KODAK EASYSHARE SPORT Camera

/ C135

Extended user guide

www.kodak.com

For interactive tutorials:

www.kodak.com/go/c135demos

For help with your camera:

www.kodak.com/go/c135support

Eastman Kodak Company

Rochester, New York 14650

?? Eastman Kodak Company, 2012

All screen images are simulated.

Kodak, EasyShare Sport, Max, Perfect Touch, and Pulse are trademarks of Eastman Kodak Company.

4H8874_en

Product features

Front view

Shutter button

Video Record

Self-timer/Video light

On/Off

Flash

Lens

Microphone

Beeper

1 Setting up your camera

Attaching the wrist strap

Setting up your camera

Opening the doors

1

2

Setting up your camera

Loading the AA batteries

IMPORTANT: Do not attempt to close both doors at the same time or leakage may occur when the camera is exposed to water.

Setting up your camera

Inserting an SD or SDHC Card (not included)

You must insert an SD or SDHC Card (up to 32 GB) to store pictures/videos.

NOTE: Your camera also accepts EYE-FI Cards, X2 or higher, with a firmware version of 4.5174 or higher. View and update firmware using the Eye-Fi Center Software that accompanies the card.

CAUTION:

A card can only be inserted one way; forcing it may cause damage. Inserting or removing a card while the camera is on may damage the pictures, the card, or the camera.

1 Turn off the camera.

2 Insert a card until

it clicks.

3 Turn on the camera.

SD/SDHC Card (Accessory)

Purchase accessories www.kodak.com/go/accessories

Setting up your camera

Closing the doors

1Close inner battery door.

2Close outer battery door.

Setting up your camera

Turning on the camera

Setting the language and date/time

Language:

to change.

OK to accept.

Date/Time:

At the prompt, press OK.

to change current field. for previous/next field.

OK to accept.

NOTE: To change language in the future, use the Setup Menu (see page 36).

2 Installing, setting up software

Start sharing???in 2 easy steps

Installing the KODAK Share Button App

IMPORTANT: To enable the camera Share button for email and social network sharing, you must install and set up the KODAK Share Button App.

1 Verify that the computer is connected to the Internet.

2 Turn on the camera.

3Using the KODAK Camera USB Cable, connect the camera to a computer USB port.

4Watch your computer???when the KODAK Camera Setup App prompts you, click Install Now. (If your computer asks you to allow the KODAK Camera Setup App to run, click Allow.)

5 Click Finish.

Did you successfully install the software?

See ???Setting up the Share Button App (one-time setup)??? on page 8.

Did you have trouble installing the software?

See ???If software installation does not start after several minutes??? on page 8.

Installing, setting up software

If software installation does not start after several minutes

1 Verify that the computer is connected to the Internet.

2 Open My Computer.

3 Open the KODAK Setup App to start the installation.

If the installer still doesn???t start

1 Download it from www.kodak.com/go/camerasw.

2 After it???s downloaded, double-click to install it.

Setting up the Share Button App (one-time setup)

After you install the Share Button App on your computer and click Finish (see page 7), the App automatically launches.* It prompts you through a one-time setup of your email and social networking preferences. The addresses and sites that you choose appear on your camera when you press the Share button.

If the Share Button App doesn???t launch

The camera may have timed out. Simply unplug the camera and turn it off. Plug it back in and turn it on. When the App launches, perform the one-time setup, above.

Installing, setting up software

A helpful hint: adding new email addresses to your camera

For future reference, the easiest way to add email addresses to your camera is using the Share Button App on your computer.

1 Turn on your camera.

2Using the KODAK Camera USB Cable, connect the camera to a computer USB port.

The Share Button App starts.

3 Click Email List Setup.

4Add email addresses.

The next time you connect the camera to the computer, the email addresses are added to your camera.

After setting up the Share Button App

Congratulations???you???re ready to share!

???Take some pictures/videos (see page 10).

???Choose pictures/videos to share (see page 19).

???Connect the camera to your computer (see page 7).

Each time you connect:

???Pictures/videos are transferred to your computer

???The Share Button App emails and/or shares your chosen pictures/videos on your social networking sites.

3 Taking pictures/videos

Taking pictures

1The camera turns on in Auto mode.

(If it???s in a different mode, press until the LCD displays Auto .)

2 Compose the picture.

3 Press the Shutter button.

Taking a video

1Press the Video Record button to start recording.

2To stop recording, press the Video Record button again.

To review and work with videos, see page 22.

Taking pictures/videos

Reviewing the picture/video just taken

After you take a picture/video, the LCD briefly displays the picture or the first frame of a video.

While a picture/video appears on your camera screen, you may:

Play/pause a picture/video

Delete the current picture/video

NOTE: The camera captures audio during recording, but audio cannot be heard during playback on the camera. Audio can be heard when the video is played on a computer or when the camera is connected to a TV (see page 28).

To review pictures/videos anytime, see page 22.

Taking pictures/videos

Understanding the picture-taking icons

Self timer

Exposure compensation

Flash mode

Video/time remaining

Zoom indicator

Know when your batteries need attention

The battery level icon appears when the battery requires your attention.

Full

Three quarters

Half

One Quarter

Critical

Purchase extra batteries for your special event www.kodak.com/go/accessories

Taking pictures/videos

Using the digital zoom

1 Use the LCD to frame your subject.

2 To zoom in, press Telephoto (T).

To zoom out, press Wide Angle (W).

The zoom slider shows the zoom level on the LCD.

3 Take the picture.

NOTE: You may notice decreased image quality when using digital zoom.

Using the flash

Press the Flash button repeatedly until the LCD displays the desired flash mode.

Taking pictures/videos

Using different modes

Press until the LCD displays the mode that best suits your subjects and surroundings.

To take a video see page 7.

Taking pictures/videos

Using Scene (SCN) modes

Choose a Scene mode???for great pictures in practically any situation.

1 Press until the LCD displays SCN, then press OK.

2Press to view scene mode descriptions.

If the mode description turns off before you finish reading it, press OK.

3 Press OK to choose a Scene mode.

Taking pictures/videos

Using shortcuts

For quick access to the most popular capture and review functions:

1Press to select a shortcut such as Exposure Compensation or Self-timer. (You???ll see different functions in different modes.)

NOTE: Reset Exposure Compensation to zero (0) when finished.

2 Press to change a setting.

Shortcuts

Taking pictures/videos

Using the self-timer and burst

Use the self-timer when you want to be included in a picture or to ensure a steady Shutter button press. For best results, place the camera on a tripod or steady surface. You can turn on the self-timer using a shortcut (see page 16) or these steps:

1 Turn on the camera, then press to select Shortcuts.

2 Press the Menu button. Press to choose Self-timer, then press OK.

3 Press to choose a Self-timer setting:

Off???Self-timer is turned off.

10 Seconds???10 A picture is taken after a 10-second delay (so you have time to get into the scene).

2 Seconds??? 2 A picture is taken after a 2-second delay.

2 Picture Timer???2x The first picture is taken after a 10-second delay. A second picture is taken 8 seconds later.

Burst On???Take several pictures in succession

4Compose the scene. Press the Shutter button all the way down.

The camera takes the picture/pictures after the delay.

To take a video after a 2- or 10-second delay, use the same procedure.

Taking pictures/videos

Using the camera under water

The camera does not float. To prevent it from sinking, secure it to your wrist with the wrist strap (provided). You can also purchase a floating wrist strap at www.kodak.com/go/accessories. Tightly close and latch all doors to keep the camera waterproof. Do not open doors in water or when hands are wet. Waterproof integrity may be compromised if the camera is dropped.

IMPORTANT: Camera is waterproof up to 5 meters (16 ft)

For the best focus and color balance under water:

5 Press to change to Underwater mode , then press OK.

6 Press to choose Underwater Pictures or Underwater Videos, then press OK.

7When finished taking underwater videos/pictures, go back to Step 1 and choose a non-underwater setting.

After using the camera in water

IMPORTANT: Verify that inner and outer battery doors are tightly closed before exposing to water.

???Wipe off water or debris within 1 hour of submersion in water. If the camera was used in chemically treated water or saltwater, rinse it in fresh water, then dry with a a soft towel.

???If water has entered the camera, remove the card. Allow camera to air-dry for at least 24 hours before using.

4 Sharing pictures/videos

Sharing through social networks

It???s never been easier to share pictures on your favorite social networking sites.

IMPORTANT: To use the social networking features, you must first install and set up KODAK Software. (see page 7).

1 Press the Review button, then to find a picture.

2Press the Share button.

If it???s your first time, a Help screen appears.

3Press to choose a social networking site, then press OK.

A check mark appears. Repeat this step to choose more sites. (You can press OK again to remove a check mark.)

4To share other videos/pictures, repeat steps 2 and 3. When finished, press to choose Done, then press OK.

When you connect the camera to your computer, these pictures/videos are sent to the sharing destinations you chose (see page 8).

NOTE: If you send pictures to the same destinations each time, you may want to use the Fast Share feature, found in Share Button Settings (see page 36).

Sharing pictures/videos

Manage email addresses and KODAK PULSE Digital Frames

You can add, edit, or delete email addresses and KODAK PULSE Digital Frames on your camera.

1Press the Share button. Press to choose Manage Email Addresses (or Manage Frames), then press OK.

2To add an email address or frame, press to choose Add Email or Add Frame, then press OK. Use the on-screen keyboard to make the addition. See page 21. (Example: JohnDoe@domain.com)

To edit an email address or a KODAK PULSE Digital Frame, press to choose the address???s nickname or the frame, then press OK. Use the on-screen keyboard to make edits.

To delete an email address or frame, choose Delete Email or Delete Frame, then press OK. Press to choose the address or frame, then press OK so that a check mark appears. Press to choose Delete, then press OK.

3 When finished, press to choose Done, then press OK.

NOTE: You can also set up email addresses using the KODAK Share Button App (see page 9).

Tagging pictures/videos with keywords

You can tag pictures/videos with a keyword to make them easy to find, later. You can tag pictures using a shortcut (see page 16) or these steps:

1 Press the Review button, then to find a picture.

2 Press the Menu button. Press to choose Keyword Tag, then press OK.

3Press to choose an existing keyword or New Keyword (see Using the keyboard) to add a new one, then press OK.

4Press to add keywords to other pictures. When finished, press to choose Done, then press OK.

To return to picture-taking mode, press the Review button.

Sharing pictures/videos

Using the keyboard

The keyboard appears when you need it.

1 Press to choose a letter, then press OK.

2 When finished, press to choose OK, then press OK.

Marking pictures/videos for emailing

It???s simple to mark pictures/videos so that they???re ready to email using KODAK Software. First, create a new email address. (See page 20.)

1 Press the Review button. Press to find a picture.

2 Press the Share button.

3Press to find a nickname, then press OK.

To mark other pictures/videos with the same address, press , then press OK. To send the pictures/videos to more than one address, repeat this step.

To return to picture-taking mode, press the Review button.

When you transfer the marked pictures/videos to your computer, the software prompts you to send the pictures/videos.

NOTE: You can also set up email addresses using the KODAK Share Button App (see page 9).

Reviewing and editing

Deleting pictures/videos

1 Press the Review button.

2 Press for previous/next picture/video.

3 Press the Delete button.

4 Follow the screen prompts.

NOTE: To delete protected pictures/videos, remove protection before deleting. (See page 23.)

Using the undo delete picture feature

If you accidentally delete a video/picture, you may be able to use Undo Delete to retrieve it. After you select a video/picture for deletion, another screen appears. On that screen, select Undo Delete. The video/picture is no longer deleted.

NOTE: This feature is only available immediately after you delete a picture.

Protecting pictures/videos from deletion

1 Press the Review button.

2 Press the Menu button.

3 Press to choose Protect, then press OK.

4Press to choose Protect again, then press OK.

A check mark indicates that the picture/video is protected. Pressing OK again removes

the check mark. Press to protect other pictures/videos, or press to choose Done, then press OK.

???Press the Menu button to exit the menu.

CAUTION:

Formatting an SD or SDHC Card deletes all (including protected) pictures/videos.

Reviewing and editing

Viewing pictures/videos in different ways

Magnifying a picture

1 Press Telephoto (T) to magnify 2X???8X.

2Press to view other parts of a picture.

??? Press OK to return to 1X.

Viewing as thumbnails

1Press the Review button.

The camera shows the last picture/video that was taken.

2Press the Wide Angle (W) button to view pictures/videos as thumbnails. (Press it again to see more, smaller thumbnails.)

To view all pictures/videos, choose the All tab.

To sort by favorites, date, or keywords, press and choose the appropriate tab.

3To see a single picture/video, press to choose it. Then press the Telephoto (T) button.

???To select multiple pictures/videos, see page 32.

???Press the Review button to exit Review.

Reviewing and editing

A smarter way to find and enjoy your pictures

Tag pictures with a keyword (page 20) to make them easy to find, later.

1 Press the Review button.

2Press the Wide Angle (W) button to view pictures by thumbnail (or choose View Thumbnails shortcut).

3 Press to choose the All, Date, Favorite, or Keyword tab.

4Press to choose a picture or picture stack, then press OK.

Press Telephoto (T) see pictures in a stack or to see an individual picture. Press Wide

Angle (W) to see thumbnails or picture stacks. To return to picture-taking mode, press the Review button.

Reviewing and editing

Creating a slide show

Use Slide Show to display your pictures/videos on the LCD. You can play all pictures/videos, or choose pictures to include in the slide show.

Make a slide show

1Press the Review button. Select pictures (see page 32). If you select no pictures, all pictures are shown.

2 Press the Menu button, then to choose the Review tab.

3 Press to choose Slide Show, then press OK.

4Press to choose Begin Show, then press OK.

Each picture/video is displayed once. To interrupt the slide show, press OK. You can also determine the slide interval duration.

Play a slide show loop

When you turn on Loop, the slide show is continuously repeated.

1On the Slide Show menu, press to choose Loop, then press OK.

2 Press to choose On, then press OK.

3Press to choose Begin Show, then press OK.

The slide show repeats until you press OK or until the batteries are exhausted.

Reviewing and editing

Displaying pictures/videos on a television

You can display pictures/videos on a television, computer monitor, or any device equipped with a video input. To connect the camera directly to a television, use an A/V cable (may be sold separately). On your TV, select the source that corresponds to the camera cable input.

Purchase accessories www.kodak.com/go/accessories

NOTE: To control the audio portion of a video, use the camera or TV (or TV remote control) volume controls. Verify that the Video Out setting (NTSC or PAL) is correct (see page 36). The slide show stops if you connect or disconnect the cable while the slide show is running. Image quality may appear lower on a television screen than on a computer monitor or when printed.

Reviewing and editing

Using the menu button in review

1 Press the Review button, then press the Menu button.

2Press to choose a tab:

???Review

???Edit

???Setup

3 Press to choose a setting, then press OK.

4 Choose an option, then press OK.

Cropping pictures

You can crop a picture so that only the desired portion of the picture remains.

1 Press the Review button, then to find a picture to crop.

3Press Telephoto (T) to shrink the crop area or Wide (W) to enlarge it. Press to move the crop box. When satisfied with the crop box, press OK.

4Follow the screen prompts.

The picture is cropped. (The original is saved.) Cropped pictures cannot be cropped again on the camera. To return to picture-taking mode, press the Review button.

Reviewing and editing

Using KODAK PERFECT TOUCH Technology

KODAK PERFECT TOUCH Technology helps ensure better, brighter pictures.

1 Press the Review button, then for previous/next picture.

2Press the Menu button, then to highlight the Edit tab. Highlight PERFECT TOUCH Tech, then press OK.

The enhancement is previewed. Press to view other parts of the picture.

3 Choose Continue or Cancel.

4Press OK. Follow the screen prompts to replace the original picture or to save the enhanced picture as a new one.

??? Press the Review button to return to Picture-taking mode.

NOTE: You cannot apply PERFECT TOUCH Technology to videos or to pictures to which PERFECT TOUCH Technology is already applied.

Adding a date stamp

You can add a stamp???showing the date/time that it was taken???to a picture.

1 Press the Review button, then to find a picture.

2Press the Menu button, then to choose the Edit tab. Choose Date Stamp, then press OK.

The date/time is added to the picture.

??? Press the Review button to return to Picture-taking mode.

6 Doing more with your camera

Using the menu button to change settings in picture taking mode

You can change settings to get the best results from your camera.

NOTE: Some modes offer limited settings. Some settings remain until you change them; others, until you change modes or turn off the camera.

1 Press the Menu button.

2Press to choose a tab:

???Capture for the most common picture-taking settings

???Setup for other camera settings

3 Press to choose a setting, then press OK.

4 Choose an option, then press OK.

Using the Capture tab

Doing more with your camera

Video settings

Doing more with your camera

Using the Setup menu

Use Setup to customize other camera settings.

7 Transferring, printing pictures

When you transfer pictures/videos to your computer, any that you tagged for emailing or sharing on social networking sites are emailed or shared.

You can transfer in 2 ways:

???Using the included USB cable (see below)

???Using an optional EYE-FI Card (see page 43)

IMPORTANT: To enable the camera Share button for email and social network sharing, you must install and set up the KODAK Share Button App (see page 7).

1 Turn off the camera.

2 Using the USB cable, connect the camera to a computer

USB port. (Use only the cable included with this camera.) The camera turns on.

3 Follow the computer prompts to transfer pictures/videos to your computer.

NOTE: You can also use a card reader to transfer pictures/videos.

Transferring, printing pictures

Printing pictures

Direct printing with a KODAK All-in-One Printer

Your camera is compatible with PICTBRIDGE Technology, so you can print directly to PICTBRIDGE enabled Printers. You need a camera, a PICTBRIDGE enabled Printer, and a USB cable. Your camera must be set to Other Applications mode.

Connecting the camera to a KODAK All-in-One Printer

1 Turn off the camera and printer.

2 Connect the USB cable from the camera to the printer.

Printing from a KODAK All-in-One Printer

1Turn on the printer. Turn on the camera.

The PictBridge logo appears, followed by the current picture and menu. (If no pictures are found, a message appears.) If the menu turns off, press any button to restore it.

2Choose a printing option, then press OK.

Current Picture???Press to choose a picture.

Tagged Pictures???If your printer is capable, print pictures that you marked for printing.

Index Print???Print thumbnails of all pictures. (This option requires one or more sheets of paper.)

All Pictures???Print all pictures in internal memory or on a card.

NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer pictures to your computer, see page 38.

Purchase cables, accessories www.kodak.com/go/accessories

Disconnecting the camera from a KODAK All-in-One Printer

1 Turn off the camera and printer.

2 Disconnect the USB cable from the camera and the printer.

Transferring, printing pictures

Ordering prints online

KODAK Gallery (www.kodakgallery.com) makes it easy to:

???Upload your pictures.

???Edit, enhance, and add borders to your pictures.

???Store pictures, and share them with family and friends.

???Have prints, photo greeting cards, frames, and albums delivered to your door.

Printing from an SD or SDHC Card

???Automatically print tagged pictures when you insert your card into a printer with an SD/SDHC Card slot. See your printer user guide for details.

???Make prints at an SD/SDHC Card-capable KODAK Picture Kiosk. Go to www.kodak.com/go/picturemaker.

???Take the card to your local photo retailer for professional printing.

Marking your pictures for print

1 Press the Review button. Press to find a picture.

2 Press the Menu button.

3 Press to choose Print, then press OK.

4 Press to choose the number of copies.

Optional: You can apply a print quantity to other pictures. Press for previous/next. Repeat this step until the desired print quantity is applied to each picture.

5Press OK.

To return to picture-taking mode, press the Review button.

Using an EYE-FI Card

Sharing pictures using an EYE-FI Card

NOTE: You can share 1 picture/video at a time, and you cannot email pictures/videos.

1 Press the Share button.

2 Press to find a picture or video.

3Tap desired sharing destinations. (Tap again to remove a check mark. Tap the More icon to see additional sharing destinations.)

4 When finished, Tap Done.

IMPORTANT: For the best reception when transferring pictures to a computer or mobile device, the rear of the camera should face the Wi-Fi access point.

5When you???re in range of your Wi-Fi network, turn on the camera.

The picture/video is sent to the sharing destinations you chose.

Using an EYE-FI Card

Transferring pictures using an EYE-FI Card

You can transfer pictures from your camera to a computer or to a mobile device that???s running the EYE-FI App.

CAUTION:

If you???re using an EYE-FI Card in this camera, it???s critical that you disable (don???t turn on) Endless Memory Mode in EYE-FI Center Software.

1 On your computer, launch the EYE-FI application.

2 In picture-taking mode, press Menu.

3 Press to select EYE-FI, then press OK.

4We recommend the Selective Share setting:

Auto???All pictures are automatically sent to your computer. All pictures are shared to your social networking sites.

Selective Share???All pictures are automatically sent to your computer. Only pictures that you tagged to share are sent to your social networking sites.

Selective Transfer???Only pictures that you choose are sent to your computer. Only pictures that you tagged to share are sent to your social networking sites.

(See more about tagging pictures on page 20.)

5When you???re in range of your known Wi-Fi network, turn on the camera to transfer pictures to your computer or mobile device.

Icon Meaning

EYE-FI is idle, waiting to be in range of a Wi-Fi zone.

EYE-FI is on the network and transferring pictures to computer.

Error

EYE-FI is off.

Using an EYE-FI Card

Other EYE-FI Information

???It???s critical that you disable (do not turn on) Endless Memory Mode in EYE-FI Center Software.

???As of December 2010, EYE-FI Cards are permitted only in the countries and regions in which they were purchased. You may be held liable due to local restrictions.

???The EYE-FI Card has a wireless LAN function. Do not insert the EYE-FI Card where wireless LAN is prohibited, such as while aboard an airplane or in a hospital.

???Even when you set EYE-FI to off, the card may transmit radio waves.

???The card may become warm during use. This is normal.

???Battery life is reduced when using an EYE-FI Card.

???For the best reception when transferring pictures to a computer or mobile device, the rear of the camera should face the Wi-Fi access point.

Troubleshooting

10 Appendix

Camera specifications

CCD???1/2.3-type

Effective pixels???14 MP (4352 x 3264)

LCD???2.4 in. (6.1 cm) LCD; 112 pixels; 4:3 aspect ratio

Image storage???Optional Class 4 or higher SD/SDHC Card (or EYE-FI X2 Card or higher with a firmware version of 4.5174 or higher.) The SD logo is a trademark of the SD Card Association. Maximum supported card size: 32 GB

Taking lens???f/4.5; 35 mm equivalent: 35 mm

Lens protection???Built-in

Digital zoom???5X continuous

Shutter speed???1/8???1/1400 seconds

Long time exposure???0.5???8 seconds

ISO speed???Auto: 80???360; Manual: 80, 100, 200, 400, 800, 1250

Exposure compensation???+/-2.0 EV with 1/3 EV step

White Balance???Auto, Daylight, Tungsten, Fluorescent, Open Shade

Electronic Flash???Auto flash; Auto, Fill, Red Eye, Off; TBD: Guide No.6.5 (m)

working range @ ISO 360: 0.3 -2.45m

Self-timer mode???10 seconds, 2 seconds, 2 picture timer

Capture modes???Auto, Scene modes, Video, Underwater still, Underwater video

Image file format???

Still: EXIF 2.3 (JPEG compression); file organization DCF

Video: AVI (CODEC Motion JPEG; audio: -Law)

Appendix

Picture size???

14 MP (4:3) 4288 x 3216 pixels

12 MP (3:2) 4288 x 2848 pixels

10 MP (16:9) 4288 x 2416 pixels

6 MP (4:3) 2880 x 2160 pixels

3 MP (4:3) 2048 x 1536 pixels

Color modes???Vivid, Full, Basic, Black & White, Sepia

Sharpness modes???Sharp, Normal

Video capture???4 GB maximum; VGA (640 x 480 @ 30 fps)

Communication with computer???USB 2.0 high speed -> full speed (PIMA 15740 protocol); via KODAK Camera USB Cable, Micro B / 5-Pin

Video output???NTSC or PAL

Microphone???Yes

Speaker???No

Beeper???Yes

PICTBRIDGE support???Yes

Power???KODAK MAX Alkaline Batteries AA; KODAK Ni-MH Rechargeable Digital Camera Batteries AA, Lithium batteries AA

Tripod mount???1/4 inch

Size???92.2 x 66.6 x 29.4 mm (3.6 x 2.6 x 1.1 in.) @ power off

Weight???175 g (6.1 oz) with batteries and card

Operating temperature???0???40?? C (32???104?? F)

Waterproof capability???Conforms to IEC60529 IPX8, up to 5meters (16 ft)

Dust proof capability???Conforms to IEC60529 IP6X

Appendix

Care and maintenance

???If you suspect water has gotten inside the camera, remove the batteries and card. Allow all components to air-dry for at least 24 hours before using the camera.

???Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.

???Service agreements may be available in your country. Contact a dealer of KODAK Products for more information.

???For digital camera disposal or recycling information, contact your local authorities. In the US, go to the Electronics Industry Alliance site at www.eiae.org or Kodak at www.kodak.com/go/c135support.

???In water, do not use below a depth of 5 meters (16 ft).

???Do not open/close camera doors in water.

???The camera does not float. To prevent it from sinking, secure it to your wrist with the wrist strap (provided). You can also purchase a floating wrist strap at www.kodak.com/go/accessories. Tightly close and latch all doors to keep the camera waterproof. Do not open doors in water or when hands are wet.

Waterproof integrity may be compromised if the camera is dropped.

???If water has entered the camera, remove the card. Allow all components to air-dry for at least 24 hours before using the camera.

???If the camera was used in chemically treated water or saltwater, rinse it in fresh water, then use a soft towel to dry it.

???Wipe off dirt or sand from the door seals???debris could compromise the seal and cause a leak when in water.

Appendix

Upgrading your software and firmware

Download the latest versions of KODAK Software and the camera firmware (the software that runs on the camera). Go to www.kodak.com/go/c135downloads.

Storage capacities

The LCD displays the approximate number of pictures (or minutes/seconds of video) remaining. For average SD Card capacities, go to www.kodak.com/go/SDcapacities. Actual storage capacity varies depending on subject composition, card size, and other factors. You may be able to store more or fewer pictures and videos.

Important safety instructions

CAUTION:

Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. KODAK AC Adapters and Battery Chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.

???The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, go to www.kodak/go/accessories.

???Use only a USB-certified computer equipped with a current-limiting motherboard. Contact your computer manufacturer if you have questions.

???If using this product in an airplane, observe all instructions of the airline.

???When removing the batteries, allow them to cool; they may be hot.

???Follow all warnings and instructions supplied by the battery manufacturer.

???Use only batteries approved for this product to avoid risk of explosion.

???Keep batteries out of the reach of children.

Appendix

???Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak.

???Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.

???Remove the batteries when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support.

???In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak customer support.

???Go to www.kodak.com/go/reach for information about the presence of substances included on the candidate list according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).

???Dispose of batteries according to local and national regulations. Go to www.kodak.com/go/kes.

???Do not charge non-rechargeable batteries.

For more information on batteries, go to www.kodak.com/go/batterychart.

Battery replacement, battery life

Lithium batteries AA, KODAK MAX Alkaline Batteries AA: 200 pictures. Battery life per CIPA testing method. (Approx. number of pictures in Auto mode, using an SD Card.) Actual life may vary based on usage. For other compatible batteries, see the Power section in Camera specifications, page 50.

Extending battery life

???Charge Ni-MH batteries when they are nearly depleted.

???Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean, dry cloth before loading batteries in the camera.

???Battery performance is reduced at temperatures below 41?? F (5?? C). When using

Appendix

your camera in cold weather, carry spare batteries and keep them warm. Do not discard cold batteries that do not work; when they return to room temperature, they may be usable.

Limited warranty

Kodak warrants its digital cameras and accessories (excluding batteries) to be free from malfunctions and defects in both materials and workmanship for the warranty period specified on your KODAK Product packaging. Retain the original dated sales receipt. Proof of purchase date is required with any request for warranty repair.

Limited warranty coverage

Warranty service is only available from within the country where the Products were originally purchased. You may be required to ship Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under the warranty. If replacement parts are used in making repairs, those parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodak's control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments, failure to follow Kodak's operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or

Appendix

claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be the length of the express warranty period specified on your Kodak product packaging. The option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase, use, or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.

Your rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.

Outside the United States and Canada

In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.

Regulatory compliance

FCC compliance and advisory

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

Appendix

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user???s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.

Waste Electrical and Electronic Equipment/Battery disposal

In Europe: For human/environmental protection, it is your responsibility to dispose of this equipment and batteries at a collection facility established for this purpose (separate from municipal waste.) For more information, contact your retailer, collection facility, or appropriate local authorities; or go to www.kodak.com/go/recycle. Product weight: 174 g (6.1 oz) with batteries and card.

Canadian DOC statement

DOC Class B Compliance???This Class B digital apparatus complies with Canadian ICES-003.

Observation des normes-Classe B???Cet appareil num??rique de la classe B est conforme ?? la norme NMB-003 du Canada.

Appendix

CE

Hereby, Eastman Kodak Company declares that this KODAK Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Australian C-Tick

N137

Korean Class B ITE

Russian GOST-R

Eastman Kodak Company

Rochester, NY 14650

Appendix

China RoHS

Index

Index

Index

transfer to computer, 38 viewing, 22

video out, 36 viewing

by multi-up, 24

picture, after taking, 11, 22

W warranty, 55 water, 18

white balance, 35 wireless EYE-FI card, 41

Z

zoom, 13