Precautions

IMPORTANT

The exclamation point within an equilateral triangle is intended to alert the user to the presence fo important- operating and maintenance(servicing) instructions in the literature accompanying the appliance.

These labels can be found on the unit's rear panel.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Ces ??tiquelttes se trousent sur le fond de Pappareil.

CAUTION

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

CAUTION

???Use of controls or adjustments or performance of procedures other than those specified here may result in hazardous radiation exposure.

???The use of Optical instruments with this product will increase eye hazard.

CAUTION

CAUTION : LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.

This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to repair. Refer all servicing to qualified personnel.

The following caution appears on rear of the unit.

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID

CAUTION EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER

COVERSHIELD)

VORSICHT : LASERS TRAHLUNG, WENN ABDECKUNG

GE??FFENT NIICHT DEM STRALHL

AUSSETZEN!

ADVARSEL : LASERSTR??LING VED ??BNING UNDG??

UDS?? TTEL SE FOR STR??LING.

VARNING : LASERSTR??L NING N??R DENNA DEL ??R

??PPNAD BETRAKTA EJ STR??LEN.

VARO! : AVATTAESSA ALTISTUT LASERS??TBL

YLLE ??L?? KATSO S??TEESEN

This product is in conformity with the EMC directive and low-voltage directive.

???READ THESE INSTRUCTIONS - All the safety and operating instructions should be read before the product is operated.

???KEEP THESE INSTRUCTIONS - The safety and operating instructions should be retained for future reference.

???HEED ALL WARNINGS - All warnings on the product and in the operating instructions should be adhered to.

???FOLLOW ALL INSTRUCTIONS - All operating and use instructions should be followed.

???CLEAN ONLY WITH A DAMP CLOTH - Unplug this product from the wall outlet before cleaning. The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzene secticides or other volatile liquids since they may corrode the cabinet.

???DO NOT USE THIS APPRATUS NEAR WATER - Do not use this product near water - for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

???ACCESSORIES - Only use the attachments/accessories specified by the manufacturer.

???CART - Use only with a cart, stand,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

ImportantSafety

Instructions

???VENTILATION - Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

???GROUNDING OR POLARIZATION - Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your oulet, consult an electrician for replacement of the obsolete outlet.

???POWER-CORD PROTECTION - Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

???LIGHTNING - Unplug this apparatus during lightning storms or when unused for long periods of time.

???SERVICING - Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled over, objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

???HEAT - Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.

TableofContents

Before You Start

4 Table of Contents

What's in the box

Thank you for buying this product. Please confirm that the following accessories are in the box when you open it.

Accessories

RF cable

Audio/Video cable

Remote control

AA dry cell batteries x 2

Putting the batteries in the remote control

BeforeYouStart

Using the remote control

Keep in mind the following when using the remote control :

???Make sure that there are no obstacles between the remote and the remote sensor on the unit.

???Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit's remote sensor.

???Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.

???Replace the batteries when you notice a fall off in the operating range of the remote.

NOTE

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

???Don't mix new and old batteries together.

???Don't use different kinds of batteries together-although they may look similar, different batteries may have different voltages.

???Make sure that the plus and minus ends of each battery match the indications in the battery compartment.

???Remove batteries from equipment that isn't going to be used for a month or more.

???When disposing of used batteries, please comply with governmental regulations or environmental public instruction???s rules that apply in your country or area.

BeforeYouStart

Compatible Discs

Any disc that displays one of the following logos should play in this system. Other formats, including DVD-RAM, DVD-ROM, DVD-Audio, SACD and CD-ROM will not play.

DVD Video compatibility

??? Single-sided or double-sided discs.

??? Single layer or dual layer discs.

??? Dolby Digital, DTS, MPEG or Linear PCM digital audio.

???MPEG-2 digital video Discs are generally divided into one or more titles. Titles may be further subdivided into chapters.

DVD-R compatibility

??? This unit can play DVD-R discs recorded as DVD video format.

Audio CD compatibility

???12cm or 8cm discs

???Linear PCM digital audio

???CD-Audio, CD-R and CD-RW

formatted CDs are divided into tracks.(This unit can play CD-R and CD-RW discs recorded in CD Audio or Video

CD format, or Kodak picture CD files.)

DVD Video regions

All DVD Video discs carry a region mark on the case somewhere that indicates which region of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel. Discs from incompatible regions will not play in this player. Discs marked ALL will play in any player.

DVD+R/RW compatibility

??? This unit can play DVD+R and DVD+RW discs recorded as DVD video format.

??? Also this unit can record the video and audio signal in DVD+R or DVD+RW disc.

MPEG4 CD compatibility

???Also this can play MPEG4 disc.

JPEG CD compatibility

??? JPEG Photo in Discs.

CAUTION

???DVD-R and CD-R/RW discs recorded using a personal computer may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player's lens.

???If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc.

???Some of MPEG4 movies could not be played depending on the encoding methods.

1

2

3

4

5

6

7

DISC TRAY

Put a disc to be played in here.

OPEN/CLOSE

To open or close the disc tray.

PLAY/PAUSE

Press to start or pause a disc playing.

STOP

Press to stop a disc playing.

RECORD

Press to start a disc recording.

FL DISPLAY

Displays operation status.

AUDIO IN

Connect to Audio Output of camcorder.

8 COMPOSITE VIDEO IN

Connect to Composite Video Output of camcorder.

9 DV IN

Digital input jack for use with a digital video camcorder. This jack is for connection to DV camcorder only. It is not compatible with other digital equipments.

10 NEXT (Skip Forward)

To skip to the next chapter or track.

11 STANDBY/ON

To switch the unit on or into Standby.

12 PREVIOUS (Skip Backward)

To skip to the previous chapter or track.

1 TIMER Recording Indicator

Lights when timer recording is on.

2 ANGLE

Indicates the current disc being played is viewed as multi angle.

This function only works for discs having scenes recorded at different angles.

3 DOLBY DIGITAL Indicator

Indicates Dolby Digital 5.1CH playback.

4 TITLE Indicator

Title number for DVD playback.

5 CHAPTER Indicator

Chapter number for DVD playback.

6 BILINGUAL Indicator

Illuminates when receiving a bilingual broadcast.

7 STEREO Indicator

Illuminates when receiving a stereo broadcast.

8

9

10

11

12

13

ROTATION

Rotates when the disc is spinning.

HDD Indicator

Indicates the HDD mode.

REPEAT Indicator

Illuminates when the current play mode is under repeat title, chapter, track, A-B respectively.

DVD Indicator

Indicates the DVD mode.

DTS Indicator

Illuminates when the format of digital audio output is DTS.

OPERATING Information

Indicates title, Chapter and Track number and Time, TV channel.

1 AC POWER CORD

Connect to the wall outlet.

2 DIGITAL AUDIO OUT

Connect COAXIAL OUT to Digital Audio Input (coaxial type) of Audio AMP.

Or connect OPTICAL OUT to Digital Audio Input (optical type) of Audio AMP.

3 COMPONENT VIDEO OUT

Connect to Component Video Inputs of TV.

4 AUDIO IN

Connect to Audio Output of VCR or Set-Top Box.

5 VIDEO IN

Connect VIDEO to Composite Video Output of VCR or Set-Top Box.

Or connect S-VIDEO to S-Video Output of VCR or Set-Top Box.

6 VIDEO OUT

Connect VIDEO to Composite Video Input of TV or monitor.

Or connect S-VIDEO to S-Video Input of TV or monitor.

S-Video provides better picture quality than composite video.

7 5.1 CH AUDIO OUT

Connect to analog Audio Inputs of Audio AMP.

If you want to connect to TV, connect FRONT L and R to Audio Inputs of TV.

8 ANT IN

Connect to external antenna.

9 ANT OUT

Connect to Antenna Input of TV.

10 EURO AV OUT

Connect to Euro AV input of TV.

11 EURO AV IN/OUT

Connect to Euro AV in/out of AV equipment such as VCR, DVD player, etc.

Controls&Display

Remote Controller Unit

A

A-B

To repeat a certain section.

ANGLE

To view with a different frame angle.

ARROW ()

To select an item of menu.

AUDIO

To select the audio language or audio channel when playing a DVD disc.

You can also change the audio channel of the broadcast.

???If the NICAM broadcast is bilingual, you can select the language.

???If the NICAM broadcast is stereo, you can switch between NICAM stereo and Mono audio.

B

BOOK MARK

To create 9 numerical bookmarks.

C

CHANNEL DOWN/UP

Used to select the preset TV channels.

CL(CLEAR)

Used to remove the preset program on the timer recording list.

D

DISPLAY

To view the Title, Chapter, Track information or Subtitle Language, Audio Language.

DVD/HDD

To switch between DVD mode and HDD mode.

E

EDIT

To edit a title or chapter of disc.

ENTER

Used to select the menu item.

H

HIDE

Used to hide a chapter.

M

MENU

Used to display the contents menu of the loaded DVD disc or the program list of HDD.

MUTE

To turn on/off audio outputs.

N

NEXT ( )

To skip to the next chapter or track.

NUMERIC (0~9)

Used from the menu to select, Title/Chapter search and direct track number.

O

OPEN /CLOSE ( )

Press button to open or close the disc tray.

If pressed under STANDBY, power is automatically turned on.

P

PAUSE ( )

When you press this button during playback, you can view the still picture.

Each time you press this button, you can see one frame at a time.

PLAY ( )

To play the loaded disc or HDD.

PREV ( )

To skip to the previous chapter or track.

Controls&Display

R

RANDOM

To play tracks of Audio CD in random order.

REC (Record)

To start recording.

REC MODE

To select the record quality/recording time.

REPEAT

To select a repeat mode.

REPLAY

To play back again from the scene of previous 10 seconds.

It is a useful function to learn a foreign language.

RESTART

To play back again from the beginning of HDD program.

S

SCAN FWD ( )

Press for fast forward scanning during playback.

SCAN REV ( )

Press for fast reverse scanning during playback.

SETUP

To change the initial settings.

SKIP

For moving to a scene of after 30 seconds.

SOURCE

To select an external audio and video input to use for recording.

STANDBY/ON

Activates the unit POWER ON or into STANDBY.

STEP FWD

Each time you press this button, you can see the next video frame.

STEP REV

Each time you press this button, you can see the previous video frame.

Controls & Display 11

Turning on and off

Gettingstarted

Displaying disc information on screen (OSD)

You can display the playback status on TV screen as follows ; Title, Chapter number, Playing time.

language and Subtitle appear on TV screen. You can change the subtitle language, chapter, and so on using ,,, ENTER button.

Selecting the HDD or DVD for playback and recording

Screen Saver

If a bright picture does not move for a long time, the TV may be damaged. If this state is continued on longer than 5 minutes, the screen saver works automatically.

The screen saver protects the CRT (Cathode Ray Tube) from damage by displaying a moving HDD logo continuously on the screen.

Playing a DVD disc

1 Press OPEN/CLOSE button to open the disc tray.

Put a disc on the disc tray with logo-printed side up.

2 Press OPEN/CLOSE button again to close the disc tray.

The disc will be loaded automatically.

3 The TV screen shows disc menu.

4 Select the desired item by using ,,, or 0 to 9 button, then press ENTER button to start playback.

Playing a DVD+RW or DVD+R disc

1 Load a DVD+RW or DVD+R disc.

The menu screen is displayed automatically.

Playing an Audio CD

1 Load an Audio CD.

The first song is played back automatically. The track list is displayed on the TV screen.

<Audio CD>

2 Select the desired song by using or button.

3 Press PLAY button to start playback.

If you press or button during playing back, you can hear the next song or the previous song.

2

3

4

Select the desired program by using or button.

Press ENTER button to start playback.

Press MENU or TITLE button to return to the menu screen.

You can see the thumbnail picture of selected file on the right window.

NOTE

???Some of MPEG4 movie could not be played depending on encoding method.

3

4

Select the desired program by using or button in the program list.

Press PLAY button.

It starts to play the selected program.

Fast Forward/Backward

Use this function to play the DISC or HDD contents in fast forward or fast reverse.

There is no sound during searching.

speed changes as below.

AdvancedPlayback

Slow Forward/Backward (DVD only)

Use this function to play the DISC contents in slow forward.

or forward.

Each time you press the button, playback speed changes as below.

Skip Forward/Backward

Use this function to move to the next or previous chapter for DVD, track for Audio CD.

chapter or track.

Frame by Frame Playback (DVD only)

NOTE

???There is no sound during viewing Frame playback or Slow playback.

???Audio CD do not have Frame Playback and Slow Playback feature.

Program Playback (Audio CD only)

This feature lets you program the play order of folders, tracks on a disc.

1 Load an Audio CD.

The first song is played back automatically. The track list is displayed on the TV screen.

A mark is put on the selected song.

Press ENTER button to add the selected songs to the program list.

The mark on the selected songs is changed to the triangle.

Only the selected songs are displayed on the list window.

ENTER button.

Selecting Subtitles (DVD only)

It is possible to change the subtitle language to a different language from the one selected at the initial settings. This operation works only with discs on which multiple subtitle languages are recorded. If the loaded disc supports multiple subtitles, you can select the subtitle language.

1 Press SUBTITLE button during playing.

The subtitle is displayed on the bottom of screen.

AdvancedPlayback

Selecting Audio Languages (DVD only)

It is possible to change the audio language to a different language from the one selected at the initial settings. This operation works only with discs on which multiple audio languages are recorded. If the loaded disc supports multiple audio languages, you can select the audio language.

of screen.

The audio language is changed.

NOTE

???Some discs only allow you to change subtitle or audio language from the disc menu.

AdvancedPlayback

Repeating a Title, Chapter

It is possible to repeat the chapter/title for DVD or track/disc for Audio CD.

top of screen.

NOTE

???With some DVD discs, there may be times when repeat playback is not possible.

A-B Repeat

(DVD/Audio CD disc only)

Use this function to repeat the play of a selected segment. This is very useful for studying foreign languages because it repeats the selected segment until canceled.

NOTE

???We recommend you set up the desired segment within a minimum 5 seconds for smooth repeat play.

ZOOM screen (DVD/HDD only)

The zoom function allows you to enlarge DVD or HDD screen image up to 8 times.

AdvancedPlayback

Switching the Camera Angle

When a DVD contains recorded multiple angles of a scene, you can select the Angle function.

NOTE

???You can only change the angle for DVDs that provide multiple angles of scenes.

???The angle function will not work on DVD video discs that do not contain recorded multiple angles.

Direct Search (DVD only)

You can select a specific chapter or title to play. Also you can move to a specific time in a track or title.

screen.

Chapter Search

1Select ???CHAPTER??? by pressing , button.

2Enter the chapter number by using numeric 0 to 9 button.

It starts to play back from the specified chapter.

Time Search

1Select ???TIME??? by pressing , button.

2Enter the time by using numeric 0 to 9 button.

For example, if you want to go to 00:31:25, press the numeric buttons in this order (0, 0, 3, 1, 2, 5).

It starts to play back from the specified time.

Bookmark

You can find the desired scene of movie easily.

Basic recording

To record TV programs, you should search TV channels first.

Recording

6 Press STOP button to stop your recording.

NOTE

???A DVD+R/DVD+RW can record for up to 6 hours, up to 49 titles.

???If your source is copy-protected, you will not be able to record it.

OTR (One touch Timer Recording)

Timer Recording

For timer recording, the clock, date, and stations must be set correctly.

If you want to record on DVD, load a DVD+RW or DVD+R disc with enough free space for the recording.

1 Press SETUP button.

You can see the timer recording screen. This screen shows all the timer programs currently set.

button to change the value.

Date

Press or button to select how often you want to make the recording, for example, once, daily, weekly.

If you want the once recording, enter the date by using 0 to 9 button.

Start Time

Enter the start time by using 0 to 9 or , button.

End Time

Enter the end time by using 0 to 9 or , button.

Source

Select the Source by using or button. If you want to record the TV program, select the TV source by using or button.

And then select the TV channel by pressing

CHANNEL-/+ button.

REC Mode

Select REC MODE by using or button.

REC To

Select HDD for hard disk recording or DVD for DVD recording by using or button.

NOTE

???You can switch on your DVD Recorder again if you want to set the timer to record another program. Remember to switch off the DVD Recorder when you have finished.

???To stop a recording which has already started, press STOP button.

???You can pre-program the timer recording up to 8 programs.

Recording

Timer review - changing and erasing record settings

1 Press SETUP button.

You can see the timer recording screen. This screen shows all the timer programs currently set.

Recording

Recording from a DV (Digital Video) camcorder

You can record the contents of DV tape from a DV camcorder.

Make sure your digital camcorder is connected to DV IN jack on the front panel.

Also turn on your DV camcorder and set it to PLAY (or VCR) mode.

source is changed :

If you want to record the TV program, select TV mode.

And choose the station you want to record by pressing CHANNEL ??? or CHANNEL + button.

when the information of DV is displayed on the top of screen. If the information of DV disappears, press DISPLAY button to show it.

NOTE

???Depending on the connected camcorder, you may not be able to control it using the remote control supplied with this recorder.

Timeshift Recording

You can store a TV program in the HDD storage cache temporarily.

Do not miss a scene from a live broadcast. If the telephone rings while you are watching

your favorite live broadcast, just press TIMESHIFT or PAUSE button before answering the phone. The timeshift function will be activated and the broadcast is then recorded for later viewing.

After the phone call or viewing interruption, press PLAY or button to watch the program.

Recording

Copying (from HDD to DVD)

Use the copying feature of this recorder to :

???Back up important recordings stored on the HDD to a DVD.

???Make a DVD copy of a recording on the HDD to play in another DVD player.

1Load a DVD+RW or DVD+R disc with enough free space for the recording.

If the DVD menu is displayed on TV screen automatically, press STOP button twice to stop.

2Press DVD/HDD button to select the HDD mode.

3Press PLAY button. The program list of HDD appears on screen.

4Select the program to copy by usingor button, and Press button.

The edit menu appears on screen.

5

6

Select ???Dubbing??? by using or button, and press ENTER button.

It asks for confirmation again.

Press ENTER button after selecting ???Yes???.

Editing (DVD+R/DVD+RW/HDD)

Editing the title of DVD+R/DVD+RW

<DVD+RW>

<DVD+R>

Erase Title

Select ???Erase Title??? by using or button, and press ENTER button.

Protect Title

You can prevent the contents of title from being deleted by mistake.

Select ???Protect Title??? by using or button, and press ENTER button.

If you want to unprotect the protected title, press ENTER button after selecting ???Unprotect Title???.

Protect Disc

You can prevent the contents of disc from being deleted by mistake.

Select ???Protect Disc??? by using or button, and press ENTER button.

If you want to unprotect the protected disc, press ENTER button after selecting ???Unprotect Disc???.

Close Disc (DVD+R only)

If you want to make your DVD+R disc compatible with the other DVD Player, you should go on Close Disc operation. Select ???Close Disc??? by using or button, and press ENTER button.

It takes a couple of minutes to finalize the disc.

-This function only works once in DVD+R disc.

-If a DVD+R disc has been finalized, you can not record or edit the DVD+R disc any more.

Make Compatible (DVD+RW only)

If you want to make your DVD+RW disc compatible with other DVD+RW recorder, you should go on Make Compatible operation.

Select ???Make Compatible??? by using or button, and press ENTER button.

It takes a couple of minutes to make the disc compatible.

-This function only works in DVD+RW disc.

-If you do not make your DVD+RW compatible, you can only play back it in this DVD Recorder.

Play Full Title

Select ???Play Full Title??? by using or button, and press ENTER button to play back the entire title (including hidden chapters) from the disc.

5Select ???Show Chapter??? by using or button, and press ENTER button at the chapter where you want to show.

Editing (DVD+R/DVD+RW/HDD)

Change Thumbnail

You can create a new thumbnail or change the thumbnail for the selected title.

Select ???Change Thumbnail??? by using

orbutton, and press ENTER button at the point where you prefer to be the thumbnail.

Editing the program of HDD

The edit menu appears on screen.

Delete

1Select ???Delete??? by using or button, and press ENTER button. It asks for confirmation again.

2Press ENTER button after selecting ???Yes???.

Dubbing

You can copy a program from HDD to DVD.

1Load a DVD+RW or DVD+R disc.

2Select ???Dubbing??? by using or button, and press ENTER button. It asks for confirmation again.

3Press ENTER button after selecting ???Yes???.

32 Editing (DVD+R/DVD+RW/HDD)

???Edit Name

1Select ???Edit Name??? by using or button, and press ENTER button. The keyboard will show on the screen.

2Select a letter which you want to input by using , , , button, and press ENTER button to confirm it.

3Repeat step 2.

The maximum length of the program name is up to 14 characters.

4After the inputting of letters is finished, press ENTER button after selecting ???Done???.

Once the initial settings have been completed, the DVD recorder can always be operated under the same conditions whenever the power is switched on. These settings are called SETUP data that are easily modified and stored using the SETUP menu. The SETUP menu includes the information for System, Video, Audio, Security, Record, Disc.

Basic Operations

Press SETUP button during stop mode. And use , , , and ENTER button to navigate and select options. The current setting for any option is marked with a colored box.

NOTE

???Depending on the disc, some setup menu selections may not work properly.

UsingtheSetupMenu

SYSTEM

1 OSD LANGUAGE

This item is used to select the language for On-Screen Display messages that will be displayed on the TV screen. When your desired language is selected, all OSD messages are displayed in the selected language.

2 SET TIME

Automatic clock setting

Some TV channels broadcast time signals together with the program. This recorder can use these signals to set the clock automatically.

1Press ENTER button after selecting ???Automatic???.

It starts to search the preset channel that broadcasts a clock signal automatically.

2If the time could not be set automatically, select ???Manual???.

Manual clock setting

If no station in your area are broadcasting time signals, you can set the clock manually.

1Enter the date & time by using 0 to 9 or , , , button.

Use 0 to 9 or , button to change the value in the highlighted field.

Use , button to move from one field to another.

Using the Setup Menu 33

UsingtheSetupMenu

2 Press ENTER button after selecting ???Save???.

3 FACTORY RESET

Returns the DVD Recorder back to factory default settings.

1 Press ENTER button after selecting ???Start???.

It asks for the password.

2 Enter the current password in 4 digits by using 0 to 9 button.

If you have not changed the password, enter 1, 2, 3, 4.

The setup menu screen is exited automatically after factory reset.

VIDEO

1 CHANNEL SCAN

This recorder has a built-in TV tuner for recording TV programs.

Press ENTER button after selecting ???Start???.

It will search channels automatically. If the broadcasting is found during auto searching, it is stored automatically.

NOTE

???While doing Channel Search, it will erase and replace all previously stored channels.

2 CHANNEL SETUP

(If there is no captured channel, this feature is not available.)

1 Press button, and the channel list will show on the TV screen.

2 Select the channel you want to modify by using or button.

The information of the selected channel will show on the right of the channel list.

Changing the program number

You can change the program number assigned to the current preset.

1Select ???Prog Num??? by using or button.

2Enter the new program number by using 0 to 9 button.

Editing the channel name

1Press or button after selecting ???CH Name??? by using or button.

The keyboard will show on the screen.

2Select a letter which you want to input by using , , , button, and press ENTER button to confirm it.

3Repeat step 2.

The maximum length of the channel name is up to 4 characters.

4After the inputting of letters is finished, press ENTER button after selecting ???Done???.

TV System

Set the TV system used for the current channel.

1Select ???TV System??? by using or button.

2Select the TV system by using or button.

Decoder

If the current channel is scrambled, requiring a Canal+ decoder connected to the A/V IN connector, set this to ???On???.

UsingtheSetupMenu

Fine tune

If the captured signal is not good, you can tune the channel fine.

1Select ???Fine tune??? by using or button.

2Tune the channel fine by pressing or button.

Each time or button is pressed, the channel frequency decreases or increases by 50KHz.

3 Press ENTER button after selecting ???Save??? using button if all the settings are correct.

4 Deleting a channel

You can delete a captured channel on the channel list.

1Select a channel on the channel list by using or button.

2Press CL button. The channel is deleted.

5 Sorting channels

(If there is no captured channel, this feature is not available.)

You can sort the channel???s position on the channel list.

1Select a channel on the channel list by using or button, and press button.

2Select ???Prog Num??? by using or button.

Enter a desired program number by using 0 to 9 button.

3Press ENTER button after selecting ???Save??? using button.

The menu options appears on TV screen.

4Press ENTER button after selecting ???Insert??? from options.

UsingtheSetupMenu

3 SCREEN FORMAT

If you have a widescreen TV, select the ???16:9 Wide??? setting. The wide widescreen DVD disc is shown using the full screen area. When playing the DVD disc recorded in conventional format (4:3), the settings on your TV will determine how the material is presented. (See the manual that came with your TV for details on what options are available.)

If you have a conventional TV, choose either ???4:3 Letter Box??? or ???4:3 Pan Scan???.

In Letter Box mode, the widescreen DVD disc is shown with black bars at the top and bottom of the screen.

Pan Scan chops the sides off widescreen material to make it fit the 4:3 screen (so even though the picture looks larger on the screen, you are actually seeing less of the movie).

NOTE

??? Some disc will not allow you to change the screen format.

4 VIDEO OUTPUT

Set to ???YCbCr On??? to view in component video via Y/ Cb/ Cr connector. When using AV Euro connector RGB signal, set to ???RGB On???.

5 COUNTRY SETUP

Press ENTER button after selecting your country using or button.

AUDIO

5 EQUALIZER

You can adjust the equalization curve and store it.

1Select the frequency of which you want to adjust the tone by using or button.

2Press or button to adjust the equalization.

3Press ENTER button after selecting ???SAVE??? to store the equalization curve.

SECURITY

1 RATING

This function is to disable the playing of specified DVD discs that are unsuitable for children.

There are a total of 8 levels. If the level is 8, the contents of the disc are suitable for adult. If the level is 1, the contents of the disc are suitable for children.

Used to adjust the level of parental lock. Once selected, whenever you play a disc, the selected rating level is compared to the level on the disc. If the level you selected is greater than the level of the disc, you may play the loaded disc. If not, you may not play the disc. To set appropriate rating level do the following instructions.

1 Press ENTER button after selecting the proper rating level by using

or button.

The password window appears on TV screen.

UsingtheSetupMenu

2 Enter the current password in 4 digits by using 0 to 9 button. A rating level change will be done.

If you have not changed the password, enter 1, 2, 3, 4.

2 SET PASSWORD

1 Press button after selecting ???Change??? .

The password window appears on TV screen.

2 Enter the current password in 4 digits by using 0 to 9 button.

3 Enter the new password in 4 digits by using 0 to 9 button.

4 Re-enter the new password for verify. The password is changed.

1 RECORD QUALITY

The record quality offers 5 quality level :

HQ : High Quality, you can record for up to 1 hour in a blank disc.

SP : Standard Play, you can record for up to 2 hours in a blank disc.

LP : Long Play, you can record for up to 3 hours in a blank disc.

EP : Extended Play, you can record for up to 4 hours in a blank disc.

SLP : Super Long Play, you can record for up to 6 hours in a blank disc.

2 DVD AUTO CHAPTER

When ???Auto Chapter??? is set to ???5Min???, chapters are created automatically within a title at five-minute intervals.

3 TIMER RECORD

See section ???Timer Recording???.

1 AUDIO LANGUAGE

Set this value to the preferred audio language. If an audio language is selected, whenever you start playing a new disc, the selected audio language is played. (if the selected language is contained in the disc)

2 SUBTITLE LANGUAGE

Set this value to the preferred subtitle language. If a subtitle language is selected, whenever you start playing a new disc, the selected subtitle language is played. (if the selected language is contained in the disc)

3 MENU LANGUAGE

Set this value to the preferred disc menu language. If a disc menu language is selected, whenever you start playing a new disc, the selected disc menu language is played. (if the selected language is contained in the disc).

4 AUTO PLAY

Set to ???On??? to play the disc automatically whenever it loads.

5 INITIALIZE DVD (DVD+RW only)

When you first load a blank DVD+RW disc, you should initialize it.

1 Press ENTER button after selecting ???Start??? by pressing button.

It asks for confirmation again.

2 Press ENTER button after selecting ???Yes???.

NOTE

???Initializing a disc will erase everything recorded on it. Make sure there is nothing on the disc that you want to keep.

???You may not be able to re-Initialize a disc if it was initialized on other brand DVD recorders.

DVD+RW disc compatible with the other DVD Player, you should go on FINALIZE operation.

1 Press ENTER button after selecting ???Start??? by pressing button.

It asks for confirmation again.

2 Press ENTER button after selecting ???Yes???.

It takes a couple of minutes to finalize the disc.

NOTE

???If a DVD+R has been finalized, you can not record or edit the DVD+R any more.

???If DVD+R disc is loaded, this function works same as ???Close Disc??? on disc editing menu.

???If DVD+RW disc is loaded, this function works same as ???Make Compatible??? on disc editing menu.

UsingtheSetupMenu

8 SCANDISK HDD

You can scan the disk of HDD whether the data is broken or not.

1 Press ENTER button after selecting ???Start??? by pressing button.

It asks for confirmation again.

2 Press ENTER button after selecting ???Yes???.

It starts to scan the disk of HDD.