Kodak_All_in_One_Printer_ESP

KODAK ESP C315 All-in-One Printer

Home Center Software

KODAK Home Center Software is installed with your KODAK All-in-One Printer Software, unless you choose otherwise. The Home Center icon will appear on your desktop.

On a computer with WINDOWS Operating System (OS), you can use Home Center Software to:

???browse, crop, enhance, and edit pictures

???print and scan

???configure your printer

???upgrade to the latest printer software and firmware

???order supplies

???access the KODAK Tips and Projects Center

???access this Extended User Guide

On a computer with MAC OS, you can use Home Center Software to:

???scan

???configure your printer

???upgrade to the latest printer software and firmware

???order supplies

???access this Extended User Guide

Ordering supplies

You can order ink cartridges, paper, and accessories online.

To order supplies, make sure that your computer is connected to the Internet, then:

1.Open Home Center Software.

2.Select Order Supplies (on a computer with WINDOWS OS) or select the Tools tab, then click Order Supplies (on a computer with MAC OS).

3.Select the item(s) you want to buy, then follow the on-screen instructions.

Printer Overview

Configuring printer settings

To set or change basic printer settings:

1.Press Home.

2.Press to select Printer Settings, then press OK.

3.Press to select one of the following settings:

???Date and Time

???Press OK, then press to select Year, Month, Day, Hour, or Minute.

???Press or to change the values; press OK when you are done making changes.

???Press Back to go back to the Printer Settings menu.

???Time to Low Power

To conserve energy, your printer will enter a low power (sleep) mode after being idle for a default delay time of 1 hour. You can increase the delay time to low power (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.

???Press to change the time to energy-saving sleep mode (select from 1 to 4 hours in 0.5 hour increments).

???Tagged Images Printing (see Printing tagged pictures, page 28)

???Press to select Off or On.

???Language

???Press OK, press to select a language, then press OK.

???Country/Region

???Press OK, press to select a country or region, then press OK.

???Reset All Settings (see Resetting factory defaults, page 57)

NOTE: Resetting factory defaults does not change the date and time, language, country/region, or network settings.

???Printer Info

???Press OK to view the Firmware Version number; press OK when you are done.

4.Press Back to return to the Main Menu.

KODAK ESP C315 All-in-One Printer

Setting your printer as the default printer

If you have more than one printer and your all-in-one printer is not the default printer, you may set it as your default printer.

IMPORTANT: For all operating systems, if you connect your printer with a USB cable and with a wireless connection, your printer may be listed twice. Be sure to select the correct printer. The name of the printer that ends with a plus and four digits (+XXXX) indicates a wireless connection.

For computers with WINDOWS XP OS

1.Select Start > Control Panel > Printers and Faxes or Start > Settings > Control Panel > Printers and Faxes.

2.Right-click your printer, and select Set as Default Printer.

For computers with WINDOWS VISTA OS

1.Select Start > Control Panel > Hardware and Sound > Printers.

2.Right-click your printer, and select Set as Default Printer.

For computers with WINDOWS 7 OS

1.Select Start > Control Panel > Hardware and Sound > Devices and Printers.

2.Right-click your printer, and select Set as Default Printer.

For computers with MAC OS

When a new printer is installed, it becomes the default printer. If your all-in-one printer is not the default printer:

1.From the dock, open System Preferences.

2.In the Hardware section, click Print & Fax.

3.Select your printer from the drop-down list next to Default Printer.

2Networking Your Printer

This section explains how to configure your wireless network settings.

Connecting to a wireless network

To connect your printer to an 802.11b/g/n wireless (Wi-Fi) network, refer to the following information.

Before you connect

You need:

???a wireless router.

???to determine whether your wireless router supports Wi-Fi Protected Setup (WPS).

NOTE: If you have specific questions about your router, see your router manufacturer???s documentation for more information.

For information, go to www.kodak.com/go/inkjetnetworking.

Connecting to a wireless network using the Wi-Fi Setup Wizard

You can use the Wi-Fi Setup Wizard on the printer to connect to your wireless network. Read the following procedures and use the one that is appropriate for your network setup.

Connecting to a non-WPS wireless router

To connect your printer to your wireless network, you need to know the network name, also called the Service Set Identifier (SSID). You can obtain your network name from the wireless router.

If your network has security enabled, you also need to know the Security String (passphrase or password).

Record your network information in the spaces below, using the correct uppercase and lowercase letters.

Network Name (SSID): _______________________________________

Security String (case-sensitive): ________________________________

1.Press Home.

2.Press to select Network Settings, then press OK.

3.With Wi-Fi Setup Wizard selected, press OK.

NOTE: The Wi-Fi radio turns on when you select Wi-Fi Setup Wizard.

KODAK ESP C315 All-in-One Printer

The Wi-Fi connectivity LED blinks as the printer searches for available wireless networks within range, then displays the list in order of signal strength. For example:

If there are more networks than can be shown on the LCD, a (page down) symbol appears in the bottom right of the display.

4.Press to select your network, then press OK.

If you don???t see your network in the list, or if you want to change your network, select Rescan for Wireless Networks, then press OK.

NOTE: If the name of your network is not listed, make sure your wireless router is turned on and within range. If the name of your network is still not listed, go to www.kodak.com/go/inkjetnetworking for more information.

5.If your network requires a password, use the LCD keyboard to enter your Security String.

On the control panel, press , , or to select the letters and numbers, using the correct uppercase and lowercase letters.

Press OK after each character. When you are finished, select DONE, then press OK

6. When the confirmation message appears, press OK.

Networking Your Printer

When the printer is successfully connected, the Wi-Fi connectivity LED will stop blinking and stay on steadily.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESPC315+0034).

NOTE: If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking for more information.

7.If you haven???t yet installed the KODAK All-in-One Printer Software:

a.Go to www.kodak.com/go/aiodownloads.

b.In the results list, click the link for KODAK All-in-One Printer Software for either WINDOWS or MACINTOSH Operating System, depending on your computer???s operating system.

c.Follow the on-screen instructions to install the software.

Connecting to a WPS wireless router

If your router supports Wi-Fi Protected Setup (WPS), you can use WPS Connect. WPS lets you configure your printer for a wireless network by pressing buttons or entering a PIN.

To connect to a network using WPS:

1.Press Home.

2.Press to select Network Settings, then press OK.

3.With Wi-Fi Setup Wizard selected, press OK.

NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard.

4.With WPS Connect selected, press OK.

KODAK ESP C315 All-in-One Printer

5.Select one of two methods of connecting:

IMPORTANT: Before you press OK on the printer, make sure you know where the router's push button is, or where to enter the generated PIN. If necessary, consult your Internet service provider or router device manufacturer???s documentation for more information.

6. When the confirmation message appears, press OK.

When the printer is successfully connected, the Wi-Fi connectivity LED stops blinking and stays on steadily.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESPC315+0034).

NOTE: If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking for more information.

7.If you haven???t yet installed the KODAK All-in-One Printer Software:

a.Go to www.kodak.com/go/aiodownloads.

b.In the results list, click the link for KODAK All-in-One Printer Software for either WINDOWS or MACINTOSH Operating System, depending on your computer???s operating system.

c.Follow the on-screen instructions to install the software.

Networking Your Printer

Setting up an IP address

IMPORTANT: You should only need to set up an IP address for your printer if you are having a problem with connecting. Typically, it is not necessary to set up an IP address. This procedure is for advanced users who know how to obtain the IP address for the printer.

All IP address entries have the following format: 000.000.000.000. Within each three-digit grouping, the number must be right-justified. If an address or subnet mask has only one or two characters between the periods, include one or two leading zeros in front of that number. For example:

The address as it may appear in your documentation

How to enter the address in the printer menu

For information about obtaining the printer IP address, go to

www.kodak.com/go/inkjetnetworking.

To set up your IP address on the printer:

1.Press Home.

2.Press to select Network Settings, then press OK.

3.Press to select Advanced IP Address Setup, then press OK.

4.Press OK again to continue.

5.Select one of the following, then press OK:

???Dynamic (DHCP)

???Manual (Static)

6.If you selected Manual (Static), you are prompted to enter an IP address, a Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after each entry. Use the navigation buttons to enter each digit of the numbers.

Consult your Internet service provider or network administrator for more information.

KODAK ESP C315 All-in-One Printer

Viewing the network configuration

To view the network configuration and verify that you are connected to your wireless network:

1.Press Home.

2.Press to select Network Settings, then press OK.

3.Press to select View Network Configuration, then press OK.

The wireless or Ethernet network settings appear on the LCD, including:

???Printer Hostname

???Connection

???Speed

???IP Address

???IP Address Type

???Network Subnet

???Connected Network SSID

???Security

???Authentication

???Channel

???Region

???Radio (on/off)

???MAC Address

If the printer is connected to your network, you will see the network name and the word CONNECTED.

4.To scroll through the information, press .

5.When you are done, press OK.

Printing the network configuration

To print the current network configuration:

1.Load plain paper into the printer. (See Loading plain paper, page 17.)

2.Press Home.

3.Press to select Network Settings, then press OK.

4.Press to select Print Network Configuration, then press OK.

Networking Your Printer

Installing your printer on additional computers on the network

To add your printer to another computer(s) on your network, install the KODAK

All-in-One Printer Software on each computer.

1.Go to www.kodak.com/go/aiodownloads.

2.In the results list, click the link for KODAK All-in-One Printer Software for either WINDOWS or MACINTOSH Operating System, depending on your computer???s operating system.

3.Follow the on-screen instructions to install the software.

Connecting to another KODAK All-in-One Printer

If you are connecting to a newer model printer (for example, you have an ESP 7 printer and now you are adding an ESP C315 printer), you must install the software for the newer model.

NOTE: When you install the new software, the printer driver for the ESP 7 printer will be uninstalled, and an upgraded driver for the ESP 7 printer will be installed in addition to the driver for the ESP C315 printer.

On a computer with WINDOWS OS:

1.Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.

???If your wireless all-in-one printer (example: KodakESPC315+0034) is not listed:

a.Select No, my printer is not listed, then click Next.

b.From the drop-down list, select your printer.

c.Select Network - Wireless/Wi-Fi, then click Next. When your printer is detected, driver installation begins.

???If your wireless all-in-one printer (example: KodakESPC315+0034) is listed:

a.Highlight the all-in-one printer that is connected to your network.

b.Select Yes, my printer is listed, then click Next.

When your printer is detected, driver installation begins.

2.When driver installation is complete, click Done.

On a computer with MAC OS:

1.Select Apple > System Preferences.

2.Under Hardware, select Print & Fax.

3.In the Print & Fax dialog box, click +.

4.Select your printer from the list, then click Add.

KODAK ESP C315 All-in-One Printer

Adding a wireless network connection to a USB-connected computer

You can change the way you connect to your printer at any time.

Changing from USB to a wireless connection

To change the printer connection type from USB to a wireless (Wi-Fi) network:

If your printer is connected to a computer with WINDOWS OS:

1.Unplug the USB cable from your printer and computer.

2.On the printer control panel, press Home.

3.Press to select Network Settings, then press OK.

4.Press to select View Network Configuration, press OK, then confirm that the IP Address is not 0.0.0.0.

5.If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, page 6.

6.Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.

???If your wireless all-in-one printer (example: KodakESPC315+0034) is not listed:

a.Select No, my printer is not listed, then click Next.

b.Select your printer from the list.

c.Select Network - Wireless/Wi-Fi, then click Next. When your printer is detected, driver installation begins.

???If your wireless all-in-one printer (example: KodakESPC315+0034) is listed:

a.Highlight the all-in-one printer that is connected to your network.

b.Select Yes, my printer is listed, then click Next.

When your printer is detected, driver installation begins.

7.When driver installation is complete, click Done.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESPC315+0034).

Networking Your Printer

If your printer is connected to a computer with MAC OS:

1.Unplug the USB cable from your printer and computer.

2.On the printer control panel, press Home.

3.Press to select Network Settings, then press OK.

4.Press to select View Network Configuration, press OK, then confirm that the IP Address is not 0.0.0.0.

5.Select Apple > System Preferences.

6.Under Hardware, select Print & Fax.

7.In the Print & Fax dialog box, click +.

8.Select your printer from the list, then click Add.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESPC315+0034).

3Handling Paper

For the best document printing results, use KODAK Document Papers or a paper with the COLORLOK Technology logo on the package. Use only paper that is designed for inkjet printers.

For the best photo printing results, use KODAK Photo Papers, which are optimized to work with KODAK All-in-One Printers, or photo papers designed for use on pigment-based inkjet printers.

When handling photo paper:

???Hold the paper by the edges; avoid placing your fingerprints on it.

???Do not touch the glossy side of photo paper.

???Store paper flat, away from direct sunlight and heat.

Paper types

You can use:

???Plain paper ??? 16 to 24 lb / 60 to 90 gsm

???Photo paper ??? up to 12 mils

???Card stock ??? 110 lb / 200 gsm, max

???Envelopes ??? most standard types

???Labels ??? all commercially available inkjet varieties on 8.5 x 11-in. or A4 sheets

???Iron-on transfers ??? all commercially available inkjet varieties on 8.5 x 11-in. or A4 sheets

Paper sizes

The printer accepts the following paper sizes:

???4 x 6 in. / 10 x 15 cm

???4 x 7 in. / 10 x 18 cm

???4 x 8 in. / 10 x 20 cm

???4 x 12 in. / 10 x 31 cm

???5 x 7 in. / 13 x 18 cm

???7.3 x 8.5 in. / 18 x 22 cm

???7.3 x 10.5 in. / 18 x 27 cm

???8 x 10 in. / 20 x 25 cm

???8.5 x 11 in. / 22 x 28 cm

???8.5 x 14 in. / 22 x 36 cm

???A4 (8.3 x 11.7 in. / 21 x 30 cm)

???A5 (5.8 x 8.3 in. / 15 x 21 cm)

???A6 (4.1 x 5.8 in. / 11 x 15 cm)

???B5 (6.9 x 9.8 in. / 18 x 25 cm)

NOTE: Do not load paper smaller than 4 x 6 in. / 10 x 15 cm.

Handling Paper

Envelope sizes

The printer accepts the following envelope sizes:

???C5 (6.7 x 9 in. / 16 x 23 cm)

???C6 (4.5 x 6.4 in. / 11 x 16 cm)

???DL (4.3 x 8.7 in. / 11 x 22 cm)

???US #7?? (3.9 x 7.5 in. / 10 x 19 cm)

???US #9 (3.9 x 8.9 in. / 10 x 23 cm)

???US #10 (4.1 x 9.5 in. / 11 x 24 cm)

IMPORTANT: Do not load envelopes with cutout or clear windows.

Loading paper

To load paper:

1. Lift the input tray.

2. Open the output tray, then pull out the extender until it is fully extended.

Handling Paper

Loading photo paper

The input tray capacity is 20 sheets of photo paper.

To load photo paper:

1.Remove any paper from the input tray.

2.Insert the paper (short side first) into the center of the input tray with the logo side toward the tray and the glossy side toward you.

IMPORTANT: Always load the paper short side first. The printer automatically detects the orientation of the picture, whether it???s portrait or landscape, and prints accordingly. If the photo paper is loaded in the wrong direction, the image will be cut off and the paper may jam. If the paper is loaded with the wrong side up, the image quality will be affected.

3. Move the paper-edge guides until they touch the paper.

4Printing

Print documents and lab-quality pictures on your printer.

Printing documents

To print a document:

1.Open the document on your computer.

2.Select File > Print.

3.In the Print dialog box, select your KODAK Printer.

4.Choose the pages to print, number of copies, etc, then click OK (on a computer with WINDOWS OS) or Print (on a computer with MAC OS).

Printing two-sided documents

You can print two-sided documents on any size paper that the printer accepts (see Paper sizes, page 15) by rotating the paper manually as described below.

IMPORTANT: Two-sided printing can only be done on media that can absorb ink on both sides, such as plain paper or two-sided photo paper. Two-sided printing will not work on bar-coded photo paper (the bar code is on the back side).

Printing two-sided documents from a computer with WINDOWS OS

To print two-sided documents from a computer with WINDOWS OS:

1.Load paper into the paper input tray.

2.Open the document you want to print, then select File > Print.

3.In the Print dialog box, make sure that KODAK ESP C315 Series AiO (or for a wireless connection, KodakESPC315+XXXX, where XXXX is a number) is selected, then click Properties.

4.Select the Layout tab.

5.In the Two-sided printing field, select Manual (Instructions provided), then click OK.

6.Click OK.

7.When a message appears on your computer or printer LCD, remove the printed pages from the output tray, and follow the instructions on the computer or LCD.

8.Turn the printed pages over, and place into the input tray (top edge down and printed side away from you).

9.Press Start on the printer.

KODAK ESP C315 All-in-One Printer

Printing two-sided documents from a computer with MAC OS

To print two-sided documents from a computer with MAC OS:

1.Load paper into the paper tray.

2.Open the document you want to print, then select File > Print.

3.In the Print dialog box, make sure that Eastman Kodak Company KODAK ESP C315 AiO (or for a wireless connection, KodakESPC315+XXXX, where XXXX is a number) is selected.

4.In the Copies & Pages drop-down list, select Paper Handling.

5.In the Pages to Print drop-down list, select Odd Only.

6.In the Page Order drop-down list, select Normal.

7.Click Print.

8.When the odd pages have finished printing, remove them from the output tray.

9.Turn the printed pages over, and place into the input tray (top edge down and printed side away from you).

10.Select File > Print.

11.In the Copies & Pages drop-down list, select Paper Handling.

12.In the Pages to Print drop-down list, select Even Only.

13.In the Page Order drop-down list, select Normal.

14.Click Print.

Printing forms

You can print the following preprogrammed forms:

???Graph paper

???Wide ruled

???Narrow ruled

???Grocery list

???Reminder list

???Tic-tac-toe

???Sheet music (portrait)

???Sheet music (landscape)

To print a preprogrammed form:

1.Press Home.

2.Press to select Printable Forms, then press OK.

3.Press to select a form.

4.Press or to select a quantity, then press OK.

5.Press Start.

Printing

Printing pictures

You can print pictures with your all-in-one printer from:

???A memory card inserted into the memory card slot on the printer.

???Any picture-editing or photo-management software on your computer.

On a computer with WINDOWS OS, you can print pictures using Home Center Software, which lets you edit and enhance your pictures quickly. Open Home Center Software, select Print Pictures, then follow the on-screen instructions.

Printing from a memory card

The memory card slot on your printer accepts the following memory cards:

???SD Card

???SDHC Card

???MMC Card

???MEMORY STICK

???Variations of the memory cards listed above that require an adapter (for example, MEMORY STICK Duo, miniSD, and microSD)

IMPORTANT: If you use a memory card with an adapter, make sure you insert and remove the adapter and the memory card as a unit; do not remove the memory card while leaving the adapter in the printer.

memory card slot

KODAK ESP C315 All-in-One Printer

Viewing pictures on a memory card

When you insert a memory card into the memory card slot on your printer, the pictures on the card appear on the LCD. Press or to scroll through the pictures.

If the printer is idle for more than two minutes, the LCD will revert to the status display. To view the pictures again, press any button, then press or .

Finding pictures on a memory card

Your printer can help you locate pictures on a memory card by the date the picture was taken or last saved.

To locate pictures:

1.Insert the memory card into the memory card slot.

2.Press Home.

3.Press to select View / Print Photos, then press OK.

4.Press to select Find Photos, then press OK.

5.In the View by Date menu, press to select Year, Month, or Day; press or to select the specific year, month, or day.

The number of photos found for the date you specified appears under the menu name. To view these pictures, press OK.

6.To view these pictures, press OK.

Printing

Using default settings to print a picture

To print a picture from a memory card using the factory default settings:

1.Load photo paper (short side first) into the center of the input tray with the glossy side toward you (see Loading photo paper, page 18), and move the paper-edge guides until they touch the paper.

2. Insert the memory card into the memory card slot.

memory card slot

3.Press or to display the picture you want to print.

4.Press Start to begin printing.

The printer prints one 4 x 6 in. / 10 x 15 cm picture.

IMPORTANT: To prevent loss of data from your memory card, do not remove it from the printer while printing.

KODAK ESP C315 All-in-One Printer

Changing the settings and printing pictures

You can change the print photos options for an individual picture or group of pictures, or you can change the settings and save them as the default.

To print a picture or pictures using settings other than the default settings:

1.Load photo paper with the glossy side toward you (see Loading photo paper, page 18), and move the paper-edge guides until they touch the paper.

2.Insert the memory card into the memory card slot. A picture appears on the LCD.

memory card slot

3.Press or to select the picture you want to print, then press OK.

4.Repeat step 3 for each picture you want to print.

5.Press Back for Print Photos Options.

6.Press to select an option (see table below), then press or to change the setting.

KODAK ESP C315 All-in-One Printer

Printing panoramic pictures

To print a panoramic picture, load 4 x 12 in. / 10 x 31 cm paper, or US letter or A4 paper in the main paper tray.

1. Insert the memory card into the memory card slot.

memory card slot

2.Press or to select the panoramic picture you want to print, then press OK.

3.Press Back for Print Photos Options.

4.Press to select Print Size, then press to select 4 x 12.

5.Press Start.

IMPORTANT: To prevent loss of data from your memory card, do not remove it from the printer while printing.

Printing

Printing tagged pictures

Some digital cameras let you tag (or ???mark???) pictures on the memory card for printing. This creates a tag that is recognized by the printer. If you choose to print tagged pictures, they will be printed according to the default settings on your printer (unless otherwise specified by the tag from the camera).

NOTE: Refer to your camera user guide to determine whether your camera supports tagged (also ???marked??? or ???DPOF???) functionality.

To print tagged pictures:

1.Load photo paper with the glossy side toward you (see Loading photo paper, page 18), and move the paper-edge guides until they touch the paper.

2.Insert the memory card into the memory card slot.

memory card slot

3. When the ???Print tagged images???? message appears, press Start.

KODAK ESP C315 All-in-One Printer

Zooming and cropping pictures

Use the zoom buttons to select a portion of your picture for printing.

To zoom and crop a picture:

1. Insert the memory card into the memory card slot.

memory card slot

2.Press or to select the picture you want to crop, then press OK.

3.Press Zoom + to enlarge the picture on the LCD. A red box shows the area that will be printed.

NOTE: You can press Zoom + repeatedly to enlarge the picture in increments of 0.25 up to a magnification of 5X. Press Zoom ??? to decrease the magnification in increments of 0.25 down to 1X.

4. Press the Rotate button to rotate the crop box, if desired.

NOTE: The printer automatically detects the orientation of the picture, whether it???s portrait or landscape, and prints accordingly. Do not rotate the paper in the input tray; the paper should always be loaded short side first.

5.Use the navigation buttons , , , and to move the picture on the LCD up, down, left, or right. Only the part of the picture in the red box will print. The crop window matches the aspect ratio of the selected output print size.

NOTE: Zooming and cropping does not change the saved picture on the memory card.

6.When you are satisfied with the picture, press OK. The picture appears in the original view with a red box around the portion of the picture that will print.

7.Press Start to begin printing.

Printing

Transferring pictures to a computer

You can transfer your image files from a memory card in the printer to your computer. To transfer these files, the printer must be connected to your computer with a USB cable.

NOTE: If you have large video files or a large number of pictures (400 or more), we recommend that you transfer them using a memory card reader attached directly to your computer.

1.Insert the memory card into the memory card slot on the printer.

2.Press Back.

3.Press to select Transfer All to PC, then press OK.

4.Press Start.

5.Follow the on-screen instructions on your computer.

5Copying

You can copy documents and pictures with your all-in-one printer. The printer produces high???quality color or black-and-white copies on a variety of paper types (see Paper types, page 15).

Copying a document

You can copy a document using the default settings, or you can adjust the quantity, size, quality, and brightness of your copies.

Using the default settings to copy a document

The default settings are either the factory default settings (see Resetting factory defaults, page 57), or defaults that you have set on the printer (see Save as Defaults, page 33).

To copy a document using the current default settings:

1.Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.

2.Close the lid.

3.Press Home.

4.Press Start to begin copying.

Copying

2.Close the lid.

3.Press Home.

4.With Copy Document selected, press or to select a number.

5.Press Start to begin copying.

Enlarging or reducing a document

To enlarge or reduce the size of the copy:

1.Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.

2.Close the lid.

3.Press Home.

4.With Copy Document selected, press OK.

5.Press to select Copy Size.

6.Press or to select an enlargement or reduction.

7.Press Start to begin copying.

KODAK ESP C315 All-in-One Printer

Darkening or lightening a copy

To darken or lighten the copy:

1.Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.

2.Close the lid.

3.Press Home.

4.With Copy Document selected, press OK.

5.Press to select Brightness.

6.Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.

7.Press Start to begin copying.

Copying

Copying a photograph

You can copy a photograph using the default settings, or you can adjust the quantity, size, quality, and brightness of your copies.

Using the default settings to copy a photograph

The default settings are either the factory default settings (see Resetting factory defaults, page 57), or defaults that you have set on the printer (see Save as Defaults, page 38).

To copy a photograph using the current default settings:

1.Load photo paper into the printer (see Loading photo paper, page 18).

2.Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass.

3.Close the lid.

4.Press Home.

5.Press to select Copy Photo.

6.Press Start to begin copying.

Copying

Enlarging or reducing a photograph

To enlarge or reduce the size of the copy:

1.Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass.

2.Close the lid.

3.Press Home.

4.Press to select Copy Photo, then press OK.

5.Press to select Copy Size.

NOTE: Make sure that the paper loaded in the input tray is at least as wide as the Copy Size selected or you will get a wrong paper size error. Also, if the loaded paper is not as long as the Copy Size selected, the output picture will be cut off without any warning.

6.Press or to select the copy size.

7.Press Start to begin copying.

KODAK ESP C315 All-in-One Printer

Darkening or lightening a photograph

To darken or lighten the copy:

1.Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass.

2.Close the lid.

3.Press Home.

4.Press to select Copy Photo, then press OK.

5.Press to select Brightness.

6.Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.

7.Press Start to begin copying.

6Scanning

Scanning digitizes documents and pictures, and sends the digital files to your computer.

When you scan, the digital file can:

???Open in Home Center Software (when Home Center Software is loaded and the printer is connected to a computer with WINDOWS OS)

???Open in a third-party scanner software

???Be saved in a format and location that you determine (see Changing the scan settings for scanning from the printer control panel, page 42)

There are two ways to scan: From the control panel on the printer, or from a software program on the computer. Scanning from a software program on the computer (such as Home Center Software) is recommended because it gives you more options.

Before you begin scanning

Make sure that the printer is connected to a computer using a USB cable or wireless network (see Chapter 2 , Networking Your Printer). If you plan to scan directly from the printer control panel, you may change the scan settings as described below.

Changing the scan settings for scanning from the printer control panel

Adjust the scan settings that the printer uses before you scan from the printer control panel.

1.Open the Printer Tools window.

???On a computer with WINDOWS OS, select Start > All Programs > Kodak >

Kodak AiO Printer Tools.

???On a computer with MAC OS, open Home Center Software, then select the

Tools tab.

2.Under the Tools heading, select Printer Scan Settings.

3.Adjust settings for scanning documents and pictures:

a. To select a program that scanned images or documents will appear in when you scan from the printer control panel:

(1)Select the General tab.

(2)Under the Program List heading, click next to the currently selected program.

(3)From the drop-down list, select the program in which you want the scanned files to open.

KODAK ESP C315 All-in-One Printer

Scanning from the computer

To scan a document or a picture on a computer:

1.Lift the scanner lid, and place the document or picture face down on the glass.

2.Close the scanner lid.

3.Open Home Center Software.

???On a computer with WINDOWS OS, double-click Scan Documents and Pictures, then follow the on-screen instructions.

???On a computer with MAC OS and Home Center Software, select the Tools tab, click Scan Application, then follow the on-screen instructions.

NOTE: If you are not using Home Center Software, open a program that allows you to scan, then follow the instructions.

Scanning multiple pictures simultaneously

Using Home Center Software, you can scan multiple pictures simultaneously and save them as separate files.

When scanning multiple pictures, leave space between the pictures so that the printer can detect the separate pictures. Any pictures that overlap are interpreted as a single picture.

Scanning multiple pictures when connected to a computer with WINDOWS OS

To scan multiple pictures simultaneously, and save them as separate files:

1.Lift the scanner lid, and place the pictures face down on the glass, leaving space between the pictures.

2.Close the lid.

3.Open Home Center Software, then double-click Scan Documents and Pictures.

4.Make sure that Picture is selected and Collage - Combine all pictures is cleared, then follow the on-screen instructions.

NOTE: Click the Help icon for additional instructions.

Scanning

Scanning multiple pictures when connected to a computer with MAC OS

To scan multiple pictures simultaneously, and save them as separate files:

1.Lift the scanner lid, and place the pictures face down on the glass, leaving space between the pictures.

2.Close the lid.

3.Open Home Center Software, then select your printer.

4.Select the Tools tab.

5.Click Scan Application.

6.Select Color Picture or Black and White Picture.

7.Select Automatically detect multiple pictures, if it is not selected.

8.Click Preview or Scan All, then follow the on-screen instructions.

NOTE: Click the Help icon for additional instructions.

7Maintaining Your Printer

Your printer requires little maintenance. However, Kodak recommends cleaning the scanner glass and lid regularly to remove dust and fingerprints, which affect the quality and accuracy of scanning.

Except while cleaning the printer, keep the printer plugged into an AC power outlet. If you use a power strip, don't turn off the power strip. (The printer does not need to be turned on but should be plugged in.)

For optimal performance, keep the printer connected to a computer that is powered on and has the KODAK Home Center Software installed, or keep the printer powered on and connected to the Internet through a wireless network.

Keep the printhead and ink cartridges in the printer at all times to help prevent damage to the printhead.

For recycling and/or disposal information, contact your local authorities. In the US, go to the Electronics Industry Alliance at www.eia.org or go to www.kodak.com/go/recycle.

General care and cleaning

CAUTION:

Always disconnect the power to the printer before cleaning it. Do not use harsh or abrasive cleaners on any part of the printer.

???To clean the printer, wipe the outside with a clean, dry cloth.

???Keep the surrounding area vacuumed and litter-free.

???Protect the printer from tobacco smoke, dust, and liquid spills.

???Do not place objects on the printer.

???Keep the input tray free of dust, dirt, and other foreign objects.

???Keep the printer supplies away from direct sunlight and out of high-temperature environments.

???Do not allow chemicals to come into contact with the printer.

Maintaining Your Printer

Cleaning the scanner glass and document backing

The scanner glass can get smudged and minor debris can accumulate on the white document backing under the scanner lid. Periodically clean the scanner glass and document backing.

CAUTION:

Do not use harsh or abrasive cleaners on any part of the printer. Do not spray liquid directly on the glass.

Do not use paper-based wipes on the document backing as they can scratch it.

To clean the scanner glass and document backing under the scanner lid:

1.Turn off the printer and unplug it from the power outlet.

2.Lift the scanner lid.

3.Wipe the glass with a soft cloth or sponge, slightly moistened with a nonabrasive glass cleaner.

Maintaining Your Printer

Replacing ink cartridges

Your printer uses both black and color ink cartridges. You can check the approximate ink levels on the LCD (see Checking ink levels, page 57). When an ink cartridge is out of ink, the printer LCD displays a message stating that the black or color ink cartridge needs replacing. You can order ink cartridges online. Open Home Center Software and select Order Supplies.

IMPORTANT: Do not use non-Kodak brand or refilled ink cartridges.

To replace an ink cartridge:

1.Make sure your printer is on.

2.Lift the printer access door, and wait for the carriage to move to a position where you can access it.

The ink cartridges are located in the printhead.

Printhead

Black

ink cartridge

Color ink cartridge

KODAK ESP C315 All-in-One Printer

Updating the software and printer firmware

Using the latest software and firmware helps ensure optimal performance of your printer.

NOTE: Firmware is the software that runs on your printer.

Although there is a background check for software and firmware updates, you may update manually using the following procedure.

Updating manually if your printer is connected to a computer with WINDOWS OS

To update the software:

1.Make sure that your computer is connected to the Internet.

2.Select Start > All Programs > Kodak > Kodak AiO Printer Tools.

3.Under Printer Resources, click Check for Software Updates to check whether software updates are available.

4.If there are updates, click Next and follow the on-screen instructions.

To update the firmware:

1.Make sure that your computer is connected to the Internet.

2.Connect the printer to the computer with a USB cable or wirelessly (if not currently connected).

3.Select Start > All Programs > Kodak > Kodak AiO Printer Tools.

4.Make sure that KODAK ESP C315 Series AiO - Connected appears in the lower left corner of the Printer Tools window.

NOTE: If KODAK ESP C315 Series AiO - Connected does not appear in the lower left corner, click Select, then click Refresh List and choose your printer from the list; click Install KODAK Printer and follow the on-screen instructions.

5.Under Printer Resources, click Check for Printer (Firmware) Updates.

6.If there are updates, click Next and follow the on-screen instructions.

IMPORTANT: Do not turn off or unplug your printer or your computer during the update. Doing so may cause the printer to become inoperable. If the printer is connected wirelessly, make sure you have a stable connection when you perform the update.

Maintaining Your Printer

Updating manually if your printer is connected to a computer with MAC OS

To update the software:

1.Make sure that your computer is connected to the Internet.

2.Open Home Center Software.

3.Select the Tools tab.

4.Click Check for Software Updates.

5.If there are software updates, follow the on-screen instructions for updating your software.

To update the firmware:

1.Make sure that your computer is connected to the Internet.

2.Connect the printer to the computer with a USB cable or wirelessly (if not currently connected).

3.Open Home Center Software.

4.Select the Tools tab.

5.Click Check for Printer (Firmware) Updates.

6.If there are updates, follow the on-screen instructions.

IMPORTANT: Do not turn off or unplug your printer or your computer during the update. Doing so may cause the printer to become inoperable.

KODAK ESP C315 All-in-One Printer

Monitoring and adjusting printer performance

From the control panel, you can perform tasks to help keep the printer functioning well.

Checking ink levels

To check the ink levels:

1.Press Home.

2.Press to select Maintenance, then press OK.

3.With Check Ink Levels selected, press OK.

The LCD shows approximate levels of ink in the cartridges so you know when it???s time to order replacement cartridges.

NOTE: You can order ink cartridges online. Open Home Center Software and select Order Supplies.

Resetting factory defaults

To reset defaults to the factory default settings:

1.Press Home.

2.Press to select Printer Settings, then press OK.

3.Press to select Reset All Settings, then press OK.

4.When you see the message, ???This will reset printer settings to factory defaults,??? press OK.

NOTE: Resetting factory defaults does not change the date and time, language, country/region, or network settings.

9Product and Safety Specifications

The following specifications are subject to change without notice.

Specifications and features

Print performance

ISO/IEC 24374 ESAT 6 ipm

ISO/IEC 24374 ESAT 4 ipm

Print technology Continuous-tone, thermal inkjet

Print quality modes Draft, Normal, and Best on plain paper

Photo quality mode on photo paper

Photo printing features

Copy document features

Color Black-and-white or color

Quantity 1 to 99 copies

Copy sizes Same Size, Fit-to-Page, 20% to 500%

Plain paper quality Best, Normal, Draft

Brightness ??? 3 to + 3

KODAK ESP C315 All-in-One Printer

Copy photo features

Scanning features

Scanner type Contact Image Sensor (CIS)

Maximum scan size 8.5 x 11.7 in. / 22 x 30 cm

Functions Segmentation scanning

Auto-destination

OCR

Auto picture detection

Paper input tray features

Paper capacity 100 sheets of 20 lb plain paper

20 sheets of photo paper, up to 12 mil (290 gsm) 20 envelopes

Tray size 4 x 6 in. to 8.5 x 14 in. / 10 x 15 cm to 22 x 36 cm

Ink cartridges

Ink handling 2-cartridge, 4-ink system

Ink life 1-year warranty from date of purchase

KODAK ESP C315 All-in-One Printer

System requirements

Computer with WINDOWS OS

Minimum

Operating system

CPU

Clock speed

Memory

Available hard disk space Interface Removable drive

WINDOWS 7, VISTA, or XP (SP2 or later) INTEL CELERON Processor

1.2 GHz

512 MB RAM

500 MB available USB 2.0 High Speed

CD-ROM

Computer with MAC OS

Minimum

Operating system MAC OS X 10.4.8 or later

CPU PowerPC G4, G5, or INTEL-based MAC

Clock speed 1.2 GHz

Memory 512 MB RAM

Available hard disk space 200 MB available

Interface USB 2.0 High Speed

Removable drive CD-ROM

Paper types supported

Product and Safety Specifications

Paper sizes supported

Plain paper A4 (8.3 x 11.7 in. / 21 x 30 cm)

A5 (5.8 x 8.3 in. / 15 x 21 cm.)

A6 (4.1 x 5.8 in. / 11 x 15 cm)

B5 (6.9 x 9.8 in. / 18 x 25 cm)

US Executive (7.3 x 10.5 in. / 18 x 27 cm)

US Letter (8.5 x 11 in. / 22 x 28 cm)

US Legal (8.5 x 14 in. / 22 x 36 cm)

Custom sizes from 4 to 8.5 in. / 10 to 22 cm wide and 6 to 14 in. / 15 to 36 cm long

Labels A4 (8.3 x 11.7 in. / 21 x 30 cm)

US Letter (8.5 x 11 in. / 22 x 28 cm)

Index card stock 4 x 6 in. / 10 x 15 cm cards

5 x 7 in. / 13 x 18 cm index cards

Iron-on transfers A4 (8.3 x 11.7 in. / 21 x 30 cm)

US Letter (8.5 x 11 in. / 22 x 28 cm)

Envelopes C5 (6.7 x 9 in. / 16 x 23 cm)

C6 (4.5 x 6.4 in. / 11 x 16 cm)

DL (designated long) (11 x 22 cm / 4.3 x 8.7 in.)

US #7?? (3.9 x 7.5 in. / 10 x 19 cm)

US #9 (3.9 x 8.9 in. / 10 x 23 cm)

US #10 (4.1 x 9.5 in / 10.5 x 24 cm)

Photos 4 x 6 in. / 10 x 15 cm 4 x 7 in. / 10 x 18 cm 4 x 8 in. / 10 x 20 cm 4 x 12 in. / 10 x 31 cm 5 x 7 in. / 13 x 18 cm 7 x 10 in. / 18 x 25 cm 8 x 10 in. / 20 x 25 cm

US Letter (8.5 x 11 in. / 22 x 28 cm)

A4 (8.3 x 11.7 in. / 21 x 30 cm)

KODAK ESP C315 All-in-One Printer

Safety information

KODAK ESP C315 All-in-One Printers are Class 1 LED Products.

???Always follow all warnings and instructions marked on the product.

???Use only the power source indicated on the product regulatory label.

???Use only the power cord that comes with the product (or an approved power cord greater or equal to H05W-F, 3G, 0.75mm2). Using another power cord may cause fire and/or shock. Do not use the included power cord with any other equipment.

???If you do not use this product for a long period of time, unplug it from the electrical outlet.

???Always turn this product off by using the On/Off button. Wait until the On/Off button stops flashing before removing the power plug from the outlet.

???Do not allow the power cord to become damaged or frayed.

???If you need to use an extension cord with this product, make sure that the ampere rating of the product does not exceed the ampere rating of the extension cord.

???Place the product on a flat, stable surface that extends beyond the product???s base in all directions. This product will not operate properly if tilted or at an angle.

???When storing or transporting this product, do not tilt or stand it on its side. Never turn this product upside down (ink can leak out of the product).

???Avoid placing this product in an environment that is subject to rapid changes in temperature or humidity, mechanical shocks, vibration, or dust. Do not place near radiators, heating vents, or in direct sunlight.

???Leave enough room around this product for sufficient ventilation.

???Do not block this product???s covers or openings, or insert any objects through slots.

???Do not use aerosol products inside or around this product.

???Do not spill any liquid on this product.

???Do not attempt to repair or service this product.

???If the power cord or plug is damaged, if any liquid has been spilled onto the product, if the product has been dropped or the case damaged, if the product does not operate normally or exhibits a major change in performance level, unplug this product and contact Kodak at www.kodak.com/go/contact.

Product and Safety Specifications

LCD screen safety

???Use only a dry, soft cloth to clean the LCD screen. Do not use any liquid or chemical cleaners.

???If the LCD screen is damaged, contact Kodak immediately. If any of the solution from the display gets on your hands, wash them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush your eyes immediately with water. If any discomfort or change in vision persists after washing, seek medical attention immediately.

Ink cartridge safety

???Keep all ink cartridges out of the reach of children.

???If ink gets on your skin, wash with soap and water. If ink gets into your eyes, flush immediately with water. If any discomfort or change in vision persists after washing, seek medical attention immediately.

???For Material Safety Data Sheets (MSDS) on inks, go to www.kodak.com/go/MSDS.

KODAK ESP C315 All-in-One Printer

Regulatory compliance

FCC statement

The United States Federal Communications Commission (in CFR 47 Part 15.105) has specified that the following notice be brought to the attention of the users of this product:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the equipment and receiver

???Connect the product into an outlet on a circuit different from that to which the receiver is connected.

???Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this product not expressly approved by Eastman Kodak Company might cause harmful interference and void the FCC authorization to operate this product.

The radiated energy from this product is well below the FCC radio frequency exposure limits. Nevertheless, the product shall be used in such a manner that the potential for human contact during normal operation is minimized. This product and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC exposure limits, human proximity shall not be less than 20 cm (8 inches) during normal operation.

Product and Safety Specifications

Canadian statements

This product meets the applicable Industry Canada technical specifications.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Industry Canada (IC) Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your person.

European compliance statement

Hereby, Kodak declares that this wireless KODAK All-in-One Printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

German compliance statement

CAUTION:

This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view.

CAUTION:

Das Ger??t ist nicht f??r die Benutzung im unmittelbaren Gesichtsfeld am

Bildschirmarbeitsplatz vorgesehen. Um st??rende Reflexionen am

Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren

Gesichtsfeld platziert verden.

Noise emissions for this equipment do not exceed 70 dBa.

This equipment is not intended for use in the workplace in accordance with

BildscharbV regulations.

???Das Ger??t ist nicht f??r die Benutzung am Bildschirmarbeitsplatz gem???? BildscharbV vorgesehen.???

KODAK ESP C315 All-in-One Printer

REACH Article 33 declarations

Go to www.kodak.com/go/REACH for information about the presence of substances included on the candidate list according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).

Waste electrical and electronic equipment labeling

In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.

ENERGY STAR?? Qualified All-in-One Printer

To conserve energy, this printer will enter a reduced power (sleep) mode automatically after 1 hour. You can adjust the delay time (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.

ENERGY STAR and the ENERGY STAR mark are registered U.S. service marks. As an ENERGY STAR partner, Kodak has determined that this product meets ENERGY STAR Guidelines for energy efficiency. For more information on the ENERGY STAR program, see www.energystar.gov.

Product and Safety Specifications

Warranty Information

Limited Warranty

Kodak warrants Kodak consumer electronic products and accessories (???Products???), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.

Limited Warranty Coverage

Warranty service is only available from within the country where the Products were originally purchased. You may be required to send Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under this warranty. If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodak???s control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak???s operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty.

KODAK MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY FOR THIS PRODUCT, AND DISCLAIMS THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak???s only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services or claims of your customers for such damages resulting from the purchase, use or failure of the Product), regardless of cause, or for breach of any written or implied warranty is expressly disclaimed.

Your Rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction. Your statutory rights are not affected.

Outside the United States and Canada

In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.