3D Sound
Off
ENTER
*When in VCD 2.0 mode (MENU ON mode), this function does not work. Using DISC MENU button in VCD 2.0, select Menu On/Off.
???Depending on the disc, the Title and Disc Menus may not work.
???Title Menu will only be displayed if there are at least two titles in the disc.
???You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons on the remote.
???In VCD2.0, the DISC MENU button works as a conversion switch between Menu On and Menu Off mode.
E138A
Using the Function Menu
Repeat Play
Using the Function Menu
1 Press the MENU button during playback.
2 Use the UP/DOWN buttons to highlight Function, then press the RIGHT or ENTER button.
DVD
Disc Menu Info
Repeat the current track, chapter, title, a chosen section
When playing a DVD
DVD
3 Function selection screen appears, Info, Zoom, Bookmark, Repeat and EZ View.
1 Press the REPEAT button on the remote. Repeat screen appears.
-Info (See Page 26)
-Zoom (See Page 38)
-Bookmark (See Page 37)
-Repeat (See Page 29)
-EZ View (See Page 30~31)
4 Use the UP/DOWN button to highlight one of the 5 functions. Then press the RIGHT or ENTER button to access the function.
2 Select Chapter, Title or
* REPEAT
???Press the REPEAT button. Select
???Press ENTER at the point where you want the repeat play to start (A). The B is automatically highlighted.
???Press ENTER at the point where you want the repeat play to stop (B).
???To terminate the function, press the CLEAR button or the REPEAT
???
BASIC
FUNCTIONS
VCD/CD
??? You can also directly select these functions using thier respective buttons on the remote.
3 Press ENTER.
4 To return to normal play, press REPEAT again, then press the LEFT/RIGHT buttons to select Off. Press ENTER, then press the PLAY/PAUSE( 
) button.
???DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
???Depending on the disc, the Repeat function may not work.
???When in VCD 2.0 mode (MENU ON mode), this function does not work.
E138A
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
If you are using a 16:9 TV
For 16:9 aspect ratio discs
???Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
???Screen Fit
The top and bottom of the screen are cut off. When playing a 2.35:1 aspect ratio disc, the black bars at the top and bottom of the screen will disappear. The picture will look vertically stretched. (Depending on the type of disc, the black bars may not disappear completely.)
???Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
???Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.
???Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
???Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
???Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to prevent the picture from looking horizontally stretched.
Adjusting the Aspect Ratio (EZ View)
If you are using a 4:3 TV
For 4:3 aspect ratio discs
E138A
Slow Repeat play
This feature allows you slowly repeat scenes containing sports, dancing, musical instruments being played etc. so you can study them more closely.
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
3 Press the REPEAT or REPEAT
4 Press the REPEAT or REPEAT
Using the AUDIO button
1 Press the AUDIO button.
2 Use the LEFT/RIGHT buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
3 Use the LEFT/RIGHT buttons to select Stereo, LEFT or RIGHT. (On VCD/CD)
DVD
VCD/CD FUNCTIONS ADVANCED
???The disc will play from A to B repeatedly at the speed you chose.
???To terminate the function, press the CLEAR button or the REPEAT or REPEAT
???
???This function depends on what languages are encoded on the disc and may not work with all DVDs.
???A DVD disc can contain up to 8 audio languages.
???How to have the same audio language come up whenever you play a DVD;
Refer to ???Setting Up the Language Features??? on page 49.
E138A
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
1 Press the SUBTITLE button.
ENG 
On
2 Use the LEFT/RIGHT buttons to select the desired subtitle language.
3 Use the UP/DOWN buttons to determine whether or not the subtitle will be displayed.
- The subtitle languages are represented by abbreviations.
Changing the Subtitle color
1 Press the MODE button to change the subtitle color only when the player is in progressive video mode.
???This function depends on what languages are encoded on the disc and may not work with all DVDs.
???A DVD disc can contain up to 32 subtitle languages.
???How to have the same subtitle language come up whenever you play a DVD;
Refer to ???Setting Up the Language Features??? on page 49.
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle function.
E138A
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using this function.
1 If you press the I.REPLAY button, the current scene moves backward about 10 seconds, and plays back.
-Depending on the disc, the Instant Replay function may not work.
Using the Instant Skip function (DVD)
Use this function to skip playback 10 seconds ahead of the current scene.
1 Press the I.SKIP button.
-Playback will skip ahead 10 seconds.
-Depending on the disc, this feature may not work.
1 During play, press the BOOKMARK button on the remote.
2 Use the LEFT/RIGHT buttons to select the bookmark number you want to delete.
3 Press the CLEAR button to delete a bookmark number. Press the BOOKMARK button to turn off the display.
???Up to three scenes may be marked at a time.
???When in VCD 2.0 mode (MENU ON mode), this function does not work.
???Depending on the disc, the Bookmark function may not work.
E138A
Using the Zoom & 3D Sound Functions
Using the Zoom Function (DVD)
1 During play or pause mode, press the ZOOM button on the remote.
A zoom mark will be displayed on screen.
2 Use the UP/DOWN or LEFT/RIGHT buttons to select the part of the screen you want to zoom in on.
3 Press the ENTER button.
-During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in order.
-During VCD play, press ENTER to zoom in 2X/Normal in order.
Using the 3D Sound Function
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo 
Off 
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs.
(Discs which are recorded with LPCM or DTS will not work. )
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder plays.
??? If more than two file extensions are present, select the media of your choice by pressing UP/DOWN, then press the ENTER button.
???To change the currently playing media, press the STOP ( 
) button twice and then press the DISC MENU button.
time. If you have more than 8 folders on a disc, press the LEFT/RIGHT buttons to bring them up on the screen.
ENTER RETURN MENU
2 Use the UP/DOWN buttons to select the desired music folder, then press ENTER. Use the UP/DOWN buttons again to select a song file. Press ENTER to begin playback of the song file.
Program/Random playback
1
2
During play, press the 3D button.
The 3D SOUND mark will be displayed on screen.
Press the UP/DOWN buttons to turn the 3D Sound feature on or off.
???3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL. However, some of these discs do not contain rear channel sound signals.
???Depending on the disc, the Zoom and 3D Sound functions may not work.
???Press the REPEAT button to hear only music continuously and press it once again to release.
???PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
E138A
MP3/WMA Play
Program Play & Random Play
When playing
Program Play (CD/MP3/WMA)
1 Press the MODE button.
2 Use the LEFT/RIGHT buttons to select PROGRAM. Press the ENTER button.
3 Use the UP/DOWN/LEFT/RIGHT buttons to select the first track to add to the program. Press the ENTER button. The selection numbers appear in the Program Order box.
4 The disc will be played in programmed order.
Random Play (CD/MP3/WMA)
1 Press the MODE button.
2 Use the LEFT/RIGHT buttons to select RANDOM. Press the ENTER button. The disc will be played in random order.
PROGRAM 
RANDOM
PROGRAM 
RANDOM
???Depending on the disc, the Program and Random Play functions may not work.
???To resume normal play, press the CLEAR button.
???PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
???This unit can support a maximum of 99 programmed order.
E138A
Picture CD Playback
Picture CD Playback
1 Open the disc tray.
2 Load the disc on the tray.
- Load the disc with the labeled side up.
3 Close the tray.
- The tray closes and you should get a screen that looks like the one to the right.
??? Select JPEG in the menu to view a Photo CD.
??? Use the UP/DOWN or LEFT/RIGHT buttons on the remote controller to select the picture you want to view and then press the ENTER
Press the UP/DOWN or LEFT/RIGHT buttons on the remote controller to display the menu again.
??? 
: Each time the ENTER button is pressed, the picture rotates 90 degrees clockwise.
??? : Each time the ENTER button is pressed, the picture is enlarged up to 4X. (Normal ??? 2X ??? 4X??? 2X??? Normal)
??? 
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
ENTER
ENTER
PHOTO: 1 /215
PHOTO: 1 /215
ENTER RETURN
??? 
: The pictures change automatically with about an 12 second interval.
??? 
: The pictures change automatically with about an 18 second interval.
*Depending on the file size, each interval between images may take longer or shorter than the manual suggests.
E138A
Beginning Karaoke Functions
Operation Sequence
1 Connect the Mixed Audio Out terminals with the TV or AMP.
2 Connect Mic into Mic 1 or Mic 2 jack.
- When the MIC should be connected, karaoke function can operate.
Key Control
1 Press the KARAOKE button.
2 Select the "Keycon" using the LEFT/RIGHT buttons.
3 By use of the LEFT/RIGHT buttons, change to the desired tone.
: To let 7 scales down by half scale.
???If you hear strange noises(squealing or howling) while using the karaoke feature, move the microphone away from the speakers. Turning down the microphone volume or the speaker volume is also effective.
???The next music plays if performing SEARCH with SCORE displayed in the Score On MODE for CD or VCD.
???When playing MP3 disc, MIC & Karaoke functions are not operate.
???When playing LPCM disc, karaoke functions are not operate.
???When the MIC is connected, Digital Out does not work.
Reserving a Song
It is the function to reserve the desired song in advance by use of Karaoke function
Sequence of reservation
1 Playback the Karaoke Disc containing the wanted songs.
2
3 Select the "Request" using the LEFT/RIGHT buttons.
4 Input the number (Track No.) of the desired song into the flickering
- You can reserve up to 10 songs.
5 When you want the next reserved song during playing a song, press the SKIP button.
2 Continuous pressing of the CLEAR button can cancel the next reserved song.
3 If the reservation is required again, input the song number in the flickering part.
???When using "SKIP" button, it can not work at the last song.
???When using Request function, the "DISPLAY" and ???REPEAT??? function does not work.
E138A
Vocal Function
Sequence of reservation
1 Pressingfollowing:the KARAOKE button twice displays the
Vocal Fader
???The function to make the music only sound by cancelling vocal when playing a Karaoke disc.
??? In VCD, CVD or CD, you can select only the On or Off.
Guide Melody
???To guide melody through xylophone and piano help you sing easily.
???This function works only on the DVD Karaoke disc on which the guide melody is recorded.
Score Function
Press KARAOKE button twice to turn the Score Mode On.
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have.
With the unit in Stop mode, press the MENU button
Title Menu
Display Setup : Setup of the Display Options Use to select which type of screen you want to watch and several display options.
Parental Setup : Setup of the Parental Level Allows users to set the level necessary to prevent children from viewing unsuitable movies such as those with violence, adult subject matter, etc.
2 Use the UP/DOWN buttons on the remote to access the different features.
3 Press the ENTER button to access the sub features.
SETUP
Types of Karaoke disc
??? DVD Karaoke Disc
??? CVD, VCD Karaoke Disc
To make the setup screen disappear after setting up, press the MENU button again.
Depending on the disc, some Setup Menu selections may not work.
CHANGING MENU
E138A
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie.
Setting Up the Language Features
Using the Audio Language
1 With the unit in Stop mode, press the MENU button.
Using the Player Menu Language
1 With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Select Player Menu using UP/DOWN buttons, then press the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ???English???.
6 Press the ENTER button.
-English is selected and the screen returns to SETUP menu.
-To make the SETUP menu disappear, press the RETURN or LEFT button.
Using the Disc Menu Language
This function changes the text language only on the disc menu screens.
1 With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Select Disc Menu using UP/DOWN buttons, then press the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ???English???.
- Select ???Others??? if the language you want is not listed.
6 Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
e.g) Setting up in English.
LANGUAGE SETUP
e.g) Setting up in English.
DISC MENU LANGUAGE
Disc Menu
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Select Audio using UP/DOWN buttons, then press the RIGHT or ENTER button.
5 Press the UP/DOWN buttons to select ???English??? .
-Select ???Original??? if you want the default soundtrack language to be the original language the disc is recorded in.
-Select ???Others??? if the language you want is not listed.
6 Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
Using the Subtitle Language
1
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
during set up; Press RETURN or
E138A
Setting Up the Audio Options
Surround Sound Speaker Setup
1 With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.
Digital Output
1
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Select Multi Channel Output using UP/DOWN buttons. Then select Analog pressing the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select Speaker Setup. Then press the RIGHT or ENTER button.
6 Use the UP/DOWN or LEFT/RIGHT buttons to select the desired item. Then press the ENTER button.
The default settings : FRONT L , R (Large), CENTER(None), SURROUND (None)
Select the size of the speakers to be connected.
AUDIO SETUP
AUDIO SETUP
DTS
1.Off : Doesn???t output digital signal.
2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
1.On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.
2.Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Multi Channel Output
1.Digital : Select this when using the multichannel digital audio output.
2.Analog : Select this when using the multichannel analog audio output.
Speaker Setup
???How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
???Manufactured under license from Dolby Laboratories.
???Dolby??? and the
??????DTS??? and ???DTS Digital Out??? are trademarks of Digital Theater Systems, Inc.
50
Setting up TEST
The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system.
51
E138A
Setting Up the Display Options
Setting Up the Display Options
1 With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.
TV Aspect
Still Mode
Screen Messages
Front Display
Black Level
TV ASPECT
4:3 Letter Box
4:3 Pan Scan
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen. 2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
16:9 Wide
???How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
E138A
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
Controlling a TV with the Remote
The remote can also be set up to control most TVs. To program the remote, use the code that corresponds to your brand.
1 With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Parental Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Use RIGHT or ENTER to select Yes if you want to use a password. The Enter Password screen appears.
5 Enter your password. The
The Parental Control screen appears.
About the Rating Level ;
The Rating Level will work only when Use Password is set to Yes. To unlock the player, use UP/DOWN to select No. Use RIGHT or ENTER to select Rating Level. Press ENTER.
CREATE PASSWORD
Enter Password
- - - -
TV Codes
-Use UP/DOWN to select the level(e.g. Level 6) and press ENTER. Discs that contain Level 7 will now not play.
-To cancel the rating level, use RIGHT or ENTER to select No in Use Password.
About the Change Password ;
-Use UP/DOWN to select Change Password.
Press ENTER. The Change Password screen appears.
-Enter your new password.
PARENTAL SETUP
1 Turn on the TV.
2 Point the DVD???s remote at the TV.
3 While holding the TV POWER button down, enter the code for your brand.
4 If the TV turns off, setup is complete.
Enter other codes of the same brand if the first code does not work.
5 To operate the TV, use the ???TV Function Buttons??? described on page 19.
CHANGING SETUP
e.g) Setting up in LEVEL6.
e.g) For SAMSUNG _1 TVs
MENU
???How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
???If you have forgotten your password, see Forget Password in the Troubleshooting Guide.
RATING LEVEL
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
While holding down the TV POWER button, enter 0 and then 1.
The remote may not be able to control every model TV of the brands listed.
E138A
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem
No operations can be performed with remote.
Disc does not play.
5.1 channel sound is not being reproduced.
Disc Menu doesn???t appear.
Play mode differs from the Setup Menu selection.
The screen ratio cannot be changed.
No audio.
Forgot password
If you experience other problems.
Action
???Check the batteries in the remote. May need replacing.
???Operate the remote control at a distance of no more than 20 feet.
???Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote to reset it. Reinstall batteries and try remote again.
???Ensure that the disc is installed with the label side facing up.
???Check the region number of the DVD.
???5.1 channel sound is reproduced only when the following conditions are met. :
1)The DVD player is connected with the proper amplifier
2)The disc is recorded with 5.1 channel sound.
???Check whether the disc being played has the ???Dolby 5.1 ch??? mark on the outside.
???Check if your audio system is connected and working properly.
???In a SETUP Menu, is the Audio Output set to Bitstream?
???The features or action cannot be completed at this time because:
1.The DVD???s software restricts it.
2.The DVD???s software doesn???t support the feature (e.g., angles).
3.The feature is not available at the moment.
4.You???ve requested a title or chapter number or search time that is out of range.
???Check if the disc has a Menu.
???Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function.
???The Screen Ratio is fixed on your DVDs.
???Make sure you have selected the correct Digital Output in the Audio Options Menu.
???Press power on from a cold start with no disc in the unit. Press the STOP ( 
) and PLAY ( 
) buttons simultaneously on the front panel for three seconds. The Select Menu Language display will appear. Select the desired language button. Press the MENU button on the remote control to select the Parental Mode. The Parental Mode is now unlocked as indicated on the display. Press the DOWN button to select Parental. Press ENTER and the Create Password display will appear. You can now set your rating level and change your password to a new number.
???Go to the contents and find the section of the instruction book that contains the explanations regarding the current problem, and follow the procedure once again.
???If the problem still cannot be solved, please contact your nearest authorized service center.
Page
P4
P7
P20
P50~51
P24
P47~48
P47~54
P52~53
P50~51
P54
56