Panasonic_Computer_Monitor

Panasonic Broadcast

AG-HMC150

Menu Information

Using the setup menus

Use the setup menus to change the settings to suit the scenes you are shooting or what you are recording.

2 Tilt the Operation lever in the directions to move the yellow cursor to the function you wish to set.

MENU button

MENUEXEC

3 Push the Operation lever (or tilt in the

PUSH-ENTER

Operation

direction) to display the setting items.

lever

Using the menus

AUDIO MON/ADV

Example:

4 Tilt the Operation lever in the directions to move the yellow cursor to the item you wish to set.

Example:

???The menu items indicated in the gray characters cannot be changed its settings.

1 When the unit is in other than playback or recording mode, press the MENU button.

The following is displayed on the viewfinder and LCD monitor.

CAM mode (Example)

PB mode (Example)

5 Push the Operation lever (or tilt in the direction) to set the item.

To change values or other parameters, tilt the Operation lever in the directions.

Example:

???Tilt the Operation lever in the direction to return to the previous menu.

6 Repeat steps 4 - 5 to change any other items.

Press the MENU button to complete settings and return to the normal screen.

7 Repeat steps 2 - 5 to change any other settings.

Press the MENU button to complete settings and return to the normal screen.

Initializing the menu settings

The menu settings contain both the user file settings and the scene file settings. You can initialize them separately.

To initialize the user file (i.e. all the settings other than the scene file settings)

Select INITIALIZE in LOAD/SAVE/INIT of the USER FILE screen. The current menu settings of user file will return to the factory settings.

To initialize the scene file

From the 6 scene files, select the one you want to initialize with the scene dial. Then in the SCENE FILE screen, LOAD/SAVE/INIT, select INITIALIZE. The settings for only the selected scene file are returned to the factory settings.

??? This does not effect the other scene files.

If you wish to initialize the user file and scene files at the same time, the user file and all six scene files can be restored to their factory default settings by selecting YES for the MENU INIT item on the OTHER FUNCTIONS screen.