ENGLISH

2 TABLE OF CONTENTS

CONTENTS

11 CUSTOMIZING SETTINGS

12Customizing Settings

12- Menu Settings

13-PICTURE

14-COLOR

15-DISPLAY

16-OTHERS

17SUPER ENERGY SAVING Setting

18PICTURE MODE Setting

19TROUBLESHOOTING

ASSEMBLING AND PREPARING 3

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

ENGLISH

( Depending on the country )

DVI-D Cable

(E2042T/E2242T/E2342T/

E2442T)

(This cable is not included in all countries.)

or

AC-DC Adapter

( Depending on the country )

Setting up the Monitor set

Attaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

21 Attach the Stand Body to the monitor set.

2 Attach the Stand Base.

3 Tighten the screw to the right with a coin.

Detaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

21 Pull out the Stand Body and Stand Base from the monitor set.

2Turn the screw to the left with a coin.

3Pull out the Stand Base.

Stand Body

ENGLISH

ENGLISH

Mounting on a table

1Lift and tilt the Monitor set into its upright position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

3Press (Power) button on the bottom switch panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

Using the cable holder

When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

Do not touch or press the screen when adjusting the angle of the monitor.

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the Monitor set and a table.

NOTE

The Kensington security system is optional. You can obtain it from most electronics stores.

ENGLISH

ENGLISH

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In

this case, LG Electronics is not responsible for it.

4VESA compatible.

5Please use VESA standard as below.

yy784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm

* Screw : ?? 4.0 mm x Pitch 0.7 mm x

Length 10 mm

yy787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.

CAUTION

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit will include an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

Connecting to a PC

yyYour Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

NOTE

yyWhen using a D-Sub signal input cable connector for Macintosh

yyMac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

ENGLISH

ENGLISH

CAUTION

yyConnect the signal input cable and tighten

it by turning the screws clockwise.

yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

NOTE

yyWhen you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ DVI-D) respectively in Monitor set.

yyIf you turn the Monitor set on while it is cold, the screen may flicker. This is normal.

yySome red, green, or blue spots may appear on the screen. This is normal.

Self Image Setting Function

Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode)

NOTE

yy"Self Image Setting" Function.

This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode)

yy???AUTO??? Function.

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)

ENGLISH

?????? ORIGINAL

PICTURE

1Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2Select the "NEXT MENU" button to enter the more option settings.

3Enter to PICTURE by pressing the ??? button.

4Set the options by pressing the ??? or ??? or ??? buttons.

5Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow () button.

ENGLISH

14 CUSTOMIZING SETTINGS

COLOR

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2 Select the "NEXT MENU" button to enter the more option settings.

3 Select COLOR by pressing the ??? button.

4 Enter to COLOR by pressing the ??? button.

5 Set the options by pressing the ??? or ??? or ??? buttons.

6Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow () button.

Each option is explained below.

DISPLAY

1Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2Select the "NEXT MENU" button to enter the more option settings.

3Select DISPLAY by pressing the ??? button.

4Enter to DISPLAY by pressing the ??? button.

5Set the options by pressing the ??? or ??? or ??? buttons.

6Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow () button.

ENGLISH

16 CUSTOMIZING SETTINGS

OTHERS

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2 Select the "NEXT MENU" button to enter the more option settings.

3 Select OTHERS by pressing the ??? button.

4Enter to OTHERS by pressing the ??? button.

5Set the options by pressing the ??? or ??? or ???

buttons.

6Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow () button.

Each option is explained below.

CUSTOMIZING SETTINGS 17

SUPER ENERGY SAVING Setting

1 Press ( SUPER ENERGY SAVING ) button on the bottom of the Monitor set to display the SUPER

ENERGY SAVING OSD.

2 Set the options by pressing the ??? or ??? or ??? buttons.

3 Select EXIT to leave the OSD menu.

Each option is explained below.

NOTE

yyTOTAL POWER REDUCTION: How much power is saved while using the monitor.

yyTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. yySAVING DATA(W/h)

yySaving Data depends on the Panel. So,those values should be different from each panel and panel vendor.

yyLG calculated these values by using ???broadcast video signal??? (including broadcast video: IEC 62087)

yySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.

ENGLISH

TROUBLESHOOTING 19

TROUBLESHOOTING

Check the following before calling for service.

No image appears

Do you see a "OSD LOCKED" message on the screen?

Do you see ???OSD LOCKED??? when yy You can secure the current control settings, so that they cannot be you push MENU button?inadvertently changed. You can unlock the OSD controls at any time

by pushing the MENU button for several seconds: the message ???OSD UNLOCKED??? will appear.

Display image is incorrect

ENGLISH

ENGLISH

20 TROUBLESHOOTING

CAUTION

yyCheck Control Panel ??? Display ??? Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.

yyIf the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.

yyThe setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.

Display image is incorrect

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

ENGLISH

ENGLISH

22 SPECIFICATIONS

???SPECIFICATIONS

E2042S

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

ENGLISH

ENGLISH

24 SPECIFICATIONS

???SPECIFICATIONS

E2242S

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

ENGLISH

ENGLISH

26 SPECIFICATIONS

SPECIFICATIONS???

E2342T

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC

or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

ENGLISH

ENGLISH

28 SPECIFICATIONS

Preset Modes (Resolution)

E1942S

SPECIFICATIONS 29

Preset Modes (Resolution)

E2242S/E2242T/E2342T/E2442T

ENGLISH

ENGLISH

30 PROPER POSTURE

PROPER POSTURE

Proper posture for using the Monitor set.

Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle.

Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.

Adjust the location of the Monitor set to avoid it reflecting light.

Make sure to read the Safety Precautions before using the product.

Keep the Owner???s Manual (CD) in an accessible place for future reference.

The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.

MODEL

SERIAL

ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA).

As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.