Kodak EasyShare

G610 printer dock

User???s guide

www.kodak.com

For interactive tutorials, www.kodak.com/go/howto

Eastman Kodak Company

Rochester, New York 14650

?? Eastman Kodak Company, 2006

All screen images are simulated.

Kodak, EasyShare, ImageLink, and XtraLife are trademarks of Eastman Kodak Company.

P/N 4J6122_en

1 Getting started

Finding a location for your printer dock

???Place the printer dock on a flat, clean, dust-free surface, in a dry location, and out of direct sunlight.

???Avoid areas where ventilation ducts, open doors, or frequent passersby might expose the printer dock and paper to high levels of dust and debris. Airborne dirt particles can affect picture quality.

???Allow enough space on all sides of the printer dock to let you connect and disconnect cables, change the cartridge, and add paper.

Handling and storing the cartridge and paper

Cartridge

???Keep cartridges out of the reach of children.

???For best quality prints, store the cartridge in a location where the temperature does not exceed 85??F (30??C).

???To avoid getting fingerprints on the ribbon, handle the cartridge by the spool ends.

???Keep the cartridge away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun).

Getting started

Paper

???To avoid fingerprints on the paper, handle it by the edges. Do not touch the glossy side of the paper.

??? To store paper, remove the tray and close the cover and door to keep out dust and debris. Store paper flat.

???Keep the paper away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun).

Attaching the custom camera insert

IMPORTANT: Use the custom insert that came with your digital camera to dock the camera. Depending on your camera connector, you may need the Kodak dock adapter kit D-26. See the instructions included with the dock adapter.

??? Place the insert tabs into the back slots of the dock.

??? Then press the front tabs down and snap into place.

Purchase a custom camera insert for your Kodak

EasyShare digital camera and other accessories at

www.kodak.com/go/accessories.

Getting started

Connecting the power

RISK OF ELECTRIC SHOCK:

Use only the AC power adapter included with your printer dock. Other adapters or cords can damage your camera, printer dock, or computer.

1 Make sure your camera is not docked on the printer dock.

2 Connect the AC power cord to the AC power adapter, then to the back of the printer dock.

NOTE: The AC power adapter included with your printer dock may not require assembly and may be different from the one shown.

3 Connect the AC power adapter into a power outlet.

The printer dock turns on.

IMPORTANT: Keep the cables clear of the paper path to the front and rear of the printer dock.

Purchase an AC power adapter and other accessories at

www.kodak.com/go/accessories.

IMPORTANT: When traveling, verify that your AC power adapter is compatible in the region to which you are traveling.

2 Setting up your digital camera

Docking and charging the camera

Docking your digital camera lets you make prints directly from the camera, transfer pictures from the camera to the computer, and charge the camera battery.

This printer dock is ImageLink print-system compatible. You can dock not only Kodak EasyShare digital cameras, but other brands of ImageLink system-compatible digital devices.

NOTE: Not all cameras are compatible for charging on the G610 printer dock. See your camera user???s guide for dock compatibility.

Docking the camera

1 Connect your printer dock power (see page 3) and attach a custom camera insert (see page 2).

2 Load a Kodak Ni-MH rechargeable digital camera battery KAA2HR, or a Kodak Li-Ion rechargeable digital camera battery into the camera for charging. See your camera user???s guide.

NOTE: Your printer dock charges only Kodak Ni-MH KAA2HR and Li-Ion rechargeable batteries.

3 Place the camera on the printer dock. Push camera down to seat the connector.

The battery status light on the printer dock lights up if a rechargeable battery is in the camera, and an initializing message appears on the camera screen.

4Keep the camera strap clear of the paper path to the front and rear of the printer dock.

The camera is now powered by the printer dock instead of the camera battery.

Setting up your digital camera

Charging the camera

???Make sure your printer dock power is connected (see page 3), and your camera is docked (see page 7).

???The Kodak Ni-MH rechargeable digital camera battery or Kodak Li-Ion rechargeable digital camera battery in your camera charges up to 3 hours.

Camera battery status light on printer dock:

Amber = Battery is charging

Steady green = Battery charging is complete

??? You may leave the camera on the printer dock to maintain the charge.

NOTE: Charging does not begin immediately after the camera is docked. It may take several minutes before the battery light indicates the charge status.

For Kodak EasyShare camera and dock compatibility, visit

www.kodak.com/go/adapterkitchart.

Setting up your digital camera

Refreshing the Kodak Ni-MH rechargeable camera battery

IMPORTANT: The battery refresh feature is intended for use with the Kodak Ni-MH rechargeable digital camera battery KAA2HR only. Li-Ion batteries do not require refreshing.

Battery status light - green, when

charging is complete.

8 hours for full refresh

NOTE: If you are getting fewer than 20 pictures per charge, you may need to refresh the battery. The refresh cycle completely discharges the battery, then fully charges it. See Extending battery life, page 44.

1 Make sure the Ni-MH rechargeable battery is in the camera.

2 Place your EasyShare camera on the printer dock (see page 7).

3 Press and hold the and Cancel buttons on the printer dock at the same time for 5 seconds, then release the buttons.

To purchase a Kodak Ni-MH rechargeable digital camera battery for your digital camera, visit www.kodak.com/go/accessories. See your camera user???s guide for battery compatibility.

Setting up your digital camera

Best camera setting for 4 x 6 inch (10 x 15 cm) prints

Before taking pictures, change the Picture-size setting or resolution on your digital camera to (3:2). This ensures that the pictures you take are proportional to the printer-dock paper, preventing unwanted cropping of your pictures.

See your Kodak EasyShare digital camera user???s guide for more information.

3 Printing without a computer

IMPORTANT: Wait until printing is complete before you remove the paper, paper tray, or the camera. Failure to do so can cause paper misfeeds or jams.

Printing from your digital camera

1 Take a picture with your camera (see your camera user???s guide).

2Place the camera on the printer dock (see page 7).

The current or most recent picture appears on the camera screen.

To print the current picture, press (OK/Print button). To print additional pictures on your camera:

???Press on the printer dock to locate a picture. To fast scroll, press and hold

.

???Press to select the print quantity.

???Repeat for each picture you want to print.

???Press .

The print screen appears.

To print all the pictures on your camera, select Print All, then press (OK/Print button).

NOTE: If you don???t press any buttons after 10 seconds, printing starts automatically.

Printing without a computer

The paper cycles four times during the printing process. The first three passes apply layers of yellow, magenta, and cyan colors to the print, and the fourth pass applies the Kodak XtraLifeTM coating that protects and preserves the image.

IMPORTANT: Do not pull out the print. The printer dock automatically ejects the finished print after the fourth pass.

Selecting pictures on your camera for printing

NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging pictures on other brands of ImageLink system-compatible cameras, see the camera user???s guide.

1 Press the Share button on your camera.

2 Press to locate a picture.

3Make sure Print is highlighted. (To tag all pictures in the current image storage location for printing, press to highlight Print All.) Press the OK button.

4Press to select the number of copies (0???99). The default is one. Zero removes the tag for a selected picture.

???To apply a print quantity to other pictures, press to locate them. Keep the print quantity as is, or press to change it.

5 Press the OK button.

6 Press the Share button to exit.

Printing without a computer

Printing tagged pictures

If your camera or memory card contains pictures tagged for printing (see page 12 for your camera user???s guide), the printer dock gives you the option to print tagged pictures first. A message appears on your docked camera screen indicating that tagged pictures have been found:

???To print tagged pictures???press (OK/Print button).

The Tagged Print screen appears.

Press on your printer dock to make your selection, then press (OK/Print button).

Printing starts, and tagged pictures are printed. Print tags are removed from tagged pictures on your camera or card as they are printed.

???To bypass printing of tagged pictures???press on your camera and select Review All Pictures, then press (OK/Print button).

NOTE: If you tagged pictures for printing using your digital camera, instead of printing the current picture, all tagged pictures are printed.

NOTE: When printing tagged pictures, the number of copies that are printed is determined by the setting on your camera.

Printing without a computer

Changing the printed picture layout

1 Follow the steps to print from your digital camera (see page 11). NOTE: You can only change the picture layout if your camera is docked (see page 7).

2 Press on your printer dock to highlight Layout.

3 Press to change the picture layout.

NOTE: A panoramic picture prints on multiple sheets if you select the 1-up picture layout setting.

4Press (OK/Print button) to begin printing, or press Cancel to return to the main review screen.

NOTE: If you don???t press any buttons after 10 seconds, printing starts automatically.

Printing without a computer

To change the default picture layout:

???Select another picture layout, then press and hold (OK/Print button) for 5 seconds.

The selected picture layout appears on the docked camera screen and becomes the default layout.

To print different pictures on the same sheet:

???Select one copy of each picture on your docked camera (see page 11) or on your camera prior to docking (see page 12).

To print duplicate copies on the same sheet:

???Make sure the print quantity you choose for the tagged pictures on your camera (see page 12) matches the number of prints in the picture layout you choose.

Effect of picture layout on number of copies

When printing tagged pictures (see page 13), the number of copies that are printed is determined by the setting on your camera or device. For example, if three pictures on your camera are each tagged for printing one copy, and the 4-up option on the printer dock is selected, three 2 x 3 in. (51 x 76 mm) pictures are printed on one sheet of paper.

For best results, use your camera???s 3:2 picture size setting to avoid cropping (see your camera user???s guide).

NOTE: If the picture layout selected on your device does not match any of the sizes on the printer dock, then the closest picture layout on the printer dock is automatically selected.

Printing without a computer

Reducing red eye in your prints

Your printer dock automatically detects and corrects red eye in your subjects before you print your pictures.

???Red-eye reduction is applied to images that were captured using the flash on your digital camera.

???You can set red-eye reduction default to always being on or off.

???Printing time may slightly increase when using red-eye reduction.

???Your printer dock may apply red-eye reduction to an area such as red-painted fingernails, which darkens the area in your print. In this case, turn off red-eye reduction.

To set/change the red-eye reduction default:

1 Connect the printer dock power (see page 3), then dock your camera (see page 7).

2On the printer dock, press and hold (Down button) and (Transfer button) at the same time for 5 seconds. (The Red Eye screen appears.)

3 Follow instructions on the camera or computer screen.

4 Press (OK/Print button) to accept the red-eye default setting.

Canceling printing

To cancel printing, do one of the following:

???Press Cancel.

A confirmation screen appears. Printing is cancelled when you select that you are sure you want to cancel printing.

???Press and hold Cancel for 2 seconds.

Printing is cancelled automatically.

NOTE: When printing is cancelled, the paper is ejected from the printer dock. If you cancel a print during the fourth pass (clear coat), the print is ejected upon completion.

4 Installing software

Installing the software

1Close all open software applications before starting the installation.

If prompted, select Allow Kodak EasyShare software access to the Internet.

When installing from the Kodak Web site, do not close the program called WinZip.

2 Place the Kodak EasyShare software CD into the CD-ROM drive.

3 Load the software:

Windows OS???if the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD.

Mac OS X???double-click the CD icon on the desktop, then click the Install icon.

4 Follow the on-screen instructions to install the software.

???Select Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install.

IMPORTANT: To use the printer dock with a computer, you must install the printer driver. If you choose Custom, make sure the printer dock is selected. The printer driver is automatically installed if you choose Complete.

Add the printer for Mac OS X:

aOpen the finder window and click the Applications button. If you don???t see the Applications button, open the Applications folder on your operating drive.

b Open the Utilities folder, then double-click Print Center. c In the Printer List window, click the Add Printer button. d Select the printer dock, then click Add.

The printer dock is added to your computer.

Installing software

IMPORTANT: When prompted, take a few minutes to electronically register your printer dock and software. This lets you receive information regarding software updates and registers some of the products included with the printer dock. You must be connected to your Internet service provider to register electronically. To register later, visit www.kodak.com/go/register.

5 If prompted, restart the computer.

For more information on installing the software, see the ReadMe file on the Kodak EasyShare software CD. For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the EasyShare software.

5Using the printer dock with a computer

Connecting to a computer

IMPORTANT: Make sure your camera is NOT docked when you connect the printer dock to the computer.

1 Make sure Kodak EasyShare software is installed on the computer (see page 17).

2Plug the labeled end of the USB cable (included) into the labeled USB port on your computer. See your computer documentation for details.

3 Plug the other end of the USB cable into the square USB connector.

Using the printer dock with a computer

Transferring pictures from your digital camera

1Make sure Kodak EasyShare software is installed (see page 17), and the printer dock is connected to your computer (see page 19).

2 Place the camera on the printer dock (see page 7).

3Press the Transfer button, , on the printer dock.

Kodak EasyShare software opens on your computer and the printer dock Transfer light blinks green.

4Use Kodak EasyShare software to transfer pictures from the camera to your computer. See the Kodak EasyShare software Help for details.

NOTE: The Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink until the connection is no longer available or is ended from the computer.

NOTE: With the software installed, pressing the Transfer button establishes drive connections for the docked camera. You can view, copy, delete, and manage files on the new drives on the computer. See your computer documentation for details.

Canceling transferring

To cancel transferring, do one of the following:

???Press and hold the Cancel button for 2 seconds.

???Remove the docked camera.

Using the printer dock with a computer

Printing from a computer

We recommend using Kodak EasyShare software (included) for printing. This software lets you take advantage of a wide range of features, including full-color enhancement, red-eye reduction, picture organization, and much more. To install your Kodak EasyShare software, see page 17.

If there are no pictures on your computer, use the printer dock to transfer pictures from your camera or memory card before printing (see page 20).

Printing with Kodak EasyShare software

1Make sure Kodak EasyShare software is installed (see page 17), and the printer dock is connected to your computer (see page 19).

2 Click the My Collection tab.

3 Select the pictures you wish to print.

4 Click the Print at Home tab.

5 Make sure the printer dock is selected as the current printer.

6 Change any other settings, such as picture layout, then click Print. NOTE: Set printing options using EasyShare software.

See the EasyShare software Help for details.

Printing tagged pictures from your computer

1Make sure Kodak EasyShare software is installed (see page 17), and the printer dock is connected to your computer (see page 19).

2 Transfer the tagged pictures to your computer (see page 20).

3 Follow steps 4 through 6 (see page 21).

Using the printer dock with a computer

Printing with other applications

1Make sure the printer driver is installed (see page 17), and the printer dock is connected to your computer (see page 19).

2 Open the pictures in the application from which you want to print.

3Access the printer settings by selecting Print or Page Setup from the File menu (depending on your application and operating system).

4 Make sure the printer dock is selected as the current printer.

5Change any other settings as needed, then click OK or Print. (Depending on your application and operating system, you may first need to return to the main menu and select Print from the File menu.)

NOTE: Set printing options in the application from which you are printing.

Using the printer dock with a computer

Choosing a color mode

You have two color-correction options to help you make great-looking prints:

Natural???to get great, natural color for everyday picture-making.

None???to disable automatic color correction.

To change the color mode:

Windows 2000/XP OS:

1From the Start menu, select Settings, then select Printers.

NOTE: Depending on your Start menu configuration, you may need to select Printers and Faxes from the Control Panel.

2Right-click the Kodak EasyShare G610 printer dock icon, then select Printing Preferences.

3 Click the Color-Correction tab.

4 Select a color-correction option, then click OK.

Mac OS X 10.3 or higher:

1 Make sure the printer dock is selected as the current printer.

2 From an application File menu, select Print.

3 Select Color Control from the Copies & Pages pop-up menu.

4 Select Kodak color.

5 Select a color mode option.

Using the printer dock with a computer

Canceling printing

Windows 2000/XP OS:

1 Double-click the printer icon in the system tray.

2 Click the print job you want to cancel.

3 Select Document, then select Cancel.

Mac OS X 10.3 or higher:

1 In Print Center, double-click the printer icon.

2 Click the print job you want to cancel, then select Delete.

6Maintenance and firmware upgrade

Maintaining your printer dock

IMPORTANT: Always disconnect the power before cleaning. Do not use harsh or abrasive cleaners or organic solvents on the printer dock or any of its parts.

???To clean, wipe the outside of the printer dock with a clean, dry cloth.

For fingerprints, dampen a clean, soft cloth with a mild cleaning solution, then gently wipe the printer dock surface.

??? Support the printer dock and tray by placing it on a flat, level surface. Do not block the cooling vents.

??? Avoid blocking the back of the printer dock and paper-tray exit.

??? Keep power and USB cables away from the paper path.

??? Keep the surrounding area vacuumed and litter-free.

???Protect the printer dock from tobacco smoke, dust, sand, and liquid spills.

???Avoid placing objects on the printer dock.

???Keep the printer dock, accessories, and supplies away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun).

???When storing, remove the paper tray, then close the paper-tray cover (see page 6) and paper-tray door to keep out dust and debris. Store paper flat.

Maintenance and firmware upgrade

Cleaning the paper-feed rollers

To prevent misfeeds and to make sure your prints look their best, inspect the paper-feed rollers weekly for debris particles, and clean, if necessary.

IMPORTANT: Unplug the power before cleaning the paper-feed rollers.

1 Remove the paper tray from the printer dock, and leave the paper tray door open.

2Lightly moisten a lint-free cloth with water. (Do not use cotton swabs, harsh or abrasive cleaners, or organic solvents.)

3 Gently wipe clean the surface of the paper-feed rollers.

4 Advance the paper-feed rollers using the moistened lint-free cloth, as necessary, and continue cleaning.

5 Allow the paper-feed rollers to fully dry before reconnecting the power and inserting the paper tray.

Paper-feed rollers

Maintenance and firmware upgrade

Transporting your printer dock

IMPORTANT: Keep the printer dock, accessories, and supplies away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun).

Before you pack your printer dock:

???Remove the camera, paper tray, and cables

???Close the paper-tray door on the printer dock and the paper-tray cover, then slide the cover forward to keep out dust and debris. (See page 5.)

IMPORTANT: When traveling, verify that your AC power adapter is compatible in the region to which you are traveling.

Repack your printer dock and accessories in the original packing box, or consider purchasing a printer dock travel bag and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.

Upgrading your printer dock firmware

Connect your printer dock to your computer (see page 19). Download the latest version of the printer dock firmware (the software that runs on the printer dock) to your computer. Visit www.kodak.com/go/printerdockdownloads.

7 Troubleshooting

For step-by-step product support, visit www.kodak.com/go/g610support and select Interactive Troubleshooting and Repairs. Select FAQs to learn how to perform a Diagnostic test (identifies common problems).

Printing problems

Paper-feed rollers

4Advance the paper-feed rollers using the moistened lint-free cloth, as necessary, and continue cleaning.

5Allow the paper-feed rollers to fully dry before reconnecting the power and inserting the paper-tray.

3 Reload the paper tray (page 5).

4 Re-install the paper tray, then press to resume printing.

Troubleshooting

??? Reinsert the cartridge, then press Print.

The cartridge may lock in place if there is a paper jam. Do not attempt to remove the cartridge without first clearing the paper jam. Make sure there are no paper jam messages on your camera or computer screen before attempting to remove the cartridge.

If there is a cartridge jam:

???Push up on the green cartridge-release tab to release the cartridge. Remove the cartridge.

???Remove any slack from the ribbon. Reinstall the cartridge.

6 Press to resume printing.

Troubleshooting

4Carefully "fan" the paper to keep the sheets from sticking together (see page 29).

5Reload the tray. Do not load more than 30 sheets of paper (see upper limit line, , inside tray).

6 Re-install the tray, then press to resume printing.

???Clean the paper-feed rollers (page 26).

Troubleshooting

Troubleshooting

Troubleshooting

Printer-dock-status lights

Camera battery light

Troubleshooting

Transfer light

Still having problems?

Visit www.kodak.com/go/support, or see Chapter 8, Getting help, or contact your camera manufacturer.

9 Appendix

Printer dock specifications

For more specifications, visit www.kodak.com/go/printerdocks.

Appendix

Printer dock specifications

Important safety instructions

CAUTION:

Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Kodak AC adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.

???The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit www.kodak/go/accessories.

???Use only a USB-certified computer equipped with a current-limiting motherboard. Contact your computer manufacturer if you have questions.

???If using this product in an airplane, observe all instructions of the airline.

???When removing the battery, allow it to cool; it may be hot.

???Read and follow all warnings and instructions supplied by the battery manufacturer.

???Use only batteries approved for this product to avoid risk of explosion.

???Keep batteries out of the reach of children.

???Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak.

???Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.

Appendix

???Remove the battery when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support.

???In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak customer support.

???Dispose of batteries according to local and national regulations. Visit www.kodak.com/go/kes.

???Do not charge non-rechargeable batteries.

For more information on batteries, see www.kodak.com/go/batterytypes.

Extending battery life

???Limit activities such as reviewing pictures/videos on the camera screen, using the camera screen as a viewfinder, and excessive use of the flash.

???Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean, dry cloth before loading batteries in the camera.

???Battery performance is reduced at temperatures below 5?? C (41?? F). When using your camera in cold weather, carry spare batteries and keep them warm. Do not discard cold batteries that do not work; when they return to room temperature, they may be usable.

???If you are getting fewer than 20 pictures per charge with your Kodak Ni-MH rechargeable digital camera battery, (and if none of the tips above seem to help), consider refreshing the battery (see page 9) or replacing it.

For more information on batteries, see your camera user???s guide, or visit www.kodak.com/go/batterytypes.

Appendix

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare software CD and the printer dock firmware (the software that runs on the printer dock). Visit www.kodak.com/go/printerdockdownloads.

Additional care and maintenance

???Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer dock.

???If you suspect water has gotten inside the printer dock, turn off the printer dock and remove the paper tray and color cartridge. Allow all components to air-dry for at least 24 hours before using the printer dock again.

???Connect a tripod directly to the camera; do not connect a tripod to the camera dock or printer dock.

???Service agreements are available in some countries. Contact a dealer of Kodak products for more information.

???This equipment is considered to be electronic equipment and contains parts that are recyclable. As such, this equipment should not be incinerated or disposed of in a landfill. Disposal of this equipment may be regulated in some jurisdictions due to environmental considerations.

???Disposal of color cartridges should be done in accordance with applicable regulations.

???For more disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org.

Appendix

Limited Warranty

Kodak warrants Kodak consumer electronic products and accessories ("Products"), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase.

Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.

Limited warranty coverage

Warranty service is only available from within the country where the Products were originally purchased. You may be required to ship Products, at your expense, to the authorized service facility for the country where the Products were purchased.

Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under the warranty.

If replacement parts are used in making repairs, those parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodak???s control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak???s operation, maintenance or repacking instructions, failure to use items supplied by

Appendix

Kodak (such as adapters and cables), or claims made after the duration of this warranty.

Kodak makes no other express or implied warranty for this product, and disclaims the implied warranties of merchantability and fitness for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law.

The option of repair, replacement, or refund is Kodak???s only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase, use, or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.

Your rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.

Outside the United States and Canada

In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.

Appendix

Regulatory information

FCC compliance and advisory

Kodak EasyShare G610 printer dock

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user???s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.

Appendix

Canadian DOC statement

DOC Class B compliance???This Class B digital apparatus complies with Canadian ICES-003.

Observation des normes-Classe B???Cet appareil num??rique de la classe B est conforme ?? la norme NMB-003 du Canada.

Australian C-Tick

N137

Waste Electrical and Electronic Equipment labeling

In the European Union, do not discard the product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.

Korea Class B ITE

VCCI Class B ITE

Index

cable, 19

connector (from device), i connector (to computer), ii, 19

V

VCCI compliance, 49

W warranty, 46 Windows OS

installing software on, 17