1 Connect

A Install the stand

Step 1 Insert the stand into the PhotoFrame.

Note for product

Step 2 Turn the stand clockwise 45 degrees to attach it to the PhotoFrame.

C Insert a storage device

B Connect the Mains

b a

Step 1 Connect the Mains plug to the PhotoFrame.

Step 2 Connect the Mains cord to a power supply socket.

Insert a memory card or a USB ???ash drive.

???Compact Flash type I

???Secure Digital (SD)

???Secure Digital (SDHC)

???Multimedia Card

???xD card

???Memory Stick

???Memory Stick Pro

???Memory Stick Duo

???Memory Stick Pro Duo

???USB ???ash drive

A Turn on the PhotoFrame

B Access the main menu

B Display collage photos

Step 1 In the main menu, select [Slideshow] > [Collage] > [Multi], then press

OK to con???rm.

Step 2 Select a format and press OK to con???rm.

Step 3 Press 1 (RIGHT) to select [Photo 1]. Step 4 Press 1 (RIGHT) again to select a

photo source, then press OK to con???rm.

Step 5 Select an album and press OK to con???rm.

Step 6 Select a photo and press OK to con???rm.

Step 7 Repeat steps 3 to 6 to select other photos.

Step 8 Press OK to con???rm.

If you select a collage layout, the PhotoFrame displays a static collage and the slideshow mode is deactivated.

If you select [Random] format, the PhotoFrame automatically does the random collage base on the optimal layout of photos and displays the collages in slideshow mode.

Step 9 To stop Collage display, select

[Slideshow] > [Collage] > [Single]

and press OK to con???rm.

3 Enjoy

Set the display auto

D on/off by lighting

ETip

If the [On - Set current] brightness level is too close with the [Off - Set current] brightness level, the display Auto on/off function may not work.

You can use the default brightness of ambient lighting condition and you can also set the brightness of ambient lighting condition. Step 1 In the main menu, select [Setup]

>[Options] > [Smart power]

>[Lighting], then press OK to con???rm.

Step 2 Select [Settings] and press OK to con???rm.

???To use the default setting, select [Default] and press OK to con???rm.

Step 3 Select [On - Set current] and press

OK to con???rm.

The PhotoFrame wakes up when the brightness of environment reaches the [On - Set current] brightness.

???To have the PhotoFrame sleep at the set brightness of ambient lighting condition, select [Off - Set current].

3 Enjoy

G Set an event reminder

H Create an album

Step 1 In the main menu, select [Setup] > [Options]>[Event reminder] > [New reminder], then press OK to con???rm.

Step 2 Select an alphabet and press OK to con???rm.

Step 3 When the album name

(up to 24 characters) is complete, select [Enter] and press OK to con???rm.

Step 4 Select the reminder and press OK to con???rm.

Step 5 Select [Time] and press OK to con???rm.

Step 6 Press 3 / 4 / 1 / 2 and OK to set up time, and press OK to con???rm.

Step 7 Repeat steps 5 to 6 to set date.

Step 1 In the main menu, select [Photos] > [Source] > a storage device, then press OK to con???rm.

Step 2 Select [New Album] and press OK to con???rm.

Step 3 Select an alphabet/number and press OK to con???rm.

Step 4 When the album name

(up to 24 characters) is complete, select [Enter] and press OK to con???rm.

Troubleshooting

Problem

My Digital PhotoFrame does not go into Auto-off status after I set it.

My Digital PhotoFrame is ON but the system does not respond anymore!

My Digital PhotoFrame does not show some of my photos.

Why the photos distort?

What is the difference between background, Auto fit and RadiantColor?

Tip

Ensure that you set current time, Auto off and Auto on correctly.

???Ensure that the PhotoFrame is properly powered.

???Use a pin to trigger the RESET button located on the back to restore the PhotoFrame.

???The PhotoFrame shows photos in JPEG format.

If the format of picture is different as the PhotoFrame (for example,if you set "auto fit" on the PhotoFrame, a 4x3 photo input into a (16x9) PhotoFrame may distort.You can set a background colour or set RadiantColor. A background colour keeps the correct aspect ratio but may have black bar (or the background colour you select). we recommend you to select RadiantColor to keep the correct aspect ratio with the exterior of photo colour RadiantColor does give you the best viewing experience. Users can go to: Main menu>Slideshow>Background>RadiantColor/ Auto fit/black/red/gray.

If the picture format is different as the PhotoFrame, the PhotoFrame provides several solutions for it.

1.Auto fit: it is just like wide screen TV, the PhotoFrame extends the photo to fill fully the screen with picture distortion.t

2.Background colour: the PhotoFrame displays a photo without distortion but with black bar or a selected background colour.

3.RadiantColor: the PhotoFrame displays a photo without distortion with RadiantColor. RadiantColor is a new technology that the system analyses the colour of picture edge and extend the colour to fill the screen.This does improve the viewing experience. Users can go to: Main menu>Slideshow>Backgroun d>RadiantColor/Auto fit/black/red/gray.