USB Handset

UTR-1-1 (BK) Installation Guide

2005.12 Ver:1.1

Wall Mounting

UTR-1-1 can be installed on the wall by using a wall plate. There are two wall mounting holes on the base of UTR-1-1. To hang the UTR-1-1, align the holes and slide it on the wall plate.

Remove handset hanger hook and rotate as illustrated below.

USB Connection

Plug the USB cable (Type A connector) into the back of cradle and plug USB cable (Type B connector) into your PC’s USB port.

Handset Connection

Plug the handset connector (RJ-11) into the bottom

of cradle. Route the handset cable in the handset

groove.