Table of Contents Part Number Index

Rear Discharge Grooming

Mower

FDR2548, FDR2560, FDR2572, FDR2584 & FDR3590

310-069P

Parts Manual

20658

Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!

?? Copyright 2007 Printed 11/06/07

Cover photo may show optional equipment not supplied with standard unit.

Table of Contents Part Number Index

Table of Contents

?? Copyright 2007. All rights reserved.

Land Pride provides this publication ???as is??? without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only.

Land Pride is registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

Table of Contents Part Number Index

Alphabetized Table of Contents

Table of Contents Part Number Index

Table of Contents Part Number Index

Applies to FDR2548, FDR2560, FDR2572, FDR2584

17370

2.816-298C RUBBER PLUG 1 3/8 W/CROSS SLIT

3.817-371C PLASTIC BELT GUARD FDR2584

4.817-371C PLASTIC BELT GUARD FDR2584

Applies to FDR2560, FDR2572, FDR2584

17713

Applies to FDR2560, FDR2572, FDR2584

dwg17713 Drawing Image Number

310-254S FRONT ROLLER ASSY

1. 310-266H WLDMT. ROLLER SHAFT

2.310-477D FRONT ROLLER BRACKET RH.

2.310-477D82 FRONT ROLLER BRK RH. ORANGE

3.310-478D FRONT ROLLER BRACKET LH.

3.310-478D82 FRONT ROLLER BRK LH. ORANGE

4.802-015C RHSNB 3/8-16X1 GR5

6.804-025C WASHER FLAT 3/4 SAE PLT

7.805-016C PIN COTTER 3/16 X 1 1/4 PLT

8.817-049C 4 X 10 ROLLER WHEEL

Applies to FDR2548

20563

Applies to FDR2548

dwg20563 Drawing Image Number

315-516S ASSY. FRONT ROLLER

1. 315-515H WLDMT. ROLLER SHAFT

2.315-880D ROLLER BRACKET RH.

3.315-881D ROLLER BRACKET LH.

4.802-015C RHSNB 3/8-16X1 GR5

6.804-021C WASHER FLAT 5/8 SAE PLT

7.805-016C PIN COTTER 3/16 X 1 1/4 PLT

8.817-082C 4 X 5 1/2 FRONT ROLLER

Applies to FDR2560, FDR2572, FDR2584

17470

3.803-263C NUT HEX FLANGE LOCK 5/8-11 PLT

7.804-022C WASHER LOCK SPRING 5/8 PLT

8.803-022C NUT HEX 5/8-18 PLT

9.805-143C PIN HAIR COTTER .120 PLT

10.805-142C PIN CLEVIS 3/4 X 3 1/2 PLT

12.310-019H LOWER HITCH WELDMENT

13.805-015C PIN LYNCH 5/16 X 1 3/4

14.310-020S LOWER HITCH PIN

15.310-274H WELDMENT FDR2560

15.310-258H82 WELDMENT FDR2572 ORANGE

15.310-267H WELDMENT FDR2584

15.310-267H82 WELDMENT FDR2584 ORANGE

16.802-657C HFS 5/8-11 X 1 1/2 GR5

Applies to FDR2548

19267

3.803-263C NUT HEX FLANGE LOCK 5/8-11 PLT

7.804-022C WASHER LOCK SPRING 5/8 PLT

8.803-022C NUT HEX 5/8-18 PLT

9.805-143C PIN HAIR COTTER .120 PLT

10.805-142C PIN CLEVIS 3/4 X 3 1/2 PLT

11.805-140C PIN CLEVIS 3/4 X 2 1/2 PLT

12.310-019H LOWER HITCH WELDMENT

13.805-015C PIN LYNCH 5/16 X 1 3/4

14.310-020S LOWER HITCH PIN

15.310-309H FDR2548 CW DECK WELDMENT

16.802-657C HFS 5/8-11 X 1 1/2 GR5

17.800-320C DRIVELINE HOOK HANGER W/HRDWR

Applies to FDR2560, FDR2572, FDR2584

17367

2.802-658C HFS 1/2-13 X 3 1/2 GR5

3.817-048C SPINDLE BUSHING

4.800-001C GREASE ZERK STRAIGHT 1/4-28

5.310-263S82 ASY. GAUGE WHEEL ARM ORANGE

5.310-293S82 ASSY. GAUGE WHEEL ARM ORANGE

6.805-126C PIN LYNCH 1/4 X 1 3/4 PLT

10.310-149H82 GW YOKE(5 1/8 INSIDE) ORANGE

10.315-300H82 11' GW YOKE 5 1/8X5 1/8 INSIDE ORANGE

Applies to FDR2560, FDR2572

13629

2.95352NA RPBY 53-182) MRTN BRG3/4,3.25L

Applies to FDR2584

10499

3.822-045C BEARING CONE #LM 11949

4.822-050C BEARING CUP #LM 11910

Applies to FDR2560, FDR2572

17714

Applies to FDR2548

19268

Applies to FDR2548

dwg19268 Drawing Image Number

1.802-656C HFS 1/2-13 X 3 GR5

2.802-015C RHSNB 3/8-16X1 GR5

4.817-048C SPINDLE BUSHING

5.800-001C GREASE ZERK STRAIGHT 1/4-28

7.805-126C PIN LYNCH 1/4 X 1 3/4 PLT

10.802-350C HHCS 1/2-20X6 1/2 GR5

12.804-015C WASHER LOCK SPRING 1/2 PLT

13.803-018C NUT HEX 1/2-20 PLT

14. 814-071C TIRE 4.10/3.50-4 TUBELESS AIR

14.814-188C TIRE 10X3.25 SOLID STRT RIB CR

Applies to FDR2548, FDR2560, FDR2572, FDR2584

17472

Applies to FDR2548, FDR2560, FDR2572, FDR2584

dwg17472 Drawing Image Number

1.800-001C GREASE ZERK STRAIGHT 1/4-28

2.803-114C NUT LOCK 3/4-16 NYLOC COLLAR

3.804-093C WASHER FLAT 3/4 HARD ASTMF436

6.822-161C BEARING 6206 W/ METAL SHIELD

7.310-457D BLADE HUB MACHINED TOP GREASE

12.804-110C WASHER BLADE 2ODX.56THKX.51ID

14.310-227D BLADE WASHER-90

18.803-115C NUT HEX 7/16-20 PLT

19.804-014C WASHER LOCK 7/16 PLT

21.802-229C HHCS 7/16-20X1 1/2 GR8

22.808-129C FLAT IDLER PULLEY 6 3/4 O.D.

23.802-151C HHCS 5/8-11X4 1/4 GR5

Belt Drive (continued)

Applies to FDR2548, FDR2560, FDR2572, FDR2584

This Page Intentionally Left Blank

Applies to FDR2548, FDR2560, FDR2572, FDR2584

20212

1.826-326C82 GB MOWER 50 HP 1:2.8 CW ORANGE

2.802-246C HHCS 5/8-18X1 3/4 GR5

3.310-410V82 GEARBOX MOUNT ASY ORANGE

3.310-411V82 GEARBOX MOUNT ASSEMBLY ORANGE

4.804-022C WASHER LOCK SPRING 5/8 PLT

5.803-022C NUT HEX 5/8-18 PLT

6.310-331D KEY 1/4 X 11/16 LONG

10.816-298C RUBBER PLUG 1 3/8 W/CROSS SLIT

Applies to FDR2548, FDR2560, FDR2572, FDR2584

17471

Applies to FDR2548, FDR2560, FDR2572, FDR2584

dwg17471 Drawing Image Number

1.802-053C HHCS 5/8-11X1 3/4 GR5

2.808-129C FLAT IDLER PULLEY 6 3/4 O.D.

3.807-068C SPRING EXT BELT HANDLE

4.802-668C EYE BOLT OPEN 3/8-16X3 1/2

5.803-014C NUT HEX 3/8-16 PLT

6.890-641C CHAIN WELD 1/4 PROOF X 3 LINK

7.804-019C WASHER FLAT 5/8 USS PLT

8.310-494D SPACER BUSHING

9.310-493D SPRING IDLER BRACKET

10.803-263C NUT HEX FLANGE LOCK 5/8-11 PLT

Applies to FDR2584

16020

Applies to FDR2560, FDR2572

16020

Applies to FDR2584

18705

2.804-009C WASHER LOCK SPRING 5/16 PLT

Applies to FDR2560, FDR2572

18705

Applies to FDR2572, FDR2584

19602

30.310-580D OMNI OUTPUT SPACER 27mm

45.310-581D OMNI OUTPUT SHAFT SHIM 2mm

46. 310-582D OMNI HOUSING TAKE-UP SPACER

Applies to FDR2548, FDR2560, FDR2572, FDR2584

30000

Applies to FDR2548, FDR2560, FDR2572, FDR2584

dwg30000 Drawing Image Number

826-326C GBOX MOWER 50 HP 1:2.8 CW

1.8.6.5.00006 CO OIL PLUG 3/8

2.8.1.1.00501 CO BOLT M8X22 HHB

3. 0.195.1300.00 CO COVER

4.0.195.2000.00 CO INPUT SHAFT 1" 3/8 Z6

6.8.5.2.00131 CO SNAP RING INT 72 UN17437

7.A.248.500 COMER SHIM KIT 71.7

8.8.0.9.00026 CO ROLLER BEARING 30207 CL-B

9.8.5.1.00680 CO SNAP RING 40 UNI 7436

10.0.259.7525.00 CO SHIM 35.3 X 48 X 2.5

11. 0.195.0300.00 CO HOUSING

12.8.0.9.00102 CO ROLLER BEARING 32208 CL-B

13.0.278.7103.00 CO NUT M40 X 1.5

14.8.7.3.00081 CO OIL SEAL 35 X 80 X 10 RTA35

15.1.195.7100.00 CO PROTECTIVE FLAT WASHER

16.8.5.3.00955 CO SNAP RING SB 81

17.8.3.2.00409 CO FLAT WASHER 25 X 44 X 4

18.8.2.2.01144 NUT CASTLE M 24 X 2

19.8.4.7.00516 CO COTTER PIN B5 X 50

20.A244.501 CO SHIM 40.3 X 51.5 826-067C

21.0.195.5000.00 CO PINION Z12 M4.7

22.822-166C BEARING BALL 6207

23.8.7.3.00055 CO OIL SEAL 35 X 72 X 10

24.0.195.6000.00 CO CROWN GEAR Z33 M4.7

25.U0.195.7101.00 CO OIL LEVEL PLUG 3/8" GAS

Applies to FDR2548, FDR2560, FDR2572, FDR2584

15220

21.818-552C DECAL DANGER PTO DRIVELINE

22.818-540C DECAL DANGER GUARD MISS PTO

Applies to FDR2548, FDR2560, FDR2572, FDR2584

21269

Applies to FDR2548, FDR2560, FDR2572, FDR2584

17473

Label Placement

Applies to FDR2548, FDR2560, FDR2572, FDR2584

dwg17473 Drawing Image Number

310-304A FDR2560 DECAL SHIPOUT BUNDLE

310-305A FDR2572 DECAL SHIPOUT BUNDLE

310-306A FDR2584 DECAL SHIPOUT BUNDLE

310-308A FDR2548 DECAL SHIPOUT BUNDLE

1.818-560C DECAL NOTICE TO OWNER-NO WARRA

2.818-558C DECAL WARNING GEN SAFE MOWER

3.818-543C DECAL DANGER PD GUARD MISS SML

4.818-130C DECAL CAUTION 540 RPM

5.838-302C DECAL FDR2548-BROWN

6.818-555C DECAL DANGER ROTATE BLADE

8.818-556C DECAL DANGER THROWN OBJ CUTTER

10.818-552C DECAL DANGER PTO DRIVELINE

12.818-298C DECAL GREASE 25HRS BLACK/WHITE

13.818-138C DECAL GREASE EVERY 25 HOURS

15.818-230C DECAL RED REFLECTOR

16.838-063C DECAL DRIVELINE 826-273C

17.818-540C DECAL DANGER GUARD MISS PTO

18.818-142C DECAL DANGER PTO DRIVELINE

Applies to FDR3590

15930

4.315-409H82 FDR3590 GEARBOX CHANNEL ORANGE

9.315-562D GEAR BOX CHANNEL SPACER

10.804-021C WASHER FLAT 5/8 SAE PLT

11.804-022C WASHER LOCK SPRING 5/8 PLT

12.802-100C HHCS 5/8-11X4 1/2 GR5

13.816-004C VINYL SEAL 3/8 X 1/2/FT

Applies to FDR3590

15929

2.310-375D FDR1572-60 UPPER HITCH BAR

3.310-425D FDR UPPER HITCH BRACE

6.804-022C WASHER LOCK SPRING 5/8 PLT

7.803-022C NUT HEX 5/8-18 PLT

8.805-143C PIN HAIR COTTER .120 PLT

9.805-142C PIN CLEVIS 3/4 X 3 1/2 PLT

10.802-246C HHCS 5/8-18X1 3/4 GR5

11.803-114C NUT LOCK 3/4-16 NYLOC COLLAR

12.310-020S LOWER HITCH PIN

13.310-125H LOWER HITCH LUG 1560

14.805-015C PIN LYNCH 5/16 X 1 3/4

15.802-321C HHCS 3/4-16X2 1/2 GR5

16.802-207C HHCS 5/8-18X1 1/2 GR5

17.310-221H FDR3590 MOWER DECK WELD

17.310-221H82 FDR3590 MOWER DECK WLD ORANGE

Applies to FDR3590

13631

Applies to FDR3590

15931

5.890-202C GAUGE WHEEL SFT PIVOT BUSHING

6.800-001C GREASE ZERK STRAIGHT 1/4-28

7.310-224H82 FDR3590 REAR G.W. MOUNT ORANGE

8.802-305C HHCS 1/2-20X8 GR5

9.310-090H82 90 GAUGE WHEEL YOKE ORANGE

10.804-015C WASHER LOCK SPRING 1/2 PLT

11.803-018C NUT HEX 1/2-20 PLT

16.310-223H82 FDR3590 FRONT GW MOUNT ORANGE

17.802-091C HHCS 1/2-13X1 1/4 GR5

18.804-016C WASHER FLAT 1/2 SAE PLT

Applies to FDR3590

15933

Applies to FDR3590

dwg15933 Drawing Image Number

1.826-213C DRIVELINE CAT 4 W/O CLUTCH 33

2.818-783C DECAL 826-213C DRIVELINE

3.310-230S DRIVELINE 826-213CW/OCLUTCH 33

5.310-331D KEY 1/4 X 11/16 LONG

7.804-029C WASHER FLAT 1 SAE

8.803-095C NUT HEX SLOTTED 1-14

9.805-017C PIN COTTER 3/16 X 1 3/4 PLT

10.315-341V AFM4522 CW GEAR BOX SUB

11.802-246C HHCS 5/8-18X1 3/4 GR5

12.804-022C WASHER LOCK SPRING 5/8 PLT

13.803-022C NUT HEX 5/8-18 PLT

14.803-114C NUT LOCK 3/4-16 NYLOC COLLAR

16.804-093C WASHER FLAT 3/4 HARD ASTMF436

19.822-162C BEARING 6007 W/ METAL SHIELD

22.822-096C # 107 BEARING SINGLE SEAL

24.802-229C HHCS 7/16-20X1 1/2 GR8

25.802-281C HHCS 5/8-11X2 3/4 GR5

26.804-022C WASHER LOCK SPRING 5/8 PLT

27.808-107C PULLEY IDLER 9 OD

31.310-225H FDR3590 BLADE MOUNT BAR

32.310-227D BLADE WASHER-90

33.803-115C NUT HEX 7/16-20 PLT

34.804-014C WASHER LOCK 7/16 PLT

38.802-329C HHCS 1/2-20X1 3/4 GR5

40.804-015C WASHER LOCK SPRING 1/2 PLT

Applies to FDR3590

15932

Applies to FDR3590

dwg15932 Drawing Image Number

1.803-022C NUT HEX 5/8-18 PLT

2.804-022C WASHER LOCK SPRING 5/8 PLT

4.310-049D IDLER PULLEY SPACER

5.808-107C PULLEY IDLER 9 OD

6.803-024C NUT LOCK 5/8-11 PLT

7.310-093H TAKE-UP PULLEY MTG-90

8.310-256D IDLER SLIDE SPACER

9.802-306C RHSNB 5/8-11X1 1/4 GR5

10.807-050C SPRING EXT 1 13/32 X 6 EXT

12.310-095H SPRING EYE-BOLT BRACKET

13.803-014C NUT HEX 3/8-16 PLT

14.800-099C SNAP RING EXT 7/16

15.310-094H OVER-CENTER LATCH-90

Applies to FDR3590

15934

Applies to FDR3590

18706

Applies to FDR3590

30000

Applies to FDR3590

dwg30000 Drawing Image Number

826-326C GBOX MOWER 50 HP 1:2.8 CW

1.8.6.5.00006 CO OIL PLUG 3/8

2.8.1.1.00501 CO BOLT M8X22 HHB

3. 0.195.1300.00 CO COVER

4.0.195.2000.00 CO INPUT SHAFT 1" 3/8 Z6

6.8.5.2.00131 CO SNAP RING INT 72 UN17437

7.A.248.500 COMER SHIM KIT 71.7

8.8.0.9.00026 CO ROLLER BEARING 30207 CL-B

9.8.5.1.00680 CO SNAP RING 40 UNI 7436

10.0.259.7525.00 CO SHIM 35.3 X 48 X 2.5

11. 0.195.0300.00 CO HOUSING

12.8.0.9.00102 CO ROLLER BEARING 32208 CL-B

13.0.278.7103.00 CO NUT M40 X 1.5

14.8.7.3.00081 CO OIL SEAL 35 X 80 X 10 RTA35

15.1.195.7100.00 CO PROTECTIVE FLAT WASHER

16.8.5.3.00955 CO SNAP RING SB 81

17.8.3.2.00409 CO FLAT WASHER 25 X 44 X 4

18.8.2.2.01144 NUT CASTLE M 24 X 2

19.8.4.7.00516 CO COTTER PIN B5 X 50

20.A244.501 CO SHIM 40.3 X 51.5 826-067C

21.0.195.5000.00 CO PINION Z12 M4.7

22.822-166C BEARING BALL 6207

23.8.7.3.00055 CO OIL SEAL 35 X 72 X 10

24.0.195.6000.00 CO CROWN GEAR Z33 M4.7

25.U0.195.7101.00 CO OIL LEVEL PLUG 3/8" GAS

Applies to FDR3590

16074

20.818-552C DECAL DANGER PTO DRIVELINE

21.818-540C DECAL DANGER GUARD MISS PTO

Applies to FDR3590

17597

Label Placement

2.818-540C DECAL DANGER GUARD MISS PTO

3.818-783C DECAL 826-213C DRIVELINE

4.818-552C DECAL DANGER PTO DRIVELINE

5.818-230C DECAL RED REFLECTOR

6.818-138C DECAL GREASE EVERY 25 HOURS

9.818-555C DECAL DANGER ROTATE BLADE

10.818-556C DECAL DANGER THROWN OBJ CUTTER

13.818-558C DECAL WARNING GEN SAFE MOWER

14.818-560C DECAL NOTICE TO OWNER-NO WARRA

15.818-229C DECAL AMBER REFLECTOR

16.818-130C DECAL CAUTION 540 RPM

17.818-298C DECAL GREASE 25HRS BLACK/WHITE)

20.818-142C DECAL DANGER PTO DRIVELINE EN

21.838-517C DECAL QUICK HITCH SYSTEM

Applies to FDR3590

16570

2.315-313H 4522 FRONT ROLLER SHAFT

5.817-049C 4 X 10 ROLLER WHEEL

Table of Contents Part Number Index

Part Number Index

The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on.

Table of Contents Part Number Index

Part Number Index (continued)

Great Plains Manufacturing, Inc.

Corporate Office: P.O. Box 5060

Salina, Kansas 67402-5060 USA

www.landpride.com