Welcome and congratulations on your purchase of a

Consumer Rated No.l Maytag Washer! Your complete satisfac-

tion is very important to us.

Read this manual for best

results. It contains instructions

to acquaint you with proper operating and maintenance pro- cedures.

In addition you will find a Laundering Tips guide packed with your washer. It contains information on rec- ommended laundering procedures, stain removal and special laundering situations.

go wrong, we suggest consulting the

"Before You Call" section in the back of this

Save time and money. If something should book. It is designed to help you solve basic

problems before consulting a servicer.

However, should you need assistance, it is helpful to:

1) Have complete model and serial number identifica- tion of your washer. This is located on a data plate on the top edge of the control panel. Record these numbers below for easy access.

2) Have proof of original date of purchase.

Please attach your sales receipt here.

_

_.__

1.Read all instructions before using the appliance,

2.As with any equipment using electricity and having moving parts, there are potential hazards. To use this appliance safely, the operator should become familiar with the instructions for operation of the appliance and always exercise care when using it.

3.Do not install or store this appliance where it will be exposed to the weather.

4.Install and level washer on a floor that can support the weight.

5.This appliance must be properly grounded. Never plug the appliance cord into a receptacle which is

not grounded adequately and in accordance with local and national codes. See installation instruc- tions for grounding this appliance,

6.To avoid the possibility of fire or explosion:

a.Do not wash items that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode. Hand wash and line dry any items containing these substances,

Any material on which you have used a cleaning solvent, or which is saturated with flammable liq- uids or solids, should not be placed in the washer

until all traces of these liquids or solids and their fumes have been removed,

These items include acetone, denatured alcohol, gasoline, kerosene, some liquid household clean-

ers, some spot removers, turpentine, waxes and wax removers.

b.Do not add gasoline, dry-cleaning solvents, or

other flammable or explosive substances to the

wash water. These substances give off vapors that could ignite or explode,

c.Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not

been used for such a period, before using a wash-

ing machine or combination washer-dryer, turn on all hot water faucets and let the water flow

from each for several minutes. This will release any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

7.Do not reach into the appliance if the tub or agitator is moving.

8.Do not allow children to play on or in the appliance. Close supervision of children is necessary when the

appliance is used near children.

9.Do not tamper with controls.

10.Do not repair or replace any part of the appliance or attempt any servicing unless specifically recom-

mended in published user-repair instructions that you understand and have the skills to carry out.

I 1. Unplug power supply cord before attempting to ser- vice your washer.

12.The agitator should not be removed. If the agitator is removed, it must be replaced by pushing down completely and the locking screw tightened before

the washer is operated.

13.Store laundry aids and other material in a cool, dry place where children cannot reach them.

14.Do not wash or dry items that are soiled with veg- etable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

15.Do not use chlorine bleach and ammonia or acids (such as vinegar or rust remover) in the same wash. Hazardous fumes can form.

16. Do not machine wash fiberglass materials. Small

particles can stick to fabrics washed in following loads and cause skin irritation.

17.Before the appliance is removed from service or dis-

carded, remove the door to the washing compart- ment.

Press the appropriate button to select the wash and rinse tem- peratures. Follow the garment care label for best results. Use

the chart below as a guide.

WASH / RINSE TEMP

Bleach Dispenser

The dispenser automatically dilutes liquid chlorine bleach before it reaches your wash load. To use, follow these steps:

1, Measure liquid chlorine bleach carefully, following the instructions on the bottle.

2.Add the bleach to the dispenser before adding the load. Avoid splashing or over-filling the dispenser.

NOTE:

???Never pour undiluted liquid chlorine bleach directly onto the load or into the wash tub. It is a powerful chemical and can cause fabric damage, such as tear- ing or color loss, if not used properly.

???If you prefer to use color-safe, non-chlorine bleach,

pour it into the wash tub with your detergent. Do not pour non-chlorine bleaches into the bleach dispenser.

Fabric Softener Dispenser

This dispenser automatically releases liquid fabric soft- ener at the proper time during the cycle. To use, follow these steps:

1.Pour liquid fabric softener into the dispenser using the amount recommended on the package.

2.Add warm water to the dispenser until it reaches the MAX line.

NOTE:

???Do not stop the washer during the first spin. This will cause the dispenser to empty too soon.

???Never pour fabric softener directly on the load. It will leave spots and stains.

???Use the dispenser for liquid fabric softeners only. Clean the area in and around the dispenser frequently with hot water, detergent and a soft brush.

Pour liquid chlorine bleach into bleach dispenser.

Pour liquid fabric softener into cup and dilute with warm water.

For detailed information on sorting, pretreating stains, etc., see the enclosed Laundry Tips pamphlet.

Detergent

???Use either liquid or granular laundry detergent. For

best results, be sure detergent is added to the

washer BEFORE the load and be sure wash water is above 65 ?? F.

???Use the correct amount of detergent for the load size, soil level and water conditions. Use more detergent if you have hard water and very soiled loads,

If you have soft water or a lightly soiled load, use less detergent. (See manufacturer's instructions.)

???Wipe up any detergent spills on the washer,

Loading

???Put dry, unfolded clothes loosely in the tub, up to top row of holes for a maximum load.

???Do not wrap large items like sheets around the ag tor.

???Mix large and small items for best circulation. W bulky items like blankets separately.

???When laundering permanent press items or item_ delicate construction, washable woolens or loos knit items, never use less than the MEDIUM w_ level setting. This will minimize shrinkage, wrinkl and pulling of seams.

???For best results, add the detergent to washtub bef adding the load.

Additional 7ps

???If the washer stops during the spin, it may be due to an unevenly distributed load. If this happens, push in the control knob, open the lid, redistribute the load, close the lid and pull out the control knob. The spin

will resume at the point it was interrupted.

???The washer will pause briefly throughout each cycle, These pauses are normal,

???This washer is designed so that it will not agitate spin when the lid is open. It will, however, fill w the lid open so water is available for pretreating sta or diluting fabric softener.

???If you open the lid during a cycle, the washer stop. When the lid is closed and the control kn pulled out, the washer will continue the cycle at 1 point it was interrupted.

Turn off the water faucets after finishing the day's wash- ing. This will shut off the water supply to the washer and prevent the unlikely possibility of damage from

escaping water.

Use a soft cloth to wipe up all detergent, bleach or other spills as they occur,

Clean the following as recommended:

Control Panel - clean with a soft, damp cloth and glass cleaner. Do not use abrasive powders or cleaning pads.

Cabinet - clean with soap and water followed with an

appliance wax if desired,

Interior - hard water deposits may be removed, if needed, using a recommended cleaner labeled wash- er safe.

Lint Filter - it is self-cleaning and requires no mainte- nance. The filter is located under the agitator on the bottom of the washtub. During the wash and rinse portion of the

cycle, lint is col- lected on the ill- ter. Then during

the spin and drain the filter is

cleaned automat- ically.

Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare the washer for storage as follows:

???Select the NORMAL cycle for regular fabrics and add

one cup of chlorine bleach or white vinegar to a full load of water without clothes. Run the washer

through a complete cycle.

???Turn the water faucets off and disconnect the inlet hoses.

???Advance the cycle control knob to Spin and lower the drain hose to eliminate any water that may be in the drain hose.

???Disconnect the washer from the electrical supply and

leave the washer lid open to let air circulate inside the tub.

!i_'_!,!iii

Won't Agitate

<.

Won't Spin

or Drain

???Check fuse or reset circuit breaker.

???Turn the control knob to proper cycle and pull knob out to start the washer. If equipped with buttons, be sure they are fully depressed.

???Close lid and pull knob out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.

???The washer is equipped with a lid switch failure detector. If the lid switch

should malfunction, the detector will stop operations for your safety. Call for service.

???Unevenly distributed load. Redistribute the load, close the lid and pull knob out. Check for leveling. Be sure water level is acceptable for load size.

???Check fuse or reset circuit breaker.

???Straighten drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service.

???Close lid and pull knob out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.

???Suds lock - caused by too much suds. Rewash without detergent. Use cor- rect amount of a low-sudsing detergent.

???The washer is equipped with a lid switch failure detector. If the lid switch

should malfunction, the detector will stop operations for your safety. Call for service.

After the first year from the date of original retail purchase through ed parts which fail in normal home use will be repaired or replaced owner paying all other costs, including labor.

the time periods listed below, the designat- free of charge for the part itself, with the