ENGLISH
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
Please read this manual carefully before operating your TV.
Retain it for future reference.
Record model number and serial number of the TV. Refer to the label on the back cover and quote this information.
To your dealer when requiring service.
This feature is not available for all models.
(Except for 19/22LS4D*)
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
??? Image shown may differ from your TV.
Owner's
Manual
Owner???s manual
or
R ATI
Power Cord
or
Protection Cover
This feature is not available for all models.
Polishing Cloth
Polishing cloth for use on the screen.
Lightly wipe any stains or fingerprints on the surface
(Except for 19/22LS4D*)
of the TV with the polishing cloth.
Do not use excessive force. This may cause scratching or discolouration.
ACCESSORIES
PLASMA TV models
LCD TV models
1
CONTENTS
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . 21 Digital Audio out Setup . . . . . . . . . . . . . . . . . . . . . 22 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . 27 Insertion of CI Module . . . . . . . . . . . . . . . . . . . . . . 28 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
- Screen Setup for PC Mode . . . . . . . . . . . . . . . 32
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions . . . . . . . . . . . . . . . . 36 Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Programme Selection . . . . . . . . . . . . . . . . . . . . . . . 42 Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 42
2
Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
CI Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Selecting the Programme Table . . . . . . . . . . . . . . . 55
SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
EPG (ELECTRONIC PROGRAMME
GUIDE) (IN DIGITAL MODE)
Switch On/ Off EPG . . . . . . . . . . . . . . . . . . . . . . . . 60 Select Programme . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Button Function in NOW/NEXT Guide Mode . . . . . 61 Button Function in 8 Day Guide Mode . . . . . . . . . . 61 Button Function in Date Change Mode . . . . . . . . . . 61 Button Function in Extended Description Box . . . . . 62 Button Function in Record/Remind Setting Mode . . 62 Button Function in Schedule List Mode . . . . . . . . . . 62
PICTURE CONTROL
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . 63
Preset Picture Settings
- Picture
- Auto Colour Tone Control (Warm/Medium/Cool) . . . . 66
Manual Picture Adjustment
- Picture
- Picture
Picture Improvement Technology . . . . . . . . . . . . . . . . . 69
Advanced - Film Mode . . . . . . . . . . . . . . . . . . . . . . 70
Advanced - Black(Darkness) Level . . . . . . . . . . . . . 71
Eye Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Image Sticking Minimization (ISM) Method . . . . 74
Power Saving Picture Mode . . . . . . . . . . . . . . . . . . 75
SOUND & LANGUAGE CONTROL
Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 76 Preset Sound Settings - Sound Mode . . . . . . . . . . 77 Sound Setting Adjustment - User Mode . . . . . . . . . . 78 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . . 80 Selecting Digital Audio Out . . . . . . . . . . . . . . . . . . 81 Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 I/II
- Stereo/Dual Reception (In Analogue Mode Only) . . . . 83 - NICAM Reception (In Analogue Mode Only) . . . . . . . 84 - Speaker Sound Output Selection . . . . . . . . . . 84
DIGITAL TELETEXT
Teletext within Digital Service . . . . . . . . . . . . . . . 97 Teletext in Digital Service . . . . . . . . . . . . . . . . . . 97
CONTENTS
TIME SETTING
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Auto On/ Off Timer Setting . . . . . . . . . . . . . . . . . . 88
Auto
Time Zone Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . 90
PARENTAL CONTROL / RATINGS
Set Password & Lock System . . . . . . . . . . . . . . . . . 91
Block Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
TELETEXT
Switch On/ Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Special Teletext Functions . . . . . . . . . . . . . . . . . . . . 96
3
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
???Image shown may differ from your TV.
???If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.
PLASMA TV Models : 42/50PG20**, 42/50/60PG30**
Remote Control Sensor
POWER
Power/Standby Indicator
??? illuminates red in standby mode.
??? illuminates green when the TV is switched on.
PLASMA TV Models : 42/50PG10**
4
LCD TV Models :
26/32/37/42LG30**, 32/37/42/47/52LG50**
POWER
Remote Control Sensor
Power/Standby Indicator
???illuminates red in standby mode.
???illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in the OPTION menu.
+
VOLUME
-
OK
OK
MENU
MENU
INPUT
INPUT
Intelligent Sensor
Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG50** only)
PREPARATION
Attaching the TV to a desk (Only 26/32/42LG30**, 32/42LG50**)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
(provided as parts of the product)
Desk
! WARNING
GTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
5
PREPARATION
PREPARATION
LCD TV Models : 19/22LG30**
POWER
Remote Control Sensor
Power/Standby Indicator
??? illuminates red in standby mode.
??? illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in the OPTION menu.
LCD TV Models : 19/22LS4D*
Remote Control Sensor
Power/Standby Indicator
??? illuminates red in standby mode.
??? illuminates green when the TV is switched on.
6
BACK PANEL INFORMATION
A Image shown may differ from your TV.
PLASMA TV Models :
42/50PG10**, 42/50PG20**, 42/50/60PG30**
1
5
HDMI/DVI IN
Only 42/50PG10**
HDMI IN
3
2
1
HDMI/DVI IN
10
AV IN 3
PREPARATION
1Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
2RGB/DVI Audio Input
Connect the audio from a PC or DTV.
3OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
4Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
5HDMI Input
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
6RGB Input
Connect the output from a PC.
7
Connect to the
8Component Input
Connect a component video/audio device to these jacks.
9Antenna Input
Connect RF antenna to this jack.
10PCMCIA (Personal Computer Memory Card International Association) Card Slot
(This feature is not available in all countries.)
11SERVICE ONLY PORT
12Audio/Video Input (Except for 42/50PG10**)
Connect audio/video output from an external device to these jacks.
Connect
7
PREPARATION
PREPARATION
8
1Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
2RGB/DVI Audio Input
Connect the audio from a PC or DTV.
3DIGITAL AUDIO OUT OPTICAL
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
4Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
5HDMI Input
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
6RGB Input
Connect the output from a PC.
7
Connect to the
8Component Input
Connect a component video/audio device to these jacks.
9Antenna Input
Connect RF antenna to this jack.
10PCMCIA (Personal Computer Memory Card International Association) Card Slot
(This feature is not available in all countries.)
11Audio/Video Input
Connect audio/video output from an external device to these jacks.
Connect
12Headphone Socket
Connect the headphone plug to this socket.
13SERVICE ONLY PORT
LCD TV Models : 19/22LS4D*
1Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
2HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.
3RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4Antenna Input
Connect RF antenna to this jack.
5PCMCIA (Personal Computer Memory Card International Association) Card Slot
(This feature is not available in all countries.)
910
6Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
7
Connect to the
8Component Input
Connect a component video/audio device to these jacks.
9RGB Input
Connect the output from a PC.
10 SERVICE ONLY PORT
9
PREPARATION
PREPARATION
STAND INSTALLATION
(LCD TV Models: 26/32/37/42LG30**, 32/37/42LG50**)
A When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
Stand Body
Cover Base
(Only 19/22LG30**)
Stand Body
Cover Base
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2Assemble the parts of the STAND BODY with COVER BASE of the TV. Insert the STAND BODY into a COVER BASE until clicking sound.
3 Assemble the TV as shown.
10
(Only 42PG10**, 42PG20**, 42PG30**)
1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2Assemble the TV as shown.
3Fix the 4 bolts securely using the holes in the back of the TV.
PREPARATION
11
PREPARATION
PREPARATION
STAND INSTALLATION (Only 19/22LS4D*)
??? Image shown may differ from your TV.
damage.
Stand Body
Cover Base
Swivel Stand
(Except for 19/22LS4D*, 50PG10**)
After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.
12
DETACHING STAND (Only 19/22LS4D*)
??? Image shown may differ from your TV.
PREPARATION
3Hold the Cover Base and pull with shake it backward to separate from the Stand Body.
13
PREPARATION
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT
FALL OVER.
??? You should purchase necessary components to fix the TV to the wall on the market.
??? Position the TV close to the wall to avoid the possibility of it falling when pushed.
1Use the
* Insert the
2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
3
3Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV.
! NOTE
GWhen moving the TV undo the cords first.
GUse a platform or cabinet strong and large enough to support the size and weight of the TV.
GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
14
BACK COVER FOR WIRE ARRANGEMENT
PLASMA TV Models
1Connect the cables as necessary.
To connect additional equipment, see the External Equipment Setup section.
PREPARATION
2Install the CABLE MANAGEMENT CLIP as shown.
If your TV has the CABLE HOLDER, install it as shown and bundle the cables.
CABLE MANAGEMENT CLIP
CABLE MANAGEMENT CLIP
CABLE HOLDER
How to remove the cable management clip
Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
* For the 42PG10** model, press the center of the CABLE MANAGEMENT CLIP and then lift up it.
15
PREPARATION
PREPARATION
LCD TV Models: 26/32/37/42LG30** 32/37/42/47/52LG50**
1 Connect the cables as neces- sary.
To connect additional equip- ment, see the External Equipment Setup section of the manual.
2Open the CABLE MANAGEMENT CLIP as shown and manage the cables.
3Fit the CABLE MANAGEMENT CLIP as shown.
LCD TV Models : 19/22LS4D*
1Connect the cables as necessary.
To connect additional equipment, see the External Equipment Setup section.
2 Install the CABLE MANAGEMENT CLIP as shown.
How to remove the cable management clip (LCD TV Models : 19/22LS4D*)
First, press the cable management. Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
! NOTE
G Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
16
LCD TV Models : 19/22LG30**
1Connect the cables as necessary.
To connect additional equipment, see the External Equipment Setup section of the manual.
2 Install the CABLE MANAGEMENT CLIP as shown.
CABLE MANAGEMENT CLIP
PREPARATION
How to remove the cable management clip
G Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward.
! NOTE
G Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
17
PREPARATION
POSITIONING YOUR DISPLAY (Only 19/22LG30**, 19/22LS4D*)
???Image shown may differ from your TV.
???Adjust the position of the panel in various ways for maximum comfort.
PREPARATION
??? Tilt range
10~12
LOCATION (Only 19/22LG30**, 19/22LS4D*)
Position your TV so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the tv to any unnecessary vibration, moisture, dust or heat. Also ensure that the TV is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back of the TV.
When you install the TV to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
KENSINGTON SECURITY SYSTEM (Only 19/22LG30**, 19/22LS4D*)
The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.
For the detailed installation and use of the Kensington Security System, refer to the user???s guide provided with the Kensington Security System.
For further information, contact http://www.kensington.com, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a.If the TV feels cold to the touch, there may be a small ???flicker??? when when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the screen, appear- ing as tiny red, green, or blue spots. However, they
adverse effect on the monitor's performance. c. Avoid touching the LCD screen or holding your
against it for long periods of time.
Doing so may produce some temporary distortion the screen.
18
???The TV can be installed in various ways such as on a wall, or on a desktop etc.
???The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4??? (10cm) all around the TV.
4 inches
Power Supply
Circuit breaker
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4??? (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
Not using the
(Except for 19/22LS4D*)
??? Image shown may differ from your TV.
19
PREPARATION
??? To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
???For optimum picture quality, adjust antenna direction.
???An antenna cable and converter are not supplied.
PREPARATION
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
(Connect to wall jack for outdoor antenna)
UHF
VHF
???In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.
???If signal needs to be split for two TVs, use an antenna signal splitter for connection.
20
EXTERNAL EQUIPMENT SETUP
???To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
???This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 22LS4D* models.
HD RECEIVER SETUP
???This TV can receive Digital RF/Cable signals without an external digital
Connecting with a component cable
1Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the TV.
2Connect the audio output of the digital
3Turn on the digital
(Refer to the owner???s manual for the digital
4Select Component input source using the INPUT button on the remote control.
12
SETUP EQIPMENT EXTERNAL
Connecting a
Connect the HDMI output of the digital
1HDMI/DVI IN, HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3 jack on the TV.
2Turn on the digital
(Refer to the owner???s manual for the digital
3Select HDMI/DVI, HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.
HDMI/DVI IN
1
21
EXTERNAL EQUIPMENT SETUP
Connecting with a HDMI to DVI cable
1
2
AUDIO
DIGITAL AUDIO OUT SETUP
(Except for 19/22LS4D*)
-Sending the TV???s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
1Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
2Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
3Set the ??? TV Speaker option - Off ??? in the AUDIO menu. (G p.80) Refer to the external audio equipment instruction manual for operation.
RGB IN (PC)
(CONTROL & SERVICE)
2
AUDIO
CAUTION
GDo not look into the optical output port. Looking at the laser beam may damage your vision.
22
DVD SETUP
When connecting with a component cable
1Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV.
2Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV.
3 Turn on the DVD player, insert a DVD.
4Select Component input source using the INPUT button on the remote control.
5 Refer to the DVD player's manual for operating instructions.
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Connecting with a Euro Scart cable
1Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the TV.
2Turn on the DVD player, insert a DVD.
3Select AV1 input source using the INPUT button on the remote control.
If connected to AV2 Euro scart socket, select AV2 input source.
4Refer to the DVD player's manual for operating instructions.
!NOTE
G Any Euro scart cable used must be signal shielded.
1
23
EXTERNAL EQUIPMENT SETUP
Connecting with a
(Except for 19/22LS4D*, 42/50PG10**)
instructions.
SLOTCARD
PCMCIA
HDMI 3IN
AUDIO
L/MONO
VIDEO
AV IN 3
ANT OUT
12
Connecting the HDMI cable
1Connect the HDMI output of the DVD to the HDMI/DVI IN, HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3 jack on the TV.
2Select HDMI/DVI, HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.
3Refer to the DVD player's manual for operating instructions.
! NOTE
G The TV can receive video and audio signals simultaneously when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
24
HDMI/DVI IN
1
VCR SETUP
???To avoid picture noise (interference), allow adequate distance between the VCR and TV.
???If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.
When connecting with a RF Cable
EQIPMENT EXTERNAL
2
Wall Jack
Antenna
SETUP
1
2
Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.
Connect the antenna cable to the ANT IN socket of the VCR.
3Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.
25
EXTERNAL EQUIPMENT SETUP
Connecting with a Euro Scart cable
1Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the TV.
! NOTE
G Any Euro scart cable used must be signal shielded.
1
Connecting with a RCA cable
(Except for 19/22LS4D*, 42/50PG10**)
1Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner???s manual.)
3Select AV3 input source using the INPUT button on the remote control.
!NOTE
G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
26
SLOTCARD
PCMCIA
HDMI 3IN
AUDIO
L/MONO
VIDEO
AV IN 3
Connecting with a
(Except for 19/22LS4D*, 42/50PG10**)
1Connect the
2Connect the audio outputs of the VCR to the AUDIO input jacks on the TV.
3Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner???s manual.)
4Select AV3 input source using the INPUT button on the remote control.
!NOTE
GIf both
SLOTCARD
PCMCIA
HDMI 3IN
VIDEO L/MONO AUDIO
AV IN 3
12
SETUP EQIPMENT EXTERNAL
OTHER A/V SOURCE SETUP
(Except for 19/22LS4D*, 42/50PG10**)
1Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red)
2Select AV3 input source using the INPUT button on the remote control.
3Operate the corresponding external equipment. Refer to external equipment operating guide.
SLOTCARD
PCMCIA
HDMI 3IN
AUDIO
L/MONO
VIDEO
AV IN 3
Camcorder
Video Game Set
VIDEO L R
1
27
EXTERNAL EQUIPMENT SETUP
INSERTION OF CI MODULE
-To view the encrypted (pay) services in digital TV mode.
-This feature is not available in all countries.
Insert the CI Module to PCMCIA (Personal Computer
PCMCIA
CARD SLOT
1
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a
28
Connecting with a HDMI to DVI cable
1Connect the DVI output of the PC to the HDMI/DVI IN, HDMI/DVI IN 1(DVI) or HDMI/DVI IN 1 jack on the TV.
2Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
3Turn on the PC and the TV.
4Select HDMI/DVI or HDMI 1 input source using the INPUT button on the remote control.
1
2
AUDIO
SETUP EQIPMENT EXTERNAL
! NOTE
G To enjoy vivid picture and sound, connect a PC to the TV.
G Avoid keeping a fixed image on the TV???s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
G Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution.
G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
G The synchronization input waveform for Horizontal and Vertical frequencies are separate.
G Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.
G Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV).
G If using a sound card, adjust PC sound as required. G This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when
using this TV.
G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode.
G If required, adjust the settings for Plug and Play functionality.
G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV.
G If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.)
G DOS mode may not work depending on the video card if you use a HDMI to DVI cable.
G If you use too long an
29
EXTERNAL EQUIPMENT SETUP
SETUP EQIPMENT EXTERNAL
Supported Display Resolution (Only 19/22LS4D*)
30
Supported Display Resolution
(Only 19/22/26/32/37/42LG30**, 32/37/42/47/52LG50**)
SETUP EQIPMENT EXTERNAL
Supported Display Resolution (Only 42/50PG10**, 42/50PG20**, 42/50/60PG30**)
31
EXTERNAL EQUIPMENT SETUP
SETUP EQIPMENT EXTERNAL
32
Screen Setup for PC mode
Screen Reset
Returns to the default settings Position, Size and Phase at the factory.
This function works in the following mode : RGB[PC].
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.
This function works in the following mode : RGB[PC].
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
SETUP EQIPMENT EXTERNAL
33
EXTERNAL EQUIPMENT SETUP
SETUP EQIPMENT EXTERNAL
34
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] mode.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
SETUP EQIPMENT EXTERNAL
1MENU
Select PICTURE.
2
3
4
???If the position of the image is still not correct, try Auto adjustment again.
???If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Position, Size or Phase.
5
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
35
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS (Only 19/22LS4D*)
When using the remote control, aim it at the remote control sensor on the TV.
CONTROL PROGRAMME / TV WATCHING
36
OK
EXIT
RETURN
VOL * PR
FAV
RATIO SLEEP SUBTITLE UPDATE
INDEX TIME HOLD REVEAL
?
POWER Switches the TV on from standby or off to standby.
D/A INPUT Selects digital or analogue mode.
Switches the TV on from standby.
INPUT External input mode rotate in regular sequence. Switches the TV on from standby.
TV/RADIO Selects Radio or TV channel in digital mode.
I/II Selects the sound output.
MUTE Switches the sound on or off.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
MENU Selects a menu.
AV MODE It helps you select and set images and sounds when con- necting AV devices.
INFO i Shows the present screen information.
GUIDE Shows programme schedule.
THUMBSTICK Allows you to navigate the
OK Accepts your selection or displays the current mode.
VOLUME UP Adjusts the volume.
/DOWN
RETURN(EXIT) Allows the user to move back one step in an interactive application, EPG or other user interaction function.
* No function
FAV Displays the selected favourite programme.
Programme Selects a programme.
UP/DOWN
1
1
OK
EXIT
RETURN
VOL * PR
FAV
RATIO SLEEP SUBTITLE UPDATE
INDEX TIME HOLD REVEAL
?
Coloured These buttons are used for teletext (on TELETEXT buttons models only) or Programme edit.
RATIO Selects your desired picture format.
SLEEP Sets the sleep timer.
SUBTITLE Recalls your preferred subtitle in digital mode.
Installing Batteries
???Open the battery compartment cover on the back and install the batteries matching correct polarity (+with
???Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones.
???Close cover.
CONTROL PROGRAMME / TV WATCHING
37
WATCHING TV / PROGRAMME CONTROL
(Only 42/50PG10**)
* T.OPT SUBTITLE
1
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence. Switches the TV on from standby.
TV/RAD Selects Radio or TV channel in digital mode.
GUIDE Shows programme schedule.
INFO i Shows the present screen information.
1TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ???Teletext??? section.
AV MODE It helps you select and set images and sounds when connecting AV devices.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
MENU Selects a menu.
Clears all
Q.MENU Select the desired quick menu source.
THUMBSTICK Allows you to navigate the
Right)
OK Accepts your selection or displays the current mode.
RETURN(EXIT) Allows the user to move back one step in an interactive application, EPG or other user interaction function.
RATIO Selects your desired picture format.
38
* T.OPT SUBTITLE
Installing Batteries
???Open the battery compartment cover on the back and install the batteries matching correct polarity (+with
???Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones.
???Close cover.
39
WATCHING TV / PROGRAMME CONTROL
(Except for 19/22LS4D*, 42/50PG10**)
CONTROL PROGRAMME / TV WATCHING
RATIO
3
1
2
2
1 MODE Selects the remote operating modes.
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
Switches the TV on from standby.
TV/RAD Selects Radio, TV, DTV channel.
RATIO Selects your desired picture format.
Q. MENU Select the desired quick menu source.
MENU Selects a menu.
Clears all
GUIDE Shows programme schedule.
THUMBSTICK Allows you to navigate the
OK Accepts your selection or displays the current mode.
RETURN(EXIT) Allows the user to move back one step in an interactive application, EPG or other user interaction function.
INFO i Shows the present screen information.
AV MODE It helps you select and set images and sounds when connecting AV devices.
Coloured These buttons are used for teletext (on TELETEXT buttons models only) , Programme edit.
2TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ???Teletext??? section.
SUBTITLE Recalls your preferred subtitle in digital mode.
3 See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears at the screen.
40
RATIO
VOLUME UP Adjusts the volume.
/DOWN
FAV Displays the selected favourite programme.
MUTE Switches the sound on or off.
Programme Selects a programme.
UP/DOWN
PAGE Move from one full set of screen information to the next
UP/DOWN one.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
SIMPLINK Controls simplink. control buttons
Installing Batteries
??? Open the battery compartment cover on the back and install the batteries matching correct polarity (+with
??? Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones.
??? Close cover.
CONTROL PROGRAMME / TV WATCHING
WATCHING TV / PROGRAMME CONTROL
CONTROL PROGRAMME / TV WATCHING
TURNING ON THE TV
-When your TV is turned on, you will be able to use its features.
1 Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2In standby mode to turn TV on, press the r / I, INPUT or P 
(or PR D E) button on the TV or press the POWER, INPUT, D/A, P 
(or (PR + - or P +
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Select Mode, Country, Time Zone, Auto programme tuning.
Note:
a.It will automatically disappear after approx. 40 seconds unless a button is pressed.
b.Press the RETURN button to change the current OSD to the previous OSD.
c.For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment.
d."Home??? mode is the optimal setting for home environments, and is the TV's default mode.
e."In Store" mode is the optimal setting for store environments.??? If a user modifies image quality data, ???In Store??? mode initializes the product to the image quality set by us after a certain period of time.
f.The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
PROGRAMME SELECTION
1Press the P 
(or (PR + - or P +
VOLUME ADJUSTMENT
1Press the VOL + - (or 
+
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE, VOL + - (or 
+
42
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
CONTROL PROGRAMME / TV WATCHING
43
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming in digital mode, all previously stored service information will be deleted.
PROGRAMME / TV WATCHING
CONTROL
1MENU
Select SETUP.
2
3
4
???Use NUMBER buttons to input a
???If you wish to keep on auto tuning select YES using the 
button. Then, press the OK button. Otherwise select NO.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
44
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
4
Select the desired channel number.
CONTROL PROGRAMME / TV WATCHING
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
45
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
CONTROL PROGRAMME / TV WATCHING
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
???Use NUMBER buttons to input a
???L : SECAM L/L??? (France)
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
???To store another channel, repeat steps 4 to 9.
46
A Assigning a station name
You can assign a station name with five characters to each programme number.
Select the position and make your choice of the second char- acter, and so on.
You can use an the alphabet A to Z, the number 0 to 9, +/
Select Close.
Select Store.
CONTROL PROGRAMME / TV WATCHING
A Fine Tuning
Normally fine tuning is only necessary if reception is poor.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
47
WATCHING TV / PROGRAMME CONTROL
CONTROL PROGRAMME / TV WATCHING
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P 
(or PR + /
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu
This function enables you to skip the stored programmes.
In some countries it is possible to move a programme number by using the YELLOW button only.
Auto tuning
Manual tuning
Programme Edit
Booster : On
Software Update : Off
Diagnostics
CI Information
OK
4
Select a programme to be stored or skipped.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
48
(IN DTV/RADIO MODE)
A Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the skipped programme number to blue.
3
BLUE Release the skipped programme.
???When a programme number is skipped it means that you will be unable to select it using the P 
(or PR + /
???If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
PROGRAMME / TV WATCHING
A Selecting favourite programme
CONTROL
49
CONTROL PROGRAMME / TV WATCHING
WATCHING TV / PROGRAMME CONTROL
IN TV MODE
This function enables you to delete or skip the stored programmes.
You can also move some channels to other programme numbers.
A Auto Sort
2
RED Turn the deleted programme number to red.
3
RED Release the deleted programme.
A Moving a programme
1
Select a programme number to be moved.
2
3
YELLOW Release the moved programme.
A Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the skipped programme number to blue.
3
BLUE Release the skipped programme.
???When a programme number is skipped it means that you will be unable to select it using the P 
(or PR + /
???If you wish to select a skipped programme, directly enter the programme number with the NUMBER but- tons or select it in the programme edit or EPG.
50
A Selecting a Favourite Programme
BOOSTER (IN DIGITAL MODE ONLY)
If reception is poor, selectBooster to On.
When the signal is strong, select ???Off???.
Auto tuning
Manual tuning
Programme Edit
Booster : On
Software Update : Off
Diagnostics
CI Information
PROGRAMME / TV WATCHING
CONTROL
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
51
WATCHING TV / PROGRAMME CONTROL
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
/ TV WATCHING
Auto tuning
Manual tuning
Programme Edit
Booster : On
Software Update : Off
Diagnostics
CI Information
CONTROL PROGRAMME
* When setting ???Software Update???
- During Progress of a Software Update, please note the following:
???Power to the TV must not be interrupted.
???The TV must not be switched off.
???The antenna must not be disconnected.
???After Software Update, you can confirm the updated software version in Diagnostics menu.
52
DIAGNOSTICS (IN DIGITAL MODE ONLY)
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version.
This displays the information and signal strength of the tuned MUX.
This displays the signal information and service name of the selected MUX.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
CONTROL PROGRAMME / TV WATCHING
53
WATCHING TV / PROGRAMME CONTROL
CI [COMMON INTERFACE] INFORMATION
This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services.
When the module is inserted into the CI slot, you can access the module menu.
To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output.
This may be incompatible with the CI module and smart card.
CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances.
CONTROL PROGRAMME / TV WATCHING
Auto tuning
Manual tuning
Programme Edit
Booster : On
Software Update : Off
Diagnostics
CI Information
Viaccess Module
Consultations
Authorizations
Module information
Select the item
???This OSD is only for illustration and the menu options and screen format will vary according to the Digital pay services provider.
???It is possible for you to change CI (Common Interface) menu screen and service by consulting your dealer.
1MENU
Select SETUP.
2
OK
3
OK
4
OK
54
Select CI Information.
Select the desired item: Module information, smart card information, language, or software download etc.
Save.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by displaying the programme table.
Displayed when the
Locked Programme.
A Displaying programme LIST
1
LIST display the PROGRAMME LIST.
???You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode.
???Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned.
CONTROL PROGRAMME / TV WATCHING
A Selecting a programme in the programme list
OK Switch to the chosen programme number.
A Paging through a programme list
A Displaying the favourite programme table
1
55
WATCHING TV / PROGRAMME CONTROL
(Except for 19/22LS4D*, 42/50PG10**)
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
If you do not want SIMPLINK menu, select ???Off???.
SIMPLINK function is not supported by HDMI IN 3 input.
PROGRAMME / TV WATCHING
E
CONTROL
1MENU
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
! NOTE
G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable.
G After connecting the HDMI terminal for the home theatre with the SIMPLINK function using the above method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN ter- minal on the back of the SIMPLINK device with the OPTICAL cable.
G When operating an external device with SIMPLINK, press the TV button from the MODE buttons on the remote control.
G When you switch the Input source using the INPUT button on the remote control, you can stop the opera- tion of a device controlled by SIMPLINK
G When you select or operate a media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker).
56
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the 
, OK, G, A, l l, FF and GG buttons.(The ?? button does not provide such functions.)
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch
Offers an easy way to switch
Sync Power on
When you play the connected AV device, TV will automatically turn on.
*A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.
SIMPLINK Menu
Press the 
button and then OK button to select the desired SIMPLINK source.
PROGRAMME / TV WATCHING
1TV viewing : Switch to the previous TV programme regardless of the current mode.
4HDD Recordings playback : Play and control 5 recordings stored in HDD.
5Audio Out to Home theater/Audio Out to TV: Select Home theater or TV speaker for Audio Out.
???Home theater: Only one supported at once
???DVD, Recorder: Up to three supported at once
???VCR: Only one supported at once
Selected Device
When no device is connect- ed (displayed in gray)
When a device is connected (displayed in bright colour)
CONTROL
57
WATCHING TV / PROGRAMME CONTROL
CONTROL PROGRAMME / TV WATCHING
58
INPUT LABEL
Selects a label for each input source.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
PROGRAMME / TV WATCHING
2
OK
???If you select Cinema Mode in AV mode, Cinema mode will be selected both for Picture Mode and Sound Mode in PICTURE menu and AUDIO menu respectively.
???If you select ???Off??? in AV mode, the picture and image which you initially set will be selected.
CONTROL
59
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcasted by broadcasting companies.
The EPG displays the programme description for next 8 days.
(ELECTRONIC EPG
Switch on/off EPG
Programme Guide
GUIDE) PROGRAMME
1GUIDE
Switch on or off EPG.
1 YLE TV1
TV/RAD Radio
Mode
D06 Mar. 2006 15:09
06 Mar.
60
Select a programme
1
2
Button Function in NOW/NEXT Guide Mode
INFO i
The detail information on or off.
(ELECTRONIC EPG
Button Function in 8 Day Guide Mode
The detail information on or off.
GUIDE) PROGRAMME
Select NOW or NEXT Programme.
Button Function in Date Change Mode
GREEN Switch off Date setting mode.
Switch off Date setting mode.
Select a date.
61
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
Button Function in Extended Description Box
GUIDE) PROGRAMME (ELECTRONIC EPG
62
Button Function in Record/Remind Setting Mode
- This function is available only when recording equipment that use pin8 recording signalling has been connect- ed to the
-Two hours after the TV is switched on by the Remind function it will automatically switch back to standby mode unless a button has been pressed.
Button Function in Schedule List Mode
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9 and Zoom1/2.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using 
button.
This function works in the following signal.
CONTROL PICTURE
63
PICTURE CONTROL
CONTROL PICTURE
???Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
Original
???14:9
You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right.
??? Zoom1
The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
???Zoom2
Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped. The picture adopting a compromise between alteration and screen coverage.
???Just Scan
Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image.
Note: If there are interference in original pic- ture, you can view interference at the edge.
Just Scan
64
! NOTE
GYou can only select 16:9 (Wide), 4:3, 14:9, Zoom 1/2 in Component (under 720p) mode.
GYou can only select 4:3, 16:9 (Wide) in RGB/HDMI[PC] mode only.
GIn HDMI/Component (over 720p) mode, Just Scan is available.
GYou can only select Original in UK digital teletext
PRESET PICTURE SETTINGS
Picture
G It is possible to use Intelligent Sensor in 32/37/42/47/52LG50** models only. G In PLASMA TV models, Backlight will not be displayed.
CONTROL PICTURE
???Picture Mode adjusts the TV for the best pic- ture appearance. Select the preset value in the Picture Mode menu based on the programme category.
???When the Intelligent sensor function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
(32/37/42/47/52LG50** only)
???You can also adjust Picture Mode in the Q . Menu.
???Intelligent Sensor : Adjusts picture accord- ing to the surrounding conditions. (32/37/42/47/52LG50** only)
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
65
PICTURE CONTROL
Auto Colour Tone Control (Warm/Medium/Cool)
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue.
CONTROL PICTURE
66
4
Select either Cool, Medium or Warm.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
MANUAL PICTURE ADJUSTMENT
Picture
G It is possible to use Intelligent Sensor in 32/37/42/47/52LG50** models only. G In PLASMA TV models, Backlight will not be displayed.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
! NOTE
G You can not adjust colour, sharpness and tint in the
CONTROL PICTURE
67
PICTURE CONTROL
Picture
By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.
CONTROL PICTURE
68
1MENU
Select PICTURE.
2
3
4
4
5
Make appropriate adjustments.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
PICTURE IMPROVEMENT TECHNOLOGY
Fresh Contrast
Optimizes the contrast automatically according to the brightness of the reflection.
Fresh Colour
Adjusts the colour of the reflection automatically to reproduce as close as possible natural colours.
Noise Reduction
Removes interference up to the point where it does not damage the original picture.
Gamma
High gamma values display whitish images and low gamma values display high contrast images.
4
Select your desired Source.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
CONTROL PICTURE
69
PICTURE CONTROL
ADVANCED - FILM MODE
To set the TV up for the best picture quality for viewing films.
This feature operates only in TV, AV and Component 480i/576i/1080i mode.
CONTROL PICTURE
70
4
Select On or Off.
???Press the MENU button to return to normal TV viewing.
???Press the RETURN button to move to the previous menu screen.
and 
are a trademark of SRS Labs, Inc.
button to select a subtitle language.
(or PR 
(or (PR + - or P + 
(or PR +) button can be used.
(or PR 
(or (PR + - or P + 
?
or NUMBER buttons.
(or (PR + - or P + 
, RED,
(or (PR + - or P + 
(or (PR + - or P + 
, RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on.
CAUTION
buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device.