Yo u r New Plantronics Aviation Headset
Easy to Wear, Easy to Use
The MS50 attaches to a headband or eyeglasses. It offers lightweight comfort and the dependability that has made us part of every
Plantronics MS50 aviation headsets are FAA approved and TSO certi???ed.
To get the maximum bene???t from your new headset and accessories, read this user???s guide carefully.
1. Select Proper Size Eartip
Select the eartip size so that the bulb portion ???ts snugly into the ear canal. Clean or replace eartips regularly and ensure that the clear tube is not kinked.
Caution: If you have a history of ear infections or allergies to plastics, you should exercise care in using the eartip.
2. Attaching the Eartip to the Capsule
Slide the end of the eartip onto the metal sound port on the capsule and gently twist it. Adjust the tube so that it rests in the position shown in the photo.
3. Putting on the Headset
Accessories and Replacement Parts List
PLANTRONICS PART NUMBER
User???s Guide
Aviation Headset Warranty
The Warranty period lasts for one year from the manufacturing date code, date of order or date of shipment, whichever is latest.
?? 2011 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics and the logo design combined, the voice tube clear color trade dress, and the shape trade dress are trademarks
or registered trademarks of Plantronics, Inc.
Insert the pivoting arm under the spring clip, as shown. The pivoting arm on which the capsule is mounted allows you to wear the capsule on the left or right side with the headband over the top of, or behind your head. Make certain the capsule is on the outside of the pivoting arm. Place the eartip in the opening of the ear canal.
Plantronics Inc., 345 Encinal Street / Santa Cruz, CA 95060
(800)
4. Adjusting the Voice Tube
Place the voice tube near the corner of the mouth just below, but not directly in front of, your lips, as shown. Move the headband pivot bar up and down to position the tube vertically, and rotate the tube itself for horizontal positioning. If necessary, you can move the capsule laterally on the pivot arm.
5. Adjusting the Clothing Clip
Attach the clothing clip to a part of your clothing at about chest level. Press the ends of the cable clamp to allow enough slack ??? approxi- mately six inches (15cm)??? between your headset and the clothing clip.
Try moving your head from side to side to ensure that you have allowed suf???cient cable slack between the headset and the clothing clip.
Care and Maintenance
???Periodically wipe off the capsule and voice tube or boom using a soft cloth which may be dampened with water.
???Do Not use alcohol, cleaning solvents, or detergents on your headset.
6.Attaching the Headset to Glasses (optional mounting style)
The spring clip on either side of the capsule allows you to install your headset onto glasses. If your glasses have wire temples, you may order an eyeglass bow adapter to thicken the mounting base for the capsule and ensure a comfortable ???t, as shown. The bow adapter is not included with the MS50 aviation headset (order PN
Aviation headsets are available in the following models: