1. Read Instructions

All the safety and operating instructions should be read before the product is operated.

2. Follow Instructions

All operating and use instructions should be followed.

3. Retain Instructions

The safety and operating instructions should be retained for future reference.

4. Heed Warnings

All warnings on the product and in the operating instruc- tions should be adhered to.

5. Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Water and Moisture

Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.

7. Accessories, Carts, and Stands

Do not place this product on a slippery or tilted surface, or on an unstable cart, stand, tripod, bracket, or table. The product may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recom- mended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufac- turer???s instructions, and should use a mounting accessory recommended by the manufacturer.

8. Transporting Product

A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

9. Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

10. Ventilation

Slots and openings in the cabinet are provided for ventila- tion and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer???s instructions have been adhered to.

11. Power Sources

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, con- sult your product dealer or local power company. For prod- ucts intended to operate from battery power, or other sources, refer to the operating instructions.

12. Power-Cord Polarization

This product is equipped with a polarized alternating-cur- rent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety pur- pose of the polarized plug.

13. Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

(Continued from previous page)

14. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded to provide protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (U.S.A.), ANSI/ NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna- discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Example of Grounding According to National Electrical Code Instructions

Art 250, Part H)

NEC - National Electrical Code

openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

19. Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. Damage Requiring Service

Unplug this product from the wall outlet and refer servic- ing to qualified service personnel under the following con- ditions:

a.If the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the product.

c.If the product has been exposed to rain or water.

d.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e.If the product has been dropped or the cabinet has been damaged.

f.If the product exhibits a distinct change in perfor- mance.

15. Lightning

For added protection for this product (receiver) during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

16. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

17. Overloading

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

18. Object and Liquid Entry

Never push objects of any kind into this product through

21. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the origi- nal part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

22. Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condi- tion.

23. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer. The product may slide or fall, causing serious injury to a child or adult, and seri- ous damage to the product.

24. Heat

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

ANT IN +75 ???

RF Connector: Antenna

Used to connect analog cable or antenna signals to the television, either directly or through your cable box.

S-VIDEO In

A connection available with some high-end equipment that provides even better picture quality for Video 2.

Video 1 or 2

Connects the video sig- nals from various types of equipment.

Left/Right Audio

Used for stereo sound from various types of equipment.

Monitor Out

Connects to a second TV or Monitor.

Y, Pb, Pr

DVD Component Video and HD

Component Video

Some top-of-the-line DVD players use what is called ???component video,??? for extremely accurate picture reproduction. Refer to your DVD manual for further information.

There are four jacks on the left side on your projection TV that make connecting Audio/Video devices like video games and cam- corders very simple.

The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the front con- nection panel.

To use the front jacks as the signal source, select them using Main Input menu as described on page 25. They will be named ???Front Video??? in the Main Input menu.

If you input both Front Video and S-

Video, only the S-Video will work.

If you???re connecting a video game device, make sure to change the picture settings with the EZ Picture option in the Video menu (see page 29).

ANT / Cable Service Hookup

ANT IN +75 ???

If you receive your RF signal through an antenna that is several years old and connects with two small prongs, you will need to pur- chase a 300 to 75 ohm adapter. It should be available from your local electronics dealer.

We recommend using a 75 ohm cable for your antenna connections in order to prevent

interference.

MONO

VIDEO

(L)

AUDIO

(R)

Or find the composite video and audio jacks on the back of your cable box, and connect them following the instructions provided with your equipment.

This can be combined with any other equipment you may want to hook up.

Cable TV

Wall Jack Panel

ANT IN +75 ???

S-VIDEO

Find the audio and component or 1 S-Video jacks on the back of your DVD Player and connect them fol-

lowing the instructions provided with your equipment.

You may connect either the com- posite video or the S-Video cables to your TV. Do not connect both the composite and the S-Video.

Some high-end DVD players use a picture reproduction system called ???component video.??? If your DVD player has component output, use the connectors marked ???Component 1/2??? on the jack panel. Please refer to your DVD manual for proper installa- tion.

DVD Player

Back AV Panel

A/V Cables Not included with TV

RGB INPUT

DTV/DVD INPUT

Component 1 (or 2) Input

Y PB PR

1920X1080i

1280X720p

720X480p

720X480i

???Component Input ports

Connect DVD player jacks to Monitor Component input jacks as indicated below.

RGB-DTV/DVI-DTV Input

The DTV shows the sharpest picture in 720p mode.

DBS Receiver

DBS Receiver

DTV/DVD INPUT

Select RGB-PC Source and press ENTER. Use UP/DOWN arrows to select the desired options (H-Position/V-Position/H-Size/V- Size/Phase) and then use LEFT/RIGHT arrow to make appropriate adjustments.

-Horizontal position, Vertical position, Horizontal size, and Vertical size: Based on the input mode (resolution), the adjustment ranges may change.

-PHASE: Removes any horizontal noise and clears up or sharpens the character images. Adjustment range is -15 ~ + 15.

In DVI-PC mode, adjustments are only Vertical size, and Horizontal size.

In RGB-PC/DVI-PC modes, for POP or Twin screen, H- Position/V-Position/H-Size/V-Size/Phase are not adjustable.

Synchronization input form: Signals are separate.

P A G E 1 4

DTV/DVD INPUT

RGB-PC/DVI-PC Input

1

2

3

Connect Left/Right Variable Audio Output to an external Audio Amplifier System.

Locate both Variable Audio Out jacks on the back of your TV and the Left/Right audio input jacks on the back of your stereo's amplifier.

Connect these jacks, making sure that they are connected correctly. (red=Right, white=Left.)

Adjust the sound on your stereo, according to directions provided with the amplifier.

ANT IN +75 ???

DTV/DVD INPUT

A/V cables not included with TV

This is a typical speaker layout. Any number of other speaker setups are possible, and some changes may be needed to maximize your sound. However, a Dolby Digital Receiver is required to hear 5.1 channel audio.

Left and right speakers on each side of the TV enhance separation. The TV's sound optional hookup ???center mode in,??? makes the dialog sound as though it???s coming directly from the TV. The rear surround sound speakers provide

the majority of other sounds, like those from special effects in movies. Your sub-woofer generates ultra-low frequency sound, for rumbling low-end audio.

1

2

Your TV has a special signal output capa- bility which allows you to hook up a sec- ond TV or monitor.

Just connect the second TV or monitor to the MONITOR OUT Audio/Video jacks locat- ed on the back of your TV. See the Operating Manual of the second TV or monitor for further details regarding that device???s input settings.

ANT IN +75 ???

DTV/DVD INPUT

Component 1 - 2, RGB-DTV/PC, and DVI-DTV/PC input sources for main picture cannot be used for Monitor Out.

Second TV

S-Video Video Audio

A/V Cables Not included with TV

P A G E 1 7

Remote Control Functions in TV Mode

MODE

Selects the remote operating mode: TV, VCR, Cable, DVD and Satellite. Select other operating modes, for the remote to control external devices.

TV/VIDEO

Selects: Analog, Video1, Video2, Front video, Component1-2, RGB, and DVI input sources.

FRONT

Selects the front video signal if a device, such as a camcorder or game player, is connected to the front video input jack.

MUTE

Switches the sound on or off

SAP

Selects: Mono, Stereo, and SAP.

PIP

Toggles between PIP, POP (Picture-outside-Picture) and Twin picture mode.

PIPCH-

Changes to next lower

PIP channel

THUMBSTICK

Allows you to navigate the on-screen menus and to adjust the system set- tings and preferences, by moving to an option withF ED G and selecting the highlighted option with .

MENU

Brings up the main menu to the screen.

1 2 3

4 5 6

7 8 9

MUTE

PLAY PAUSE STOP RECORD

REW FF

SKIP

INDICATOR LIGHTS

Show active remote mode every time any button is pressed.

LIGHT

Illuminates the remote control keys.

DVI

Selects: DVI-DTV and DVI-PC input sources.

SURF

Scrolls the Surf channel list.

VIDEO

Adjusts the factory preset pic- ture according to the room.

SWAP

Switches the picture from PIP, POP, or twin picture to the main screen.

PIPCH+

Changes to next higher PIP channel.

FREEZE

Captures and freezes the currently- viewed main picture.

EXIT

Clears all on-screen displays and returns to TV viewing from any menu.

COMPONENT 1, 2

Selects component signal sources, such as DVD or HD receiver.

NUMBER KEYPAD

For direct channel selection and programming functions.

ENTER

When in the menu system and other on-screen displays, selects highlighted options.

VOLUME UP/DOWN

Increases/decreases the sound level.

RATIO

Changes the screen format or aspect ratio.

CC

Selects a closed caption mode for displaying captioning information if available on program.

RECORD, PAUSE, REW, FFWD,

PLAY, STOP

Control the functions on your VCR.

MODE LIGHT POWER

TV/VIDEO FRONT DVI

COMP1 COMP2 RGB

PLAY PAUSE STOP RECORD

REW FF

SKIP

POWER

Turns your TV or any other programmed equipment on or off, depending on mode.

RGB

Selects: RGB-DTV and RGB-PC input sources.

FLASHBK

Tunes to the last channel viewed.

CHANNEL UP/DOWN

Scrolls through available chan- nels in EZ Scan memory.

PIP INPUT

Selects the input source for the sub picture.

ENTER

When in the menu system and other on-screen displays, selects highlighted options.

SKIP

Playing CDs: Selects songs.

Playing DVDs: Selects movie chapters.

TV 6

PIP Display

This display appears when PIP is active.

10

AM 3:00

Mute

Appears when sound is muted.

Volume

Volume level is displayed while adjusting the sound.

Time

Appears when pressing the enter button.

1

2

3

4

5

6

7

8

POWER

MENU

ENTER (Same as ENTER button on your remote control)

VOLUME UP / DOWN

CHANNEL UP / DOWN

Operation indicator. (See page 6).

Lamp indicator. (See page 6).

Temperature indicator. (See page 6).

See menu pages for instructions on using the on- screen menus.

The POWER, CHANNEL, TV/VIDEO, and VOLUME but- tons work just as they do on your remote control.

If TV is moved from cold to normal room tempera- ture, humidity may form inside TV, wait 3 hours for TV to adjust to room temperature before turning it on.

EZ Scan (Channel Search)

Automatically finds analog channels available through ANT IN input, and stores all active over-the-air and cable channels in memory on the channel list.

so, plug in your TV to a standard (non- switched) 120V 60Hz power outlet.

4/6

5/7

SPECIAL

LOCK MENU Prev.

MENU Previous

Create two different types of channel lists in memory: ???Custom list??? and ???Surf list???.

A custom list can be created by toggling each channel on or off with (Enter). Once a channel is highlighted, you will be able to see whether the channel is currently added or deleted by referring to the small window at the top-left cor- ner of the screen.

You can create your own Surf list with up to 16 channels. It appears at the bot- tom-left corner of the screen.

Press the Surf button on the remote control when a channel is highlighted to add or delete the channel in the Surf list.

MODE LIGHT POWER

TV/VIDEO FRONT DVI

COMP1 COMP2 RGB

1

2

3

4

5

You will now see a screen filled with channel numbers and a preview picture. Use the UP/DOWN and LEFT/RIGHT arrow to select a channel, then use ENTER to Delete (remove the channel from the channel scan) or Add (include the chan- nel in the channel scan). Press SURF to add the channel to the Surf List.

Press EXIT to save and return to TV view- ing or press MENU to save and return to the previous menu.

4

1/3/4

2/3/4

5

Channel Labels Setup

SPECIAL

LOCK MENU Prev.

Choose preset labels for your channels.

Use Channel +/- on your remote control in the Ch. Label menu to select a channel for labeling, then choose a suitable label for the channel by pressing to attach the label to the selected channel.

Main Picture Source Selection

Changes the picture source for the main screen so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.

P A G E 2 5

Using the menu

Each time you press PIP INPUT button, you toggle between Ant/Cable, Video 1, Video 2, and Front Video.

Do not display a fixed image on the screen for long periods of time. Doing so may cause image burn-in.

Not all sources are available for PIP.

1

2

Press the PIP button on the remote control to select PIP or Twin picture mode. Select the Ant/Cable source with the PIP INPUT button.

Use the PIPCH-/PIPCH+ button to select a channel for the sub picture.

1

2

Press PIP button on the remote control with the POP image on the screen to acti- vate POP (Picture-outside-Picture) mode. The pictures of all the programmed chan- nels are searched with the 3 POP screen, as shown to the right.

???Press SWAP, to enlarge the selected channel being searched on the POP screen to view it on the Main screen. (It???s available to use this function in Ant/Cable input source for Main and Sub picture.)

Press the EXIT button to exit POP mode.

If TV signal reception is poor because you are in a fringe area, set Booster to On. If the picture condition is good, set Booster to Off.

Adjustments for one channel don???t affect the adjustment for other channels. Set booster to on or off for each channel separately.

return to the previous Menu.

Video Menu Options

Adjust the picture appearance to suit your preference and viewing situations.

1

2

3

4

5

Press the MENU button on the remote con- trol, then use the UP/DOWN arrow button to select the Video menu.

Press ENTER or the RIGHT arrow button to access the Video menu.

Use the UP/DOWN arrows to select one of the following options: EZ Picture (Off, Daylight, Normal, Night Time, Movie, Video Game, or Sports), Contrast, Brightness, Color, Sharpness, Tint, Color Temperature (Warm, Medium, Cool), and XD. Then press ENTER or the Right arrow button.

Use the LEFT/RIGHT arrows to adjust the option to your preference (Contrast, Brightness, Color, Sharpness, Tint).

Use the UP/DOWN arrows to set the option to your preference (EZ Picture, Color Temperature, XD).

Press EXIT to save and return to TV viewing or press the ENTER button to save and return to the previous menu.

You can manually adjust the levels for the picture quality settings, such as Contrast, Brightness, Color, etc.

You can also select a preset value from the EZ Picture menu based on the category of the program.

P A G E 2 9

Audio Menu Options

Adjust the sound to suit your taste and room situations.

save and return to the previous menu.

P A G E 3 1

Auto Clock Setup

Sets the time automatically from the PBS broadcast sig- nal.

The PBS channel signal includes information for the cor- rect time.

3

1/3

2/3

P A G E 3 3

Manual Clock Setup

P A G E 3 4

TV Turn Off Timer Setup

Lets you set an automatic daily turn off time for your TV.

Off Timer function overrides On Timer function if they are both set to the same time.

To cancel Off Timer function, use the UP/DOWN arrow button to select Off in step 4.

P A G E 3 5

TV Turn On Time Setup

Time function operates only if current time is set.

Unless a button is pressed within two hours after the TV is turned on by the On timer function, the TV will auto- matically turn itself off.

P A G E 3 6

Sleep Timer Setup

Select a preset time to turn your TV off automatically.

If you turn the TV off after setting sleep timer, the setting will be erased. Set it again if necessary.

MODE LIGHT POWER

TV/VIDEO FRONT DVI

COMP1 COMP2 RGB

1 2 3

4 5 6

7 8 9

2/5ENTER 0 FLASHBK

1/3/4

2/3

P A G E 3 7

Auto Off

If there is no input signal, the TV can be set up to switch to standby mode automatically after 10 minutes.

P A G E 3 8

1/3/4

2/3

Aspect Ratio

SPECIAL

LOCK MENU Prev.

Lets you choose the way that an analog picture with a 4:3 aspect ratio is displayed on your TV 16:9 aspect ratio TV screen. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed according to your preference.

1/3/4

2/4

P A G E 3 9

On-Screen Menu Languages

Select your preferred language for the menus: English, Spanish, or French.

menu. Use the UP/DOWN arrow button to select the language you wish to use for your on-screen menus.

P A G E 4 0

1/3/4

2/4

Captions Setup

EZ Mute, and On.

Using the CC button

Each press of the CC button changes the caption option; Off, EZ Mute, and On. Captions Setup is complete.

EZ Mute shows the selected captions option (if available on program) when the TV sound is muted.

2

Press EXIT to save and return to TV viewing.

1/3/4

2/3

P A G E 4 1

Caption/Text Mode Selection

Select a closed caption mode for displaying captioning information when provided on the program.

Captions displays information at any position on the screen usually the program's dialog.

Text displays information, usually at the bottom position and is used for a data service, generally not program related.

CC 2, CC 3, CC 4, Text 1, Text 2, Text 3, and

Text 4.

P A G E 4 2

1/3/4

2/3

Key Lock

The TV can be set up so that it can only be used with the remote control.

The feature can be used to prevent unauthorized viewing by disabling the front panel controls.

The TV is programmed to remember which option it was last set to even if you turn the TV off.

save and return to the previous menu.

1/3/4

2/3

P A G E 4 3

Cinema Mode Setup

Set up the TV for the best picture appearance for viewing movies.

When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in Component 480i mode.)

P A G E 4 4

1/3/4

2/3

Demo (Menu Review)

EZ Demo Use to scan the features and menu options available on your TV.

XD Demo Use to see the difference between XD Demo On and XD Demo Off.

1/3/4

2/3/4

P A G E 4 5

Parental Lock Setup

Lets you set up blocking schemes to block specific chan- nels, ratings and external sources.

A password is required to gain access to this menu if the Lock System is active.

Press ENTER or the RIGHT arrow button to 2 access the Lock Menu. The TV is set up

with the initial password 0000.

???Lock System: Activates or disables the block- ing scheme you set up previously.

???Set Password: Changes the password by key- ing in a new password twice.

???Movie Rating: Blocks movies according to the movie ratings limit, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movie shown on TV, not TV programs, such as soap operas.

???TV Rating-Children: Keeps children from watching certain TV programs among only the programs intended for children, according to the ratings limit. This rating does not apply to other TV programs. Unless you block cer- tain TV programs intended for mature audi- ences in the TV Rating - General menu, your children may view those programs.

???TV Rating-General: Blocks certain TV pro- grams that you and your family do not want to watch, based on the ratings.

???Block Ch.: Blocks any channels that you do not want to watch or that you do not want your children to watch.

???Aux. Block: Enables you to select a source for blocking among the source devices you have hooked up.

If you forget your password,

enter the number, 7777 to release the lock mode.

P A G E 4 6

SPECIAL

LOCK G

1/3

2

Programming the Remote

The remote control for your HD receiver is a multi-brand or universal remote control that can be programmed to operate most remote-control- lable devices of other manufacturers.

Note: The remote control may not be able to con- trol all models of other brands.

2

4

3

MODE LIGHT POWER

TV/VIDEO FRONT DVI

COMP1 COMP2 RGB

1 2 3

4 5 6

7 8 9

PLAY PAUSE STOP RECORD

REW FF

SKIP

3

4

5

Snowy picture and unclear sound.

???Check your antenna connection or location.

???Check your cable input.

???Check to see if the TV/VCR button on your VCR has the TV selected.

Interference: Sharp lines across the screen and unclear sound.

The following may cause image problems or distortion: Electrical appliances, powerful lights, cars, trucks; computers or portable phones; medical equipment

??? If possible increase the distance between your TV and the offending appliance. Or shut one of them off.

Normal picture but no sound.

???Check sound level.

???Make sure the TV sound is not muted.

???Try another channel. The problem may be the broadcast, not your TV.

???Are the Audio cables properly installed?

???Are the wires for external speakers (if you have external speakers) properly installed?

???Make sure your speakers are turned on in the Audio menu.

???If your audio mode is set to SAP, that channel may not have an SAP program.

No picture and unclear sound.

???Are you in TV or cable tuning mode, and should be in the other?

???Make sure output channels on all A/V equipment are on the same channel (3 or 4).

???Check that all connections are tight.

No picture and no sound.

???Is the AC power cord plugged in?

???Check that your AC power outlet works. (Test it by plugging in something else or try another outlet.)

???Make sure your brightness and audio controls are set properly.

???Try another channel. The problem may be with the broadcast.

No color, but the sound is O.K.

???Check the color settings in the Video menu.

???Try another channel. The problem may be with the broadcast.

Picture has a big black box on it, but the sound is O.K.

???The Caption option may be in Text mode. Select Caption 1, or OFF in the Captions/Text menu.

Picture has two horizontal black bars, one on top and one on bottom.

???Your program is in letterbox. This means that the shape of your TV is a square, but the program is a rectangle. Think of the bars as empty space the program doesn???t fill; not picture that???s blocked out. Because this format is a

direct representation of film as you see it in the movies, you are actually seeing MORE of the program when you see those bars.

Weak or no Stereo Sound when using a stereo VCR.

???Check to see if all the connections are secure.

???Look in the Audio mode menu to see if all the settings are correct.

???You are using channel 3 or 4 to view your VCR. No stereo sound is present under that decision.

The PIP inset is black or lacks contrast.

???Check to be sure that the PIP source is turned on.

???You might want to adjust the PIP picture settings under the PIP menu.

???Check that all the wires are connected properly.

???Check to see if your input source for PIP is set correctly.

The PIP inset is ???snow??? when the source is Antenna.

??? Look to see if the TV/VCR button on your VCR has the TV selected or change the PIP to another source.

DVD

DVI INPUT

DTV

DTV FORMATS

480I

480p

720p/1080i

Optical disc storage technology. Digital video disc player. A disc that contains movies etc. in digital format.

Digital video interface. Video multimedia standard for computer text and graphics.

Digital television source, (set-top box).

Standard DTV format.

Enhanced DTV format. (Progressive Scan). (HDTV) High definition video formats.