KODAK HERO 2.2
Extended User Guide
KODAK HERO 2.2
Extended User Guide
Eastman Kodak Company
Rochester, NY 14650
?? Eastman Kodak Company, 2012
Kodak, Hero, and Perfect Touch are trademarks of Eastman Kodak Company. Specifications are subject to change without notice.
August 2012
1Printer Overview
Components
21 
20
19 
18 
17 
16
This printer lets you print, copy, scan, and fax pictures and documents. In addition, this printer supports networking, letting you access the printer over a wireless
10
11
12
13
**When lit, signals the printer is connected to a wireless network; blinks when searching for an available
Printer Overview
Control panel
6
5
4
KODAK HERO 2.2
Home Center Software
KODAK Home Center Software is installed with your KODAK
NOTE: You can choose to install the KODAK AiO Printer Software Essentials, which include the drivers and Printer Tools only.
On a computer with WINDOWS Operating System (OS), you can use Home
Center Software to:
???browse, crop, enhance, and edit pictures
???print and scan
???make 3D pictures (from picture pairs taken to create 3D pictures)
???print from video
???send images to or print images from FACEBOOK Social Network, FLICKR, PHOTOBUCKET, PICASA Photo Management Systems, and GOOGLE Docs
???configure your printer
???install new network printers
???upgrade to the latest printer software and firmware
???order supplies
???access the KODAK Tips and Projects Center
???access the Online Printer Management Tool
On a computer with MAC OS, you can use Home Center Software to:
???scan
???configure your printer
???upgrade to the latest printer software and firmware
???order supplies
???see the status of your printer
???access the KODAK Tips and Projects Center
???access the Online Printer Management Tool
Printer Overview
Ordering supplies
You can order ink cartridges, paper, and accessories online. An Internet connection is required.
To order ink directly from Home Center Software:
1.Open Home Center Software.
2.Select Order Supplies (on a computer with WINDOWS OS) or select the Tools tab, then click Order Supplies (on a computer with MAC OS).
3.Select the item(s) you want to buy, then follow the
To order supplies directly from the Web:
???For ink, go to www.kodak.com/go/printingsupplies
???For paper, go to www.kodak.com/go/inkjetpaper
KODAK HERO 2.2
Configuring printer settings
NOTE: When you first power on the printer, the LCD prompts you to select the
Language and Country/Region.
To set or change basic printer settings:
1.Press 
.
2.Press 
to select Printer Settings, then press OK.
3.Press 
to select one of the following settings:
???Date and Time
???Press OK, then press 
to select Year, Month, Day, Hour, or Minute.
???Press 
or 
to change the values; press OK when you are done.
???Press 
to return to the Printer Settings menu.
???Button Sounds
???Press 
to select Off, Soft, or Loud.
???Time to Low Power
To conserve energy, your printer will enter a low power (sleep) mode after being idle for a default delay time of 1 hour. You can increase the delay time to low power (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.
???Press 
to change the time to
???Tagged Images Printing (see Printing tagged pictures, page 49)
???Press 
to select Off or On.
???Language
???Press OK, press 
to select a language, then press OK.
???Country/Region
???Press OK, press 
to select a country or region, then press OK.
???Reset All Settings (see Resetting factory defaults, page 103)
NOTE: Resetting factory defaults does not change the date and time, language, country/region, or network settings.
???Printer Info
???Press OK to view the Firmware Version number; press OK when you are done.
4.Press 
to return to the Main Menu.
2Networking Your Printer
This section explains how to configure or change your wireless network settings.
Connecting to a wireless network
To connect your printer to an 802.11b/g/n wireless
Before you connect
You need:
???a wireless router.
???to determine whether your wireless router supports
NOTE: If you have specific questions about your router, see your router manufacturer???s documentation for more information.
Connecting to a wireless network using the
You can use the
Connecting to a
To connect your printer to your wireless network, you need to know the network name, also called the Service Set Identifier (SSID). You can obtain your network name from the wireless router. See the manufacturer's documentation for more information.
If you have enabled security on your network, you also need to know the security string (passphrase or password), which may be a Wired Equivalent Privacy (WEP) or a
Record your network information using the correct uppercase and lowercase letters.
Network Name (SSID): _______________________________________
Security String
1.Press 
.
2.Press 
to select Network Settings, then press OK.
3.With
NOTE: The
Networking Your Printer
The
If there are additional networks than can be shown on the LCD, press 
to view them.
4.Press 
to select your network name, then press OK.
If you don???t see your network in the list, or if you want to change your network, select Rescan for Wireless Networks, then press OK.
NOTE: If the name of your network is not listed, make sure your wireless router is turned on and within range.
5.If your network requires a password, use the LCD keyboard to enter your Security String. The Security String is
On the control panel, press 
, 
, 
or 
to select the letters and numbers. When you are finished, select DONE, then press OK.
6. When the confirmation message appears, press OK.
KODAK HERO 2.2
When the printer is successfully connected, the
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2+xxxx).
7.If you haven???t yet installed the KODAK
NOTE: If you do not have the CD:
a.Go to www.kodak.com/go/aiodownloads.
b.In the results list, click the link for KODAK
c.Follow the
Connecting to a WPS wireless router
If your router supports
To connect to a network using WPS:
1.Press 
.
2.Press 
to select Network Settings, then press OK.
3.With
NOTE: The
4.With WPS Connect selected, press OK.
Networking Your Printer
5.Select one of two methods of connecting:
IMPORTANT: Before you press OK on the printer, make sure you know where the router's push button is, or where to enter the generated PIN. If necessary, consult your Internet Service Provider or router device manufacturer???s documentation for more information.
6. When the confirmation message appears, press OK.
When the printer is successfully connected, the
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2+xxxx).
7.If you haven???t yet installed the KODAK
NOTE: If you do not have the CD:
a.Go to www.kodak.com/go/aiodownloads.
b.In the results list, click the link for KODAK
c.Follow the
KODAK HERO 2.2
Setting up an IP Address
IMPORTANT: You should only need to set up an IP Address for your printer if you are having a problem connecting your printer to a wireless network. Typically, it is not necessary to set up an IP Address. This procedure is for advanced users.
All IP Address entries have the following format: 000.000.000.000. Within each
The address as it may appear in your documentation
How to enter the address in the printer menu
To set up your IP Address on the printer:
1.Press 
.
2.Press 
to select Network Settings, then press OK.
3.Press 
to select Advanced IP Address Setup, then press OK.
4.Press OK again to continue.
5.Select one of the following, then press OK:
???Dynamic (DHCP)
???Manual (Static)
6.If you selected Manual (Static), you are prompted to enter an IP Address, a Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after each entry. Use the navigation buttons to enter each digit of the numbers.
Consult your Internet Service Provider or network administrator for more information.
Networking Your Printer
Viewing the network configuration
To view the network configuration and verify that you are connected to your wireless network:
1.Press 
.
2.Press 
to select Network Settings, then press OK.
3.Press 
to select View Network Configuration, then press OK.
The wireless or Ethernet network settings appear on the LCD, including:
???Connection
???IP Address
???Printer Name
???Printer Hostname
???Connected Network SSID
???Speed
???IP Address Type
???Network Subnet
???Security
???Authentication
???Channel
???Region
???Radio (on/off)
???MAC Address
If the printer is connected to your network, you will see the network name and the word CONNECTED.
4.To scroll through the information, press 
.
5.When you are done, press OK.
Printing the network configuration
To print the current network configuration:
1.Load plain paper into the printer. (See Loading plain paper, page 37.)
2.Press Home.
3.Press 
to select Network Settings, then press OK.
4.Press 
to select Print Network Configuration, then press OK.
KODAK HERO 2.2
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK
???Insert the CD that came with the printer into the computer CD drive, and follow the
NOTE: If you do not have the CD:
a.Go to www.kodak.com/go/aiodownloads.
b.In the results list, click the link for KODAK
c.Follow the
Connecting to another KODAK
If you are connecting to a newer model printer (for example, you have an ESP Office 2150 Printer and now you are adding a HERO 2.2 Printer), you must install the KODAK
NOTE: When you install the new software, the printer driver for the ESP Office 2150 Printer will be uninstalled, and updates for the ESP Office 2150 Printer will be installed in addition to the driver for the HERO 2.2 Printer.
On a computer with WINDOWS OS:
???Select Start > All Programs > Kodak > KODAK Printer Setup Utility.
???If your wireless printer (example: KodakHERO2.2+xxxx) is not listed:
a.Select No, my printer is not listed, then click Next.
b.From the
c.Select Network -
d.When driver installation is complete, click Done.
???If your wireless
a.Select the
b.Select Yes, my printer is listed, then click Next.
On a computer with MAC OS:
1.Select Apple > System Preferences.
2.Under Hardware, select Print & Fax (for MAC OS 10.5 and 10.6) or Print & Scan (for MAC OS 10.7).
3.Click + in the dialog box.
4.For MAC OS 10.5 and 10.6: select your printer from the list, then click Add.
Networking Your Printer
Adding a wireless network connection to a
You can change the way you connect to your printer at any time.
Changing from USB to a wireless connection
To change the printer connection type from USB to a wireless
If your printer is connected to a computer with WINDOWS OS:
1.Disconnect the USB cable from your printer and computer.
2.On your computer, disable any firewall you have installed until you have successfully completed the installation.
3.If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, page 6.
4.Select Start > All Programs > Kodak > KODAK Printer Setup Utility.
???If your wireless
a.Select No, my printer is not listed, then click Next.
b.Select your printer from the list.
c.Select Network -
d.When driver installation is complete, click Done.
???If your wireless
a.Select the
b.Select Yes, my printer is listed, then click Next.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2+xxxx).
If your printer is connected to a computer with MAC OS:
1.Disconnect the USB cable from your printer and computer.
2.If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, page 6.
3.Select Apple > System Preferences.
4.Under Hardware, select Print & Fax (for MAC OS 10.5 and 10.6) or Print & Scan (for MAC OS 10.7).
5.Click + in the dialog box.
6.For MAC OS 10.5 and 10.6: select your printer from the list, then click Add.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2+xxxx).
3Online Printer Management Tool
The KODAK Online Printer Management Tool lets you access your printer through an Internet browser (for example, INTERNET EXPLORER, FIREFOX, SAFARI, CHROME) on any computer that is on the same network as your printer.
IMPORTANT: Your computer and your printer must be on the same network. The Online Printer Management Tool is not available if your printer is connected
to a computer with only a USB cable.
With the Online Printer Management Tool, you can:
???view printer status
???configure (or change) printer settings
???change fax settings and add entries to the Fax phone book
???create Scan to Email and Scan to Network Folder profiles (that you can access from the printer control panel)
???add entries to the Email Address book
???set up accounts for GOOGLE Cloud Print and KODAK Email Print Service
Online Printer Management Tool
Accessing the Online Printer Management Tool
Access the Online Printer Management Tool in one of the ways described below.
Directly from Home Center Software v7.x or higher:
1.Open Home Center Software.
2.Select Printer Tools on a computer with WINDOWS OS, or Tools on a computer with MAC OS.
3.Make sure that the name of your wirelessly connected printer appears in the bottom left of the window.
NOTE: A printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2+XXXX). If a different printer name appears, click Select, then choose your wirelessly connected printer.
4.Under Online Printer Tools, select Online Printer Management. The Online Printer Management Tool opens.
From a computer or mobile device:
NOTE: Your computer or mobile device must be connected to the same network as your printer.
1.Get the IP Address of your wirelessly connected printer:
a.On your printer control panel, press Home.
b.Press 
to select Network Settings, then press OK.
c.Press 
to select View Network Configuration, then press OK.
d.Press 
to see the IP Address in the format xxx.xxx.xxx.xxx. (See Viewing the network configuration, page 11.)
NOTE: If you prefer a printout, press 
to select Print Network Configuration, then press OK. A Network Configuration Page prints, including the IP Address in the format xxx.xxx.xxx.xxx.
2.On your computer, open your preferred Internet browser (for example,
INTERNET EXPLORER, FIREFOX, SAFARI, CHROME).
3.Type the printer IP Address in the browser address (URL) bar, then press Enter. The Online Printer Management Tool opens.
KODAK HERO 2.2
Using the Online Printer Management Tool
Configuring printer settings
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Device > General, Date & Time, or Reset, and make any necessary changes.
4. Click Save.
NOTE: Select Reset to restore the default settings, if necessary.
Online Printer Management Tool
Changing the printer name
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Network tab.
3.Select General > Friendly Name.
4.Highlight the text in the Friendly name field and type the name you want, then click Save.
KODAK HERO 2.2
Adjusting fax settings
Editing the fax phone book
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Fax > Phone Book.
To add a phone book entry:
1.Type the name and fax number, and, optionally, select a quick dial number for your fax entry.
2.Click Add.
Online Printer Management Tool
To edit a phone book entry:
1.Select the check box for an existing entry in the Phone Book.
2.Click Edit.
3.Make the changes.
4.Click Save, then click OK.
To delete a phone book entry:
1.Select the check box for an existing entry in the Phone Book.
2.Click Delete, then click Yes.
Changing fax settings
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Fax > Settings.
4.Enter the sender information.
This information appears in the header of faxes you send from your printer. (For more information about sender information, see Entering fax sender information, page 78.)
KODAK HERO 2.2
5.Adjust any fax settings, as necessary. (For more information about settings, see Selecting fax settings, page 79.)
6.Click Save.
Setting up Scan To Email
When you scan with your printer, you can send the scans directly from the printer to an email recipient. To do so, you must first set up a profile for yourself, and define the email address(es) to which you want to send scans.
Creating the outgoing email profile
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Scan To Email > Email Profile.
4. Click Add New Outgoing Email Profile.
Online Printer Management Tool
5.In the Profile Name field, type a name that has meaning to you; for example, your initials and your email provider, such as LR Hotmail or LR Gmail.
This name will appear on the printer control panel for you to select when you start a scan to be sent through email.
6.In the From Email Address field, type your email address.
Although the email will be sent from the printer, any replies will go to this email address.
KODAK HERO 2.2
7.Under Email Server Settings, enter your email service provider.
???If your email service provider is Gmail, Yahoo, AOL, or Hotmail, select your services from the
???If your email service provider is not in the
a.Type the email server name or the IP address of your email service provider in the Email Server field.
b.Type the port number of your email server in the Port Number field.
NOTE: Locate this information in the email account properties fields in your email application, or contact your Internet Service Provider.
c.If your mail server supports secure connection mode, select the Always use a secure connection check box.
8.If your email server requires authentication for sending emails:
a.Select the The email server requires authentication for outgoing email check box.
b.Type the User ID and Password for your email account.
Online Printer Management Tool
9.If you want to limit who uses your profile (which appears on the printer LCD) to send scans:
a.Select the Enable Access Pin check box.
b.Type a
10.If you want a copy of all email messages, select the Copy sender for all email messages sent from the printer check box.
11.Click Test Profile to confirm that the printer can access your account.
??? If the printer can access your account, ???Test profile: Successful??? appears. Click OK, then click Save.
??? If the printer cannot access your account, ???Test Profile: Failed??? appears. Click OK, then make changes to the profile.
Setting up the email address book
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Scan To Email > Address Book.
KODAK HERO 2.2
4.For each person:
a.Type the person???s Name.
b.Type the person???s Email Address.
c.Click Add.
Setting options for scan to email
When you send a scan to an email address, the printer uses defaults ??? subject line, body, and scan settings ??? that you set up under email options.
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Scan To Email > Email Option.
4.Select and replace the default subject line and body text, if desired.
This subject line and body text will be included with every scan you send to an email address.
Online Printer Management Tool
5. Select the scan settings that will be used for all scans sent to email.
NOTE: You can enter a Filename Prefix of your choice.
6. Click Save, then click OK.
You can now send a scan to an email address from the printer control panel. See Scanning from the printer control panel, page 68.
KODAK HERO 2.2
Setting up Scan To Network Folder
You can scan documents or photos directly to a file in a shared folder on your network.
Before you create a network folder profile
You must identify or create a network shared folder on a computer connected to the same network as your printer. Note the network name of the folder, including the path information, and the name of the computer where it is located.
To learn more about sharing folders, see the information in the links below.
???For computers with WINDOWS XP OS, see www.microsoft.com/windowsxp/using/networking/maintain/share.mspx
???For computers with WINDOWS VISTA OS, see
???For computers with WINDOWS 7 OS, see
???For computers with MAC OS 10.5 or later, see support.apple.com/kb/ht1549
Online Printer Management Tool
Adding a network folder profile
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Scan To Network Folder > Network Folder Profile.
4.Click Add New Network Folder Profile.
KODAK HERO 2.2
5. Enter a Profile Name and a Folder Path.
6.If the computer where the folder is located requires authentication to access its shared folders, type the network login User Name and Password.
7.If you want to limit who uses your profile to scan documents to your network folder, select the Enable Access PIN check box and type a
8.Click Test Profile to confirm that the printer can access the network folder.
???If the printer can access the network folder, ???Test profile: Successful??? appears. Click OK, then click Save.
???If the printer cannot access the network folder, ???Test Profile: Failed??? appears. Click OK, then make changes to the network folder profile.
You are now ready to scan a document or photo to your network folder from the printer control panel. See Scanning from the printer control panel, page 68.
Online Printer Management Tool
Setting scan settings for scan to network folder
When you send a scan to network folder, the printer uses defaults that you set up under scan settings.
1.Select Scan To Network Folder > Scan Settings.
2.Select the scan settings that will be used for all scans sent to a network folder: NOTE: You can enter a Filename Prefix of your choice.
3. Click Save, then click OK.
You can now send a scan to a network folder from the printer control panel. See Scanning from the printer control panel, page 68.
KODAK HERO 2.2
Changing printer settings for copying and printing
You can change the default printer settings for copying documents and photos, and for printing photos.
Changing Copy Document and Copy Photo settings
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Copy & Print > Copy Document or Copy Photo.
4.Make the changes you want in the appropriate fields.
5.Click Save, then click OK.
Online Printer Management Tool
Changing Print Photo settings
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Copy & Print > Print Photo.
4.Make the changes you want in the appropriate fields, then click Save.
KODAK HERO 2.2
Setting up Cloud Printing
Registering your printer with Google Cloud Print??? and KODAK Email Print Service
Your printer lets you print from anywhere in the world from your smartphone, tablet, or computer that uses Google Cloud Print enabled apps.
KODAK Email Print lets you send emails and email attachments to your printer using any email account.
You must register your printer with a GOOGLE Account to enable these features.
1.Make sure your printer and computer are connected to the same network (see Networking Your Printer, page 6).
2.Make sure you have the latest version of Home Center Software and printer firmware (see Updating the software and printer firmware, page 101).
3.Do one of the following:
???Open Home Center Software, then click Cloud Printing Setup.
???Depending on your Operating System, use the path below to select Cloud Printing Setup.
???WINDOWS XP OS: Select Start > Programs > Kodak > KODAK AiO Printer Tools, then click Cloud Printing Setup.
???WINDOWS VISTA and 7 OS: Select WINDOWS icon > All Programs >
Kodak > KODAK AiO Home Center > Printer Tools, then click Cloud Printing Setup.
???MAC OS: Select KODAK AiO Home Center > Tools, then click Cloud Printing Setup.
4.In the Google Cloud Print Setup window, click Start Now.
5.Follow the
NOTE: You may need to sign in to your GOOGLE Account during the setup process.
6.When you see the ???Thanks, you???re ready to go!??? message, close the window and return to Google Cloud Print Setup.
7.Click Claim Address, then click Accept.
NOTE: If you want to change the email address of your printer, click Change Email and follow the
8.Make sure you have plain paper loaded in the printer.
A page will be sent to your printer to indicate that your printer has been successfully set up. This make take a few minutes. The page includes the email address of your printer.
For information about printing, see Printing using Google Cloud Print, page 52, and Printing using KODAK Email Print Service, page 53.
Online Printer Management Tool
Editing a Google Cloud Print??? Account
Once you have successfully registered your printer with Google, you can make edits to various fields.
1.Open the KODAK Online Printer Management Tool (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab.
3.Select Cloud Printing > Google Cloud Print.
4.Click Edit Settings.
5.Make the changes you want in the appropriate fields, then click Save.
Editing the settings for KODAK Email Print Service
1.Do one of the following:.
???Go to www.kodakeprint.com.
???If the Online Printer Management Tool is open, select the Settings tab, then
Cloud Printing > KODAK Email Print Service. Click to edit the options for KODAK Email Print Service.
2.If necessary, sign in to your GOOGLE Account.
3.Click Settings (next to your printer name). Make sure the check box next to Enabled is selected.
Changing the Email address for your printer
When you registered your printer with KODAK Email Print Service, an email address was assigned to your printer. To change your printer email address:
1.Click edit (next to the Printer Email address).
2.Type the new email address, then click Check to make sure it is an address you can use.
3.When you have a valid email address, click Accept.
4.Make sure you have letter or A4 size paper loaded in the printer. A page that includes the new address of your printer will print.
Printer Settings
You can make changes to the default settings, as needed.
1.With the Printer Settings tab selected, make any changes.
If you clear the check box next to Print Email Body, only attachments will print.
2.Click Save.
KODAK HERO 2.2
Allowed Users
To control who can send emails to your KODAK Printer email address:
1.Click the Allowed Users tab. Next to Access Control, click Edit.
2.From the
3.To add an email address to the allowed users, click Add.
4.Type the email or domain information, then click the Save icon. NOTE: To delete an email or domain, click the Trash Can icon.
History
Click the History tab to see a list of printed emails with the time, sender, subject, and status.
To delete an item from the list, click the check box next to it, then click the Trash Can icon.
4Handling Paper
For the best document printing results, use KODAK Document Papers or a paper with the COLORLOK Technology logo on the package. Use only paper that is designed for inkjet printers.
For the best photo printing results, use KODAK Photo Papers, which are optimized to work with KODAK
When handling photo paper:
???Hold the paper by the edges; avoid placing your fingerprints on it.
???Do not touch the glossy side of photo paper.
???Store paper flat, away from direct sunlight and heat.
Paper types
You can use:
???Plain paper ??? 16 to 24 lb / 60 to 90 gsm
???Photo paper ??? up to 12 mils (up to 290 gsm)
???Card stock ??? 110 lb / 200 gsm, max
???Envelopes ??? 20 to 24 lb / 75 to 90 gsm
???Transparencies ??? all inkjet varieties with white stripe on short edge
???Labels ??? all inkjet varieties on 8.5 x
???
KODAK HERO 2.2
Paper sizes
The paper tray accepts the following paper sizes:
The paper tray accepts the following standard paper sizes:
???4 x 6 in. / 10 x 15 cm
???4 x 7 in. / 10 x 18 cm
???4 x 8 in. / 10 x 20 cm
???4 x 12 in. / 10 x 31 cm
???5 x 7 in. / 13 x 18 cm
???7.3 x 8.5 in. / 19 x 22 cm
???7 x 10 in. / 18 x 25 cm
???US Executive (7.3 x 10.5 in. / 18 x 27 cm)
???8 x 10 in. / 20 x 25 cm
???US letter (8.5 x 11 in. / 22 x 28 cm)
???Legal (8.5 x 14 in. / 22 x 36 cm)
???A4 (8.3 x 11.7 in. / 21 x 30 cm)
???A5 (5.8 x 8.3 in. / 15 x 21 cm)
???A6 (4.1 x 5.8 in. / 11 x 15 cm)
???B5 (6.9 x 9.8 in. / 18 x 25 cm)
NOTE: Do not load paper smaller than 4 x 6 in. / 10 x 15 cm.
Envelope sizes
The printer accepts the following envelope sizes:
???C5 (6.7 x 9 in. / 16 x 23 cm)
???C6 (4.5 x 6.4 in. / 11 x 16 cm)
???DL (4.3 x 8.7 in. / 11 x 22 cm)
???US #7?? (3.9 x 7.5 in. / 10 x 19 cm)
???US #9 (3.9 x 8.9 in. / 10 x 23 cm)
???US #10 (4.1 x 9.5 in. / 10 x 24 cm)
IMPORTANT: Do not load envelopes with cutout or clear windows.
Handling Paper
Loading paper
Loading plain paper
The capacity of the paper tray is 100 sheets of plain paper.
Click to view a video that demonstrates loading plain paper.
1. Lift the paper input tray.
2.Move the left
3.Pull out the output tray and the extender until they are fully extended.
4. Fan and stack the paper.
KODAK HERO 2.2
5.Move the ADF
6. Move the
Loading photo paper
The capacity of the paper input tray is 20 sheets of photo paper.
Click to view a video that demonstrates loading photo paper.
1.Remove any plain paper from the tray.
2.Move the left
3.Insert the paper (short side first) into the input tray with the logo side facing toward the tray and the glossy side toward you.
IMPORTANT: Always load the paper short side first. The printer automatically detects the orientation of the picture, whether it???s portrait or landscape, and prints accordingly. If the photo paper is loaded in the wrong direction, the image will be cut off and the paper may jam. If the paper is loaded with the wrong side up, the image quality will be affected.
4. Move the
Handling Paper
Loading envelopes
The capacity of the paper input tray is 20 envelopes.
IMPORTANT: Do not load envelopes with cutout or clear windows.
1.Remove any paper from the tray.
2.Move the left
3.Insert the envelope(s) into the tray with the flap away from you and the top of the envelope against the right side of the tray.
4. Move the
KODAK HERO 2.2
Loading originals
You can place originals for copying, scanning, or faxing on the scanner glass or in the ADF (Automatic Document Feeder). The ADF automatically feeds the originals into the printer when you begin copying, scanning, or faxing.
NOTE: Keep the scanner glass clean. Any dirt or smudges on the glass will appear as marks on the copy. See Cleaning the scanner glass and document backing, page 92.
Using the scanner glass
1.If necessary, remove any originals from the ADF.
2.Lift the scanner lid, and place the original face down in the right front corner.
3. Close the scanner lid.
Handling Paper
Using the Automatic Document Feeder (ADF)
You can load up to 25 originals (20 to 24 lb / 75 to 90 gsm plain paper) in the automatic document feeder (ADF).
The ADF accepts originals in the following sizes:
IMPORTANT: Do not load photographs, cards, or any paper stock heavier than 24 lb / 90 gsm or lighter than 16 lb / 60 gsm in the ADF.
1.Remove any originals from the scanner glass.
2.Move the ADF
ADF
ADF tray extender
3.Fan and stack the originals, then insert them face up in the ADF.
IMPORTANT: Remove all paper clips and staples from the originals.
4. Move the ADF
The ADF automatically feeds the originals into the printer when you begin copying, scanning, or faxing.
5Printing
Print documents and
Printing documents
Printing
The default is for documents to print on one side of the paper.
To print a document from your computer:
1.Open the document.
2.Select File > Print.
3.In the Print dialog box, select your KODAK Printer.
4.Choose the pages to print, number of copies, etc, then click OK (on a computer with WINDOWS OS) or Print (on a computer with MAC OS).
Printing
You can print
Automatic
The duplexer can print
???letter (8.5 x 11 in. / 22 x 28 cm)
???A4 (8.3 x 11.7 in. / 21 x 30 cm)
???B5 (6.9 x 9.8 in. / 18 x 25 cm)
NOTE: The paper width must be 3.9 to 8.5 in. / 10 to 22 cm. The paper length must be 7 to 11.7 in. / 18 to 30 cm.
The duplexer cannot print:
???borderless prints
???poster layout
Automatic
1.Load plain paper into the paper tray.
2.Open the document you want to print, then select File > Print.
3.In the Print dialog box, make sure that KODAK HERO 2.2 AiO is selected (printers with a wireless connection have a
4.Select the Layout tab.
5.In the
NOTE: You can also select automatic
Printing
6.Under ???Flip on:???, select Long edge or Short edge, then click OK.
7.Click OK to start the print request.
Automatic
1.Load plain paper into the paper tray.
2.Open the document you want to print, then select File > Print.
3.In the Print dialog box, make sure that Eastman Kodak Company HERO 2.2 AiO is selected (printers with a wireless connection have a
4.In the Copies & Pages
5.In the
6.Click Print.
Manual
You can print
IMPORTANT:
Manual
1.Load paper into the paper tray.
2.Open the document you want to print, then select File > Print.
3.In the Print dialog box, make sure that KODAK HERO 2.2 AiO is selected (printers with a wireless connection have a
4.Select the Layout tab.
5.In the
NOTE: You can also select manual
6.Under ???Flip on:???, select Long edge or Short edge, then click OK.
7.Click OK to start the print request.
8.When a message appears on your computer and control panel, remove the printed pages from the output tray, then follow the instructions on the control panel.
9.Press 
on the control panel.
KODAK HERO 2.2
Manual
1.Load paper into the paper tray.
2.Open the document you want to print, then select File > Print.
3.In the Print dialog box, make sure that Eastman Kodak Company HERO 2.2 AiO is selected (printers with a wireless connection have a
4.In the Print dialog box, select the
5.Click Print.
6.When the even pages have finished printing, follow the instructions on the control panel to reload the printed pages in the paper input tray.
7.Press 
on the control panel to print the odd numbered pages.
Printing forms from the control panel
You can print the following forms from the control panel:
???Graph Paper
???Wide Ruled
???Narrow Ruled
???Grocery List
???Reminder List
???
???Sheet Music (Portrait)
???Sheet Music (Landscape)
To print a preprogrammed form:
1.Press 
.
2.Press 
to select Printable Forms, then press OK.
3.Press 
to select a form.
4.Press 
or 
to select a quantity (up to 99), then press OK.
5.Press 
.
Printing
Printing pictures
You can print pictures with your
???A memory card inserted into a memory card slot
???An iPhone, iPod Touch, iPad, BLACKBERRY Device, ANDROID OS Device, or WINDOWS Mobile Device (may not be available with all models). For more information, go to www.kodak.com/go/mobile.
You can also print pictures using Home Center Software from your computer with WINDOWS OS. Home Center Software lets you edit and enhance your pictures quickly. Open Home Center Software, select Edit and Print Pictures, then follow the
On a computer with MAC OS or WINDOWS OS, you can print pictures from any
Viewing pictures on a memory card
When you insert a memory card into the memory card slot a picture appears on the LCD screen. Press 
or 
to scroll through the pictures.
Finding pictures on a memory card
Your printer can help you locate pictures on a memory card by the date the picture was taken or last saved.
1.Insert the memory card into the memory card slot.
2.Press 
.
3.Press 
to select Find Photos, then press OK.
4.Press 
to select Year, Month, and Day, then press 
or 
to set the values. The number of photos found for the date you specified appears under the menu name.
5.Press OK to view the pictures.
KODAK HERO 2.2
Printing from a memory card
You can print pictures from the following cards:
???SD Card
???SDHC Card
???MMC Card
???MEMORY STICK
???Variations of the memory cards listed above that require an adapter (for example, MEMORY STICK Duo, miniSD, and microSD)
IMPORTANT: If you use a memory card with an adapter, make sure you insert and remove the adapter and the memory card as a unit; do not remove the memory card while leaving the adapter in the printer.
Using default settings to print a picture
Unless you change the default settings, the default for printing pictures is one
4 x 6 in. / 10 x 15 cm picture. (To change the default settings, see Save as Defaults at the bottom of the table under Changing the settings and printing pictures, page 47.)
1. Insert the memory card into the memory card slot.
memory card slot
2.Press 
or 
, then press OK to select the picture(s) you want to print.
3.Press 
.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT: To prevent loss of data from your memory card, camera, or portable drive, do not remove it from the printer while printing.
Printing
Changing the settings and printing pictures
You can change the print photos options for an individual picture or group of pictures, or you can change the settings and save them as the default.
1. Insert the memory card into the memory card slot.
memory card slot
2.Press 
or 
, then press OK to select the picture(s) you want to print.
3.Press 
for Print Photos Options.
4.Press 
to select an option (see table below), press OK, then press 
or 
to change the setting.
NOTE: You can also adjust the print photo settings using the Online Printer Management Tool. When viewing the tool in your browser (see Accessing the Online Printer Management Tool, page 15), select the Settings tab, then select Copy & Print > Print Photo.
5. When you have finished changing settings, press 
.
IMPORTANT: To prevent loss of data from your memory card, camera, or portable drive, do not remove it from the printer while printing.
Printing
Printing tagged pictures
Some digital cameras let you tag (or ???mark???) pictures on the memory card for printing. This creates a tag that is recognized by the printer. If you choose to print tagged pictures, they will print according to the default settings on your printer (unless otherwise specified by the tag from the camera).
NOTE: Refer to your camera user guide to determine whether your camera supports tagged pictures (may also be called ???marked??? or ???DPOF???) functionality.
To print tagged pictures:
NOTE: Make sure Tagged Images Printing is On (see Configuring printer settings, page 5).
1. Insert the memory card into the memory card slot.
memory card slot
2. When the ???Print tagged images???? message appears, press 
.
KODAK HERO 2.2
Printing panoramic pictures
To print a panoramic picture, load 4 x 12 in. / 10 x 31 cm paper, or US letter or A4 paper in the paper tray.
1. Insert the memory card into the memory card slot.
memory card slot
2.Press 
or 
to find the panoramic picture you want to print, then press OK.
3.Press 
for Remote Printing Settings.
4.Press 
to select Print Size, then press 
to select 4 x 12.
5.Press 
.
IMPORTANT: To prevent loss of data from your memory card, camera, or portable drive, do not remove it from the printer while printing.
Printing from a wireless device
You can print pictures wirelessly at the touch of a button from:
???iPhone (iOS 3.0 or later)
???iPod Touch (2nd generation)
???iPad
???BLACKBERRY Device (software v4.5 or later)
???a device running ANDROID OS v2.0 or later
???WINDOWS Mobile Device v7.5 or later
For more information, see Mobile Printing, page 52.
Printing
Transferring pictures to a computer
You can transfer your pictures from a memory card to your computer. To transfer these files, the printer must be connected to your computer with a USB cable.
NOTE: If you have large video files or a large number of pictures (400 or more), we recommend that you transfer them using a memory card reader attached directly to your computer.
Transferring pictures to a computer with WINDOWS OS
1.Insert the memory card into the memory card slot on the printer.
2.Press 
.
3.Press 
to select Transfer to PC, then press OK.
4.Press 
.
5.If your computer is connected to a wireless network and with a USB cable, select the
6.Follow the
Transferring pictures to a computer with MAC OS
1.Insert the memory card into the memory card slot on the printer.
2.Press 
.
3.Press 
to select Transfer to PC, then press OK.
4.Press 
.
5.If your computer is connected to a wireless network and with a USB cable, select the
6.Use iPhoto or Image Capture on your computer to complete the transfer.
NOTE: You can also adjust the print photo settings using the Online Printer Management Tool. When viewing the tool in your browser (see Accessing the Online Printer Management Tool, page 15), select the Settings tab, then select Copy & Print > Print Photo.
6Mobile Printing
Mobile printing lets you print to your
When your:
???printer is registered to Google Cloud Print???, you can print from anywhere with your mobile device using Google Cloud Print apps.
???printer has an email address (assigned by KODAK Email Print Service), you can send emails and email attachments to your printer from anywhere, from a device capable of sending email.
???mobile device is connected to the same wireless network as your printer, you can print pictures using a KODAK Pic Flick App or Pic Flick HD App.
When you plan to use mobile printing, make sure that your printer power is on or your printer is in low power mode (for information, see Time to Low Power under Configuring printer settings, page 5).
Printing using Google Cloud Print
Print on the go from your smartphone, computer, or tablet using Google Cloud Print enabled apps.
Before you can use Google Cloud Print, make sure your printer is set up for Google Cloud Print. See Registering your printer with Google Cloud Print??? and KODAK Email Print Service, page 32.
Printing varies by application. For more information, go to
www.google.com/cloudprint/learn/apps.html.
To print from a Chromebook:
Click the wrench and select Print to print the Web page you are viewing (you can also use the keyboard shortcut Ctrl+P).
To print from an iOS mobile device (iPhone, iPad, iPod Touch):
???From GMAIL:
???Email body: Select the email, then click the menu in the
???Attachment: Click the Print button next to the attachment.
???From GOOGLE DOCS Program:
???Select the document, then click the menu in the
Print.
To print from an ANDROID OS device:
Install the KODAK Document Print App from the GOOGLE PLAY Store.
Mobile Printing
To print from a computer:
1.Install the latest version of GOOGLE CHROME Web browser.
2.Click the wrench in the
3.In the Destination
4.Sign in using your GOOGLE Account as needed, then select your printer.
To print from a BLACKBERRY OS device:
We recommend using KODAK Email Print.
Printing using KODAK Email Print Service
Printing emails, documents, and pictures
KODAK Email Print lets you send emails and email attachments (documents and pictures) to your printer from anywhere, using any device capable of sending email.
NOTE: Before you can use KODAK Email Print, your printer must be registered to Google Cloud Print??? (see Registering your printer with Google Cloud Print??? and KODAK Email Print Service, page 32), and your printer must have an email address assigned by KODAK Email Print.
To print using KODAK Email Print:
1.Make sure that your device or computer is connected to the Internet.
2.Open an email application (such as GMAIL, MICROSOFT OUTLOOK, HOTMAIL, YAHOO, iOS Mail, or ANDROID OS Mail).
3.Address the email to your printer email address. Attach the files you want to print; if needed, include any comments in the body of the email.
4.Send the email.
The email attachments (and any comments) will print to your printer.
KODAK HERO 2.2
Printing pictures from a mobile device
When connected to the same
???an iPhone (iOS 3.0 or later), iPod Touch device (2nd generation), iPad (may not be available with all models).
???a BLACKBERRY Device (software v4.5 or later).
???a device running ANDROID OS v2.0 or later.
???a WINDOWS Mobile Device v7.5 or later.
Download the KODAK Pic Flick App from the App Store directly from your device, then follow the procedure for your device. For information, go to www.kodak.com/go/mobile.
Printing pictures from an iPhone, iPad, or iPod Touch device
IMPORTANT: Requires iOS 3.0 or later.
To print a picture from an iPhone, iPad, or iPod Touch device (2nd generation):
1.Make sure your device is connected to the same
2.Open the KODAK Pic Flick App on your device.
NOTE: For best results with an iPad, use the KODAK Pic Flick HD App.
3.Select the picture(s) you want to print, then select Choose Device.
4.Select your KODAK
5.Select Send.
Printing pictures from a BLACKBERRY Device
To print a picture from a BLACKBERRY Device (software v4.5 or later):
1.Make sure your BLACKBERRY Device is connected to the same
2.Open the KODAK Pic Flick App on your device.
3.Select the picture(s) you want to print.
4.Press the Menu key, then select Print.
5.Select your KODAK
NOTE: It may take a few minutes for the printer to appear in the Available Printers list.
6.Select the print size and enter the number of copies.
7.Select Print.
Mobile Printing
Printing pictures and documents from an ANDROID OS Device
NOTE: ANDROID OS v2.0 or later required.
To print a picture using KODAK Pic Flick App:
1.Make sure your device is connected to the same
2.Open KODAK Pic Flick App on your device.
3.Select the picture(s) you want to print.
4.Select View/Edit to edit the picture(s), or go to step 5.
a.Press and hold the screen to enter the edit mode.
b.Rotate, move, pan, zoom, or crop the picture.
5.Press Select Device, then select your KODAK
6.Select the print size.
7.Press Back, then select Send.
To print a picture or document using KODAK Document Print App:
IMPORTANT: Before you can use KODAK Document Print App, your printer must be registered to Google Cloud Print??? (see Registering your printer with Google Cloud Print??? and KODAK Email Print Service, page 32).
1.Download and install the app from the GOOGLE PLAY Store.
2.Launch the KODAK Document Print App.
3.Locate the picture or document you want to print.
4.Sign in with your GOOGLE Account, then select OK.
5.Select your printer from the list.
6.Select Print.
7Copying
You can copy documents and photographs with your
Loading originals for copying
You can copy
IMPORTANT: The ADF accepts plain paper originals from 6.9 to 8.5 in. (18 to 22 cm) wide and 9.8 to 11.7 in. (25 to 30 cm) long.
To copy a photo, documents on thick paper, or a document that is too small or too large to fit in the ADF, place the original face down on the scanner glass.
For more information on loading originals, see Loading originals, page 40.
Copying a document
You can copy a document using the default settings, or you can adjust the quantity, size, quality, and brightness of your copies.
Using the default settings to copy a document
The default settings are either the factory default settings (see Resetting factory defaults, page 103), or defaults that you have set on the printer (see Save as Defaults at the bottom of the table under Adjusting the settings and copying a document, page 57).
1.Place the original document in the ADF or on the scanner glass.
2.Press 
.
3.Press 
or 
to select Copy Document.
4.Press OK.
5.Press 
.
NOTE: If you load the original document in the ADF, the ADF automatically feeds the document into the printer when you begin copying.
Copying
Adjusting the settings and copying a document
1.Place the original document in the ADF or on the scanner glass.
2.Press 
.
3.Press 
to select Copy Document, then press OK.
4.Press 
to select an option, then press 
or 
to change the setting.
5. Press 
.
KODAK HERO 2.2
Changing the number of copies of a document
1.Place the original document in the ADF or on the scanner glass (see Loading originals, page 40).
2.Press 
.
3.Press 
to select Copy Document, then press OK.
4.Press 
or 
to select a number.
5.Press 
to begin copying.
Enlarging or reducing the size of a copy
1.Place the original document on the scanner glass (see Loading originals, page 40).
2.Press 
.
3.Press 
to select Copy Document, then press OK.
4.Press 
to select Copy Size.
5.Press 
or 
to select an enlargement or reduction percentage.
6.Press 
to begin copying.
Darkening or lightening a copy
1.Place the original document in the ADF or on the scanner glass (see Loading originals, page 40).
2.Press 
.
3.Press 
to select Copy Document, then press OK.
4.Press 
to select Brightness.
5.Press 
or 
to select a number below zero for a darker copy, or select a number above zero for a lighter copy.
6.Press 
to begin copying.
Copying
Copying a photo
You can copy a photo using the default settings, or you can make adjustments to the quantity, size, quality, and brightness of your copies.
Using the default settings to copy a photo
The default settings are either the factory default settings (see Resetting factory defaults, page 103), or defaults that you have set on the printer (see Save as Defaults at the bottom of the table under Adjusting the settings and copying a photo, page 60).
1.Lift the scanner lid, and place the original photo face down in the right front corner of the scanner glass.
IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).
2.Close the scanner lid.
3.Press 
.
4.Press 
to select Copy Photo.
5.Press 
.
KODAK HERO 2.2
Adjusting the settings and copying a photo
1.Lift the scanner lid, and place the original photo face down in the
IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).
2.Close the scanner lid.
3.Press 
.
4.Press 
to select Copy Photo, then press OK.
5.Press 
to select an option, then press 
or 
to change the setting.
Copying
6. Press 
.
KODAK HERO 2.2
Changing the number of copies of a photo
1.Lift the scanner lid, and place the photo face down in the
IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).
2.Close the lid.
3.Press 
.
4.Press 
to select Copy Photo, then press OK.
5.Press 
or 
to select a number.
6.Press 
to begin copying.
Copying
Enlarging or reducing the size of a copy of a photo
1.Lift the scanner lid, and place the photo face down in the
IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).
2.Close the lid.
3.Press 
.
4.Press 
to select Copy Photo, then press OK.
5.Press 
to select Copy Size, then press 
or 
to change the size.
6.Press 
to begin copying.
KODAK HERO 2.2
Manual
If the original is not on letter or
1.Load the paper into the paper tray.
2.Place your original on the scanner glass (see Using the scanner glass, page 40).
3.Press 
.
4.Press 
to select Copy Document, then press OK.
5.If necessary, press 
to make changes to the copy settings.
6.Press 
to begin copying.
7.Remove the printed page from the output tray and rotate it 180 degrees, then place the page into the paper tray (printed side down).
8.Place the next original on the scanner glass.
9.If necessary, press 
to make changes to the copy settings.
10.Press 
to begin copying.
8Scanning
Scanning digitizes documents and pictures, and sends the digital files to your computer, memory card, email, or network folder.
To scan to a computer, the Home Center Software must be installed on that computer, unless you are using the Online Printer Management Tool. (See Scanning from the Online Printer Management Tool, page 73.)
When you scan, the digital file can:
???open in Home Center Software (when Home Center Software is loaded and the printer is connected to a computer with WINDOWS OS).
???open in a
???be saved in a format and location that you determine (see Changing the scan settings for scanning from the printer control panel, page 65).
Scanning from a software program on the computer (such as Home Center Software) gives you more options, but you can also scan from the printer control panel.
Before you begin scanning
If you are scanning to a computer, make sure that the printer is connected to the computer using a USB cable or wireless network (see Networking Your Printer, page 6).
If you want to scan to an email address or to a shared network folder, you need to:
???make sure the printer is connected to the computer using a wireless connection.
???set up a profile using the Online Printer Management Tool (see Setting up Scan To Email, page 20 and Setting up Scan To Network Folder, page 26).
Changing the scan settings for scanning from the printer control panel
Before you scan from the printer control panel, you must adjust the scan settings.
NOTE: These settings do not apply to Scan to Email or Scan to Network Folder. To change scan setting for scanning to email or to network folder, see Setting options for scan to email, page 24 or Setting scan settings for scan to network folder, page 29.
1.Open Home Center Software, then select Printer Tools (WINDOWS OS) or Tools (MAC OS) window.
NOTE: To get to Printer Tools without Home Center Software (WINDOWS OS only), select Start > All Programs > Kodak > KODAK AiO Printer Tools.
2.Under the Tools heading, select Printer Scan Settings.
KODAK HERO 2.2
3.Adjust settings for scanning documents and pictures:
a.To select a program that your scanned images or documents will appear in when you scan from the printer control panel:
(1)Select the General tab.
(2)Under the Program List heading, click 
next to the currently selected program.
(3)From the list, select the program in which you want the scanned files to open.
b.To adjust settings for scanning documents, select the Document tab, then select an option for each setting:
c.To adjust settings for scanning pictures, select the Picture tab, then select an option for each setting:
Scanning
NOTE: Before you save a scanned file in Home Center Software, you can preview, crop and sharpen the image, and adjust the color. On a computer with WINDOWS OS, see the Home Center Software Help (? icon) for instructions.
4.When you are finished making selections, click OK on the bottom right of the Printer Scan Settings window.
5.Close the Printer Tools window.
KODAK HERO 2.2
Loading originals for scanning
You can scan
IMPORTANT: The ADF accepts plain paper originals from 6.9 to 8.5 in. (18 to 22 cm) wide and 9.8 to 11.7 in. (25 to 30 cm) long.
To scan a photo, documents on thick or thin paper, or a document that is too small or too large to fit in the ADF, place the original face down on the scanner glass.
For more information on loading originals, see Loading originals, page 40.
Scanning from the printer control panel
When you scan a document or picture(s) from the control panel, you have the following options:
???Scan to Computer - scans to a file or to Home Center Software on your computer
???Scan to Memory Card - scans to a memory card in the memory card slot
???Scan to Email* - scans to an email address that you select from the Email Profile you set up in the Online Printer Management Tool
???Scan to Network Folder* - scans to a shared network folder that you designated in the Online Printer Management Tool
* Before you can use these options, you must set up Scan to Email (see Setting up Scan To Email, page 20) and Scan to Network Folder (see Setting up Scan To Network Folder, page 26) from the Online Printer Management Tool.
Scanning
Scanning to a computer
1.Press 
.
2.Press 
to select Scan, then press OK.
3.Press 
to select Scan to Computer, then press OK.
4.Press 
to select an option, then press 
or 
to change the setting.
5.Press 
. The scanned file appears at the destination you specified.
6.Follow the
KODAK HERO 2.2
Scanning to a memory card
1.Insert the memory card into the memory card slot on the printer.
2.Press 
.
3.Press 
to select Scan, then press OK.
4.Press 
to select Scan to Memory Card, then press OK.
5.Press 
to select an option, then press 
or 
to change the setting.
6. Press 
. The scanned file appears on the memory card.
Scanning
Scanning to email
You can scan your original and immediately send the scanned file by email to one or more recipients directly from the printer.
NOTE: You must first use the Online Printer Management Tool to set up scanning to email options (see Setting up Scan To Email, page 20).
1.Press 
.
2.Press 
to select Scan, then press OK.
3.Press 
to select Scan to Email, then press OK.
4.Select an outgoing email profile (the person from whom the email with the scan attachment is sent), then press OK.
5.If necessary, enter the
6.Select an email recipient, then press OK.
7.Repeat step 5 for each recipient.
8.Press 
.
Scanning to network folder
You can scan your original and immediately send the scanned file to a network folder directly from the printer.
NOTE: You must first use the Online Printer Management Tool to set up scanning to network folder options (see Setting up Scan To Network Folder, page 26).
1.Press 
.
2.Press 
to select Scan, then press OK.
3.Press 
to select Scan to Network Folder, then press OK.
4.Select Sharing folder, then press OK.
5.If necessary, enter the
6.Press 
.
Scanning from the computer
???Open Home Center Software, then:
???on a computer with WINDOWS OS, select Scan Documents and Pictures, then follow the
???on a computer with MAC OS, select the Tools tab, click Scan Application, then follow the
NOTE: If you are not using Home Center Software, open a program that allows you to scan, then follow the instructions.
KODAK HERO 2.2
Scanning multiple pictures simultaneously
Using Home Center Software, you can scan multiple pictures simultaneously and save them as separate files.
When scanning multiple pictures, leave space between the pictures so that the printer can detect the separate pictures. Any pictures that overlap are interpreted as a single picture.
Scanning multiple pictures when connected to a computer with WINDOWS OS
1.Lift the scanner lid, and place the pictures face down on the glass, leaving space between the pictures.
2.Close the scanner lid.
3.Open Home Center Software, then select Printer Tools.
4.Under the Tools heading, select Printer Scan Settings, then select the Picture tab.
5.Select Automatically Detect Pictures, if it is not selected, then click OK.
6.Click the X in the
7.In the Home Center window, select Scan Documents and Pictures.
8.Make sure that Picture is selected and Collage - Combine all pictures is cleared, then follow the
NOTE: Click Help (? icon) for additional instructions.
Scanning multiple pictures when connected to a computer with MAC OS
To scan multiple pictures simultaneously, and save them as separate files:
1.Lift the scanner lid, and place the pictures face down on the glass, leaving space between the pictures.
2.Close the scanner lid.
3.Open Home Center Software, then select your printer.
4.Select the Tools tab.
5.Click Scan Application.
6.Select Color Picture or Black and White Picture.
7.Select Automatically detect multiple pictures, if it is not selected.
8.Click Preview or Scan All, then follow the
NOTE: Click Help (? icon) for additional instructions.
Scanning
Scanning from the Online Printer Management Tool
You can use an Internet browser to initiate a scan from the Online Printer Management Tool on a computer that is connected to the same network as the printer.
1.Open the Online Printer Management Tool in a browser (see Accessing the Online Printer Management Tool, page 15).
2.Select the Applications tab.
3.Select Applications > Webscan in the left pane.
4.Load the original (see Loading originals for scanning, page 68).
5.Select the type of scan you want.
a.Select Picture or Document.
b.Select Color or Black & White.
6.Click Preview to see what will be scanned.
??? If needed, click Clear to reposition the original.
7.When you are satisfied with the preview, click Scan. The scanned file will display in a new browser window.
8.In the new browser window, select File > Save As to save the file as a JPEG image on your computer.
9Faxing
Your printer can send and receive faxes in either
Before you begin faxing
Before you can send or receive faxes, you must connect your printer and set up the fax options.
Connecting the printer for faxing
Selecting the country/region
For the fax to work properly, the country or region selected on the printer must match your location. This setting determines how your faxes are sent and received.
1.Press 
.
2.Press 
to select Printer Settings, then press OK.
3.Press 
to select Country/Region, then press OK.
4.Press 
to select your country or region, then press OK.
Determining your telephone system type
The instructions for setting up your printer for faxing differ depending on the type of telephone service you have. Determine the type of telephone service you have, and connect your printer accordingly.
IMPORTANT: Use the phone cord that was provided with the printer. If you use any other phone cord, you may not be able to send or receive faxes successfully.
???Standard telephone service ??? telephone service that uses dedicated telephone wiring to transmit only phone signals
???Cable telephone service ??? telephone service that is delivered by a cable television service
???Digital Subscriber Line (DSL) ??? telephone service that uses the wires of a local telephone network to transmit digital data over cables
???Internet telephone service
Faxing
DSL filter
KODAK HERO 2.2
Connecting to Internet telephone service
If you have Internet telephone service, you should already have a cable modem/router connected to the cable outlet with a coaxial cable. You will also need an Analog Telephone Adapter (ATA) to connect your printer for faxing.
NOTE: Sometimes the cable modem/router has a
1.Connect an
2.Connect one end of the phone cord that came with the printer
Cable outlet
Analog Telephone 
Adapter (ATA)
Coaxial Cablemodem/router cable
(CAT 5 cable)
Faxing
Determining whether your phone line is dedicated or shared
To connect your printer for faxing correctly, you need to determine whether your phone line is shared or dedicated.
???A dedicated phone line is one that has only this printer and no other devices connected to it. If you have a dedicated line, connect your printer as described for your type of phone service (see Connecting to a Standard or Cable telephone service, page 75, Connecting to a Digital Subscriber Line (DSL), page 75, or Connecting to Internet telephone service
???A shared phone line is one that has several devices connected to it, such as a phone and/or answering machine as well as the printer. If you have a shared line, connect your printer in one of the following ways, based on the devices you have connected to the same phone line.
If you share the line with an answering machine or telephone:
1.Connect one end of the phone cord that came with the printer into the LINE IN phone port on the back of the printer.
2.Connect the other end of the phone cord into either a wall phone jack or a DSL filter, depending on the type of telephone service you use.
3.Connect one end of the phone cord for your answering machine into the EXT OUT phone port on the back of the printer.
4.Connect the other end of the phone cord into the answering machine or telephone.
NOTE: If you have an answering machine, set the number of rings to answer on the printer to a higher number than the rings to answer for the answering machine (see Rings to Answer in the table under Selecting fax settings, page 79).
Configuration for connecting an answering machine with a standard telephone service
Phone with answering machine
KODAK HERO 2.2
If you have an answering service:
If you have an answering service that uses a computerized system for recording messages remotely for the same phone line that you use for your
page 79).
If you do not set up a distinctive ring, you can still receive faxes manually (see Receiving a fax manually, page 89).
Entering fax sender information
Fax sender information appears in the header of any fax that you send from your
NOTE: If you do not enter fax sender information, the header on faxes that you send will be blank.
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Fax Sender Information, then press OK.
4.Use the numeric keypad on the control panel to enter:
???your name or business name
???your fax number
???your phone number
See Using the numeric keypad on the control panel to enter text and/or numbers, page 84.
5.When you are finished entering information in a field, press 
to move to the next field.
6.Press OK to save the information.
Faxing
Selecting fax settings
Before sending or receiving faxes, set the fax settings.
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
or 
to select a setting, then press 
or 
to change the option.
KODAK HERO 2.2
Faxing
KODAK HERO 2.2
To adjust fax settings from the Online Printer Management Tool:
1.Open the Online Printer Management Tool in a browser (see Accessing the Online Printer Management Tool, page 15).
2.Select the Settings tab, then select Fax > Settings.
3.Change the Sender Information and/or fax Settings as needed.
4.Click Save to update the settings.
Setting the answer mode (auto answer or manual)
The default setting is for Auto Answer to be on. When Auto Answer is on, the printer picks up all incoming faxes automatically.
To answer calls manually, turn off Auto Answer. (See Receiving a fax manually, page 89.)
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Fax 
to select Off.
4.Press OK to save the setting.
Working with the phonebook
You can enter up to 60 fax numbers in the phonebook.
You can create and manage the phonebook from the printer LCD, or if connected to a computer with WINDOWS OS, you can use Home Center Software.
You can also use the Online Printer Management Tool to edit the Fax Phone Book. See Using the Online Printer Management Tool to edit the Fax Phone Book, page 85.
Faxing
Using symbols in phonebook entries
The following symbols are used in phonebook entries:
Adding a new phonebook entry
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press OK to select Fax Options.
4.Select Edit Phonebook, then press OK.
5.Press 
to select Add New Entry, then press OK.
6.Press 
to select Number, then press OK.
7.Use the numeric keypad on the control panel to enter a fax number, then press OK.
8.Select Name, then press OK.
9.Use the LCD keyboard to enter a name:
a.On the control panel, press 
, 
, 
or
to select the letters.
b.When you are finished, select DONE, then press OK.
10.Optional: Assign a Quick Dial number.
Set up your ten most frequently used fax numbers as Quick Dial numbers.
You will be able to dial them quickly, and they will be displayed at the top of your phonebook.
a.Press 
to select Quick Dial, then press OK.
b.Using the numeric keypad on the control panel, enter a number from 0 to 9, then press OK.
11.Press 
to select DONE, then press OK.
KODAK HERO 2.2
Editing a phonebook entry
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press OK to select Fax Options.
4.Select Edit Phonebook, then press OK.
5.Press 
to select Edit Entry, then press OK.
6.Press 
to select the entry you want to edit, then press OK.
7.Press 
to select the field you want to edit, then press OK.
8.Use the LCD keyboard and/or numeric keypad to make your change(s).
9.Press 
to select DONE, then press OK.
Deleting a phonebook entry
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press OK to select Fax Options.
4.Select Edit Phonebook, then press OK.
5.Press 
to select Delete Entry, then press OK.
6.Press 
to select the entry you want to delete, then press OK. NOTE: If you do not want to delete the entry, press 
.
7.To delete the entry, press OK.
The entry is deleted from the phonebook.
8.Repeat steps 4 ??? 5 to delete more entries; when you are finished, press 
.
Using the numeric keypad on the control panel to enter text and/or numbers
The number keys on the numeric keypad represent a number and several characters. For example, the number 2 key also represents the letters A, B, C and a, b, and c. You must press the 2 key multiple times to enter a corresponding letter. For example, to enter the letter ???B??? as the first letter of a name, press the 2 key two times; to enter the lowercase ???b??? at the beginning of a name, press the 2 key five times. If the lowercase ???b??? is not at the beginning of a name or word, press the 2 key two times.
If you need to use the same key for more than one letter in a row (for example, to type ???Cab???), you need to pause between letters. To type ???Cab???, press the 2 key three times to enter ???C???, then pause 3 to 4 seconds; press the 2 key once to enter ???a???, then pause 3 to 4 seconds; and press the 2 key two times to enter ???b???. You do not need to pause if the next letter is on a different key.
Note that the Symbols (*) key and the Space (#) key also cycle through several different symbols when you press the key multiple times.
To make a correction to your entry, press 
BKSP (navigation button) on the control panel to erase the rightmost character.
Faxing
Using the Online Printer Management Tool to edit the Fax Phone Book
1.Open the Online Printer Management Tool in a browser (see Accessing the Online Printer Management Tool, page 15).
2.Make changes to your fax phonebook (see Adjusting fax settings, page 18).
Preparing a fax for transmission
Before you send a fax, prepare a cover page (if needed), load the original(s), and change the resolution and brightness (if needed).
Printing a fax cover page
If you need a fax cover page, you can print one with your printer, then manually complete the information (person to whom you are sending, fax number, your name, etc).
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Cover Page, then press OK.
4.Load letter or A4 paper, then press 
.
Loading originals for faxing
To fax documents (up to 35 pages) that are on plain paper, load the original(s) face up in the automatic document feeder (ADF).
IMPORTANT: The ADF accepts plain paper originals from 6.9 to 8.5 in. (18 to 22 cm) wide and 9.8 to 11.7 in. (25 to 30 cm) long.
To fax a photo, documents on thick or thin paper, or a document that is too small or too large to fit in the ADF, place the original face down on the scanner glass. You can fax only one page at a time from the scanner glass.
For more information on loading originals, see Loading originals, page 40.
KODAK HERO 2.2
Changing resolution and brightness
Before sending your fax, change the resolution and brightness settings, as needed, based on your original.
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Select Fax Options, then press OK.
4.Press 
to select Resolution.
The resolution setting determines the amount of detail that is transmitted. Select:
???Standard (default) for most documents
???Fine for documents with fine print
???Photo for photographs
5.Press 
to select Color or Black & White.
6.Press 
to select Brightness.
Adjust the brightness setting according to how light or dark your original is. Select:
???Normal (default) for most documents
???+1 to +3 to lighten dark originals
???
NOTE: If you do not want to save these settings, send your fax. The settings will apply only to the current transmission. If you want to save these settings as defaults:
a.Press 
to select Save as Defaults, then press OK.
b.Select Yes, then press OK.
Faxing
Sending a fax
You can send your fax in several ways. You can use:
???the phonebook
???Quick Dial
???the numeric keypad
???the Redial button
Using the phonebook to send a fax
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press 
to select the desired number.
4.Press 
.
NOTE: If the receiver's fax machine is not set up to print color, the fax will print in
Using Quick Dial to send a fax
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press the number on the keypad that corresponds to the desired Quick Dial entry.
4.Press 
.
NOTE: If the receiver's fax machine is not set up to print color, the fax will print in
Using the numeric keypad to send a fax
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Enter a fax number using the numeric keypad.
4.Press 
.
NOTE: If the receiver's fax machine is not set up to print color, the fax will print in
KODAK HERO 2.2
Dialing a recently faxed number
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press 
to select Recent, then press OK.
4.Select the fax number, then press OK.
5.Press 
.
If there is no number to redial, press OK. The phonebook opens.
Sending a fax from your computer
To send a fax from your computer, you must have Home Center Software installed on your computer.
Sending a fax from a computer running WINDOWS OS:
1.Open the document you want to fax, then select File > Print.
2.In the print dialog box, make sure that KODAK HERO 2.2 AiO Fax is selected, then click Properties or Preferences.
3.Select a paper size (letter or A4) from the
4.Enter the fax number in the Enter Fax Number field, then click OK.
5.Click OK to send the fax.
Sending a fax from a computer running MAC OS:
1.Open the document you want to fax, then select File > Print.
2.Expand the print dialog box, if necessary.
3.Select Fax Options from the
4.Select a paper size (US Letter or A4 only) from the
5.Check the Send as Fax check box, then enter the fax number in the To field.
6.Select a fax quality (Standard or Best).
7.Click Print to send the fax.
Faxing
Receiving a fax
You can set up your printer to receive faxes automatically or manually. Even if your printer is set up to receive faxes automatically, you can still receive them manually at any time.
Receiving a fax automatically
1.Load letter (8.5 x 11 in. / 22 x 28 cm) or A4 (8.3 x 11.7 in. / 21 x 30 cm) plain paper into the paper tray (see Loading plain paper, page 37).
2.Make sure Fax
The printer will receive all incoming faxes automatically.
IMPORTANT: Whenever there is an incoming fax, the printer LCD shows the message, ???Incoming Call. Press START to Answer.??? If the Auto Answer LED is on, you do not need to press START to receive the fax. The printer will automatically receive the fax after the number of rings that you selected for the fax settings (see Rings to Answer in the table under Selecting fax settings, page 79). However, you may choose to receive the fax sooner by pressing either START button. (Whether the fax is color or
Receiving a fax manually
If Auto Answer is turned off for your printer, you can receive incoming faxes manually.
NOTE: You can receive any incoming fax manually, even if Auto Answer is turned on.
To receive a fax manually:
??? When you hear the phone ring, press 
.
If your printer is connected to the same phone line as another telephone and you are using tone dialing (see Dialing Mode near the bottom of the table under Selecting fax settings, page 79), you may receive an incoming fax manually from another phone. When you hear the distinctive ring of your fax line or know that the incoming call is a fax:
??? Pick up any phone and dial 234 (the remote access code).
Printing fax reports
You can set up the printer to print certain reports automatically. You can also print reports manually at any time.
KODAK HERO 2.2
Fax settings report
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Settings, then press OK.
4.Load letter (8.5 x 11 in. / 22 x 28 cm) or A4 (8.3 x 11.7 in. / 21 x 30 cm) plain paper, then press 
.
Fax confirmation page
The Fax Confirmation Page contains the time and date of transmission, the number that you called and the number you called from, and whether the transmission was successful. To print the Fax Confirmation Page, you must select the option to print it before you transmit the fax. The default setting is to never print the Fax Confirmation Page.
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Conf. Page.
4.Press 
or 
to select Always (to print a confirmation page after sending every fax) or After Fail Only to print only if the fax transmission fails.
5.Press OK.
NOTE: The name and fax number of receivers will not appear on your confirmation page if the receivers have not set up that information on their fax machines.
Fax activity log
The Fax Activity Log provides detailed information for approximately the last 30 faxes sent or received. The log contains information such as date, time, duration of transmission, to/from, and number of pages.
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Activity Log, then press OK.
4.Load letter (8.5 x 11 in. / 22 x 28 cm) or A4 (8.3 x 11.7 in. / 21 x 30 cm) plain paper, then press 
.
NOTE: The name and fax number of receivers will not appear on your Fax Activity Log if the receivers have not set up that information on their fax machines.
Canceling a fax
You can cancel a fax that you are sending or receiving at any time.
To cancel sending or receiving a fax, press 
.
10 Maintaining Your Printer
Your printer requires little maintenance. However, Kodak recommends cleaning the scanner glass and lid regularly to remove dust and fingerprints, which affect the quality and accuracy of scanning.
Except while cleaning the printer, keep the printer plugged into an AC power outlet. If you use a power strip, don't turn off the power strip. (The printer does not need to be turned on but should be plugged in.)
Keep the printhead and ink cartridges in the printer at all times to help prevent damage to the printhead.
For recycling and/or disposal information, contact your local authorities. In the US, go to the Electronics Industry Alliance at www.eia.org or go to www.kodak.com/go/recycle.
General care and cleaning
CAUTION:
Always disconnect the power to the printer before cleaning it. Do not use harsh or abrasive cleaners on any part of the printer.
???To clean the printer, wipe the outside with a clean, dry cloth.
???Keep the surrounding area vacuumed and
???Protect the printer from tobacco smoke, dust, and liquid spills.
???Do not place objects on the printer.
???Keep the input tray free of dust, dirt, and other foreign objects.
???Keep the printer supplies away from direct sunlight and out of
???Do not allow chemicals to come into contact with the printer.
KODAK HERO 2.2
Cleaning the scanner glass and document backing
The scanner glass can get smudged and minor debris can accumulate on the white document backing under the scanner lid. Periodically clean the scanner glass and document backing.
CAUTION:
Do not use harsh or abrasive cleaners on any part of the printer. Do not spray liquid directly on the glass.
Do not use
To clean the scanner glass and document backing under the scanner lid:
1.Turn off the printer and unplug it from the power outlet.
2.Lift the scanner lid.
document backing
scanner glass
3.Wipe the glass with a soft cloth or sponge, slightly moistened with a nonabrasive glass cleaner.
Maintaining Your Printer
4.Dry the glass with a
5.Gently clean the document backing with a soft cloth or sponge, slightly moistened with mild soap and warm water.
6.Dry the document backing with a chamois or soft,
NOTE: If the document backing needs further cleaning, use isopropyl (rubbing) alcohol on a soft cloth, then wipe thoroughly with a cloth moistened with water to remove any residual alcohol.
7.When you finish cleaning, plug in the printer.
KODAK HERO 2.2
Replacing ink cartridges
Your printer uses black and color ink cartridges. You can check the approximate ink levels on the LCD (see Checking ink levels, page 103) or in Home Center Software. When an ink cartridge is out of ink, the printer LCD displays a message stating that the black or color ink cartridge needs replacing.
IMPORTANT: Do not use
Click to view a video that demonstrates replacing the ink cartridges.
To replace an ink cartridge:
1.Make sure the printer is on.
2.Lift the access door, and wait for the carriage to move to the access position.
The ink cartridges are located in the printhead.
Maintaining Your Printer
3. Pinch the tab on the ink cartridge.
4. Lift the ink cartridge out of the printhead.
5. Remove the new ink cartridge from its bag.
IMPORTANT: To prevent the printhead from drying out, insert the ink cartridge into the printhead immediately.
KODAK HERO 2.2
6. Remove the cap.
7. Insert the ink cartridge into the printhead.
8. Press down on the ink cartridge tab until you hear a click.
9. Close the access door.
Maintaining Your Printer
Replacing the printhead
IMPORTANT: Replacing the printhead is not a regular maintenance procedure. Replace the printhead only if you receive a new printhead from Kodak.
Click to view a video that demonstrates replacing the printhead.
To replace the printhead:
1.Make sure the printer is on.
2.Lift the access door, and wait for the carriage to move to the access position.
3. Remove both ink cartridges and set them aside.
KODAK HERO 2.2
4. Unlatch the existing printhead by lifting the button.
5. Lift the printhead out of the carriage.
6. Remove the new printhead from its bag.
Maintaining Your Printer
7. Remove the cap.
8. Install the new printhead in the carriage.
9. Push firmly against the target label of the printhead until you hear a click.
KODAK HERO 2.2
10. Insert the black ink cartridge into the printhead.
11. Press down on the ink cartridge until you hear a click.
12. Repeat steps 10 - 11 for the color ink cartridge.
13.Close the access door.
The printer detects the new printhead. Follow the instructions on the LCD to calibrate your printer.
Maintaining Your Printer
Updating the software and printer firmware
Using the latest software and firmware helps ensure optimal performance of your printer.
NOTE: Firmware is the software that runs on the printer.
Although there is a an automatic check for software and firmware updates when your computer is connected to the Internet, you can update manually using the following procedure.
Updating if your printer is connected to a computer with WINDOWS OS
To update the software:
1.Make sure that your computer is connected to the Internet.
2.Open Home Center Software, then select Printer Tools.
NOTE: If you do not have Home Center Software, select Start > All Programs > Kodak > KODAK AiO Printer Tools.
3.Under Printer Resources, click Check for Software Updates to check whether software updates are available.
4.If there are updates, click Next and follow the
To update the printer firmware:
1.Make sure that your computer is connected to the Internet.
2.Connect the printer to the computer with a USB cable, Ethernet cable, or wirelessly (if not currently connected).
3.Open Home Center Software, then select Printer Tools.
NOTE: If you do not have Home Center Software, select Start > All Programs > Kodak > KODAK AiO Printer Tools.
4.Make sure that KODAK HERO 2.2 AiO - Connected (or a similar name with ???Connected???) appears in the lower left corner of the Printer Tools window.
NOTE: If KODAK HERO 2.2 AiO - Connected does not appear in the lower left corner, click Select, then click Refresh List and choose your printer from the list; click OK and follow the
5.Under Printer Resources, select Check for Printer (Firmware) Updates.
6.If there are updates, click Next and follow the
IMPORTANT: Do not turn off or unplug your printer or your computer during the update. Doing so may cause the printer to become inoperable. If the printer is connected wirelessly, make sure you have a stable connection when you perform the update. During the upgrade, your printer will restart. Wait for the message, ???Update complete! You may now use your Kodak Printer??? to appear on your computer.
KODAK HERO 2.2
Updating if your printer is connected to a computer with MAC OS
To update the software:
1.Make sure that your computer is connected to the Internet.
2.Open Home Center Software.
3.Select the Tools tab.
4.Click Check for Software Updates.
5.If there are software updates, follow the
To update the firmware:
1.Make sure that your computer is connected to the Internet.
2.Connect the printer to the computer with a USB cable, Ethernet cable, or wirelessly (if not currently connected).
3.Open Home Center Software.
4.Select the Tools tab.
5.Click Check for Printer (Firmware) Updates.
6.If there are updates, follow the
IMPORTANT: Do not turn off or unplug your printer or your computer during the update. Doing so may cause the printer to become inoperable. Your printer will restart during the update.
Maintaining Your Printer
Monitoring and adjusting printer performance
From the control panel, you can perform tasks to help keep the printer functioning well.
Checking ink levels
1.Press 
.
2.Press 
to select Maintenance, then press OK.
3.With Check Ink Levels selected, press OK.
The LCD shows approximate levels of ink in the cartridges so you know when it???s time to order replacement cartridges. Use 30 Series ink cartridges.
NOTE: You can order ink cartridges online. Open Home Center Software and select Order Supplies or go to www.kodak.com/go/printingsupplies.
Resetting factory defaults
1.Press 
.
2.Press 
to select Printer Settings, then press OK.
3.Press 
to select Reset All Settings, then press OK.
4.When you see the message, ???This will reset printer settings to factory defaults,??? press OK.
NOTE: Resetting factory defaults does not change the date and time, language, or country/region.
11 Troubleshooting
Basic troubleshooting
If you experience an error with your printer, restarting your printer will sometimes fix the problem. Turn off your printer, wait five seconds, then turn on your printer.
Troubleshooting
KODAK HERO 2.2
Getting help on the Web
For more troubleshooting information:
Troubleshooting
Status lights
The status lights indicate the condition of the printer. There are two status lights on the printer: one that indicates power, the other indicates
Power status light
12 Product and Safety Specifications
The following specifications are subject to change without notice.
Features and Specifications
Print performance
Black print speed 8.5 ipm
Color print speed 5.8 ipm
Print technology
Print quality modes Draft, Normal, and Best on plain paper
Photo quality mode on photo paper
Photo printing features
Quantity 1 to 99
Print sizes 2 x 3 in. / 5 x 8 cm 3.5 x 5 in. / 9 x 13 cm 4 x 6 in. / 10 x 15 cm 4 x 7 in. / 10 x 18 cm 4 x 8 in. / 10 x 20 cm
4 x 12 in. / 10 x 30 cm (Panoramic) 5 x 7 in. / 13 x 18 cm
8 x 10 in. / 20 x 25 cm
US Letter (8.5 x 11 in. / 22 x 28 cm) A4 (8.3 x 11.7 in. / 21 x 30 cm)
Quality Best, Normal, Draft modes on plain paper
Photo quality mode on photo paper
Optimize image quality for KODAK Photo Papers with barcode
Image enhancement KODAK PERFECT TOUCH Technology with
Home Center Software (from the computer only)
Color
Scene balance On (default), Off
Product and Safety Specifications
Copy document features
Color
Quantity 1 to 99 copies
Copy sizes Same Size, Fit to Page, 20% to 500%
Plain paper quality Best, Normal, Draft
Brightness ??? 3 to + 3
Copy photo features
Scanning features
Scanner type Contact Image Sensor (CIS)
Scan sizes Maximum size of original scanned from scanner glass: 8.5 x 11.7 in. / 216 x 297 mm
Sizes of originals scanned from ADF:
B5 (6.9 x 9.8 in. / 18 x 25 cm)
US Executive (7.3 x 10.5 in. / 18 x 27 cm)
US Letter (8.5 x 11 in. / 22 x 28 cm)
A4 (8.3 x 11.7 in. / 21 x 30 cm)
Resolution and bit depth Supports native scan resolution of 1200 dpi
Scans at 8 bits per channel, with 3 color scans at 24 bits/pixel
Functions Segmentation scanning
Optical Character Recognition (OCR)
KODAK HERO 2.2
Input paper tray
Paper capacity 100 sheets of 20 lb plain paper
20 sheets of photo paper, up to 12 mil (290 gsm)
20 envelopes
Tray size 4 x 6 in. to 8.5 x 14 in. / 10 x 15 cm to 22 x 36 cm
Output paper tray
Paper capacity 50 sheets of 20 lb plain paper
20 sheets of photo paper, up to 12 mil (290 gsm)
Automatic document feeder (ADF) for originals
Paper capacity 35 sheets of 20 lb plain paper
Paper size limitations 6.9 to 8.5 in. wide / 18 to 22 cm wide 9.8 to 11.7 in. long / 25 to 30 cm long
Fax system
Paper types supported
Product and Safety Specifications
Paper sizes supported
Plain paper A4 (8.3 x 11.7 in. / 21 x 30 cm)
A5 (5.8 x 8.3 in. / 15 x 21 cm)
A6 (4.1 x 5.8 in. / 11 x 15 cm)
B5 (6.9 x 9.8 in. / 18 x 25 cm)
US Executive (7.3 x 10.5 in. / 18 x 27 cm)
US Letter (8.5 x 11 in. / 22 x 28 cm)
US Legal (8.5 x 14 in. / 22 x 36 cm)
Custom sizes from
Labels A4 (8.3 x 11.7 in. / 21 x 30 cm)
US Letter (8.5 x 11 in. / 22 x 28 cm)
Index card stock 4 x 6 in. index cards (10 x 15 cm) 5 x 7 in. index cards (13 x 18 cm)
US Letter (8.5 x 11 in.) (22 x 28 cm)
Envelopes C5 (6.4 x 9 in. / 16 x 23 cm)
C6 (4.5 x 6.4 in. / 11 x 16 cm)
DL (designated long) (4.3 x 8.7 in. / 11 x 22 cm)
US #10 (4.1 x 9.5 in / 11 x 24 cm)
US #7?? (3.9 x 7.5 in. / 10 x 19 cm)
US #9 (3.9 x 8.9 in. / 10 x 23 cm)
Photos 4 x 6 in. / 10 x 15 cm 4 x 7 in. / 10 x 18 cm 4 x 8 in. / 10 x 20 cm 4 x 12 in. / 10 x 31 cm 5 x 7 in. / 13 x 18 cm 7 x 10 in. / 18 x 25 cm 8 x 10 in. / 20 x 25 cm
US Letter (8.5 x 11 in. / 22 x 28 cm)
A4 (8.3 x 11.7 in. / 21 x 30 cm)
Ink cartridges
Ink handling
Ink life
KODAK HERO 2.2
Connectivity
Protocols supported USB 2.0 High Speed; DPOF
Devices supported Computers with WINDOWS OS and computers with MAC OS; memory cards (SD, XD, MS/Duo, MMC, SDHC); iPhone (iOS 3.0 or later), iPod Touch (2nd generation or later), iPad; most
Image formats supported Image printing supports JPEG (EXIF v2.21
Number of USB ports One USB 2.0
Software support
Application support
Media support Plain paper, photo paper, envelopes, greeting cards, card stock, and labels
Scanner support TWAIN and WIA, WIA2 (VISTA OS and WINDOWS 7), ICA (MAC OS) and TWAIN (on MAC OS 10.5), including segmentation scanning
Update support Software and firmware updates available through Web support
Physical specifications
Power
Storage dimensions
Operating dimensions
Weight
Operating range
Full image quality environmental range
Input:
Manufacturer and model:
Asia Power Devices Inc., model
462 mm (18.9 in.) long x 432 mm (17.0 in.) wide x 260 mm (10.2 in.) high with input and output trays closed
477 mm (19.5 in.) long x 557 mm (21.9 in.) wide x 260 mm (10.2 in.) high with input and output trays fully extended for operation
6.9 kg (15.2 lb) without power supply, printhead, or ink cartridges
5?? to 35??C (41?? to 95??F), 15 to 85% RH
15?? to 30??C (59?? to 86??F), and 20 to 80% RH
Product and Safety Specifications
Energy efficiency ENERGY STAR?? Qualified
Warranty
Product One year from purchase (with proof of purchase)
Printhead One year from purchase (with proof of purchase)
System requirements
Computer with WINDOWS OS
Computer with MAC OS
KODAK HERO 2.2
Safety information
KODAK HERO 2.2
???Always follow all warnings and instructions marked on the product.
???Use only the power source indicated on the product regulatory label.
???Use only the power cord that comes with the product (or an approved power cord greater than or equal to
???If you do not use this product for a long period of time, unplug it from the electrical outlet.
???Always turn this product off by using the On/Off button. Wait until the On/Off button stops flashing before removing the power plug from the outlet.
???Do not allow the power cord to become damaged or frayed.
???If you need to use an extension cord with this product, make sure that the ampere rating of the product does not exceed the ampere rating of the extension cord.
???Place the product on a flat, stable surface that extends beyond the product???s base in all directions. This product will not operate properly if tilted or at an angle.
???When storing or transporting this product, do not tilt or stand it on its side. Never turn this product upside down (ink can leak out of the product).
???Avoid placing this product in an environment that is subject to rapid changes in temperature or humidity, mechanical shocks, vibration, or dust. Do not place near radiators, heating vents, or in direct sunlight.
???Leave enough room around this product for sufficient ventilation.
???Do not block this product???s covers or openings, or insert any objects through slots.
???Do not use aerosol products inside or around this product.
???Do not spill any liquid on this product.
???Do not attempt to repair or service this product.
???If the power cord or plug is damaged, if any liquid has been spilled onto the product, if the product has been dropped or the case damaged, if the product does not operate normally or exhibits a major change in performance level, unplug this product and contact Kodak at www.kodak.com/go/contact.
For Service Personnel:
CAUTION:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to local instructions.
Product and Safety Specifications
LCD screen safety
???Use only a dry, soft cloth to clean the LCD screen. Do not use any liquid or chemical cleaners.
???If the LCD screen is damaged, contact Kodak immediately. If any of the solution from the display gets on your hands, wash them thoroughly with soap and water.
Ink cartridge safety
???Keep all ink cartridges out of the reach of children.
???If ink gets on your skin, wash with soap and water. If ink gets into your eyes, flush immediately with water. If any discomfort or change in vision persists after washing, seek medical attention immediately.
???For MSDS information on inks, go to www.kodak.com/go/MSDS. NOTE: You will need the catalog number from the ink package.
KODAK HERO 2.2
Regulatory compliance
FCC statement
The United States Federal Communications Commission (in CFR 47 Part 15.105) has specified that the following notice be brought to the attention of the users of this product:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
???Reorient or relocate the receiving antenna.
???Increase the separation between the equipment and receiver
???Connect the product into an outlet on a circuit different from that to which the receiver is connected.
???Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this product not expressly approved by Eastman Kodak Company might cause harmful interference and void the FCC authorization to operate this product.
The radiated energy from this product is well below the FCC radio frequency exposure limits. Nevertheless, the product shall be used in such a manner that the potential for human contact during normal operation is minimized. This product and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC exposure limits, human proximity shall not be less than 20 cm (8 inches) during normal operation.
Product and Safety Specifications
Canadian statements
This product meets the applicable Industry Canada technical specifications.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian
Industry Canada (IC) Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your person.
European compliance statement
Hereby, Eastman Kodak Company declares that this KODAK
German compliance statement
CAUTION:
This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view.
CAUTION:
Das Ger??t ist nicht f??r die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um st??rende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren Gesichtsfeld platziert verden.
Noise emissions for this equipment do not exceed 70 dB(A).
This equipment is not intended for use in the work place in accordance with
BildscharbV regulations.
Das Ger??t ist nicht f??r die Benutzung am Bildschirmarbeitsplatz gem???? BildscharbV vorgesehen.
KODAK HERO 2.2
REACH Article 33 declarations
Go to www.kodak.com/go/REACH for information about the presence of substances included on the candidate list according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).
Power supply information
Certified External Power Supply that can be used with this product: Hipro
Waste electrical and electronic equipment labeling
In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.
ENERGY STAR?? Qualified
To conserve energy, this printer will enter a reduced power (sleep) mode automatically after 1 hour. You can adjust the delay time (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.
VORSICHT:
ENERGY STAR and the ENERGY STAR mark are registered U.S. service marks. As an ENERGY STAR partner, Kodak has determined that this product meets ENERGY STAR Guidelines for energy efficiency. For more information on the ENERGY STAR program, see www.energystar.gov.
Product and Safety Specifications
Warranty Information
Limited Warranty
Kodak warrants Kodak consumer electronic products and accessories (???Products???), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Limited Warranty Coverage
Warranty service is only available from within the country where the Products were originally purchased. You may be required to send Products, at your expense, to the authorized service facility for the country where the Products were purchased.
Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under this warranty. If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak???s control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak???s operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. KODAK MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY
FOR THIS PRODUCT, AND DISCLAIMS THE IMPLIED WARRANTIES AND
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak???s only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services or claims of your customers for such damages resulting from the purchase, use or failure of the Product), regardless of cause, or for breach of any written or implied warranty is expressly disclaimed.
KODAK HERO 2.2
Your Rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction. Your statutory rights are not affected.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Declaration of Conformity