EN
Welcome
Quick start guide
1
2
3
Connect transmitter
Connect receiver
Enjoy
EN
Welcome
Quick start guide
1
2
3
Connect transmitter
Connect receiver
Enjoy
What???s in the box
SLV3100 WIRELESS TVLINK TRANSMITTERSLV3100 WIRELESS TVLINK RECEIVER
A. TransmitterB. Receiver
Welcome
Quick start guide
1 Connect transmitter
2 Connect receiver
3 Enjoy
What else you???ll need
1
2
AC
1 Connect transmitter
A Connect the video source
1.Take the supplied transmitter (A)
2.Find the SCART cable from the video source that is connected to TV1.
3.Unplug the SCART cable from the video source.
4.Plug the SCART cable of the transmitter (A) into the SCART port of the video source.
TV1
B Connect TV1
1.Plug the SCART cable from TV1 into the SCART connector of the transmitter (A).
1
TV1
Firmly insert the SCART cables to the ports:
1.Plug the connector straight into the port.
2.Apply some force when you insert the connector.
C Connect the power adapter
1.Take the supplied power adapter (C).
2.Plug the connector into the DC 9V power connector on the transmitter (A).
3.Plug the adapter into the power outlet.
DC 9V
2
3
1
AC
D Check the operation of TV1
1.Switch on TV1.
2.Switch on the connected video source.
3.Select the correct SCART input on TV1.
4.Check if TV1 shows the image of the video source. > The transmitter is connected correctly.
2 Connect receiver
A Preparation
1.Switch on the transmitter (A).
2.Switch on the video source.
3.Take these items:
???Receiver (B)
???Power adapter (C)
???Remote control of a video source.
???This quick start guide (D)
4.Go to TV2.
DC 9V
ON/OFF
1
B Connect TV2
1.Plug the SCART cable of the receiver (B) into the SCART port of TV2.
C Connect the power adapter
1.Take the supplied power adapter (C).
2.Plug the connector into the DC 9V power connector on the receiver (B).
3.Plug the adapter into the power outlet.
D Check the operation of TV2
DC 9V
1 2 3 4
TV2 1
DC 9V
2
3
1
AC
1.Switch on TV2.
2.Switch on the receiver (B).
3.Select the correct SCART input on TV2.
4.Point the remote control of the video source to the receiver (B).
5.Operate the video source with its remote control.
6.Check if TV2 shows the image of the video source.
> The receiver is connected correctly.
TV2
1
SLV3100 WIRELESS TVLINK RECEIVER
4 5
Result
SLV3100 WIRELESS TVLINK TRANSMITTER
SAT/STB/DVD player
SLV3100 WIRELESS TVLINK RECEIVER
VCR/DVD recorder
3 Enjoy
A Example:View satellite programs on TV2
Your satellite receiver needs to be connected to the transmitter (A) of the wireless TV link.
1.Switch on the transmitter (A).
2.Switch on TV2.
3.Switch on the receiver (B).
4.Select the correct SCART input on TV2.
5.Point the remote control of the satellite receiver to the receiver (B).
6.Switch on the satellite receiver.
7.Operate the satellite receiver with its remote control. Enjoy!
TV1
TV2
2
SLV3100 WIRELESS TVLINK RECEIVER
5 6 7
To view other video sources, replace ??Satellite receiver?? with the name of the device used.
B View video source on TV1
1.Switch on TV1.
2.Select the correct SCART input on TV1.
3.Operate the video source as usual. Enjoy!
Troubleshooting
The video sources do not respond to the remote control commands from TV2
???Point the remote control directly to the receiver (B).
???Replace the batteries of the remote controls with new ones.
???Install the remote control blaster cord (E).
> See the user manual (F) page 6.
???The maximum operating distance of the remote control is 5 m.
The image of the video source disappears on TV2
???Turn off the auto standby mode of the video source.
>See its user manual.
???Follow the instructions to reconnect the video sources.
>See this quick start guide (D).
Need help?
User manual
See the user manual that came with your wireless TV link.
Online help: www.philips.com/support
Helpline
Speci???cations are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2005 ?? Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com