Firmware Update Guide
1. Read Before Use (Important)
Cautions
・Be sure to follow the procedure in this guide to update the firmware.
・DO NOT turn off the power or disconnect the USB cable unit updating is completed.
・If you should have any questions, please contact the Pioneer Customer Support Center.
Reference information
This updater has been verified to operate on the operating systems below;
・Windows: Windows® XP / Windows Vista® / Windows® 7
・Mac OS X: 10.6 / 10.7
Approximately 2 minute is required for updating.
3)When the update file for
4) The update of the firmware starts.
2. What you need for updating
・Update file for
*When the downloaded zip file is
Example)
・A computer where Java has been installed.
*If Java has not been installed, please download the Java Runtime Environment (JRE) at: http://java.com and install it on your computer.
3. Updating procedures
1)Connect the above prepared computer to
2)Turn on the power of
5) When the firmware update process is complete, click the [OK] button.
Please note that if you fail to update, turn on the power of
1/2
3. How to check the firmware version
[For Windows]
ASIO driver exclusively for
From the [Start menu],
Run [All the programs] → [Pioneer] →
[For Mac]
Open the Apple menu while pressing the option key, then select “System Profiler.”
Select the [USB] from the [Hardware] to display the name of the controller. Select the controller to display the firmware version.
About trademarks and registered trademarks
・Pioneer is a registered trademark of PIONEER CORPORATION.
・JAVA is a trademarks of Sun Microsystems, Inc. registered in the United States and other countries.
・Microsoft®, Windows Vista®, Windows® and Internet Explorer® are either
registered trademarks or trademark of Microsoft Corporation in the United States and/or other countries.
・Apple, Macintosh, Mac OS and iTunes are trademarks of Apple Inc. registered in the United States and other countries.
© 2012 PIONEER CORPORATION. All rights reserved.
PIONEER CORPORATION
2/2