Quick Start Guide

AboutThe Quick Start Guide

This Quick Start Guide explains the basic functions of this unit. For functions not covered in this guide, refer to the Instruction Manual (PDF file) contained in the included CD- ROM ???Instruction Manual???.

To refer to the Instruction Manual contained in the CD-ROM, a PC loaded with Microsoft?? Windows XP/ Vista/7 or Mac OS X?? 10.4 or later

is required in addition to Adobe?? Reader??? 7.1 or Adobe?? Acrobat?? 7.1 or later.

The Instruction Manual is subject to change for modification of specifications and so forth. You can download the latest version of the Instruction Manual from http://

manual.kenwood.com/edition/ im345.

NOTE

???The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.

???In this manual, each model name is abbreviated as follows.

DNX7190HD and DNX7490BT:

DNX6990HD, DNX6190HD, and

DNX6490BT:

DNX5190 and DNX5060EX:

If above icons are showed, read the article applicable to the unit you use.

???In operation procedures, bracket shape indicates the key or button you should

control.

<>: indicates the name of panel buttons.

[ ]: indicates the name of touch keys.

Contents

Precautions

2WARNING

To prevent injury or fire, take the following precautions:

???To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

???Do not watch or fix your eyes on the unit???s display when you are driving for any extended period.

???If you experience problems during installation, consult your Kenwood dealer.

Precautions on using this unit

???When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.

???You can select language to display menus, audio file tags, etc. See Language setup (P.80) in the Instruction Manual.

???The Radio Data System or Radio Broadcast Data System feature won???t work where the service is not supported by any broadcasting station.

Precautions on battery

???Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed contact physician immediately.

???Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.

???Do not set the remote control in hot places such as on the dashboard.

???Danger of explosion if Lithium battery is incorrectly replaced. Replace only with the same or equivalent type.

Lens fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

Precautions on handling discs

???Do not touch the recording surface of the disc.

???Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

???Do not use disc type accessories.

???Clean from the center of the disc and move outward.

???When removing discs from this unit, pull them out horizontally.

???If the disc center hole or outside rim has burrs, use the disc only after removing the burrs with a ballpoint pen etc.

???Discs that are not round cannot be used.

???8-cm (3 inch) discs cannot be used.

???Discs with coloring on the recording surface or discs that are dirty cannot be used.

???This unit can only play the CDs with

.

This unit may not correctly play discs which do not have the mark.

???You cannot play a disc that has not been finalized. (For the finalization process see your writing software, and your recorder instruction manual.)

Quick Start Guide

Acquiring GPS signal

The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle

is outdoors in an open area away from tall buildings and trees for fastest acquisition.

After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.

About the front panel

When removing the product from the box or installing it, the front panel may be positioned at the angle shown in (Fig. 1). This is due to the characteristics of mechanism the product is equipped with.

When the product is first powered on works properly, the front panel will automatically move into the position (initial setting angle) shown in (Fig. 2).

How To Reset Your Unit

If the unit or the connected unit fails to operate properly, reset the unit.

1 Press the <Reset> button.

The unit returns to factory settings.

Cleaning The Unit

If the faceplate of this unit is stained, wipe it with a dry soft cloth such

as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.

???Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print.

NOTE

???Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device connected can damage the data stored in the USB device. For how to disconnect the USB device, see

How To Play Music (P.16).

???When the unit is turned on after resetting, the Initial SETUP screen appears. See First Step (P.6).

Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual.

2WARNINGS

Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury.

When navigating, carefully compare information displayed on the navigation system to all available navigation sources, including information from street signs, visual sightings, and maps. For safety, always resolve any discrepancies or questions before continuing navigation.

Always operate the vehicle in a safe manner.

Do not become distracted by the navigation system while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the screen of the navigation system while driving, and use voice prompts when possible.

Do not enter destinations, change settings, or access any functions requiring prolonged use of the navigation system controls while driving. Stop your vehicle in a safe and legal manner before attempting such operations.

Keep the system volume at a low enough level to be able to hear outside noises while driving. If you can no longer hear outside noises, you may be unable to react adequately to the traffic situation. This may cause accidents.

The navigation system will not display the correct current position of the vehicle the first time it is used after purchase, or if the vehicle battery is disconnected. GPS satellite signals will soon be received, however, and the correct position will be displayed.

Be careful of the ambient temperature. Using the navigation system at extreme temperatures can lead to malfunction or damage. Also note that the unit can be damaged by strong vibration, by metal objects, or by water getting inside the unit.

2CAUTIONS

Failure to avoid the following potentially hazardous situations may result in injury or property damage.

The navigation system is designed to provide you with route suggestions. It does not reflect road closures or road conditions, weather conditions, or other factors that may affect safety or timing while driving.

Use the navigation system only as a navigational aid. Do not attempt to use the navigation system for any purpose requiring precise measurement of direction, distance, location, or topography.

The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The government system is subject to changes that could affect the accuracy and performance of all GPS equipment, including the navigation system. Although the navigation system is a precision navigation device, any navigation device can be misused or misinterpreted and, therefore, become unsafe.

IMPORTANT INFORMATION

Vehicle Battery Preservation

This navigation system can be used when the ignition key is turned to ON or ACC. To preserve the battery, however, it should be used with the engine running whenever possible. Using the navigation system for a long time with the engine switched off can cause the battery to run down.

Map Data Information

One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify

in product literature and copyright messages displayed to the consumer. Virtually all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive.

The unit is turned on.

???To turn off the unit:

Press the <MENU> button for 1 second.

Press the <MENU> button.

The unit is turned on.

???To turn off the unit:

Press the <MENU> button for 1 second.

The ???Initial setup??? is only necessary when you use the unit for the first time after purchase, and when you reset the unit.

Language

Select the language used for the control screen and setting items. Default is ???American English (en)???.

After setting, touch [Enter].

Angle

Adjust the position of the monitor. Default is ???0???.

After setting, touch [ ].

iPod AV Interface Use

Set the terminal which your iPod is connected to. Default is ???iPod???.

Color

Set the screen and button illumination color. You can select whether to perform color scan and adjust scanning color.

After setting, touch [ ].

EXT SW

Control the external devices.

After setting, touch [ ].

Camera

Set the parameters for the camera.

After setting, touch [ ].

OEM SETUP

This function requires a commercial adaptor. Consult your Kenwood dealer for details.

How To Insert An SD Card

1)Press 8 <0> button for 1 second.

The panel fully opens.

2)Hold the SD card as the diagram in the right and insert it into the slot until it clicks.

???To eject the card:

Push the card until it clicks and then remove your finger from the card.

The card pops up so that you can pull it out with your fingers.

Labelled side

0

Common Operations

General

There are some functions which can be operated from most screens.

List screen

There are some common function keys in the list screens of most sources.

[Menu]

Returns to the Top Menu screen.

(RETURN)

Returns to previous screen.

(common menu key)

Touch to display the common menu. The contents of the menu are as follows.

:Displays the EXT SW Control screen.

: Displays the SETUP Menu screen.

: Displays the Audio Control Menu screen.

: Displays the control screen of current source. Icon feature differs depending on the source.

: Closes the menu.

(Scroll)

Scrolls the displayed text.

etc.

Touch keys with various functions are displayed here.

Displayed keys differ depending on the current audio source, status, etc.

For examples, see List screen (P.16) in the Instruction Manual.

1

2

Press the <NAV> button to display the navigation screen.

Operate the desired function from the Main Menu screen.

???Finding points of interest

1)Touch [Where To?].

2)Touch [Points of Interest].

3)Select a category and a subcategory.

4)Select a destination.

5)Touch [Go!].

NOTE

???To enter letters contained in the name, touch [Where To?] - [Points of Interest] - [Spell Name].

???To search for a location in a different area, touch [Where To?] and then touch [Near].

Quick Start Guide

Installation Procedure

Before Installation

Before installation of this unit, please note the following precautions.

WARNINGS

???If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.

???Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.

CAUTION

???Install this unit in the console of your vehicle.

Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.

NOTES

???Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals.

???Make sure to ground the unit to a negative 12V DC power supply.

???Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

???Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

???If the power is not turned ON (???PROTECT??? is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked.

???If your car???s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained.

???If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening.

???If the fuse blows, first make sure the wires aren???t touching to cause a short circuit, then replace the old fuse with one with the same rating.

???Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.

???Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you

share thewires or ground them to any metal part in the car.

???When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For

example, if you connect theconnector of the left speaker to a front output terminal,

do not connect theconnector to a rear output terminal.

???After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

???Mount the unit so that the mounting angle is 30?? or less.

???This unit has the cooling fan (P.27) to decrease the internal temperature. Do not mount the unit in a place where the cooling fan of the unit are blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction.

???Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result.

???Reception may drop if there are metal objects near the Bluetooth antenna.

Bluetooth antenna unit

Installation Procedure

Supplied accessories

First of all, make sure that all accessories are supplied with the unit.

Unit

1To prevent a short circuit, remove the key from the ignition and

disconnect theterminal of the battery.

2Make the proper input and output wire connections for each unit.

3Connect the speaker wires of the wiring harness.

4Connect the wiring harness wires in the following order;

ground, battery, ignition.

5Connect the wiring harness connector to the unit.

6Install the unit in your car.

7Reconnect theterminal of the battery.

8Press the <Reset> button.

(P.4)

9Perform the Initial Setup. See First Step (P.6).

???Non-Japanese cars

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

Continued

Quick Start Guide

??? Toyota, Nissan or Mitsubishi car

6(M5x6mm) or

7(M5x7mm)

Car Bracket

6(M5x6mm) or

7(M5x7mm)

NOTE

???Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).

Escutcheon

Attach accessory 8 to the unit.

8

???General Motors cars

1)Cut out accessory 4 to meet the shape of the opening of the center console.

2)Attach accessory 4 to the unit.

Cut out to meet the shape of the opening in the vehicle.

4

???Toyota/Scion cars

1)Cut out accessory 4as illustrated.

Cutting line

4

2)Fold double-sided adhesive (accessory 5) along the slit and attach it to accessory 4 cut-out against the center rib as illustrated. Use 2 pieces of accessory 5 for 1 accessory 4 cut-out.

3)Attach accessory 4 cut-out to the unit.

5

GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals.

To mount the GPS antenna inside your vehicle:

1)Clean your dashboard or other surface.

2)Peel the backing off of the adhesive on the bottom of the metal plate (accessory 0).

3)Press the metal plate (accessory 0) down firmly on your dashboard or other mounting surface. You can bend the metal plate (accessory 0) to conform to a curved surface, if necessary.

4)Place the GPS antenna (accessory 9) on top of the metal plate (accessory 0).

9

1)Check the installation position of the microphone (accessory -).

2)Remove oil and other dirt from the installation surface.

3)Install the microphone.

4)Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method.

-

Fix a cable with a commercial item of tape.

???Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation.

???The GPS antenna should be installed at a position that is spaced at least 12 inch (30 cm) from cellular phone or other transmitting antennas. Signals from the GPS satellite may be interfered with by these types of communication.

???Painting the GPS antenna with (metallic) paint may cause a drop in performance.

Peel the release coated paper of double-face adhesive tape to fix on the place shown above.

Adjust the direction of the microphone to the driver.

Continued

Quick Start Guide

NOTE

???Install the microphone as far as possible from the cell-phone.

Removing Procedure

Removing the hard rubber frame (escutcheon)

1)Engage the catch pins on the removal tool (accessory3) and remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

Removing the unit

1)Remove the hard rubber frame by referring to step 1 in ???Removing the hard rubber frame???.

2)Insert the two removal tools (accessory3) deeply into the slots on each side, as shown.

3

3

Lock

NOTE

Catch

3)Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.

???The frame can be removed from the top side in the same manner.

2)When the lower level is removed, remove the upper two locations.

NOTE

???Be careful to avoid injury from the catch pins on the removal tool.

4)Pull the unit all the way out with your hands, being careful not to drop it.

Connecting wires to terminals (1)

Accessory - Accessory 9

Connect to the vehicle???s parking brake detection switch harness.

Accessory 1

Light Green (Parking sensor wire)

PRK SW

For best safety, be sure to connect the parking sensor.

Speaker impedance: 4-8 ??

White/Black

+ To front left speaker

White

Gray/Black

+ To front right speaker

Gray

Purple/White (Reverse sensor wire)

REVERSE

Connect to vehicle???s reverse lamp harness when using the optional rear view camera.

FM/AM antenna input

Green/Black

+ To rear left speaker

Green

Purple/Black

+ To rear right speaker

Purple

Battery

To steering remote

To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car.

To car light control switch

Connect to the terminal that is grounded when either the telephone rings or during conversation. To use the Mute feature, you need to hook up this wire to your telephone by using a commercial telephone accessory.

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. (Max. 300mA, 12V)

When using the optional power amplifier, connect to its power control terminal.

If no connections are made,

do not let the cable come out from the tab.

Light Blue/Yellow

(Steering remote control wire)

Orange/White (Dimmer control wire)

ILLUMI

Brown (Mute control wire)

MUTE

Blue

(Antenna control wire)

ANT. CONT

Blue/White

(Power control wire)

P. CONT

Refer to

the box2 below iPod/ AV-IN2 (CA-C3AV; Optional Accessory)

input

Accessory 2

Refer to

the box2 below

AV input (CA-C3AV;

Optional accessory)

Accessory 1

To Camera control terminal

Green/Red

Green/White

Blue/Red

To Relay Box

1

2

Rear View Camera Input

- Yellow (Visual Input)

Audio/Visual Output

- Yellow (Visual Output)

- White (Audio Left Output)

- Red (Audio Right Output)

Rear Preout

- Red (Audio Right Output)

- White (Audio Left Output)

Front Preout

- Red (Audio Right Output)

- White (Audio Left Output)

Subwoofer Preout

- Red (Audio Right Output)

- White (Audio Left Output)

Use an RCA cable as shown in above diagram.

About This Unit

??????Copyrights

???The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

???The ???AAC??? logo is a trademark of Dolby Laboratories.

???iTunes is a trademark of Apple Inc.

??????Made for iPod??? and ???Made for iPhone??? mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

???iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

???Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved.

???PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.

???HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio??? and the HD, HD Radio, and ???Arc??? logos are proprietary trademarks of iBiquity Digital Corp.

??? is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.

???This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

???Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

???Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the

Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. ?? DTS, Inc. All Rights Reserved.

???Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

???Android is a trademark of Google Inc.

???BlackBerry??, RIM??, Research In Motion?? and related trademarks, names and logos are the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited.

???ABOUT DIVX VIDEO: DivX?? is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified?? device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.

???ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified?? device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

???DivX??, DivX Certified?? and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

???About PANDORA?? internet radio:

Requirements for listening to the PANDORA?? internet radio are as follows:

iPhone or iPod touch

???Use an Apple iPhone or iPod touch running under iOS3 or later.

???Search for ???Pandora??? in the Apple iTunes App Store to find and install the most current version of the Pandora?? application on your device.

???iPhone/ iPod touch connected to this unit with a KCA-iP102.

Android??? or BlackBerry??

???Download the Pandora application to your smartphone from Pandora site using it???s standard browser.

???Bluetooth must be built in and the following profiles must be supported.

-SPP (Serial Port Profile)

-A2DP (Advanced Audio Distribution Profile)

NOTE

???The PANDORA service is available only in the U.S.

???Because PANDORA?? internet radio is a third-party service, the specifications are subject to change wihtout prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

???Some PANDORA?? functionality cannot be operated from this unit.

???For issues using the PANDORA?? application, please contact Pandora at pandora-support@pandora.com

???PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.

Quick Start Guide

??????FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the equipment and receiver.

???Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

???Consult the dealer or an experienced radio/TV technician for help.

DNX7190HD/ DNX6990HD/ DNX6190HD/

DNX5190/ DNX5060EX:

2CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.

JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI,

HACHIOJI-SHI, TOKYO, JAPAN

THIS PRODUCT COMPLIES WITH DHHS

RULES 21 CFR SUBCHAPTER J IN EFFECT AT

DATE OF MANUFACTURE.

Location: Top plate

DNX7190HD/ DNX6990HD/ DNX6190HD/ DNX5190/ DNX5060EX:

??????IC (Industry Canada) Notice

Operation is subject to the following two conditions:

(1)This device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device.

The term ???IC: ??? before the certification/ registration number only signifies that the Industry Canada technical specification were met.

2CAUTION

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person???s body (excluding extremities: hands, wrists, feet and ankles).

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not Cause harmful interference.

DNX7190HD/ DNX6990HD/ DNX6190HD/ :

???Contains Transmitter Module

FCC ID : RKXFC6000S

???Contains Transmitter Module

IC: 5119A-FC6000S

DNX5190/ DNX5060EX:

???Contains Transmitter Module

FCC ID : XQN-BTR60X

???Contains Transmitter Module

IC: 9688A-BTR601