Note: If your home stereo does not support Line Out audio, you may have to connect through the headphone jack with the included RCA-to-headphone cable.

Note: To stream music from your phone (when equipped with 2.5mm stereo output jack), use the included RCA-to- 2.5mm cable to connect to the adapter's Audio In jacks.

Enter the passkey: 0000
Select OK. The Pairing button indicator light flashes rapidly to indicate pairing is successful.
5
6
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road Schaumburg, IL 60196
www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for hearing impaired)
1-800-461-4575 (Canada) Part Number: 6809494A97-C
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.
The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
?? Motorola, Inc. 2005.
4 PAIR WITH
BLUETOOTH PHONE
Enable your stereo adapter to receive music from the built-in MP3 player of your Bluetooth A2DP-capable phone:
Note: These steps are for most Motorola phones. Certain phones require additional steps to enable stereo audio streaming (A2DP Profile). See your phone's user's guide to verify proper steps.
1 Turn on the stereo adapter by pressing in the Power button. After a few moments, the Pairing button indicator light begins blinking to indicate the power is on.
2 From the phone, perform a Bluetooth device discovery while holding it close to the adapter.
The phone lists Bluetooth devices it finds.
3 Select Motorola DC800.
4 Select OK or Yes to pair your stereo adapter and phone.

3 PAIR WITH

BLUETOOTH HEADSET

Enable your stereo adapter to transmit music to your Bluetooth wireless headphone:

Note: This guide does not provide steps for pairing your stereo adapter with a Bluetooth USB PC Adapter or a Bluetooth-enabled PC. Consult the USB Adapter or PC's user guide for details on completing this step.

1Holding your headphone close to the stereo adapter, place the headset into pairing mode.

If using the Motorola HT820 Bluetooth Stereo Headphone, place in pairing mode by pressing and holding the headphone's Call button for approximately 6 seconds until the indicator light is solidly lit. For other products, refer to your headset's user's guide for details.

2Turn on the stereo adapter by pressing in the Power button. After a few moments, the Pairing Button indicator light begins blinking to indicate the power is on.

3 PAIR WITH BLUETOOTH

HEADSET

CONTINUED

3Press and hold the Pairing button on the stereo adapter until the indicator light remains solidly lit (about 5 seconds).

The stereo adapter searches for Bluetooth devices. When the stereo adapter finds the headphone, the indicator light rapidly flashes indicating that pairing is successful.

Once the connection is established, the indicator light changes to a slower, pulsing light.

BACK PANEL

CONNECTORS

The DC800 Home Stereo Adapter contains the following back panel connectors.

Audio In

Recycling Mobile Phones and Accessories

Jacks

Do not dispose of mobile phones or electrical

accessories, such as chargers or headsets, with your household waste. In some countries or regions,

Power Jackcollection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren't available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.