Warning: Traffic laws and current traffic conditions must always be observed and take precedence over the instructions issued by the navigation system. The user should be aware of situations where current traffic conditions and the instructions from the navigation system may be in conflict.

The use of the navigation system does not relieve the user of his/her responsibilities. The user is ultimately responsible for the vehicle under his/her control and should be aware of the surroundings at all times. For traffic safety reasons, it is recommended that routes should be planned in a stationary vehicle before starting a trip.

MOTOROLA IS NOT RESPONSIBLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

CONSEQUENTIAL, EXEMPLARY, SPECIAL, OR PUNITIVE DAMAGES, OR OTHER

before you begin

Take a moment before you get started to familiarize yourself with the components of your MOTONAV TN30.

DAMAGE ARISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT.

THIS INCLUDES DAMAGE TO PROPERTY AND, TO THE EXTENT PERMITTED BY

LAW, DAMAGES FOR PERSONAL INJURY AND DEATH.

Laws in some areas prohibit the use of a cellular phone and other devices when driving a motor vehicle. Please use the utmost care in using your devices safely under all circumstances. It is the responsibility of each user to be aware of and abide by any and all local laws and ordinances, which may restrict the use of cellular phones and other devices.

microphone

speaker (on reverse side)

indicator light

charger port

Your local law may prohibit attaching the Navigation Device to the windshield. In such case, attach the mount to the enclosed plastic disk and adhere it securely to a clean, smooth surface of your car. Never position the device in a manner which blocks your view of the road, interferes with the safe operation of the vehicle (e.g. do not place on the steering wheel or in front of an air bag), or could otherwise result in injury to the user. Always obey local laws and restrictions concerning use of such products.

mount it

You can safety secure your MOTONAV TN30 in your car using the included mounting holder.

1Slide holder down onto the extension arm.

2Affix suction cup on extension arm to the windshield (push up on lever).

4

mount it

Note: You can also affix suction cup to the dashboard using the included circular disc (not shown). To do this, affix circular disc to your dash or center console, then attach the suction cup on the extension arm to the disc.

3 Place your MOTONAV TN30 in the holder.

4Using both hands, adjust extension arm for optimal viewing off your MOTONAV TN30.

5

power it

Once mounted, apply power to your MOTONAV TN30 using the included car charger.

1Plug the charger into the power outlet in your vehicle.

2Plug the charger into the USB port on your device.

When plugged into a charger, the indicator light is orange to indicate the device???s internal battery is charging. When fully charged, the indicator light turns green.

power it

Note: Your battery is designed to last the life of the product. It should only be removed by a recycling facility. ANY ATTEMPT TO REMOVE OR REPLACE

YOUR BATTERY WILL DAMAGE THE PRODUCT.

For more details on powering and charging your MOTONAV TN30, see

???power and charging??? on page 20.

get started

To get started, you need to turn on your MOTONAV TN30 and configure initial device settings:

1Press and hold the Power button to turn on the device until the display becomes active.

After a few moments, a configuration wizard appears to provide step-by-step setup instructions.

2Set your language preference and tap OK.

3Review Warning message and tap OK.

4Review End User License Agreement (EULA), then tap the I Agree checkbox and tap OK.

5Set your time zone settings and tap OK.

6Set your preferred measurement units and tap OK.

get started

7If using your Bluetooth phone to make and receive handsfree calls from your MOTONAV TN30, tap Yes button and follow these substeps to connect to your phone. Otherwise, tap No and skip to step 8.

a Turn off any Bluetooth devices previously paired with your MOTONAV TN30.

b Turn on the Bluetooth feature on your Bluetooth phone. c Place phone in Bluetooth search mode.

d Select MOTONAV TN30 from search results on your phone.

e Select OK or Yes to pair your MOTONAV TN30 with your phone.

f If prompted, enter 0000 for passkey. When your MOTONAV TN30 successfully pairs and connects with your phone, you see a confirmation message.

After successfully pairing your MOTONAV TN30 and Bluetooth phone, you don???t need to repeat this step. For each use, ensure that your device is turned ON and that your phone???s Bluetooth feature is ON.

8Verify that the device displays your current location on the map view screen like shown below.

If you see FindingYour GPS Location at bottom of the screen, the MOTONAV TN30 is searching for GPS satellites. Move device to an open location with a clear view of the sky and wait a few minutes to obtain satellite GPS signal. When obtained, your current location appears on the map view screen.

Initial configuration of your MOTONAV TN30 is now complete!

The map view screen provides your main view when driving to your destination. Tap the screen icons to control the map view and perform other tasks.

find an address

To create a route to an address:

1From the map view screen, tap Menu to access the main menu screen.

2Tap Go!.

3Tap Address. You see:

Note: To change state of destination, tap Change and select new state.

4Tap the Address button.

5Enter the town/city and tap OK.

6Enter the street and tap OK.

7Enter the address number and tap OK.

8Tap Go.

A route is calculated to your selected address.

12

use route screen

Once you???ve mapped your route, the map view screen displays your route details.

route status bar

Tap the route status bar to switch between viewing:

???travel distance, time remaining, and estimated time of arrival,

???current street name, or

???current speed and altitude.

find a destination

To search for and create a route to a business or other point of interest:

1From the map view screen, tap Menu to access the main menu screen.

2Tap Go!.

3Tap Food, Fuel, Lodging and More. You see:

4Tap My Current Location to search near your current location.

5Tap desired destination type (or tap Spell Place to search by name).

6Select the category and tap OK.

7Select the destination and tap OK.

8Tap Go.

A route is calculated to your selected destination.

receive a call

To make and receive calls using the MOTONAV TN30, a Bluetooth handsfree

(HF) connection must be established with your phone (see step 7 on page 9 for details).

When there???s an incoming call, the screen notifies you:

To answer the call, tap Answer. To ignore the call, tap Ignore.

while on a call

When a call is active, the map view screen displays icons to mute/unmute and end the call.

To mute the MOTONAV TN30 microphone, tap the Mute icon. When the call is muted, the icon changes to an Unmute icon. To unmute the MOTONAV TN30 microphone, tap the Unmute icon. The icon changes back to the Mute icon.

To end the call, tap the End Call icon.

During a call, you can switch the display to an In Call screen. To display the

In Call screen, tap the In Call Screen icon.

while on a call

The In Call screen allows you to mute/unmute, end, and transfer a call between your phone and MOTONAV TN30.

To mute the MOTONAV TN30 microphone, tap Mute. When the call is muted, the icon changes to Unmute. To unmute the MOTONAV TN30 microphone, tap Unmute. The icon changes back to the Mute icon.

To end the call, tap End Call.

To transfer call to your phone, tap Talk on Phone. When the call is transferred, the icon changes to Talk onTN30. To transfer the call back to your MOTONAV TN30, tap Talk onTN30. The icon changes back to

Talk on Phone.

During a call, you can switch back to the map view screen by tapping the upper left arrow.

make a call

To place a call using the MOTONAV TN30, tap the Call icon from the map view screen, or tap Call from the main menu screen). You see:

From this screen, you can do the following:

???To call a recent incoming /outgoing number, tap Recent Calls.

???To redial the last number, tap Redial.

???To dial a number, tap number followed by Dial.

???To use voice dialing, tap Voice Dial and follow the voice prompts.

tips and tricks

???To choose the items (buttons, bars, icons) displayed on the map view screen, go to Map in the Settings screen from the main menu.

???To choose categories of locations to display on the map, go to Map Icons in the Settings screen from the main menu.

???To enable/display specific voice prompts and sounds, go to Prompts in the Settings screen from the main menu.

???To browse map, go to Free Map Browsing in the Settings screen from the main menu. Tap the map to select a location.

???To reset the MOTONAV TN30, press the Power button for 8 seconds, then press Power button again to turn on. You can also use a pin to press the Reset button.

???When creating a route to an address, after selecting the city, you can choose to go to the center of the city (versus an address) by selecting the ???City Center??? destination.

power and charging

Your MOTONAV TN30 should be powered using the included car charger. When you disconnect the charger (or turn vehicle ignition off), it prompts you to touch the screen to switch to battery power. If you do not touch the screen, it will turn off after 30 seconds.

Please note the following:

???If powering down your MOTONAV TN30 using the Power button, it must also be powered on using the Power button.

???If your MOTONAV TN30 turns off after disconnecting the external power source, it turns back on when external power is restored or if you use Power button.

???If your MOTONAV TN30 is not used for more than 7 days, it enters a power saving mode that requires a Power button press to exit.

???When operating on battery power, the indicator light flashes red when the battery is low.

???Using another charger to charge your MOTONAV TN30 may not be as effective.

???The included car charger will not power Motorola phones.

20

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196

www.motorola.com

www.motorola.com/motonav

1-877-MOTOBLU (Motorola Bluetooth Support)

1-800-331-6456 (United States)

1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada)

The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.

All features, functionality, and other product specifications, as well as the information contained in this user???s guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product and service names are the property of their respective owners.

?? 2008 Destinator is a registered trademark of Intrinsyc Software International, Inc. Unauthorized duplication is a violation of all applicable laws. Other names and brands mentioned herein may be the property of their respective owners. Patents pending.