IMPORTANT SAFETY

INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings.

Install in accordance with the manufacturer???s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The following mark and symbols are located on rear of the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ???dangerous voltage??? within the product???s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable.

To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

RQT9334

(ENG)

2

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE,

???DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND THAT NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL BE PLACED ON THE APPARATUS.

???USE ONLY THE RECOMMENDED ACCESSORIES.

???DO NOT REMOVE THE COVER (OR BACK); THERE

ARE NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A

BOOKCASE, BUILT-IN CABINET OR IN ANOTHER

CONFINED SPACE. ENSURE THE UNIT IS WELL

VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK

OR FIRE HAZARD DUE TO OVERHEATING, ENSURE

THAT CURTAINS AND ANY OTHER MATERIALS DO NOT

OBSTRUCT THE VENTILATION VENTS.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

(Rear of product)

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the equipment and receiver. ???Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

???Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user???s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way Secaucus, NJ 07094

Support Contact:

Panasonic Consumer Electronics Company Telephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES ONLY IN CANADA.

This Class B digital apparatus complies with Canadian ICES- 003.

Batteries

1Battery pack (Lithium ion battery pack)

???Use the specified unit to recharge the battery pack.

???Do not use the battery pack with equipment other than the specified unit.

???Do not use the player outside if it is snowing or raining. (The battery pack is not waterproof.)

???Do not get dirt, sand, liquids, or other foreign matter on the terminals.

???Do not touch the plug terminals (i and j) with metal objects.

???Do not disassemble, remodel, heat or throw into fire.

???Do not heat or expose to flame.

???Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

2Button-type battery (Lithium battery)

???Insert with poles aligned.

???Do not touch the terminals (i and j) with metal objects.

???Do not recharge, disassemble, remodel, heat or throw into fire.

???Keep out of reach of children

???Do not heat or expose to flame.

???Do not leave the battery(ies) in an automobile exposed

to direct sunlight for a long period of time with doors and windows closed.

If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water.

If any electrolyte should come into contact with your eyes, never rub the eyes.

Rinse eyes thoroughly with water, and then consult a doctor.

3Disposing of the batteries

Check and follow your local regulations before disposal.

Warning

Risk of fire, explosion and burns. Do not disassemble.

Do not heat the batteries above the following temperatures or incinerate.

Button-type battery 100 xC (212 xF) Battery pack 60 xC (140 xF)

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer???s instructions.

A lithium ion battery that is recyclable powers

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material ??? special handling may apply. See

www.dtsc.ca.gov/hazardouswaste/perchlorate.

Product Identification Marking is located on the rear of unit.

Product Identification Marking is located on the bottom of AC adaptor.

AC adaptor

This AC adaptor operates on AC between 110 V and 240 V. But

???In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power supply only.

???When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration.

???When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited to the voltage of the AC supply and the rated current of the AC adaptor.

???Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or AC cord set.

WARNING

DRIVER MUST NOT OPERATE OR VIEW THIS UNIT

WHILE OPERATING THE VEHICLE.

Doing so will distract the driver and could cause a collision resulting in serious injury or property damage.

Do not rest the unit on your lap for a long time while using it. The unit can become hot and cause burns.

To prevent damage

Avoid the following:

???Spraying flammable insecticides near the unit.

???Pressing the LCD.

???Touching the lens and other parts of the laser pickup. Do not use the unit in the following places:

???Sandy places such as beaches.

???On top of cushions, sofas, or hot equipment such as amplifiers.

Do not leave in an unventilated automobile or exposed to direct sunlight and high temperatures.

Listening caution

Do not play your headphones or earphonesata high volume. Hearing experts advise against continuous extended play.

If you experience a ringing in your ears, reduce volume or discontinue use.

Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.

You should use extreme caution or temporarily discontinue use in potentially hazardous situations.

Even if your headphones or earphones are the open-air type designed to let you hear outside sounds, don???t turn up the volume so high that you can???t hear what???s around you.

Sound can be deceiving. Over time your hearing ???comfort level??? adapts to higher volumes of sound. So what sounds ???normal??? can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

???Start your volume control at a low setting.

???Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

Once you have established a comfortable sound level: ??? Leave it there.

Getting started

RQT9334

(ENG)

Accessories

Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of March 2009. These may be subject to change.)

(For U.S.A. and Puerto Rico) To order accessories, refer to ???Accessory Purchases (United States and Puerto Rico)??? on page 50.

(For Canada) To order accessories, call the dealer from whom you have made your purchase.

???1 Remote control (N2QAJC000015)

???1 Button-type battery for remote control

(for replacement D page 9)

???1 Audio/Video cable (K2KC4CB00026)

???1 AC adaptor (RFEA219W)

???1 AC power supply cord (K2CB2CB00020)

???For use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.

???1 Car DC Adaptor* (RFEC206P-Y)

???1 Headrest Mounting Bracket* (RXQ1706)

???1 Safety belt* (RFC0150-K)

???1 Rechargeable battery pack (DY-DB15)

???DY-DB15 is available as option.

???1 Cleaning cloth (RFE0215)

*For installation and handling methods, refer to the operating instructions ???Enjoying in a car???.

(Only for U.S.A. and Puerto Rico)

Please register via the Internet at:

http://www.prodreg.com/panasonic/

(ONLY FOR CANADA)

The enclosed Canadian French label sheet corresponds to the English display on the unit.

Unit and media care

Rotating the screen

When rotating the screen, rotate it after opening it to 90??as shown below. Rotating the screen without opening the angle enough or opened to 180?? may scratch the area around the screen and the main unit so take care.

1 Open the screen approximately 90??.

2 Rotate the screen slowly.

Applying excessive force when rotating the screen, or rotating the screen forcibly in the opposite direction to the rotating direction may cause malfunction.

???Caution

???Do not insert a finger between the screen and the main unit when rotating the screen. Doing so may result in fingers getting caught between the main unit and the screen and cause injuries. Especially keep an eye on children.

DO NOT

Holding the unit

Hold the unit with the stand closed.

???Caution

???Do not insert a finger between the main unit and the stand when installing or moving this unit. Doing so may result in fingers getting caught between the unit and the stand and cause injuries. Especially keep an eye on children.

Disc and card handling

???Clean discs

???To clean this unit, wipe with a soft, dry cloth.

???Wipe gently with the cleaning cloth (included).

???To remove stubborn dirt, wet the cleaning cloth, wring well, and then wipe. Afterwards, wipe gently with dry soft cloth.

???Maintenance of the lens

To dispose or transfer this unit

Media (Disc and card) information

Commercially sold discs

This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on the discs and/or packaging.

Note about using a DualDisc

???The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play may not be possible.

???Do not use a DualDisc in this unit as it may not be possible to insert it correctly and it may get scratched or scraped.

RQT9334

(ENG)

User recorded media

This chart shows the different type of discs recorded with other devices that you can use.

with the DVD recorder, etc. before playback. For details about finalizing, refer to the operating instructions for your equipment.

???It may not be possible to play the above discs in some cases due to the type of discs, the condition of the recording, the

recording method and how the files were created.

???When a disc recorded in the AVCHD format is being played, the video may be paused for a few seconds at portions spliced, due to deletion or editing.

SD cards

This chart shows the different type of cards recorded with other devices that you can use.

* Includes miniSD Card, microSD Card and microSDHC Card

The card types mentioned above will be referred to as ???SD card??? in these operating instructions.

???MiniSD Cards, microSD Cards and

???This unit is compatible with SD Memory Cards that meet SD Card Specifications FAT12 and FAT16 formats, as well as SDHC Memory Cards in FAT32 format.

???When using cards from 4 GB to 32 GB, only SD cards using the SDHC logo can be used.

???Useable memory is slightly less than the card capacity.

???If the SD card you are attempting to use was formatted on a PC, it is possible that the card may not work properly.

???Keep the Memory Card out of reach of children to prevent

swallowing.

???When a card recorded in the AVCHD format is being played, the video may momentarily pause, especially where one recording ends and the next one begins. This is normal and does not indicate a problem.

???To protect the card???s contents, move the record prevention tab (on the SD card) to ???LOCK???.

Discs that cannot be played in this unit

???BD-RE discs (with cartridge) ???2.6 GB and 5.2 GB DVD-RAM

???DVD-RAM that cannot be removed from cartridge ???3.95 GB and 4.7 GB DVD-R (Authoring)

???DVD-R, DVD-R DL, DVD-RW, +R, +R DL recorded on another unit and not finalized

???BD-Video with a region code other than ???A??? ???DVD-Video with a region number other than ???1??? or ???ALL??? ???Version 1.0 DVD-RW

???DVD-ROM, CD-ROM, CDV, CD-G, CVD, SACD, Photo CD, MV-Disc and PD

???DVD-Audio

???Video CD and SVCD ???WMA discs

???PAL Discs

???HD DVD

???BD-Video discs recorded at a rate of 50 fields/sec ???Any other disc that is not specifically supported

Getting started

RQT9334

(ENG)

Overview

The Unit

Instructions for operations are generally described using the remote control in these operating instructions.

Front View

1

2

3

4

5

Rear View

6

7

8

9

10

11

Side View

12

Bottom View

RQT9334

(ENG)

Top View

1 LCD screen

When the screen is opened

Disc lid

[OPEN]

2[CHARGE] indicator (> 11)

While recharging the battery pack, this indicator lights up.

3[??] indicator (> 11)

When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on.

4Remote control signal sensor (> 9)

5Speaker

6SD card slot (> 13)

7Audio/video input/output terminal (> 25)

8Headphone terminal [??] (3.5 mm stereo mini jack)

9HDMI AV OUT terminal (> 25)

10LAN terminal (> 28)

11Stand (> 10)

12Stopper wire (> 10)

13DC IN terminal (> 11)

14Turn the unit on and off (> 12)

15Switch the media to playback

It will switch every time it is pressed.

DISC SD NETWORK AUX

16Stop (> 15)

17Playback (> 14)

18Skip title numbers, etc. (> 15)

19Adjust the volume (> 14)

20Show the sub menu (> 18)

21Return to previous screen

22Selection/OK

Remote control

3

4

5

6 7 13

16

???Insert the button-type battery (included)

1 Pull out the holder.

Bottom

Pull out while pressing here

2 Insert the battery and return the holder.

_ facing up

Lithium battery: CR2025

([3, 4, 2, 1])

???To enter: Press [OK]

???Frame forward / Frame backward:

(While paused) press left or right ([2;][;1])

9Show the sub menu (> 18)

10Select title numbers, etc./Enter numbers (> 16) or characters (> 30)

11Switch the media to playback (> 14)

It will switch every time it is pressed.

DISC SD NETWORK AUX

12Adjust the volume (> 14)

13Show FUNCTIONS menu (> 12)

14Return to previous screen

15Show on-screen menu (> 23)

16Show status messages (> 16)

17Turn the unit off automatically (> 12)

18Change the screen settings (> 13)

???Range of use

Within 20 degrees angle either up or down

Remote control signal sensor

Within 30 degrees angle either left or right

Remote control transmitter

Within approx. 7 m (23 ft.) in front

Preparing the Power

Supply

Using the unit connected to the AC adaptor

The unit is in the standby condition (the [??] indicator lights) when the AC power supply cord is connected. The primary circuit is always ???live??? as long as the AC adaptor is connected to an electrical outlet.

???When connecting the AC adaptor, use the unit after setting it vertically. Placing the unit with the stand closed

(e.g.:D 10, 3 in ???Installation of the unit???) may cause damage to or malfunction with the AC adaptor.

To conserve power

This unit consumes 0.5 W (Approximately 5 W when Quick Start is set to ???On???) of power even when turned off. When the unit is not going to be used for a long time, disconnect the AC power supply cord from the household AC outlet.

Using the battery pack

This unit can be used in places without an AC outlet, such as outdoors, by attaching the included battery pack.

???The battery is not charged at the time of purchase. Charge before initial use.

???The battery is designed only for use with this unit. It cannot be used with other equipment.

???Attaching the battery pack

Turn the unit off before attaching or detaching the battery pack. ???Attach the battery after closing with the LCD screen facing

inwards and the stand open.

Bottom side of this unit

1 Bring in from the left, aligning the grooves.

2 Slide in to the right.

RELEASE

DETACHATTACH

Clicks into place.

Check to make sure it is securely fastened.

???Detaching the battery pack

Bottom side of this unit

2 Slide.

???Detach the battery pack (D above).

(Even when the unit is turned off, there is a small amount of voltage running through the unit, and this may result in a malfunction.)

???Recharge the battery for re-use.

???Recharging the battery pack

Attach the battery pack and connect the AC adaptor (> left).

???The [CHARGE] indicator lights while charging the battery, and the [CHARGE] indicator turns off when battery charging is finished.

[CHARGE] indicator (Yellow light)

???Approximate recharging and play times (Hours)

???The times indicated on the above may differ depending on use. ???To change the LCD brightness (> 13, ???Adjusting the pictures

on the LCD screen???).

???Checking the remaining battery charge

When the unit is on (> 12, ???Turning on/off the unit???) and powered by the battery pack

Press [SUB MENU] to check on the LCD (displays for a few seconds).

(screen)

RQT9334

(ENG)

Turning on/off the unit

Press [POWER ??] (approx. 0.5 sec.).

The unit is turned off when [POWER ??] is pressed again.

???If the screen is rotated when the unit is turned on, the display on the screen will disappear and the unit will be automatically turned off. (> 10)

???The unit cannot be turned on in situations other than the following or when the screen is rotated. (> 10)

???When the ???Auto Power Off??? is set to ???On??? (initially set to ???On???), the unit will be turned off automatically after 15 minutes

(5 minutes when the battery pack is used) when it is in stopped status (> 36).

???The startup will take time. The operation related to startup of the unit after turning on this unit can be quickened by setting the initial setup ???Quick Start??? (> 36) to ???On??? (initially set to ???Off???). (The power consumption will increase)

???You may hear operational sounds when the unit is turned on, but this is due to the initialization of the pickup unit, and it is not a malfunction.

Easy Setting

After installation of the unit and pressing [POWER ??], a screen for the basic settings will appear.

Follow the on-screen instructions and make the settings with [3, 4] and [OK].

???On-screen Language??? is set. (> 34)

???You can perform this setup anytime by selecting ???Easy Setting??? in the Setup menu. (> 36)

???You can also change this setting individually. (> 34)

Turn the unit off automatically

The unit is turned off automatically after set time has passed.

Switch by pressing the [OFF TIMER].

e.g., 30 min.

It will switch every time it is pressed.

Off 0:30 1:00 2:00 3:00 6:00 12:00

RQT9334

(ENG)

Showing FUNCTIONS menu

Some functions of this unit can be operated from the FUNCTIONS menu.

1 Press [FUNCTIONS].

???Functions displayed depend on the media and operating conditions.

???The FUNCTIONS menu cannot be displayed on the unit when selecting ???AUX??? with [AV SELECT].

When connecting to a TV (VIERA) with an HDMI cable, the unit???s FUNCTIONS menu can be displayed on the TV screen.

(> 27, ???Using the FUNCTIONS menu to operate this unit???)

2 Press [3, 4] to select the item and press [OK].

e.g.,

Blu-ray Disc Player

DISC

Playback

Other Functions

SD card

Network

AUX

OK

RETURN

???Playback (> 14, 30)

Show the Home screen of the VIERA CAST when selecting ???NETWORK??? with [AV SELECT].

???Top Menu (> 14) ???Menu (> 14, 18, 22) ???Viewing Picture (> 18) ???Other Functions

j???Playlists???:

You can play playlists created on DVD-VR.

Press [3, 4, 2, 1] to select the playlist and press [OK].

j???Setup??? (> 32)

j???Card Management??? (> 17)

Adjusting the pictures on the LCD screen

1 Press [LCD].

???It is also possible to display with the following procedures.

1 Press [SUB MENU].

2Select ???Other Functions??? with [3, 4], and select [OK].

3 Select ???LCD Menu??? with [3, 4], and select [OK].

???Underlined items are the factory presets.

???When selecting other settings than ???AUX??? with [AV SELECT]

Picture:Adjusting image quality

???Standard: Standard

???Dynamic: Picture with high contrast

???When selecting ???AUX??? with [AV SELECT] (> 25) PICTURE:Adjusting image quality

???STANDARD: Standard

???DYNAMIC: Picture with high contrast

???NIGHT: Picture suitable for viewing in dark places

???USER j BRIGHTNESS :j5 to 5 j COLOR :j5 to 5

MONITOR:Displaying images

???If you are not using the LCD on this unit, select ???Off (OFF)??? to conserve power. (The [??] indicator flashes.)

???If the settings in ???PICTURE??? are changed when ???AUX??? is selected, the settings in ???Picture??? will also change.

The settings will change in the same way even when something other than ???AUX??? is selected.

To exit the screen

Press [LCD] or [RETURN].

To display images when the ???Monitor (MONITOR)??? is set to ???Off (OFF)???

Press [LCD] or [SUB MENU]

Loading the disc or SD card

Label side up (Double-sided disc: place the label side up that you want to play back)

OPEN

Lens (> below)

1 Open the screen and press [OPEN].

2 Set the disc holding the unit with your hand and close the lid.

3 Close the screen.

???Some discs may start playing when it is loaded with the unit turned on.

???About discs with a cartridge

j BD-RE with a cartridge: It cannot be used with this unit. (It cannot be used even if the disc is taken out from the cartridge.)

j DVD-RAM, 8 cm disc: Remove the disc from the cartridge and set the disc in the tray

j Place the disc back into the cartridge for storage to prevent dirt and scratches after use.

SD card

Insert the card with the corner cut-side up.

Label side

1 Open the cover at the side of the unit. 2 Insert the SD card into the SD card slot.

???Press on the center of the card until it clicks into place.

3 Close the cover.

To remove the card

In step 2 above, press the center of the card until it ???clicks???, and pull the card out straight.

RQT9334

(ENG)

Basic play (Playing video contents)

Instructions for operations are generally described using the remote control in these operating instructions.

Preparation

Insert a disc or SD card (> 13).

Press [AV SELECT] to select ???DISC??? or ???SD???.

Play starts.

???If play does not start, press [1] (PLAY).

???If a media with data in different file formats is inserted, the file selection menu is displayed. Press [3, 4] to select the desired file format and press [OK].

???If the menu is displayed, press [3, 4, 2, 1] to select the item and press [OK].

???If the screen prompting you to use the color buttons appears, continue to operate with the color buttons on the remote control.

???DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [???] when you finish to preserve the unit???s motor.

Playing HD Video or SD Video

[AVCHD] [MPEG2]

It is possible to playback the HD (High Definition) video recorded on the Panasonic High definition Video Camera on the DVD-RAM/R/RW/R DL/+R/+RW/+R DL or SD card, and SD (Standard Definition) Video recorded on the Panasonic SD Video Camera on the SD card.

Preparation

Insert a disc or SD card (> 13).

1 Press [AV SELECT] to select ???DISC??? or ???SD???.

??????Video (AVCHD)??? or ???Video (MPEG-2)??? screen is displayed.

???If a media containing data in different file formats is inserted, the file selection menu may be displayed.

Press [3, 4] to select ???Play Video (AVCHD)??? or ???Play Video (MPEG-2)??? and press [OK].

e.g.,

SD Card

Play Pictures (JPEG)

Play Video (AVCHD)

Play Video (MPEG-2)

Select an action or press [RETURN].

SUB

OK

carefully.

???When playing a set of two or more BD-Video discs, the menu screen may continue to display even if the disc has been ejected.

???The start of playback may take time depending on the disc or SD card.

???The sound of rotation may be audible during disc playback, but this is not a malfunction.

To adjust the volume

Press [j VOL] or [i VOL].

???When using headphones, turn down the volume before connection.

To show menus

[BD-V] [AVCHD] ]DVD-VR] [DVD-V] [DivX]

Press [TOP MENU/DIRECT NAVIGATOR].

???Total title number may not be displayed properly on +R/+RW.

e.g., DVD-RAM

To show Pop-up menu

[BD-V]

The Pop-up menu is a special feature available with some BD- Video discs. This menu may vary with discs. For the operating method, refer to the instructions for the disc.

MENURETURN

2 Press [3, 4, 2, 1] to select the title and press [OK].

???Total title number may not be displayed properly on +R/ +RW.

To return to the menu screen

Press [DIRECT NAVIGATOR].

To exit the menu screen

Press [RETURN].

To switch from other menus to AVCHD or MPEG2 menu

(If the media contains data in different file formats) 1 Press [FUNCTIONS].

2 Press [3, 4] to select ???Menu??? and press [OK].

3Press [3, 4] to select ???Play Video (AVCHD)??? or ???Play Video (MPEG-2)??? and press [OK].

???It may pause for a few seconds on the break of images when editing such as partial deletion is performed.

???High definition video (transfer rate of 18 Mbps or faster) cannot be played back correctly if it was recorded on a DVD compatible to double speed or slower.

Chapter playback

4 Press [2, 1] to select the chapter and press [OK].

e.g.,

You are now in ??????Chapter View.?????? Please select the chapter you would like to start playback. Press [RETURN] for ??????Title View.??????

0:00.20

Page 001/001

Play

RETURN

Other operations during play

These functions may not work depending on the media.

Stop

The stopped position is memorized.

Resume play function

Pause

???Press [;] again or [1] (PLAY) to restart play.

Search/Slow-motion

The speed increases up to 5 steps.

???Press [1] (PLAY) to revert to normal playback speed. ???For some discs, the speed may not change.

Search

While playing, press [6] or [5].

???]DVD-VR] [DVD-V]:

Audio is heard during the first level of forward search.

???[BD-V] [AVCHD] [DivX] [MPEG2]: Audio is not heard during all levels of search.

???[CD] [MP3]: The speed is fixed to a single step.

Slow-motion

While paused, press [6] or [5].

???[BD-V] [AVCHD]: Forward direction [5] only.

???]DVD-VR]: If continued for approx. 5 minutes, slow-motion play pauses automatically.

Skip

Skip to the title, chapter or track you want to play.

???Each press increases the number of skips. ???[DivX]: Backward direction [:] only.

RQT9334

(ENG)

Basic play (Playing video contents)

(continued)

Direct Play

During playback, you can access specific recordings or scenes through direct entry of the numbered buttons.

Play starts from the selected title or chapter.

???While stopped (the image on the right is displayed on the screen), the title is designated. While playing, the chapter is designated.

Frame-by-frame

While paused, press [2] (2;) or [1] (;1).

Each press shows the next frame.

???Press and hold to change in forward or backward succession. ???Press [1] (PLAY) to revert to normal playback speed. ???[BD-V] [AVCHD] : Forward direction [1] (;1) only.

Status messages

The status messages give you information about what is currently being played. Each time you press [STATUS], the information displayed will change.

???It is also possible to display with the following procedures: 1 Press [SUB MENU].

2 Select ???Status??? with [3, 4], and select [OK].

Depending on the kind of disc or the playback status, this display may not appear.

Screen Aspect

When black bars are shown at the top, bottom, left, and right sides of the screen, you can enlarge the image to fill the screen.

1 Press [SUB MENU].

2 Press [3, 4] to select ???Other Functions??? and press [OK]. 3 Press [3, 4] to select ???Screen Aspect??? and press [OK]. 4 Press [2, 1] to select ???Side cut??? or ???Zoom???.

???Please note that the top, bottom and sides of the image will be cut off in images with no black bars.

???Screen aspect will return to ???Normal??? in the following instances: j Playback of images starts/ends

j The unit is turned on/off

???[BD-V] [DVD-V]: ???Side cut??? does not have any effect.

???When ???TV Aspect??? (> 34) is set to ???4:3 Pan & Scan??? or ???4:3 Letterbox???, the ???Zoom??? effect is disabled.

Changing audio during play

???It is also possible to display with the following procedures: 1 Press [SUB MENU].

2 Select ???Other Functions??? with [3, 4], and select [OK]. 3 Select ???Audio??? with [3, 4], and select [OK].

[BD-V] [DVD-V]

e.g., [DVD-V]

English is selected.

You can change the audio channel number each time you press [AUDIO] or [3, 4]. This allows you to change the soundtrack language (> 23, Soundtrack), etc.

DVD-RAM(VR)

Play

???AudioLR???

You can change soundtracks each time you press [AUDIO] or [OK].

Enjoying BD-Live or BONUSVIEW in BD-Video

[BD-V]

What is BONUSVIEW?

BONUSVIEW allows you to enjoy functions such as picture-in- picture or secondary audio etc., with BD-Video supporting BD- ROM Profile 1 version 1.1/ Final Standard Profile.

What is BD-Live?

In addition to the BONUSVIEW function, BD-Video supporting BD-ROM Profile 2 that has a network extension function allows you to enjoy more functions such as subtitles, exclusive images and online games by connecting this unit to the Internet. In order to use the Internet feature, you must have this unit connected to a broadband network (> 28).

???These discs may not be on sale in certain regions.

???The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.

Playing secondary video (picture- in-picture) and secondary audio

Secondary video

Primary video

To turn on/off secondary video

Set ???Video??? in ???Secondary Video??? to ???On??? or ???Off??? (> 23, Press [DISPLAY] > ???Disc??? > ???Signal Type???)

The secondary video is played.

To turn on/off secondary audio

Set ???Soundtrack??? in ???Secondary Video??? to ???On??? or ???Off??? (> 23, Press [DISPLAY] > ???Disc??? > ???Signal Type???)

The secondary audio is played.

???During search/slow-motion or frame-by-frame, only the primary video is displayed.

???When ???BD-Video Secondary Audio??? in ???Digital Audio Output??? is set to ???Off???, secondary audio will not be played even if you set ???Soundtrack??? in ???Secondary Video??? to ???On???. Please check that ???BD-Video Secondary Audio??? is set to ???On??? (> 33).

???The playback method determined by the disc will take priority, so it may not play back in the manner specified with this unit.

???When the secondary video is turned off, the secondary audio will not be played.

Enjoying BD-Live discs with Internet

Many BD-Live compatible discs require content to be downloaded onto an SD card (> 49, Local storage) in order to access the available BD-Live features.

???An SD card with 1 GB or more of free space (SD Speed Class Rating 2 or higher) needs to be inserted prior to inserting the BD-Live compatible disc.

Some BD-Live content available on the Blu-ray discs may require an Internet account to be created in order to access the BD-Live content. Follow the screen display or instruction manual of the disc for information on acquiring an account.

Preparation

???Connect to the network. (> 28)

???For operation method, refer to the instructions on the disc.

To use the above functions, it is recommended that you format the card on this unit. Format the card using the following procedures:

Formatting SD cards/Deleting data

???If the SD card you use is formatted, all data on the card will be erased. It cannot be recovered.

1 Insert an SD card (> 13).

2 Press [AV SELECT] to select ???SD???.

3 Press [FUNCTIONS]. 4 Press [3, 4] to select

???Other Functions??? and press [OK].

5 Press [3, 4] to select

???Card Management??? and press [OK].

6Press [3, 4] to select ???BD-Video Data Erase??? or ???Format SD Card??? and press [OK].

7 Press [2, 1] to select ???Yes??? and press [OK].

8 Press [2, 1] to select ???Start??? and press [OK].

???If you experience any problems, first, try formatting the SD card in this unit.

???A message may be displayed when the SD card doesn't have enough storage capacity for BD-Live content.

Please make space available on the current SD card, or insert another SD card.

???While using this feature, do not open the cover at the side of the unit or touch the SD card.

???While using this feature, do not remove the SD card. Doing so will cause playback to stop.

???The unit must be connected to the Internet and set up (> 28) to use the BD-Live functions. ???BD-Live Internet Access??? may

need to be changed for certain discs (> 32).

???When discs supporting BD-Live are played back, the player or disc IDs may be sent to the content provider via the Internet. You can restrict Internet access (> 32).

???The playback may be paused depending on the communication environment. Some functions may be disabled to prevent skipping to sections that have not been downloaded, etc.

RQT9334

(ENG)

Playing still pictures

[JPEG]

Playback of the BD-RE, DVD-RAM/R/R DL or CD-R/RW with still pictures recorded. This unit can also play still pictures recorded on the SD card.

(About structure of folders D 39, ???Structure of folders that can be played in this unit???)

Preparation

Insert a disc or SD card (> 13).

1 Press [AV SELECT] to select ???DISC??? or ???SD???.

???BD-RE, DVD-RAM

???Album View??? screen is displayed.

???When the ???Title View??? screen is displayed, press the [G] button to switch to the ???Album View??? screen.

???If the DVD-RAM containing both JPEG and AVCHD format is inserted, the file selection menu may be displayed.

???DVD-R/R DL, CD-R/RW, SD card

???If the media containing data in different file formats is inserted, the file selection menu may be displayed.

Press [3, 4] to select ???Play Pictures (JPEG)??? and press [OK].

e.g.,

SD Card

Play Pictures (JPEG)

Play Video (AVCHD)

Play Video (MPEG-2)

Select an action or press [RETURN].

To switch from other menus to JPEG menu

(If the media contains data in different file formats) 1 Press [FUNCTIONS].

2 Press [3, 4] to select ???Menu??? and press [OK].

3Press [3, 4] to select ???Play Pictures (JPEG)??? and press [OK].

Useful functions during still picture play

Start Slideshow

You can display still pictures one by one at a constant interval.

???BD-RE, DVD-RAM

1 While the ???Album View??? screen is displayed

Press [3, 4, 2, 1] to select the album and press [SUB MENU].

???You can also start slideshow by pressing [1] (PLAY) after selecting the album.

2 Press [3, 4] to select ???Start Slideshow??? and press [OK].

???DVD-R/R DL, CD-R/RW, SD card

1 While the ???Picture View??? screen is displayed

SUB

OK

MENURETURN

???Picture View??? screen is displayed. B Go to step 3

2 Press [3, 4, 2, 1] to select the album and press [OK].

e.g.,

3 Press [3, 4, 2, 1] to select the still

picture and press [OK]. e.g.,

0009

Page 001/001

SUB Play

MENU RETURN

???Press [2, 1] to display the previous or next still picture. ???Press [:, 9] to show other pages.

???Playback is not possible for pictures other than JPEGs. ???Black bars may be displayed on the top, bottom or sides

depending on the picture aspect ratio.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [SUB MENU].

2 Press [3, 4] to select ???Start Slideshow??? and press [OK].

To stop slideshow

Press [???].

Slideshow settings

In step 2 in Start Slideshow (D above)

1 Press [3, 4] to select ???Slideshow Settings??? and press [OK].

2 To change the display interval

Press [3, 4] to select ???Display Interval??? and press [2, 1] to select the interval (???Long???, ???Normal??? or ???Short???). ???When a still picture with a large number of pixels is

played, the display interval may become longer. Even if the setting is changed, the display interval may not become shorter.

To set display method

Press [3, 4] to select ???Transition Effect??? and press [2, 1] to select ???Fade???, ???Motion??? and ???Random???.

To repeat slideshow

Press [3, 4] to select ???Repeat Play??? and press [2, 1] to select ???On??? or ???Off???.

To listen to a Background Music (SD card only)

The music CD can be played back as Background Music during the slideshow.

Press [3, 4] to select ???Soundtrack??? and press [2, 1] to select ???On??? or ???Off???.

???You cannot search or skip the music.

???When the slideshow stops, the playback of the music also stops.

3 Press [3, 4, 2, 1] to select ???Set??? and press [OK].

Rotate

1 While playing (except for slideshow)

Press [SUB MENU].

2 Press [3, 4] to select ???Rotate Right??? or ???Rotate Left??? and press [OK].

???The rotation information will be stored until the unit is turned off or the media is removed.

Zoom out

This function is only available for small-sized still pictures.

1 While playing (except for slideshow)

Press [SUB MENU].

2 Press [3, 4] to select ???Zoom out??? and press [OK].

???To cancel ???Zoom out???, press [3, 4] to select ???Zoom in??? in step 2 and press [OK].

???The zoom-out information will not be stored.

???DVD-R/R DL, CD-R/RW

1 While the ???Picture View??? screen is displayed

Press [SUB MENU].

2 Press [3, 4] to select ???Select Folder??? and press [OK].

3 Press [3, 4] to select a folder and press [OK].

To show the picture properties

While playing

Press [STATUS] twice.

???It is also possible to display with the following procedures: 1 Press [SUB MENU].

2 Select ???Status??? with [3, 4], and select [OK]. e.g., JPEG on DVD-RAM

Shooting date

Photo 11/12/2009 Total 3/9

To exit, press [STATUS].

Playing DivX?? videos

[DivX]

ABOUT DIVX VIDEO:

DivX?? is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video.

You can play DVD-R/R DL and CD-R/RW discs which contain DivX video contents that have been recorded on a personal computer.

(About structure of folders D 39, ???Structure of folders that can be played in this unit???)

???Because DivX format can use many different codecs, there is no guarantee that all DivX files will play. (> 38, ???About MP3/JPEG/DivX files???)

Preparation

Insert a disc (> 13).

1 Press [AV SELECT] to select ???DISC???.

???If the media containing data in different file formats is inserted, the file selection menu may be displayed. Press [3, 4] to select ???Play Video (DivX)??? and press [OK].

e.g.,

CD

Play Video (DivX)

Play Pictures (JPEG)

Play Music (MP3)

Select an action or press [RETURN].

???You cannot select folders that contain no compatible files.

To return to the previous screen

Press [RETURN].

Regarding DivX VOD content

ABOUT DIVX VIDEO-ON-DEMAND:

SUB

OK

??

MENURETURN

2 Press [3, 4] to select the title and press [OK].

Play starts on the selected title.

e.g.,

DIRECT NAVIGATOR

CD (DivX)

???The picture sizes set for recording may prevent the unit from showing pictures in the proper aspect. You may be able to adjust the aspect through the TV.

???Successive play is not possible.

???You can use search and skip functions. (> 15) ???Press [:, 9] to show other pages.

To switch from other menus to DivX menu

(If the media contains data in different file formats) 1 Press [FUNCTIONS].

2 Press [3, 4] to select ???Menu??? and press [OK].

3 Press [3, 4] to select ???Play Video (DivX)??? and press [OK].

This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content.

First generate the DivX VOD registration code for your device and submit it during the registration process.

[Important: DivX VOD content is protected by a DivX DRM (Digital Rights Management) system that restricts playback to registered DivX Certified devices. If you try to play DivX VOD content not authorized for your device, the message ???Authorization Error.??? will be displayed and your content will not play.] Learn more at www.divx.com/vod.

Display the unit???s registration code.

(> 36, ???DivX Registration??? in ???Others???)

DivX Registration

DivX?? Video On Demand

Your registration code is : XXXXXXXX 8 alphanumeric characters

To learn more visit www.divx.com/vod

???After playing DivX VOD content for the first time, another registration code is then displayed in ???DivX Registration???. Do not use this registration code to purchase DivX VOD content. If you use this code to purchase DivX VOD content, and then play the content on this unit, you will no longer be able to play any content that you purchased using the previous code.

???If you purchase DivX VOD content using a registration code different from this unit???s code, you will not be able to play this content. (???Authorization Error.??? is displayed.)

Regarding DivX VOD content that can only be played a set number of times

Some DivX VOD content can only be played a set number of times. When you play this content, the remaining number of plays is displayed. You cannot play this content when the number of remaining plays is zero. (???Rental Expired.??? is displayed.)

The remaining number of plays decreases each time a program is played. However, when playing from the point where play was previously stopped, the remaining number of plays does not decrease due to the resume play function.

Displaying subtitles text

You can display subtitles text onto the DivX video disc on this unit.

This function has no relation to the subtitles specified in DivX standard specifications and has no clear standard. The operation might be different or it may not operate properly depending on the way the file was made or the state of this unit (playing, stopped, etc.).

1 While playing

Press [DISPLAY].

2 Press [3, 4] to select ???Disc??? and press [1].

3 Press [3, 4] to select ???Subtitle??? and press [1].

4 Press [3, 4] to select ???On??? and press [1]. 5 Press [3, 4] to select ???Text???.

???DivX video files that do not display ???Text??? do not contain subtitles text.

Subtitles text cannot be displayed.

To exit the screen

Press [DISPLAY].

???If the subtitles text are not displayed correctly, try changing the language settings. (> 32)

Playback

RQT9334

(ENG)

SUB

OK

MENURETURN

2 Press [3, 4] to select the track and press [OK].

Play starts on the selected track.

???Playback for some discs may start automatically. e.g., [CD]

??? ??? indicates the track currently playing.

???You can use search and skip functions. (> 15)

???When the television is connected and the ???Screen Saver Function??? is set to ???On??? (> 34), the screen switches to Screen Saver mode if there is no operation for 10 minutes after starting playback. (Playback continues.)

Playing music continuously even after turning off power to the television

When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 or later and other device supports VIERA Link, the unit is turned off if the power to the television is turned off, since ???Power off link??? (> 26) operates.

The following operations make it possible to keep the power of the unit ON and to play music continuously.

1While playing music Press [SUB MENU].

2 Press [3, 4] to select ???TV Power??? and press [OK].

???Sound may be discontinued for several seconds when the power to the television is turned off.

???If the operation mentioned above is executed while audio is output from the television, the sound may not be output from the device. It is recommended to set the device beforehand so that audio will be output from the device.

RQT9334

(ENG)

???You cannot select folders that contain no compatible tracks.

To return to the previous screen

Press [RETURN].

Changing settings with the on-screen menu

On-screen menu operations

1 Press [DISPLAY].

???It is also possible to display with the following procedures: 1 Press [SUB MENU].

2 Select ???Other Functions??? with [3, 4], and select [OK].

3 Select ???Settings for Playback??? with [3, 4], and select [OK]. e.g., BD-Video

???Depending on the condition of the unit (playing, stopped, etc.) and media contents, there may be some items that you cannot select or change.

2 Press [3, 4] to select the menu and press [1].

3 Press [3, 4] to select the item and press [1].

4 Press [3, 4] to select the setting.

???Some items can be changed by pressing [OK].

To exit the on-screen menu

Press [DISPLAY].

What you can change with the on-screen menu

???Disc menu

Signal Type

[BD-V]

??? Primary Video

??? Secondary Video

Video

[AVCHD]

The original video recording method appears. (D right, Video attribute)

Soundtrack

[AVCHD] [DVD-V]

Select the type of audio or language. (D below, Language, Audio attribute)

]DVD-VR] [MPEG2]

The audio attributes appear. (D below, Audio attribute)

[DivX]

Select the soundtrack number.

???Soundtrack numbers are displayed even when there is only one audio type.

Subtitle

???Subtitle number is displayed even if there are not multiple subtitles.

Subtitle Style

[BD-V]

Select the subtitle style.

Audio channel

]DVD-VR] [DivX] [MPEG2]

(> 16, Changing audio during play)

Angle

[BD-V] [DVD-V]

Select the number of the angle.

Some items may be changed only on the disc specific menu. (> 14)

Language

Audio attribute

Changing settings with the on-screen

menu (continued)

???Play menu

Repeat Play

(Only when the elapsed time is being displayed on the unit???s display.)

Select the item which you want to repeat. The items displayed differ depending on the type of media.

Select ???Off??? to cancel.

Random

[CD] [MP3]

While playing, press [3, 4] to select ???On???.

Random playback starts from the next track.

???Video menu

Picture

[BD-V] [AVCHD] ]DVD-VR] [DVD-V] [DivX] [MPEG2]

Select the picture quality mode during play.

1 Press [1] to select ???Picture Adjustment??? and press [OK]. 2 Select the item using [3, 4] and adjust it with [2, 1].

Progressive

Select the method of conversion for progressive output to suit the type of material being played (> 48, Film and video).

24p

[DVD-V]

Only when you have selected ???On??? in ???24p Output??? (> 34)

???Audio menu

Dialog Enhancer

[BD-V] [AVCHD] ]DVD-VR] [DVD-V] [DivX] [MPEG2] (3 channels or more only, including a center channel)

The volume of the center channel is raised to make dialog easier to hear.

This function is effective for audio from the HDMI AV OUT terminal only when ???Dolby D/Dolby D +/Dolby TrueHD??? or ???DTS/DTS-HD??? is set to ???PCM???.

Using this unit with other equipment

It is possible to enjoy the video and audio of this unit on the TV and amplifier, or to enjoy the video from other video devices on the LCD screen of this unit.

???Turn off all equipment before connecting and read the appropriate operating instructions.

???Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly.

Connection with the HDMI cable

It is possible to enjoy the high quality video and audio of this unit on the large screen by connecting this unit with the TV using a single cable.

???Linked operation is possible by connecting to a Panasonic TV (VIERA) or amplifier that is compatible with the VIERA Link (HDMI) function. (> 26)

???Non-HDMI-compliant cables cannot be utilized. ???Please use High Speed HDMI Cables that have the HDMI

logo (as shown on the cover). It is recommended that you use Panasonic???s HDMI cable. When outputting 1080/24p signal (> 34, ???HDMI Resolution???), please use HDMI cables 5.0 meters (16.4 ft.) or less.

Recommended part number:

RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20 (2.0 m/6.6 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc.

???This unit incorporates HDMI (x.v.ColorTM, High Bit rate Audio) technology. (> 49)

Preparation

Connect the devices to the unit.

AVVOUT??????

Connection with the Audio/Video cable

Enjoy video and audio on other devices

Preparation

Connect a TV or a projector to this unit.

AV

IN/OUT

*The video input (yellow) plug on the Audio/Video cable (included) is not used when connecting to an amplifier or similar.

1 Turn on the power of the connected device, and switch the input.

Example: Set the input to ???Video 2??? or similar (the name of input may be different depending on the connected device).

2 Start playback on this unit.

Enjoy video and audio from other devices on this unit

Preparation

Connect the video device to this unit.

AV

IN/OUT

Playback

Connection

HDMI IN

You can enjoy the high quality surround audio in Dolby Digital Plus, Dolby TrueHD, and DTS-HD by connecting this unit to the HDMI compatible multi-channel amplifier. (> 37) (Only when connected to an amplifier compatible with each audio)

1 Turn on the power of the connected device (TV, etc.), and switch the input.

Example: Set the input to ???HDMI??? or similar (the name of input may be different depending on the connected device).

2 Start playback on this unit.

Video and audio are output from the connected device.

???The quality of video will lower on the screen of this unit when HDMI is connected, but it is not a malfunction.

Audio/Video cable

(included)

Press [AV SELECT] to switch to ???AUX???.

???Operate playback using the connected equipment. (Please read the operating instructions for the connected equipment)

???The unit does not turn off automatically even when ???Auto Power Off??? is set to ???On??? (> 36). Turn the unit off when you have finished using it.

???To adjust the pictures on the LCD screen (> 13)

???Audio/Video cable (included) is designed only for use with this unit. Video and audio may not playback correctly if it is used with other equipment.

???If you raise the volume on the television while playing this unit, the volume may abruptly become very loud when you switch to a television broadcast. Return the volume to its normal level before changing.

RQT9334

(ENG)

25

Linked operations with the TV

(VIERA LinkTM ???HDAVI ControlTM???)

What is VIERA Link ???HDAVI Control????

VIERA LinkTM is a new name for EZ SyncTM.

VIERA Link ???HDAVI Control??? is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or amplifier/receiver under ???HDAVI Control???.

You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.

???VIERA Link ???HDAVI Control???, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers??? equipment that supports HDMI CEC cannot be guaranteed.

???This unit supports ???HDAVI Control 4??? function.

???HDAVI Control 4??? is the newest standard (current as of December, 2008) for Panasonic???s HDAVI Control compatible equipment. This standard is compatible with Panasonic???s conventional HDAVI equipment.

???Please refer to individual manuals for other manufacturers??? equipment supporting VIERA Link function.

Preparation

1Connect this unit to your TV or amplifier/receiver with an HDMI cable (> 25).

2Set ???VIERA Link??? to ???On??? (> 34). (The default setting is ???On???.)

3 Set the ???HDAVI Control??? operations on the connected equipment (e.g., TV).

4Turn on all ???HDAVI Control??? compatible equipment and select this unit???s input channel on the connected TV so that the ???HDAVI Control??? function works properly.

Also when the connection or settings are changed, repeat this procedure.

When you want to leave the TV on and set only this unit to standby mode

Press [POWER ??] on this unit???s remote control and set to standby mode.

RQT9334

(ENG)

Automatic input switching

When the following operations are performed, the television will automatically switch the input channel and display the corresponding action.

jWhen play starts on the unit

jWhen an action that uses the display screen is performed (e.g., Direct Navigator screen)

jWhen the HDMI is connected, with the unit turned on (first time only)

Power on link

When the television is off and the following operations are performed, the television will automatically turn on and display the corresponding action.

jWhen play starts on the unit

jWhen an action that uses the display screen is performed (e.g., Direct Navigator screen)

Power off link

All connected equipment compatible with ???HDAVI Control???, including this unit, automatically turns off when you switch the television off.

???This unit automatically turns off even during playback or any other operation.

???When [1] (PLAY) is pressed on this unit for ???Automatic input switching??? or ???Power on link???, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents from where playback started. In this case, press [:] or [6] to go back to where playback started.

Playing music continuously even after turning off power to the television (> 22)

When not using ???HDAVI Control???

Set ???VIERA Link??? in the Setup menu to ???Off???. (> 34)

Easy control only with VIERA remote control

If you connect this unit to the TV that supports ???HDAVI Control 2??? or later with an HDMI cable, you can enjoy using more convenient functions.

You can operate this unit using buttons on the TV remote control.

The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV. Use the remote control supplied with this unit if you cannot operate this unit using buttons on the TV remote control.

???The operation of this unit may be interrupted when you press incompatible buttons on the TV remote control.

Using the FUNCTIONS menu to operate this unit

By using the TV remote control, you can play media using the FUNCTIONS menu.

1 Press the button for VIERA Link on the remote control.

2 Select the player.

???The FUNCTIONS menu is displayed.

e.g.,

Blu-ray Disc Player

DISC

Playback

Other Functions

SD card

Network

AUX

OK

RETURN

When the AC adaptor is connected while the unit is turned off and the unit is closed with the screen facing outward (> 10, 3 or 4in ???Installation of the unit???), the unit will automatically turn on. For details, please refer to the TV user manual.

???When the unit???s AC adaptor is connected, the unit will turn on with the above operations.

Using the sub menu to operate this unit

By using the TV remote control, you can play discs using the ???Control Panel??? and display the Top Menu (for BD-Video and DVD-Video) or Pop-up Menu (for BD-Video).

1 Press [SUB MENU].

???This can also be displayed by using the VIERA menu screen. ???You cannot use the sub menu while the Top Menu for

BD-Video or DVD-Video is displayed.

2 Select an item, then press [OK]. e.g.,

Broadband network connection

The following services can be used when this unit is connected to the internet via a broadband connection.

???Firmware can be updated (> 31) ???You can enjoy the BD-Live (> 17) ???You can enjoy the VIERA CAST (> 30)

LAN (10/100)

Straight LAN cable

(not included)

Telecommunications equipment (modem, etc.)

Broadband router, etc.

???Use shielded LAN cables when connecting to peripheral devices.

???With installation where your broadband modem is connected directly to your PC, a router must be installed.

???Use a router that supports 10BASE-T/100BASE-TX.

???In case all available connection on your router is being used, a hub or switch can be installed to provide additional connections.

???When operating the VIERA CAST, use high-speed internet service no less than 1.5 Mbps for SD (Standard Definition) and 6 Mbps for HD (High Definition) picture quality by your local broadband company.

jIf using slow Internet connection, the video may not be displayed correctly.

???Depending on a contract with your local broadband company, it may be generating communication charges.

???After physically connecting this unit to your broadband connection, some configuration is required. (D right)

???Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

RQT9334

(ENG)

Network settings

These settings are used if you connect this unit to the Internet.

???The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. (> 29)

It is required that you use a broadband connection.

Preparation

???Connect to a broadband network. (D left)

Testing of ???IP Address/DNS

Settings???

Always test the connection when a LAN cable is connected.

1 Press [SETUP].

2 Press [3, 4] to select ???Network??? and press [OK].

3 Press [3, 4] to select ???IP Address/DNS Settings??? and press [OK].

4 Press [3, 4] to select ???Connection Test??? and press [OK].

???Testing???: The test is in progress.

???Pass???: The connection is completed. Press [RETURN] to exit.

???Fail???: Please check the connection and settings. (> 29)

???Perform the ???Connection Test??? also when any change was made to the ???IP Address/DNS Settings???.

???If the connection test fails, it may be necessary to set the MAC address of this unit at the router side. The MAC address can be displayed by pressing [SETUP] and selecting ???Network???.

Network

IP Address/DNS Settings

Proxy Server Settings

Network Service

MAC Address: xx-xx-xx-xx-xx-xx

OK

RETURN

Setting the IP address

In most cases, default settings can normally be used without making any changes.

Set the IP address only when the router has no DHCP server functions or when the router???s DHCP server function is disabled.

After performing steps 1 ??? 3 (> 28)

4 Press [3, 4] to select ???IP Address Auto Configuration (DHCP)??? and press [2, 1] to select ???Off???.

???Generally leave ???On??? selected.

???When ???Off??? is selected, ???DNS Auto Configuration (DHCP)??? (> below) is also automatically ???Off???.

5 Press [3, 4] to select ???IP Address???, ???Subnet Mask??? or ???Default Gateway??? and press [OK].

6 Enter numbers with the numbered buttons and press [OK].

???If a wrong number is entered, then press [CANCEL].

7 Press [2, 1] to select ???Yes??? and press [OK].

???After checking the specifications for your broadband router, enter each number. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable. Assign a different number from those of other devices for the ???IP Address??? and the same number for others.

???The numeric input range is between 0 and 255.

Setting the DNS-IP

In most cases, default settings can normally be used without making any changes.

When setting an assigned DNS server from your Internet service provider, perform the following settings.

After performing steps 1 ??? 3 (> 28)

4 Press [3, 4] to select ???DNS Auto Configuration (DHCP)??? and press [2, 1] to select ???Off???.

5 Press [3, 4] to select ???Primary DNS??? or ???Secondary DNS???and press [OK].

6 Enter numbers with the numbered buttons and press [OK].

Primary DNS

Please input Primary DNS and press

[OK]. Press [CANCEL] to delete the selected character. To clear this setting, delete all characters and press [OK].

???If a wrong number is entered, then press [CANCEL].

7 Press [2, 1] to select ???Yes??? and press [OK].

???Follow the instructions given by your Internet service provider and enter the numbers. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable and assign the same number.

???The numeric input range is between 0 and 255.

Setting the connection speed

When the connection test results in ???Fail??? after the IP and DNS- IP addresses are assigned, perform the following settings.

After performing steps 1 ??? 3 (> 28)

4 Press [3, 4] to select ???Auto Detect Connection Speed??? and press [2, 1] to select ???Off???.

5 Press [3, 4] to select ???Connection Speed Setting??? and press [2, 1] to select a connection speed.

???Select a connection speed in accordance with the environment of the network connected.

???When the settings are changed, the network connection may be slower or disabled depending on the device.

Testing of ???Proxy Server Settings???

Always test the connection when new ???Proxy Server Settings??? have been made.

1 Press [SETUP].

2 Press [3, 4] to select ???Network??? and press [OK].

3 Press [3, 4] to select ???Proxy Server Settings??? and press [OK].

4 Press [3, 4] to select ???Connection Test??? and press [OK].

Setting the proxy server

In most cases, default settings can normally be used without making any changes.

Please use this setting when instructed to by your Internet service provider.

After performing steps 1 ??? 3 (D above)

4 Press [3, 4] to select ???Proxy Address??? and press [OK].

Proxy Server Settings

OK

RETURN

Network

Network settings (continued)

5 Press [3, 4, 2, 1] to select a character and press [OK].

Text field: shows the text you have entered

Using the numbered buttons to enter characters

e.g., entering the letter ???F???

1 1 2 3 4

2 A B C

3 D E F

4 G H I

1 Press [3] to move to the 3rd row.

2 Press [3] twice to highlight ???F???.

3 Press [OK].

Repeat this step to enter other characters. ???Press [;] to delete.

6 Press [???] when you complete the entry.

7 Press [3, 4] to select ???Proxy Port Number??? and press [OK].

8 Enter numbers with the numbered buttons and press [OK].

Proxy Port Number

Please input Proxy Server Port Number and press [OK]. Press [CANCEL] to delete the selected character. The number will be set to

Enjoying VIERA CASTTM

You can access a selection of Internet services from the Home screen with VIERA CAST, for example YouTube, Picasa Web Albums. (Current as of March 2009)

???VIERA CAST requires a broadband Internet connection. Dial- up Internet connections cannot be used.

Preparation

???Network connection (> 28) ???Network setting (> 28)

1 Press [VIERA CAST].

???Message is displayed. Please read these instructions carefully and then press [OK] to start VIERA CAST function.

Welcome to Network Service

Your Panasonic Network Service allows you to access web-based content on your Player/Recorder. Some web content may be inappropriate for some viewers. You may disable the Network Service feature by following the instructions found in your Operating Instructions.

Some web content may only be available from within select countries and may be presented in languages different than the one selected in your On-screen Language settings menu.

It's recommanded your player/recorder is connected to Full HD display with HDMI. The display of the contents may be truncated, depending on your TV. You may reduce to screen size by following the instructions found in your Operating Instructions.

Don???t show this message again

ENTER

Images are for illustration purposes, message may change without notice.

2 Press [3, 4, 2, 1] to select the item and press [OK].

???You can operate VIERA CAST using the following buttons on the unit???s remote control:

[3, 4, 2, 1], [OK], [RETURN], colored buttons and numbered buttons

???To access more features on YouTube or Picasa Web Albums site, enter your user ID and password that you have previously set up with these sites through the Internet on your PC. However, not all features may be accessible through VIERA CAST.

VIERA CAST Home screen;

"0" if all characters are deleted and [OK] is pressed.

0

0 - 9 Number

9 Press [2, 1] to select ???Yes??? and press [OK].

???The specified ports may be blocked and not be able to be used depending on the network environment.

After you access YouTube or Picasa Web Albums from the VIERA CAST Home screen and add your favorite videos or albums to VIERA CAST, you can choose them easily from the Home screen.

In order to restore the default settings

After performing steps 1 ??? 3 (> 29)

1Press [3, 4] to select ???Reset to factory preset??? and press [OK].

2 Press [2, 1] to select ???Yes??? and press [OK].

RQT9334

(ENG)

Images are for illustration purpose, contents may change without notice.

Regarding ???Settings???

Set VIERA CAST Home screen.

???My Account: You can remove your account from the unit.

???Lock: Password can be used to lock YouTube and Picasa Web Albums.

???Notices

???Depending on the usage conditions, it may take a while to load the page.

???The connection to the Internet may take time or the Internet may not be connected depending on the connection environment.

To return to VIERA CAST Home screen

Press [VIERA CAST].

To exit from VIERA CAST

???Press [FUNCTIONS], then press [RETURN] to cancel the menu.

???Set the ???Network Lock??? to ???On??? to restrict using VIERA CAST. (> 35)

???If the audio is distorted while using the VIERA CAST feature

set the ???Audio Auto Gain Control??? to ???Off??? (> 35)

???When the entire picture cannot be displayed on the screen, set the ???Reduce to Screen Size??? to ???On???. (> 35)

???Set the ???On-screen Language???, to switch the language for Home screen. (> 34)

???Set the ???Time Zone??? or ???DST??? when wrong time is displayed on the screen. (> 35)

???VIERA CASTTM home screen is subject to change without notice.

???The services through VIERA CASTTM are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.

???All features of websites or content of the service may not be available.

???Some content may be inappropriate for some viewers. ???Some content may only be available for specific countries

and may be presented in specific languages.

Firmware updates

Occasionally, Panasonic releases firmware updates for this Portable BD player. Firmware is embedded software that controls this unit???s microprocessor. These updates may add or improve a feature of this unit. Firmware updates may also be released to correct operating irregularities that are discovered with certain movies. These updates are available at no charge.

Automatically check the firmware

???Only when connecting the AC adaptor

This unit is capable of auto firmware check if it is connected to the Internet via a broadband connection.

When latest firmware version is available, the following screen is displayed:

Firmware Update

The latest firmware is available. Latest Online Version: x.x Current Installed Version: x.x

Do you want to start firmware update?

For the update information, please visit the following website: http://panasonic.net/support/

Press [2, 1] to select ???Yes??? and press [OK].

Follow the on-screen instructions to proceed.

After the latest firmware is downloaded, the firmware will be updated.

???If ???No??? is selected, then manually update the firmware later. (D right)

After the firmware is updated and the system is restarted, the following screen indicates that the firmware update has been completed.

The firmware was updated.

Current Installed Version: x.x

OK

RETURN

???Other operations are not possible during firmware updates. Additionally, do not perform the following operations as they may damage the unit:

j Turn the unit off

j Remove the AC power supply cord from the household AC outlet

j Open the disc lid

???Downloading will require several minutes. It may take longer or the Internet may not be connected depending on the

connection environment. It is required that you use a broadband connection.

???When the unit is connected to the Internet, communication charges may be generated.

???If you do not want to check for the latest firmware version when the unit is turned on, set ???Automatic Update Check??? to ???Off???. (> 36)

???If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware. http://panasonic.net/support/

(This site is in English only.)

Manually updating the firmware

RQT9334

(ENG)

1

2 Press [3, 4] to select the menu and press [OK]. 3 Press [3, 4] to select the item and press [OK].

If there are any other items, repeat these steps.

4 Press [3, 4, 2, 1] to select the option and press [OK].

Setup

Disc

Video

Audio

Display

TV Aspect/HDMI Function Settings

Network

Others

OK

RETURN

To return to the previous screen

Press [RETURN].

To exit the screen

Press [SETUP].

???Setup menu is also possible to display with the following procedures. 1 While stopped, press [SUB MENU]

2 Select ???Other Functions??? with [3, 4], and select [OK] 3 Select ???Setup??? with [3, 4], and select [OK]

RQT9334

(ENG)

Summary of settings

Underlined items are the factory presets.

???Disc???

Downmix

Switch the downmix system for playing back multi-channel surround sound.

???When ???Dolby D/Dolby D +/Dolby TrueHD??? or ???DTS/DTS-HD??? is set to ???Bitstream???, there are no downmix effects for the outputted audio.

???The audio will be outputted in ???Stereo??? in the following cases:

jAVCHD playback

jPlayback of button click sound on the menu and audio with secondary video in picture-in-picture mode

???Stereo:When connected to equipment that does not support the virtual surround function.

???Surround encoded:When connected to equipment that supports the virtual surround function (to convert 2-channel to multi channel surround).

Settings

Enjoying High Bit rate Audio of BD-Video

[BD-V]

This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video. In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given above)

NECESSARY CONNECTIONS

???HDMI AV OUT terminal: (> 25)

NECESSARY SETTINGS

???Set ???BD-Video Secondary Audio??? to ???Off???. (> 33) ???Set ???HDMI Audio Output??? to ???On???. (> 34)

???HDMI AV OUT terminal: Set ???Dolby D/Dolby D +/Dolby TrueHD??? or ???DTS/DTS-HD??? to ???Bitstream??? or ???PCM???. (> 33)

???The button click sound on the menu and audio with secondary video in picture-in-picture mode (> 17) is not output.

Regarding 24p output

[BD-V]

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in 60 frames/second in accordance with the display format. These can be output in 24p as the original. Therefore, high- quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.

Settings

Reference

About MP3/JPEG/DivX files

MP3

File format MP3

Playable CD-R*1, CD-RW*1, DVD-R*1,, DVD-R DL*1 media

Extension Files must have the extension ???.mp3??? or ???.MP3???.

Compression 32 kbps to 320 kbps rate

Sampling 44.1 kHz/48 kHz rate

Reference ID3 tags: version 1, 2.2, 2.3, 2.4

ID3 is a tag embedded in MP3 track to provide information about the track.

This unit supports the versions listed above but only titles and the names of artists can be displayed.

???If there is a large amount of still picture data etc. within a MP3 file, play may not be possible.

JPEG

DivX

RQT9334

(ENG)

38

Reference ???Certified to the DivX Home Theater Profile.

Video

jNumber of stream: Up to 1

jCodec: DIV3, DIV4, DIVX, DV50, DIV6

jFPS (Frame Per Second): Up to 30 fps

Audio

jNumber of stream: Up to 8

jFormat: MP3, MPEG, Dolby Digital

jMulti channel: Dolby Digital is possible. MPEG multi is 2 ch conversion.

???GMC (Global Motion Compensation) is not supported.

???Picture may stop if the DivX files are greater than 2 GB.

Subtitles text file of DivX

Playable CD-R*1, CD-RW*1, DVD-R*1, DVD-R DL*1 media

File format MicroDVD, SubRip, or TMPlayer

Extension Files must have the extension ???.SRT???, ???.srt???, ???.SUB???, ???.sub???, ???.TXT???, or ???.txt???

Reference ???The DivX video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions.

???If there are more than one subtitles text files inside the same folder, they are displayed in the following order of priority: ???.srt???, ???.sub???, ???.txt???.

???In the following situations, the subtitles cannot be displayed as recorded. Furthermore, depending on the methods used to create the file or the state of the recording, only parts of the subtitles may be displayed, or the subtitles may not be displayed at all.

j When special text or characters are included in the subtitles text.

j When the file size is larger than 256 KB. j When characters with specified styling

are included in the subtitle data.

j Codes that specify the character style within files are displayed as subtitle characters.

j When data with a different format exists within the subtitle data.

???If the file name of the DivX video file is not displayed correctly on the menu screen (the file name is displayed as ???_???), the subtitles text may not be displayed correctly.

???Depending on the disc, the subtitles text cannot be displayed when search and other such operations are being performed.

???English alphabet and Arabic numerals are displayed correctly. Other characters may not be displayed correctly.

???The display order on this unit may differ from how the order is displayed on a computer.

???Depending on how you create the media (writing software), files and folders may not play in the order you numbered them.

???This unit is not compatible with packet-write format. ???Depending on the recording conditions, the media may not play. ???Operation may take time to complete when there are many files

and/or folders and some files may not display or be playable.

Reference

RQT9334

(ENG)

39

RQT9334

(ENG)

Cannot read. Please check the disc.

ERROR U580

ERROR U581

ERROR U582

PLEASE WAIT

F99

U72

U73

U76

U77

F ??????

H ??????

(?????? stands for a number.)

Authorization Error.

This unit is not authorized to play this title.

Cannot play.

Cannot display on this unit.

No disc is inserted.

Rental Expired.

$ This operation is not available.

$ This operation is prohibited by this disc.

Cannot connect.

Please check the connection of the LAN cable.

IP address is not set.

Cannot obtain IP address using DHCP.

Please check the connection or router settings.

???Clean the disc. (> 5)

???You inserted a disc that has not been finalized. (> 6)

???A problem has occurred with the battery pack. Consult your dealer.

???The battery pack has been recharging but has failed to recharge for some reason. Recharge again.

???You are recharging in a location that is too hot or too cold. Recharge at normal temperature [i5 to i35 oC (i41 to i95 oF)].

???The unit is starting up. Wait until the display disappears.

???The unit is not operating correctly. Press [POWER ??/I] on the unit for 3 seconds or longer and turn off the unit. Then, turn on the unit again by pressing [POWER ??/I].

???There was a problem when connecting the HDMI. j Connected device is not compatible with HDMI. j Use a cable with an HDMI logo.

j The HDMI cable is damaged.

???BD-RE, BD-R, BD-Video or DVD Video with copyright protection cannot be played back since the device connected to the HDMI terminal is not compatible with the copyright protection.

???Video cannot be output since the copyright protection information on the BD-RE, BD-R, BD- Video or DVD Video being played back is not valid.

???A problem has occurred. (Numbers following the ???F??? or the ???H??? will be different depending on the status of the unit) Turn off the unit once, and turn it back on. Alternatively, turn off the unit, disconnect the AC adaptor and the battery pack, and attach them back again.

???[DivX]: You are trying to play the DivX VOD content that was purchased with a different registration code. You cannot play the content on this unit. (> 20)

???You inserted an incompatible disc (Discs recorded in PAL video, etc.). (> 6) ???You tried to play a non-compatible image. (> 38)

???Re-insert the SD card.

???The disc may be upside down.

???[DivX]: The DivX VOD content has zero remaining plays. You cannot play it. (> 20)

???Some operations are unsupported by the unit. For example;

j [BD-V]: During playback, reverse slow-motion or reverse frame-by-frame is not possible.

???Depending on the disc, you may not be able to perform search or skip when film previews and warning screens are being played back.

???When a hub is used but its Link lamp does not light up, check the cable connection, LAN terminal connection, cable itself (a crossover cable may have been used by mistake), etc. (> 28)

???The ???IP Address??? in ???IP Address/DNS Settings??? is ???---. ---. ---. ---???. Set the ???IP Address???, ???Subnet Mask???, and ???Default Gateway???. (Select the automatic address acquisition if necessary.) (> 29)

???If you use a hub, then check the connection between the hub and the router. j Use the UPLINK port of the hub to connect to a router. (> 28)

j Check whether or not the hub???s Link lamp lights up. If it does not light up, then check the cable connection, LAN terminal connection, cable itself (a crossover cable may have been used by mistake), etc.

???If the above conditions are OK, then the router may not operate in DHCP mode. Check the router settings and operation. You may reset the router to restore it to normal. (> 29)

To restore the unit if it freezes due to one of the safety devices being activated.

To return all settings other than some settings to the factory preset.

To return all settings to the factory preset

???Press and hold [POWER ??/I] on the unit for 3 seconds. (The settings remain unchanged.)

???Select ???Yes??? in ???Restore Default Settings??? in the Setup menu.

This returns all values in the Setup menu and the on-screen menu, except for ???On-screen Language???, ???IP Address/DNS Settings???, ???Proxy Server Settings???, ???DVD-Video Ratings???, ???BD- Video Ratings??? and ???Network Service??? to the default settings. (> 36)

???Reset the unit as follows:

1 Press [POWER ??/I] on the unit to turn off the unit.

2 Press and hold [POWER ??/I] and [RETURN ] on the unit at the same time for more than 5 seconds until ???PLEASE WAIT??? is displayed on the LCD.

3 The power will turn on and then turn off.

Operation

LCD

Sound

Reference

Audio and video momentarily pause.

BD-Video or DVD-Video is not played.

Picture-in-picture is not played with BD-Video.

BD-Live is not played with BD- Video.

Alternative soundtrack and subtitles cannot be selected.

No subtitles.

Angle cannot be changed.

The resume play function does not work.

You have forgotten your ratings password.

The VIERA Link does not work.

When a recorder or player etc. is operated with a remote control, the unit is also simultaneously operated.

When the unit???s remote control is operated, other Panasonic recorders or players etc. are also simultaneously operated.

???This occurs between playlist chapters or scenes ([AVCHD]).

???When playing a title recorded on both layers, the unit automatically switches between layers and plays the title in the same way as a normal program. However, video and audio may momentarily cut out when the unit is switching layers.

???Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is not defective. (> cover)

???You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting. (> 32)

???Some BD-Video can only be output with HDMI.

???Confirm whether the disc supports picture-in-picture.

???Confirm whether the disc supports BD-Live. (> 17)

???The inserted SD card does not have sufficient available capacity. (> 17) ???The SD card is write-protected. (> 7)

???Sub contents copied to an SD card are provided by the disc producer as a part of the BD- Video content. Even if you record images and audio onto an SD card, it cannot be played as a BD-Live. (> 17)

???The languages are not recorded on the media.

???You may not be able to use the on-screen menu to change the soundtrack and subtitles on some discs. Use the disc???s menus to make changes. (> 14)

???Subtitles are not recorded on the media.

???Turn the subtitles on. Set ???Subtitle??? on the on-screen menu to ???On???. (> 23) ???When progressive output is on, closed captions cannot be displayed.

???Angles can only be changed during scenes where different angles are recorded.

???The memorized position is cleared in the following instances:

j[???] is pressed several times.

jThe disc or SD card is removed.

jThe unit is turned off during CD or SD card playback.

jThe unit is turned off due to such occurrences as power outage, the removal of the AC adaptor or waste of the battery pack???s remaining power when the unit is turned on.

???The resume play function may not work depending on the media.

???[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.

???While the disc and SD card are removed, press and hold [SKIP :] and [SUB MENU ] on the unit at the same time for more than 5 seconds. Turn the unit off. ???DVD-Video Ratings???, ???BD-Video Ratings??? and ???Network Service??? will return to the default settings.

???Is the unit screen facing outward and closed? (> 10, 3 or 4 in ???Installation of the unit???) The unit cannot be operated with the TV remote control in any other condition.

???When using the unit with only the battery pack, operate after turning the unit on. (> 12)

???Change the remote control codes on the Panasonic recorders or players.

Specifications

Dimensions (WkHkD) (excluding protrusions and battery):

256 mm (W)k202 mm (H)k58.7 mm (D)

(10 5/64qk7 31/32qk2 5/16q)

Operating temperature range: i5 to i35 oC (i41 to i95 oF)

Operating humidity range: 10 to 80 % RH (no condensation)

Signal system:NTSC

LCD screen:

8.9q ??-Si, TFT wide-screen LCD (1024k600kRGB)

HDMI AUDIO/VIDEO output:

Number of terminals:1 system

LAN:

Number of terminals: 1 system (10BASE-T/100BASE-TX)

AUDIO/VIDEO output/input:

RQT9334

(ENG)

Pickup:

Wave length:

405 nm/661 nm/783 nm (BD/DVD/CD)

Laser power:

CLASS II/CLASS II/CLASS IIIb (BD/DVD/CD) HHS/for USA CLASS 2/CLASS 2M/CLASS 3B (BD/DVD/CD) IEC/for Canada

SD card:

SD Memory Card*4 formatted FAT12, FAT16, FAT32*5: JPEG, AVCHD format, MPEG-2

AVCHD (H.264):

Playable media: DVD-RAM, DVD-R, DVD-R DL, DVD-RW, +R, +RW, +R DL, SD card File format:AVCHD format V1.0

HDMI:

480p(525p) / 720p(750p) / 1080i(1125i) / 1080/24p HDMITM (x.v.ColorTM, High Bit rate Audio)

This unit supports ???HDAVI Control 4??? function.

Specifications are subject to change without notice.

*1 Finalizing is necessary.

*2 ISO9660 level 1 or 2 (except for extended formats),Joliet This unit is compatible with multi-session.

This unit is not compatible with packet writing. *3 Certified to the DivX Home Theater Profile.

GMC (Global Motion Compensation) is not supported. Maximum number of folders recognizable: 300 folders. (including the root folder)

Maximum number of files recognizable: 200 files. *4 includes SDHC card

includes miniSD Cards (need a miniSD Adaptor.) includes microSD/microSDHC Cards (need a microSD Adaptor.)

*5 Not support long file name

*6 Motion JPEG not supported

???Useable capacity will be less. (SD Card)

Licenses

Glossary

AVCHD

AVCHD is a new format (standard) for high definition video cameras that can be used to record and play high-resolution HD images.

BD-J

Some BD-Video discs contain Java applications, and these applications are called BD-J. You can enjoy various interactive features in addition to playing normal video.

BD-Live

This is a BD-Video (BD-ROM Profile 2) that supports the new functions such as Internet connection, etc. in addition to the BONUSVIEW function.

Bitstream

This is the digital form of multi-channel audio data (e.g., 5.1 channel) before it is decoded into its various channels.

BONUSVIEW (Final Standard Profile)

This is a BD-Video (BD-ROM Profile 1 version 1.1) that supports the new functions such as Picture-in-picture and Secondary Audio, etc.

DivX

DivX is a popular media technology created by DivX, Inc. DivX media files contain highly compressed video with high visual quality that maintains a relatively small file size.

DNS Server

A server which acts like a telephone directory and translates Internet domain names into IP addresses.

Dolby Digital

This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be multi-channel audio.

Dolby Digital Plus

Multi-channel audio and higher audio quality is made possible using Dolby Digital Plus. BD-Video supports up to 7.1 channel output.

*This unit allows audio to be decoded to a maximum of 5.1 ch of PCM audio and output from the HDMI terminal. Also, audio can be output with ???Bitstream??? to an AV amplifier that supports it.

Dolby TrueHD

Dolby TrueHD is a very high quality audio format that reproduces the studio master audio. BD-Video supports up to 7.1 channel output.

*This unit allows audio to be decoded to a maximum of 5.1 ch of PCM audio and output from the HDMI terminal. Also, audio can be output with ???Bitstream??? to an AV amplifier that supports it.

Down-mixing

This is the process of remixing the multi-channel audio found on some discs into fewer channels.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters. There is good separation between the channels, so realistic sound effects are possible.

RQT9334

(ENG)

DTS-HD

DTS-HD is a high-quality, sophisticated audio format used in movie theaters. Previous DTS Digital Surround-compatible equipment can play DTS-HD as DTS Digital Surround audio. BD-Video supports up to 7.1 channel output.

DTS-HD High Resolution Audio

This is a signal format achieved by improving the previous DTS, DTS-ES and DTS96/24 formats. It is compatible with sampling frequency 96 kHz/48 kHz. BD-Video supports up to 7.1 channel output.

DTS-HD Master Audio

This is a lossless audio format and compatible with 96 kHz/ 7.1ch or less. In addition, faithful reproduction of the master audio is enabled using lossless audio encoding technology. BD-Video supports up to 7.1 channel output.

Dynamic range

Dynamic range is the difference between the lowest level of sound that can be heard above the noise of the equipment and the highest level of sound before distortion occurs.

Dynamic range compression means reducing the gap between the loudest and softest sounds. This means you can listen at low volumes but still hear dialog clearly.

Film and video

DVD-Video are recorded using either film or video. This unit can determine which type has been used, then uses the most suitable method of progressive output.

Folder

This is a place on the disc or SD card where groups of data are stored together. Additional folders can be created within folders, and you can make detailed classifications depending on the folder structure. (> 39)

Frames and fields

Frames refer to the single images that constitute the video you see on your television. Each frame consists of two fields.

???A frame still shows two fields, so there may be some blurring, but picture quality is generally better.

???A field still shows less picture information so it may be rougher, but there is no blurring.

Gateway

IP address of the electronic device providing Internet access. Usually called a router IP address. (e.g., 192.168.0.1)

HDMI (High-Definition Multimedia Interface)

HDMI is a digital interface for consumer electronic products. Unlike conventional connections, it transmits uncompressed digital video and audio signals on a single cable.

Hub

Used for connecting more than one device to the network.

IP address

A set of numbers which distinguish each device on the network when, for example, connected to the Internet. When using a PC in a LAN to access a PC or device that is not included in the LAN, the IP address is called the local IP address. (e.g., 192.168.0.10)

JPEG (Joint Photographic Experts Group)

This is a system used for compressing/decoding color still pictures. If you select JPEG as the storage system on digital cameras, etc., the data will be compressed to 1/10???1/100 of its original size. The benefit of JPEG is less deterioration in picture quality considering the degree of compression.

LAN (Local Area Network)

A group of linked devices in a company, school or home. Indicates the boundaries of a particular network.

Local storage

This storage area is used as a destination for sub contents for playing BD-Live on BD-Video.

LPCM (Linear PCM)

This is a type of PCM format.

These are uncompressed digital signals, similar to those found on CDs.

MPEG2 (Moving Picture Experts Group)

A standard for efficiently compressing and expanding color video.

MPEG2 is a compression standard used for DVD and satellite based digital broadcasting.

MP3 (MPEG Audio Layer 3)

An audio compression method that compresses audio to approximately one tenth of its size without any significant loss of audio quality.

Pan&Scan/Letterbox

In general, DVD-Video are produced with the intention that they be viewed on a widescreen television (16:9 aspect ratio), so images often don???t fit regular (4:3 aspect ratio) televisions. Two styles of picture, ???Pan & Scan??? and ???Letterbox???, deal with this problem.

Pan&Scan: The sides are cut off so the picture fills the screen.

Letterbox: Black bands appear at the top and bottom of the picture so the picture itself appears in an aspect ratio of 16:9.

PCM (Pulse Code Modulation)

This is one format for converting analog audio into digital audio, enabling you to enjoy digital audio with no hassle.

Picture-in-picture

This is a function of BD-Video that plays the primary video and secondary video simultaneously. For instance, the function is capable of playing the original movie as the primary video while playing video commentary from the film director on a small screen as a secondary video.

Progressive/Interlace

The video signal standard of NTSC has 480 interlaced (i) scan lines, whereas progressive (p) scanning uses twice the number of scan lines, and this is referred to as 480p. Using progressive output, you can enjoy watching high resolution video.

Router

Distinguishes the IP address assigned to each device, such as the PC, and relays the flow of data within the network.

Sampling frequency

Sampling is the process of converting the heights of sound wave (analog signal) samples taken at set periods into digits (digital encoding). Sampling frequency is the number of samples taken per second, so larger numbers mean more faithful reproduction of the original sound.

Subnet mask

Enables efficient network use. A set of numbers which identify which part of the IP address allocated to every device connected to the router is the network portion.

VIERA CASTTM

An information service unique to Panasonic where specific Web sites can be viewed on this unit by connecting to the Internet without using a PC.

x.v.ColorTM

x.v.ColorTM is a name for devices that are compatible with the xvYCC format, an international standard for expanded color in motion pictures, and that follow the rules for signal transmission.

You can enjoy vivid colors of wider color ranges for a more realistic picture when connected to a TV that supports the x.v.ColorTM with HDMI cable.

1080i (1125i)

In one high definition image, 1080 (1125) alternating scan lines pass to create an interlaced image. Because 1080i (1125i) more than doubles current television broadcasts of 480i, the detail is much clearer and creates a more realistic and rich image.

1080p (1125p)

In one high definition image, 1080 (1125) scan lines pass at the same time to create a progressive image. Since progressive video does not alternate scan lines like interlace, there is a minimal amount of screen flicker.

* This unit can only output 1080/24p.

24p

This is a progressive image recorded at a rate of 24 frames per second.

720p (750p)

In one high definition image, 720 (750) scan lines pass at the same time to create a progressive image. Since progressive video does not alternate scan lines like interlace, there is a minimal amount of screen flicker.

Reference

RQT9334

(ENG)

Limited Warranty Coverage (For U.S.A. and Puerto Rico Only)

If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as ???the warrantor???) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (???Limited Warranty period???), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.

During the ???Labor??? Limited Warranty period there will be no charge for labor. During the ???Parts??? warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. If non-rechargeable batteries are included, they are not warranted. This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

Mail-In Service

For assistance in the U.S.A. and Puerto Rico in obtaining repairs please ship the product prepaid to:

Centralized Factory Service Center

Panasonic Service and Technology Company

410B Airport Road

Elgin, IL 60123-9333

Attention: BD/DVD Repair

Please carefully pack and ship, prepaid and insured, to Elgin Centralized factory Service Center.

When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD

THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES

RECEIPT/PROOF OF PURCHASE INDICATING DATE OF

PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.

CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT

RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits And Exclusions

This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as hotel, office, restaurant, or other business), rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.

User memo:

DATE OF PURCHASE _________________________

DEALER NAME_______________________________

DEALER ADDRESS ___________________________

____________________________________________

TELEPHONE NUMBER ________________________

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED

UNDER ???LIMITED WARRANTY COVERAGE???. THE WARRANTOR IS

NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE

WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE

PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you.

This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor???s Consumer Affairs Department at the addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS

LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

Customer Services Directory

(United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:

http://www.panasonic.com/help

or, contact us via the web at:

http://www.panasonic.com/contactinfo

You may also contact us directly at: 1-800-211-PANA (7262),

Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Accessory Purchases

(United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:

http://www.pstc.panasonic.com

or, send your request by E-mail to:

npcparts@us.panasonic.com

You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday ??? Friday 9 am to 9 pm, EST.)

Panasonic Service and Technology Company 20421 84th Avenue South, Kent, WA 98032

(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)

For hearing or speech impaired TTY users, TTY : 1-866-605-1277

As of October 2008

The model number and serial number of this product can be found on the rear of the unit.

Please note them in the space provided below and keep for future reference.

SERIAL NUMBER _____________________________________

Product Service

1Damage requiring service???The unit should be serviced by qualified service personnel if: (a)The AC power supply cord or AC adaptor has been damaged; or

(b)Objects or liquids have gotten into the unit; or (c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change in performance; or (e)The unit has been dropped or the cabinet damaged.

2Servicing???Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

3Replacement parts???When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4Safety check???After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

Product information

For product information or assistance with product operation:

In the U.S.A. and Puerto Rico, refer to ???Customer Services Directory (United States and Puerto Rico)??? on page 50.

In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

Reference

Index

A AC adaptor . . . . . . . . . . . . . . . . . 11 Angle . . . . . . . . . . . . . . . . . . . . . . 23 Audio

Attribute . . . . . . . . . . . . . . . . . . 23 Changing audio . . . . . . . . . . . . 16 Channel . . . . . . . . . . . . . . . . . . 23 Language . . . . . . . . . . . . . . 23, 32

AVCHD. . . . . . . . . . . . . . . . . . . . . 48

B BD-J. . . . . . . . . . . . . . . . . . . . . . . 48

BD-Live . . . . . . . . . . . . . . . . . 17, 48

BD-Video Ratings . . . . . . . . . . . . 32

BONUSVIEW (Final Standard

Profile). . . . . . . . . . . . . . . . . . 17, 48

C Chapter . . . . . . . . . . . . . . . . . . . . 15

Cleaning

Disc . . . . . . . . . . . . . . . . . . . . . . 5 Lens . . . . . . . . . . . . . . . . . . . . . . 5 Main unit. . . . . . . . . . . . . . . . . . . 5

Connection

HDMI . . . . . . . . . . . . . . . . . . . . 25

D Dialog Enhancer . . . . . . . . . . . . . 24 Direct Navigator . . . . . . . . . . . . . 14 Disc and card handling . . . . . . . . 5 Discs that cannot be played . . . . 7 DivX . . . . . . . . . . . . . . . . 20, 38, 48 DNS Server . . . . . . . . . . . . . . 28, 48 Dolby Digital . . . . . . . . . . 33, 37, 48 Dolby Digital Plus. . . . . . 33, 37, 48 Dolby TrueHD . . . . . . . . . 33, 37, 48 DTS . . . . . . . . . . . . . . . . . 33, 37, 48 DTS-HD . . . . . . . . . . . . . . 33, 37, 48

F Finalize . . . . . . . . . . . . . . . . . . . . . 6 Firmware . . . . . . . . . . . . . . . . . . . 31 Format . . . . . . . . . . . . . . . . . . . . . 17 Frame-by-frame . . . . . . . . . . . . . 16 H HDMI . . . . . . . . . . . . . . . . . . . 25, 48 I IP address . . . . . . . . . . . . . . . 28, 49 J JPEG . . . . . . . . . . . . . . . . 18, 38, 49 L LAN . . . . . . . . . . . . . . . . . . . . 28, 49

Language

Audio . . . . . . . . . . . . . . . . . 23, 32 Code list . . . . . . . . . . . . . . . . . . 36 Menu. . . . . . . . . . . . . . . . . . . . . 32 On-screen. . . . . . . . . . . . . . . . . 34 Soundtrack . . . . . . . . . . . . . . . . 23 Subtitle . . . . . . . . . . . . . . . . 23, 32

Local storage . . . . . . . . . . . . . . . 49 LPCM . . . . . . . . . . . . . . . . . . . . . . 49 M Maintenance . . . . . . . . . . . . . . . . . 5

Menu

On-screen. . . . . . . . . . . . . . . . . 23

Pop-up . . . . . . . . . . . . . . . . . . . 14

Setup . . . . . . . . . . . . . . . . . . . . 32

MPEG2. . . . . . . . . . . . . . . . . . . . . 49 MP3 . . . . . . . . . . . . . . . . . 22, 38, 49

N Noise reduction (NR)

Integrated NR . . . . . . . . . . . . . . 24

3D NR. . . . . . . . . . . . . . . . . . . . 24

O Off Timer . . . . . . . . . . . . . . . . . . . 12

On-screen

Language . . . . . . . . . . . . . . . . . 34 Menu. . . . . . . . . . . . . . . . . . . . . 23 Status messages . . . . . . . . . . . 16

P Picture-in-picture . . . . . . . . . . . 17

Playlist. . . . . . . . . . . . . . . . . . . . . 12

Pop-up Menu. . . . . . . . . . . . . . . . 14

Product Disposal . . . . . . . . . . . . . 5

Progressive . . . . . . . . . . . . . . 24, 49

Properties

Chapter . . . . . . . . . . . . . . . . . . . 15 Still picture . . . . . . . . . . . . . . . . 19

Proxy Server . . . . . . . . . . . . . . . . 29

Q Quick Start. . . . . . . . . . . . . . . . . . 36 R Ratings level . . . . . . . . . . . . . . . . 32 Remote control . . . . . . . . . . . . . . . 9 Repeat play . . . . . . . . . . . . . . . . . 24 Restore Default Settings . . . . . . 36 Resume play function . . . . . . . . 15 S SD card . . . . . . . . . . . . . . . . . 13, 17 Search . . . . . . . . . . . . . . . . . . . . . 15 Selected playback . . . . . . . . . . . 16 Setup menu . . . . . . . . . . . . . . . . . 32 Skip . . . . . . . . . . . . . . . . . . . . . . . 15 Slideshow . . . . . . . . . . . . . . . . . . 18 Slow-motion . . . . . . . . . . . . . . . . 15 Soundtrack . . . . . . . . . . . . . . . . . 23 Status Message. . . . . . . . . . . . . . 16 Still pictures . . . . . . . . . . . . . . . . 18 Subtitle . . . . . . . . . . . . . . . . . . . . 23 V VIERA CASTTM . . . . . . . . . . . . . . 30

VIERA LinkTM

???HDAVI ControlTM??? . . . . . . . . . . . . . . 26

X x.v.ColorTM . . . . . . . . . . . . . . . . . . 49

24p. . . . . . . . . . . . . . . . . . . . . . . . 24, 34

p