?? Ice Maker
PRODUCT MODEL NUMBERS
KUIA18NNJ KUIS18NNJ
KUIA18PNL KUIS18PNJ
KUIV18NNM
Electrical:
Water: A cold water supply using 1/4 in. O.D. soft copper tubing with shutoff valve.
Drain: Either a
CABINET OPENING DIMENSIONS
A. Recommended location for electrical and plumbing fixtures.
B. Floor level
B
24" (60.1 cm)
18" (45.7 cm)
DRAIN REQUIREMENTS
1?????????"
(1.9 cm)
20" (50.80 cm)
Drain lines must have a minimum of 5???8 in. (15.88 mm) inside diameter.
Drain lines must have a 1 in. drop per 48 in. (2.54 cm drop per 122 cm) of run or 1???4 in. drop per 12 in. (6.35 mm per 30.48 cm) and must not have low points where water can settle.
The ideal installation has a
You must maintain a 1 in. (2.54 cm) air gap between the drain pump hose and the standpipe.
DD. Center of drain should be 20 in. (50.80 cm) from front of door.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.