3-prong ground-type outlet should be located on left hand side of cutout 8" (20.3 cm) max. from enclosure sidewall.

Note: Solid side and bottom of cutout enclosure not shown.

Gas supply line should be located in this area on rear or side walls, or the supply line can come up through the floor.

Gas and Electric

Connection Locations

7-1/4"

(18.4 cm)

E

CORNER NOTCH

DETAIL

Note: Dimension "B" can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is protected by not less than 0.25" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel,0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

C

E

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.