???
Deep Cleaner
Your AGILITY??? Deep Cleaner is fully assembled and
ready to begin cleaning!
www.maytag.co.uk
???
Deep Cleaner
Your AGILITY??? Deep Cleaner is fully assembled and
ready to begin cleaning!
www.maytag.co.uk
Important Safeguards!
When using an electrical appliance, always follow basic precautions, including the following:
READ ALL INSTRUCTIONS BEFORE USING APPLIANCE.
WARNING: To reduce the risk of fire, electric shock, or injury:
???Use indoors only.
???Use only on surfaces moistened by the cleaning process. Do not immerse product.
???Connect to a properly earthed source using the factory fitted plug and cable only.
???Do not clean over floor electrical outlets.
???Do not use without tanks in place.
???Use extra care when cleaning on stairs. Do not place deep cleaner on stairs.
???Use deep cleaner only for its intended use as described in the instructions.
???Use only attachments supplied or recommended.
???The use of an extension cord is not recommended.
???Unplug deep cleaner when not in use. Turn off all controls before unplugging.
???Unplug deep cleaner before connecting the powered hand tool.
???Always disconnect cable from electrical source before servicing the deep cleaner.
???Do not unplug by pulling on cable. To unplug, grasp the plug, not the cable.
???Never handle plug or appliance with wet hands.
???Do not pull or carry by cable, use cable as a handle, close door on cable or pull cable around sharp edges or corners. Do not run appliance over cable. Keep cable away from heated surfaces.
???Do not use with damaged cable or plug. If appliance is not working as it should, please refer to ???Trouble Shooting???.
???Do not point tools toward people or pets.
???Keep detergents and other cleaners out of children's reach.
???Do not use to pick up flammable or combustible liquids or use in areas where they may be present.
???Avoid picking up hard, sharp objects with the deep cleaner. They may damage the machine.
???Keep hair, loose clothing, fingers, feet and all parts of body away from openings and moving parts.
???Store in a dry place. Do not expose machine to freezing temperatures.
Save these instructions!
To contact us:
???www.maytag.co.uk
???01737 231000 - our Consumer Response Centre (9 AM to 5 PM Monday - Friday)
???ukservice@maytag.com
2
Fill in and Save
For your records, enter the model number and serial numbers in the spaces provided. These numbers are located on the data label on the underside of the cleaner.
Model No. ____________________________
Serial No. _____________________________
Save your sales receipt and attach it to this manual. Proof of date of purchase may be required for the guarantee.
Important safeguards . . . . . . . . 2 Unpacking . . . . . . . . . . . . . . . . . 3 Cleaner description . . . . . . . . . . 4 Deep cleaner basics . . . . . . . . . . 5 Filling the tank . . . . . . . . . . . . 5 Emptying the recovery tank . 6 Attaching the hose . . . . . . . . . 7 Selecting & attaching tool . . . 7 Draining & storing hose . . . . 8 Cleaning carpet . . . . . . . . . .
A.Deep cleaner
B.Detergent
B
A
3
1
2
Your AGILITY??? Deep Cleaner is fully
This deep cleaner is intended for household use.
Operate deep cleaner only at voltage specified on data plate on back of cleaner. Plug deep cleaner into a properly earthed source.
assembled and ready 1 to begin cleaning!
2
A
B
4
Deep Cleaner Basics
Fill the solution tank
Unplug deep cleaner from electrical source.
??? Press button (A) and remove solution tank (Fig. 3)
??? Release latches (B) on tank cap and remove (Fig. 4)
??? Use cap (Fig. 5) to measure the proper amount of detergent according
to the chart below:
NOTE: For best results, use only MAYTAG detergents.
They are specifically formulated for use with your AGILITY??? Deep Cleaner.
???Pour detergent into tank
???Fill tank to fill line (C) (approx. 4 litres) with hot tap water (Fig. 6)
???Replace cap. Secure both latches (B) (Fig. 4)
???Place bottom of tank onto cleaner. Pivot top of tank and snap in place (Fig. 7)
Caution: Detergents contain Anionic and Nonionic Surfactants. Avoid contact with the eyes and skin. In case of contact with eyes, flush with cold water for 15 minutes. In case of contact with skin, wash with water. If irritation persists, refer to your GP.
3
A
4
B
B
5
6 C
7
12
E
E
6
Attach the hose
Unplug deep cleaner from electrical source.
???Place handle in upright position.
???The hose and tool caddy can be removed from the cleaner if you desire.
???Remove hose from tool caddy.
???Open hose door (A) on back of deep cleaner (Fig. 13).
???Align hose connector with hose and solution ports (C) (Fig. 14).
???Push hose into port and lock in place.
???To remove hose: Squeeze latches (D) on top and bottom of hose. Remove hose from port (Fig. 15).
???Close hose door (A) tightly (inset).
Select tool
13
A
14
A 
C 
B
15
D
A
Attach tool
Unplug deep cleaner from electrical source.
??? Slide tool onto hose. Snap tool over tab (E) on hose (Fig 18).
E
???To remove tool: Push forward and up on latch (F) (Fig. 19). Slide tool off hose.
E
D
24
F
8
Hose caddy
You can either store the hose caddy on the cleaner or remove it to store separately.
To store caddy on the cleaner:
???Slide tabs (G) on caddy into slots on back of cleaner (Fig. 25).
???Hook top of caddy to cleaner (H).
???Wrap cable around cable hooks (I) on caddy (Fig. 26). Rotate top hook to release cable.
To remove caddy from the cleaner:
???Lift caddy off cleaner (Fig. 27).
???Wrap cable around cable hooks (J) on back of cleaner (Fig. 28). Rotate bottom hook to release cable.
Brush speed selector
Choose ON for normal cleaning of carpet.
Choose OFF when brushing is not desired.
25
H
G 
26
I
27
29
Push ???Clean Surge??? button (K) to release extra cleaning solution.
Use the ???Clean Surge??? button when cleaning heavily soiled areas of carpet (traffic areas, spots, etc.)
No cleaning solution removes all stains from all carpets. Stain removal varies with the type of spill, time passed before removal, carpet material, and carpet type.
1
3
Cleaning carpet
Remove lightweight furniture (tables, lamps, etc.) from area to be cleaned.
Protect any remaining furniture by pinning up furniture skirts and placing aluminium foil or plastic under legs.
Vacuum carpet thoroughly to remove loose dirt, hair, lint and other debris (Fig. 31).
Test detergent for colorfastness on a hidden area of carpet.
Wet a white cloth or paper towel with some detergent. Gently rub onto a hidden area of carpet. Wait ten minutes. Blot with white cloth or paper towel and check for color transfer.
32
33
34 Start
Use ???Clean Surge??? button (B) in heavily soiled areas (Fig. 35).
Exit
12
13
When water has reached the full line in the recovery tank, the cleaner will NOT pick up any more dirty solution.
Allow carpet to dry. Avoid walking on the carpet until it is dry.
Increased air circulation (open doors, turn on fans, etc.) will help carpet dry thoroughly.
Vacuum thoroughly after carpet has dried. This will reduce any shading left
by the deep cleaner???s brushes.
10
36
37
38
39
40
A
41
A
42
B
43
C
Routine care for your Deep Cleaner
Clean the nozzle
Unplug deep cleaner from electrical source.
???Remove solution and recovery tanks to prevent possible leaks.
???Lift up on top of nozzle (A) and slide off cleaner (Fig. 41).
???Wipe debris off nozzle and front of cleaner with a damp cloth.
???Tilt cleaner back, raising front of cleaner off floor. Slide nozzle
(B) up from bottom of cleaner (Fig. 42).
???Press on upper portion of nozzle to snap in place.
Clean the brushes
Unplug deep cleaner from electrical source.
???Remove solution and recovery tanks to prevent possible leaks.
???Tilt cleaner back so handle rests on the floor.
???Pull brush assembly firmly to remove (Fig. 43).
???Rinse brushes under running water.
???Align posts (C) on brush assembly with slots (D) in cleaner (Fig. 44).
???Turn brushes slightly to align square post (E) with square hole
(F) in cleaner (Fig. 44).
???Press brush assembly firmly and snap in place.
Storing your Deep Cleaner
???Empty solution tank and rinse thoroughly.
???Place empty solution tank on deep cleaner. Turn deep cleaner ON. Squeeze trigger and push deep cleaner forward and back several times. This will clear any solution remaining inside the cleaner.
???Empty recovery tank, rinse thoroughly and let air dry.
???Allow brushes and underside of deep cleaner to air dry thoroughly before storing deep cleaner on a carpeted or wood surface.
Lubrication
The motor is equipped with bearings which contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Do not add lubricant to motor bearings.
Troubleshooting and Service
Use the list below to help solve minor problems.
If the fault is something that you cannot correct yourself, please contact:
???01737 231000 - our Consumer Response Centre (9AM - 5PM, Monday - Friday)
???ukservice@maytag.com
IMPORTANT
Cord Replacement
This MAYTAG appliance is supplied complete with a plug.
If the main cord of this appliance is damaged, the appliance must be repaired by an Authorised Maytag Repairer to avoid safety hazard.
Guarantee
The 2 year guarantee on your AGILITY??? Deep Cleaner becomes effective from your date of purchase. We suggest you record the model and serial number from the information plate on your AGILITY??? Deep Cleaner and retain it with your original proof of purchase.
This guarantee covers all materials and manufacturer assembly of your AGILITY??? Deep Cleaner.
All repairs must be authorised in advance by our Consumer Response Centre and subsequently completed by an authorised agent. Any repair completed under guarantee will not extend the original period of your product guarantee.
This guarantee applies to normal domestic use only.
This guarantee does not cover normal wear and tear, negligence, misuse, accidental damage, blockages or consumable items.
This guarantee does not cover any consequential loss.
These guarantee benefits are in additional to your statutory rights.
14
15
Basic steps for cleaning
???Vacuum carpet thoroughly to remove loose dirt.
???Test detergent for colorfastness on a hidden area of carpet or upholstery.
???Pretreat spots, stains and high traffic areas with MAYTAG Spot and Stain Spray. Blot spots or stains to remove as much of the spot as possible.
???Fill solution tank with hot tap water and proper amount of MAYTAG detergent.
Use only MAYTAG brand detergents in your deep cleaner. Other brands may damage the cleaner.
???Clean the carpet or upholstery.
???Squeeze and hold trigger. Move cleaner forward and back.
???Release trigger and go over same area to pick up dirty solution. Use additional dry strokes to remove more dirty solution.
???Tough spots and stains may need additional treatment with Spot and Stain Spray.
???Listen carefully! When the motor sound rises in pitch or changes, the recovery tank needs to be emptied.
When the recovery tank is full, the cleaner will no longer pick up dirty solution.
???Allow time for the carpet or upholstery to dry. Avoid walking on carpet or using upholstery until it is completely dry.
???When carpet and/or upholstery are dry, vacuum one more time.
*MAYTAG and 
are registered trademarks