Grizzly_Dust_Collector

MODEL G1028Z/G1029Z

DUST COLLECTOR

OWNER'S MANUAL

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#JM10379 PRINTED IN TAIWAN

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????

INTRODUCTION

Foreword

We are proud to offer the Model G1028Z/G1029Z Dust Collector. This machine is part of a growing Grizzly family of fine woodworking machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly???s com- mitment to customer satisfaction.

The specifications, drawings, and photographs illustrated in this manual represent the Model G1028Z/G1029Z when the manual was prepared. However, owing to Grizzly???s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.

For your convenience, we always keep current Grizzly manuals available on our website at www. grizzly.com. Any updates to your machine will be reflected in these manuals as soon as they are complete. Visit our site often to check for the lat- est updates to this manual!

-2-

Contact Info

If you have any comments regarding this manual, please write to us at the address below:

Grizzly Industrial, Inc.

C/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: manuals@grizzly.com

We stand behind our machines. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901 E-Mail: techsupport@grizzly.com Web Site: http://www.grizzly.com

G1028Z/G1029Z Dust Collector

Machine Data Sheet

???????????????????????????????????????

???????????????

????????????????????????????????????

??????????????????????????????????????????????????????????????????

?????????????????????????????????????????????????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????

?????????????????????????????????

??????????????????

????????????

????????????????????????????????????????????????????????????

???????????????????????????

?????????????????????????????????????????????

????????????????????????????????????????????????????????????

????????????????????????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????????

???????????????

???????????????????????????????????????????????????????????????

???????????????????????????

??????????????????????????????????????????

?????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????

Machine Data Sheet

???????????????????????????????????????

???????????????

????????????????????????????????????

?????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????

?????????????????????????????????

??????????????????

????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????????

????????????????????????????????????????????????????????????

???????????????????????????

?????????????????????????????????????????????

????????????????????????????????????????????????????????????

????????????????????????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????????

???????????????

???????????????????????????????????????????????????????????????

???????????????????????????

??????????????????????????????????????????

?????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????

Safety Instructions for Machinery

???????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????? ?????????????????? ???????????????????????? ???????????? ???????????????

??????????????? ????????????????????????????????? ?????????????????????????????? ?????????

???????????????????????? ????????????????????????????????? ??????????????? ???????????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

?????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????? ???????????? ??????????????????????????? ???????????? ??????????????????????????? ?????? ??????????????? ????????????

???????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????

?????????????????????????????? ????????????????????? ?????????????????????????????? ???????????? ?????????????????????

??????????????????????????????????????????????????????

???????????? ?????????????????? ?????????????????? ??????????????? ???????????????????????? ?????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????? ???????????? ???????????? ????????? ??????????????????????????????

?????????????????????????????????????????? ????????? ???????????? ???????????? ?????????????????????

???????????? ????????? ?????????????????? ???????????? ????????????????????????????????? ????????? ?????????????????? ????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????? ?????????????????? ????????????????????? ?????????????????????????????? ??????????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????? ????????????????????????????????? ??????????????? ??????????????????

????????????????????? ????????????????????? ??????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????? ?????????????????????????????? ??????????????? ??????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????

?????????????????????????????? ??????????????? ????????????????????? ???????????? ????????? ??????????????????

???????????? ??????????????? ?????????????????????????????? ?????????????????????

????????????????????????????????????????????????

???????????????????????????????????? ?????????????????????????????? ??????????????? ????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????

???????????? ?????????????????? ???????????? ???????????????????????? ??????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????? ????????????????????? ???????????????????????? ????????????????????????????????? ????????????????????? ?????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????? ???????????????????????????????????? ???????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????? ??????????????????????????????????????? ??????????????????????????? ????????????????????????

???????????????????????????????????????????????????????????????????????????????????????

???????????????????????? ???????????? ?????????????????? ????????????????????????????????? ??????????????? ?????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????

????????????????????????????????? ????????????????????????????????? ???????????? ????????????????????? ?????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????? ?????? ???????????????????????? ?????????????????????????????? ??????????????????????????? ???????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????????????????????????????

???????????? ??????????????? ??????????????????????????? ???????????? ?????????????????????

????????????????????????????????? ????????????????????? ??????????????????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????????????????????????????

???????????? ????????????????????? ??????????????? ????????????????????? ??????????????????

???????????? ?????????????????? ????????????????????? ??????????????????????????????

??????????????????????????????

??????????????????????????????????????? ??????????????? ???????????? ????????? ??????????????????????????????

????????? ???????????? ???????????????????????????????????? ???????????????????????? ????????? ????????????????????? ????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????? ??????????????? ????????? ??????????????? ???????????? ???????????? ???????????????????????? ????????? ????????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????

Additional Safety for Dust Collectors

1.MACHINE USE. Do not use this dust col- lector to pick up liquids and metal scrap including, but not limited to, nails and fil- ings. Also, do not pick up material which cannot safely pass through the impeller such as solid wood scraps.

2.KEEPING FINGERS SAFE. Do not place your hands or tools near the open inlet during operation for any reason including, but not limited to, unclogging material and testing suction. The impeller could cause serious damage to body parts if touched while spinning.

3.SAFE SERVICING. Disconnect power and allow impeller to completely stop before servicing or working on the dust collector ducting system.

4.SUSPENDED DUST PARTICLES AND IGNITION SOURCES. Do not operate the dust collector in areas where explosion risks would be high if dust were dispersed into the area. Areas of high risk include, but are not limited to, areas near pilot lights or open flames.

5.EMPTYING DUST. When emptying dust from the collection bags or drum, wear a respirator and safety glasses. Empty dust into an approved container and dispose of properly.

6.AVOIDING FIRES. Do not allow steel to strike against impeller???this may produce a spark. Sparks can smolder in wood dust for a long time before fire or flame is detected. If metal contacts metal during operation, immediately turn off the dust collector, unplug the power cord from the outlet or flip the disconnect switch and wait for all moving parts to stop. Remove collection bags and empty the dust into an approved air tight metal container in case of spark. Remedy the metal to metal contact prob- lem before resuming operation.

7.OPERATIONAL QUESTIONS. If at any time you are experiencing difficulties performing the intended operation, stop using the machine! Then contact our Tech Support or ask a qualified expert how the operation should be performed.

8.DUST HAZARD. Be aware that certain

woods may cause an allergic reaction in people and animals, especially when exposed to fine dust. Make sure you know what type of wood dust you will be exposed to in case there is a possibility of an aller- gic reaction. Always wear an approved respirator during and for a short time after machine operation!

9.CLEANING AIR. Do not confuse this dust collector with an air cleaner. This dust col- lector is only designed to collect dust from a machine, not clean dust suspended in the air.

Like all machines there is danger associated with this machine. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to lessen the possibility of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.

G1028Z/G1029Z Dust Collector

No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious per- sonal injury, damage to equipment, or poor work results.

-9-

SECTION 2: CIRCUIT REQUIREMENTS

G1028Z

110/220V Operation

Serious personal injury could occur if you connect the machine to power before com- pleting the setup process. DO NOT connect the machine to the power until instructed later in this manual.

Electrocution or fire could result if machine is not grounded and installed in compliance with electrical codes. Compliance MUST be verified by a qualified electrician!

NOTICE

The Model G1028Z is prewired for 110V. If you plan to operate the machine at 220V, the motor must be rewired (see Page 27).

Full Load Amperage Draw

This machine draws the following amps under maximum load:

Power Supply Circuit Requirements

-10-

If you are unsure about the wiring codes in your area or you plan to connect your machine to a shared circuit, consult a qualified electri- cian.

Power Connection Device

The type of plug required to connect your machine to power depends on the type of service you cur- rently have or plan to install. We recommend using one of the plugs shown in Figure 1.

Figure 1. Recommended plug types.

Extension Cords

Using extension cords may reduce the life of the motor. Instead, place the machine near a power source. If you must use an extension cord:

???For 110V, use at least a 12 gauge cord that does not exceed 50 feet in length.

???For 220V, use at least a 14 gauge cord that does not exceed 50 feet in length.

???The extension cord must have a ground wire and plug pin.

G1028Z/G1029Z Dust Collector

G1029Z

220V Operation

Serious personal injury could occur if you connect the machine to power before com- pleting the setup process. DO NOT connect the machine to the power until instructed later in this manual.

Electrocution or fire could result if machine is not grounded and installed in compliance with electrical codes. Compliance MUST be verified by a qualified electrician!

Full Load Amperage Draw

This machine draws the following amps under maximum load:

Amp Draw.............................................. 12 Amps

Power Supply Circuit Requirements

You MUST connect your machine to a grounded circuit that is rated for the amperage given below. Never replace a circuit breaker on an existing cir- cuit with one of higher amperage without consult- ing a quali???ed electrician to ensure compliance with wiring codes. If you are unsure about the wiring codes in your area or you plan to con- nect your machine to a shared circuit, consult a qualified electrician.

Power Connection Device

The type of plug required to connect your machine to power depends on the type of service you cur- rently have or plan to install. We recommend using the plug shown in Figure 2.

Figure 2. 6-15 plug and receptacle.

Extension Cords

Using extension cords may reduce the life of the motor. Instead, place the machine near a power source. If you must use an extension cord:

???Use at least a 14 gauge cord that does not exceed 50 feet in length!

???The extension cord must also have a ground wire and plug pin.

???A qualified electrician MUST size cords over 50 feet long to prevent motor damage.

SECTION 3: SETUP

This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!

Wear safety glasses dur- ing the entire setup pro- cess!

This machine and its com- ponents are very heavy. Get lifting help or use power lifting equipment such as a forklift to move heavy items.

Items Needed for Setup

The following items are needed to complete the setup process, but are not included with your machine:

???Safety Glasses (for each person) .............. 1

???Open End Wrench 12mm........................... 1

???Phillips Head Screwdriver .......................... 1

-12-

Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover the machine is damaged, please imme- diately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent.

Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

G1028Z/G1029Z Dust Collector

Clean Up

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly???s G7895 Citrus Degreaser. To clean thoroughly, some parts must be removed. For optimum performance from your machine, clean all moving parts or sliding contact surfaces. Avoid chlorine-based solvents, such as acetone or brake parts cleaner that may damage painted surfaces. Always follow the manufacturer???s instructions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

G7895???Grizzly Citrus Degreaser

This natural, citrus-based degreaser is a great solution for removing export grease, and it???s much safer to work around than nasty solvents.

Figure 3. Grizzly citrus degreaser.

G1028Z/G1029Z Dust Collector

Site Considerations

Floor Load

Refer to the Machine Data Sheet for the weight and footprint specifications of your machine. Some residential floors may require additional reinforcement to support both the machine and operator.

Placement Location

Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your new machine. See Figure 4 for the minimum working clearances.

331???2"

211???4"

Figure 4. Minimum working clearances.

Children and visitors may be seriously injured if unsuper- vised around this machine. Lock entrances to the shop or disable start switch or power connection to prevent unsupervised use.

-13-

Assembly

To assemble your machine:

1.Position the base plate upside down and mount the casters to the base plate using

(16)5???16"-18 x 1???2" flange bolts, as shown in

Figure 5.

Figure 5. Mounting casters to base.

2.Set the collector body on top of the base plate so the intake portion is near the edge of the base plate and the bolt holes are aligned, as shown in Figure 6. Secure the collector body to the base plate with (4) 5???16"-18 x 1???2" flange bolts.

Collector Body

Flange Bolts

Figure 6. Mounting collector to base.

-14-

3.Insert the rubber gasket between the collec- tor and lower outlet flange, and secure using

(8)5???16"-18 x 1???2" flange bolts, as shown in

Figure 7.

Note: When connecting parts that have a gas- ket applied to the mounting surface, always tighten the fasteners in a diagonal and rota- tional manner to ensure the gasket does not become crimped and the seal compromised.

Lower Outlet Flange

Figure 7. Mounting outlet to collector body.

4.Attach the lower collector support brackets to the top edge of the base plate using (4) 5???16"- 18 x 1???2" flange bolts, as shown in Figure 8.

Lower

Support

Brackets

Figure 8. Mounting support bracket to base.

G1028Z/G1029Z Dust Collector

5.Secure the front lower support bracket to the collector with (2) 5???16"-18 x 1???2" flange bolts.

6.Place the upper support bracket over the lower support bracket, and secure with (2) 5???16"-18 x 1???2" flange bolts, as shown in Figure

Note: The collector attaches to each sup- port bracket. The inside of the collector is funnel shaped and directs the air around in a cyclone motion. Make sure that the inside taper (funnel) is faced downward and the col- lector inlet faces toward the collector body.

Figure 9. Mounting collector to brackets.

7.Slip a loosened hose clamp over each end of the flex-hose, and attach the ends over the collector and collector body outlet. Tighten each hose clamp until snug, as shown in

Figure 10.

Flex Hose

Hose Clamp

Figure 10. Attaching flex hose onto collector body outlet.

G1028Z/G1029Z Dust Collector

8.Hook the top loop of the upper filter bag (fabric) over the support bracket, as shown in

Figure 11.

Figure 11. Attaching upper filter bag.

9.Tighten the upper bag to the collector using the clamp shown in Figure 12.

Clamp

Figure 12. Upper collection bag secured.

-15-

10.Slip the bottom plastic collection bag over the bottom edge of the collector and tighten the clamp on the tightest notch possible.

Note: DO NOT force the clamp, choose the next notch over, then clamp in place.

11.Press the ???Y??? inlet onto the inlet cover flange, as shown in Figure 13. The inlet is secured to the collector body by a press-on fit.

Figure 13. Installing "Y" inlet.

-16-

Test Run

Do NOT put hands or small objects near inlet openings during opera- tion. Objects sucked into the inlet will hit the impel- ler blade. Failure to heed this warning could result in property damage or personal injury.

Once the assembly is complete, test run your machine to make sure it runs properly.

If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine immediately, then review the

Troubleshooting on Page 29.

If you still cannot remedy a problem, contact our Tech Support at (570) 546-9663 for assistance.

To test run the machine:

1.Make sure you have read the safety instruc- tions at the beginning of the manual and that the machine is setup properly.

2.Make sure all tools and objects used during setup are cleared away from the machine..

3.Connect the machine to the power source.

4.Turn the machine ON.

5.Listen to and watch for abnormal noises or actions. The machine should run smoothly with little or no vibration or rubbing noises.

???Strange or unusual noises should be inves- tigated and corrected before operating the machine further. Always disconnect the machine from power when investigating or correcting potential problems.

6.Turn the machine OFF.

G1028Z/G1029Z Dust Collector

SECTION 4: DESIGNING THE

SYSTEM

Always guard against static electrical build up by grounding all dust col- lection lines.

The Model G1028Z/G1029Z can be operated as either a stationary or a mobile unit. There are advantages and disadvantages to both set-ups. The advantage of the mobile system is eliminating the cost of many ducts and fittings. On the other hand, the stationary system is more versatile and convenient.

If using the Model G1028Z/G1029Z as a central dust collector system, put the dust collector in an out of the way location such as a corner or sepa- rate room. The dust collector is capable of collect- ing dust from up to two machines running simul- taneously. Grizzly offers a complete line of dust collection accessories for setting up a stationary system. Additionally, Grizzly offers a complete guide book entitled Dust Collection Basics.

Whatever system you choose, always make sure there are no open flames or pilot lights in the same room as the dust collector. There is a risk of explosion if dust is dispersed into the air.

G1028Z/G1029Z Dust Collector

You have many choices regarding main line and branch line duct material. For best results, use metal duct for the main line and branch lines, then use a short lengths of flexible hose to connect each machine to the branch lines.

Plastic duct is also a popular material for home shops. However, be aware that there is a fire or explosion hazard if plastic duct material is used for dust collection without being grounded against static electrical charge build-up. This topic will be discussed later in this section. Another problem with using plastic is that it is less efficient per foot than metal.

Metal Duct

Advantages of metal duct is its conductivity and that it does not contribute to static electrical charge build-up. However, static charges are still produced when dust particles strike other dust particles as they move through the duct. Since metal duct is a conductor, it can be grounded quite easily to dissipate any static electrical charges.

Figure 14. Examples of metal pipe and components.

-17-

There are a number of options when it comes to metal duct, but metal duct that is specially manu- factured for dust collection is the best choice. When selecting your metal duct, choose high quality metal duct with smooth welded internal seams that will minimize airflow resistance. This type of duct usually connects to other ducts or elbows with a simple, self-sealing clamp, is very quick and easy to assemble, and can be readily dismantled and re-installed. This is espe- cially important if you ever need to change things around in your shop or add more tools.

Avoid inferior metal duct that requires you to cut it to length and snap it together. This type of duct is time consuming to install because it requires you to seal all the seams with silicone and screw the components on the ends with sheet metal screws. Another disadvantage is the rough internal seams and crimped ends that unavoidably increase static pressure loss.

Flexible Duct

Flexible hose is generally used for short runs, small shops, and at rigid duct-to-tool connections. There are many different types of flex hose on the market today. These are manufactured from materials such as polyethylene, PVC, cloth hose dipped in rubber, and even metal, including steel and aluminum.

The superior choice for flexible ducting is metal flex hose that is designed to be flexible and as smooth as possible to reduce static pressure loss.

Figure 15. Example of flexible metal duct.

There are also many kinds of pure plastic flexible hose, such as non-perforated drainage type hose and dryer vent hose. Drainage type hose, while being economical, does not quite have the flex- ibility required for dust collection. The inside of the duct is also deeply corrugated and can increase the static pressure loss by as much as 50% over smooth wall duct. Dryer vent hose offers greater flexibility, but is non-resistant to abrasion and tends to collapse in a negative pressure system. We DO NOT recommend using dryer vent hose in your dust collection system.

If using flex-hose, choose one of the many types designed specifically for the movement of solid particles, i.e. dust, grains and plastics. However, the cost of specifically designed flexible duct can vary greatly. Grizzly offers polyethylene hose, which is well suited for the removal of particulate matter, especially sawdust, since it is durable and completely flexible. Polyethylene is also very eco- nomical and available in a wide variety of diam- eters and lengths for most applications.

Plastic Duct

The popularity of plastic duct is due to the fact that it is economical and readily available. It is also simple to assemble and easily sealed against air loss. The primary disadvantage of plastic duct for dust collection is the inherent danger of static electrical build-up.

Figure 16. Example of plastic duct and components.

System Design

Step 1. Decide Who Will Design

For most small-to-medium sized shops, you can design and build the dust collection system your- self without hiring engineers or consultants. We have included some basic information here to get you started on a basic design.

If you have a large shop or end up designing a complicated system, then we recommend addi- tional research beyond this manual, or that you seek the help of an expert.

Step 2. Sketch Your Shop Layout

When designing a successful dust collection system, planning is the most important step. In this step, you must sketch a basic layout of your shop.

Before you get out your pencil and paper, we rec- ommend you visit our FREE Workshop Planner available on our website at www.grizzly.com.

Our Workshop Planner will allow you to quickly and easily draw and print a basic shop layout. Don't worry, non-Grizzly brand machines can be substituted with Grizzly machines for layout pur- poses. Note: After you're finished, make sure to save your layout for later modification.

Your sketch only needs the basic details of the shop layout, similar to Figure 17, including all your current/planned machines and your planned placement of the dust collector.

??????????????????????????????????????????

Figure 17. Flex-hose grounded to machine.

G1028Z/G1029Z Dust Collector

Step 3. Sketch a Basic Duct Layout

For the next step, sketch how you will connect your machines to the dust collector. Consider these general guidelines for an efficient system:

1.Machines that produce the most saw dust should be placed nearest to the dust collector (i.e. planers and sanders).

2.Ideally, you should design the duct system to have the shortest possible main line and secondary branch ducts. See Figures 18 & 19 for ideas of good duct layouts vs bad duct layouts.

Figure 18. Good duct layout.

Figure 19. Bad duct layout.

-19-

3.Directional changes should be kept to a mini- mum. The more directional change fittings you use directly increases the overall resis- tance to airflow.

4.Gradual directional changes are more effi- cient than sudden directional changes (i.e. use the largest corner radius possible when changing hose or pipe direction).

5.Each individual branch line should have a blast gate immediately after the branch to control suction from one machine to another.

6.The simpler the system, the more efficient and less costly it will be.

Step 4. Determine Required CFM of

Each Machine

Since each machine produces a different amount of sawdust, the requirements for the minimum amount of CFM to move that sawdust is unique to the machine (for example, a planer produces more sawdust than a table saw). Knowing this required CFM is important to gauging which size of duct to use.

Figure 20 gives you a close estimation of the airflow your machine requires. Keep in mind that machines that generate the most sawdust should be placed closest to the dust collector. If the machine has multiple dust ports, the total CFM required is the sum of all ports.

If your machine doesn't have a built in dust port, use Figure 21 to determine which size of dust port to install on your machine.

Widebelt Sander (24"_51" double head).5 x 4"

Figure 21. Dust port size and quantity per average machine.

Write the required CFM for each machine on your sketch, as shown in Figure 22.

?????????

??????

?????????

????????? ?????????

Figure 20. Approximate required airflow for machines, based on dust port size.

-20-

?????????

Figure 22. CFM requirements labeled for each machine.

G1028Z/G1029Z Dust Collector

Determining Main Line Duct Size

The general rule of thumb for a main line duct is that the velocity of the airflow must not fall below 3500 FPM.

For small/medium sized shops, using the inlet size of the dust collector as the main line duct size will usually keep the air velocity above 3500 FPM and, depending on your system, will allow you to keep multiple branches open at one time.

Mark your drawing as in Figure 23, but using the inlet size for your dust collector as the main line.

Figure 23. Main line size labeled on sketch.

Determining Branch Line Duct Size

The general rule of thumb for a branch line duct is that the velocity of the airflow must not fall below 4000 FPM.

For small/medium sized shops, using the dust port size from the machine as the branch line duct size will achieve the correct velocity in most appli- cations. However, if the dust port on the machine is smaller than 4", make the branch line 4" and neck the line down right before the dust port.

Note: Systems with powerful dust collectors work better if multiple blast gates are left open. This also allows you to run two machines at once. Experiment with different combinations of blast gates open/closed to find the best results for your system.

Write your determined branch line sizes on your drawing, as shown in Figure 24.

G1028Z/G1029Z Dust Collector

Figure 24. Branch line sizes labeled on sketch.

Here are some frequently asked questions when determining branch line sizes:

How do I figure which size of branch line to use if the machine has two dust ports?

Simply add the total CFM given for each size from Figure 20 and refer to that CFM number to Figure 25. Then, split the branch line just before the dust ports with matching duct sizes.

What if two machines share the same branch line?

You have two options:

1.If both machines will be running at the same time, add the total CFM given for each size from Figure 20 and match the branch line given in Figure 25.

2.If both the machines will never be run at the same time, reference the machine with biggest dust port to Figure 25 and add blast gates after the Y-branch to open/close the line to each machine.

Figure 25. Branch line sizing chart by total CFM (for use when multiple machines share line).

-21-

Calculating Duct Resistance

Adding duct work, elbows, branches and any other components to a duct line increases airflow resistance (static pressure loss). This resistance can be minimized by using rigid (smooth) pipe and gradual curves, as opposed to flexible pipe and 90?? elbows.

To help you think about this resistance, imagine riding a bicycle in a tunnel that is an exact replica of your duct work. If the inside of the tunnel is very bumpy (flexible pipe) and has a lot of sharp turns (90?? elbows), it will take a lot more effort to travel from one end to the other.

The purpose of calculating the resistance is to determine if it is low enough from the machine to the dust collector to meet the given CFM require- ment for the machine. Use the charts in Figure 26 to calculate the resistance of duct work.

Figure 26. Static pressure loss charts.

-22-

In most small/medium shops it is only necessary to calculate the line with the longest duct length or the most fittings (operating under the assumption that if the line with the highest resistance works, the others will be fine).

To calculate the static pressure of any given line in the system, follow these steps:

1.Make a list of each size duct in the line, includ- ing the length, and multiply those numbers by the static pressure value given in Figure 26.

2.List each type of elbow or branch and multiply the quantity (if more than one) by the static pressure loss given in Figure 26.

3.Add the additional factors from Figure 27 to your list.

Figure 27. Additional factors affecting static pressure.

4.Total your list as shown in the example in Figure 28 to come up with your overall static pressure loss number for that line.

Note: Always account for a seasoned filter, so you don't end up with a system that only works right when the filter is clean.

???????????????????????????

????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????? ????????????

?????????????????????????????????

????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????? ????????????

???????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????????????????????????????? ???????????????

?????????????????????????????????????????????

????????????????????????????????????????????? ???????????????????????????????????????????????????????????????????????????????????????????????? ????????????

???????????????????????????????????? ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ????????????

??????????????????????????????????????????????????????

????????????????????????????????????????????? ???????????????????????????????????????????????????????????????????????????????????????????????? ???????????????

??????????????????????????????????????????????????????????????? ???????????????????????????????????????????????????????????????????????? ???????????????

Figure 28. Totaling static pressure numbers.

G1028Z/G1029Z Dust Collector

Note: When calculating static pressure loss to determine if multiple lines can be left open at the same time, only include the main line numbers once.

5.Compare the total static pressure loss for that line to the maximum static pressure loss found on the data sheet for your machine (located toward the front of this manual).

???If the CFM for your static pressure loss is above the requirement of the machine, then the line will most likely be successful. Congratulations! You've just designed your own dust system. Refer to Page 26 to start buying the components necessary to make your system a reality.

???If the CFM for your static pressure loss is below the requirement of the machine, then that line will not effectively collect the dust. You must then modify some of the factors in that line to reduce the static pressure loss. Some of the ways to do this include 1) installing larger duct, 2) reducing amount of flexible duct used, 3) increasing machine dust port size, 4) moving machine closer to dust collector to eliminate duct length, and

5)reducing 90?? elbows or replacing them with 45?? elbows.

System Grounding

Since plastic hose is abundant, relatively inex- pensive, easily assembled and air tight, it is a very popular material for conveying dust from woodworking machines to the dust collector. We recommend using flexible hose (flex-hose) to connect the woodworking machine to the dust collector. However, plastic flex-hose and plastic duct are an insulator, and dust particles moving against the walls of the plastic duct create a static electrical build up. This charge will build until it discharges to a ground. If a grounding medium is not available to prevent static electrical build up, the electrical charge will arc to the nearest grounded source. This electrical discharge may cause an explosion and subsequent fire inside the system.

To protect against static electrical build up inside a non-conducting duct, a bare copper wire should be placed inside the duct along its length and grounded to the dust collector. You must also confirm that the dust collector is continuously grounded through the electrical circuit to the elec- tric service panel.

If you connect the dust collector to more than one machine by way of a non-conducting branching duct system and blast gates, the system must still be grounded as mentioned above. We recom- mend inserting a continuous bare copper ground wire inside the entire duct system and attaching the wire to each grounded woodworking machine and dust collector.

Always guard against static electrical build up by grounding all dust collection lines.

Be sure that you extend the bare copper wire down all branches of the system. Do not forget to connect the wires to each other with wire nuts when two branches meet at a ???Y??? or ???T??? connec- tion.

Ensure that the entire system is grounded. If using plastic blast gates to direct air flow, the grounding wire must be jumped (Figure 29) around the blast gate without interruption to the grounding system.

Plastic Blast

Gate

Figure 29. Ground jumper wire when using plastic blast gates and metal duct.

SECTION 5: OPERATIONS

Operation Safety

To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.

Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.

Loose hair, clothing, or

jewelry could get caught

in machinery and cause

serious personal injury.

Keep these items away from moving parts at all times to reduce this risk.

NOTICE

If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

G1028Z/G1029Z Dust Collector

Do NOT put hands or small objects near inlet openings during opera- tion. Objects sucked into the inlet will meet with the impeller blade. Failure to heed this warning could result in property damage or per- sonal injury.

General

Operating your Model G1028Z/G1029Z is simple and straightforward. Blast gates can be used at the start of each branch line to control the air flow from the woodworking machine to the dust collec- tor. If a machine is not being used, keep the blast gate closed to maintain higher levels of efficiency throughout the system.

-25-

SECTION 6: ACCESSORIES

T20514???Small Half-Mask Respirator

T20515???Medium Half-Mask Respirator

T20516???Large Half-Mask Respirator

T20511???Pre-Filter P100

T20539???Cartridge Filter 2PK P100

T20541???Cartridge Filter 2PK P100 & O Vapor

Wood and other types of dust can cause severe respiratory damage. If you work around dust every- day, a half-mask respirator can greatly reduce your risk. Compatible with safety glasses!

Figure 31. Half-mask respirator with disposable cartridge filters.

H5293???4" Metal Duct Starter Kit

H5295???5" Metal Duct Starter Kit

H5297???6" Metal Duct Starter Kit

Save over 20% with this great starter kit. Includes:

(2) machine adapters, (10) pipe clamps, (3) 5' straight pipes, (1) branch, (3) pipe hangers, (1) end cap, (3) adjustable nipples, (1) 90?? elbow, and

(1) 60?? elbow.

Figure 32. Metal Duct Starter Kit.

-26-

H5294???4" Metal Duct Machine Addition Kit H5296???5" Metal Duct Machine Addition Kit H5298???6" Metal Duct Machine Addition Kit

Save over 20% with this great machine addition kit. Includes: (2) blast gates, (1) machine adapter, (10) pipe clamps, (2) pipe hangers, (2) 5' straight pipes, (2) adjustable nipples, (1) branch, and (1) 60?? elbow.

Figure 33. Metal Duct Machine Addition Kit.

G6163???4" Clamp

G7343???5" Clamp

G7361???6" Clamp

H5228???7" Clamp

H5238???8" Clamp

H5253???9" Clamp

These clamps feature lever latches and foam seals, and secure around the rolled ends of fit- tings and pipe.

Figure 34. Dust collection pipe clamps.

G1028Z/G1029Z Dust Collector

G6162???4" x 5' Straight Metal Pipe

G7346???5" x 5' Straight Metal Pipe

G7364???6" x 5' Straight Metal Pipe

H5227???7" x 5' Straight Metal Pipe

H5237???8" x 5' Straight Metal Pipe

These laser welded straight pipes ensure a super smooth internal seam. Ends easily clamp together for a sealed fit without screws or silicone.

Figure 35. Straight Metal Pipe.

H7215???4" x 5' Rigid Metal Flex Hose H7216???5" x 5' Rigid Metal Flex Hose H7217???6" x 5' Rigid Metal Flex Hose H7218???7" x 5' Rigid Metal Flex Hose H7219???8" x 5' Rigid Metal Flex Hose

This flex hose provides just enough flexibility to make difficult connections while still keeping the inside wall as smooth as possible to minimize static pressure loss.

Figure 36. Rigid Metal Flex Hose.

G1028Z/G1029Z Dust Collector

Metal Branches

We carry many different branches, all designed to minimize airflow resistance.

Figure 37. Metal Branches.

Reducers & Adapters

We carry a multitude of reducers and elbows to cover most applications from 4" through 9".

Figure 38. Metal Reducers & Adapters.

Metal Elbows

These industrial metal elbows are available from 4"???8" with 90??, 60??, 45??, or 30?? curves. Call (800) 523-4777 or visit www.grizzly.com for more information and pricing.

Figure 39. Metal elbow examples.

-27-

SECTION 7: MAINTENANCE

Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.

Schedule

For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section.

Daily Check:

???Loose mounting bolts.

???Worn switch.

???Worn or damaged wires.

???Almost full collection bag.

???Any other unsafe condition.

Lubrication

Since all bearings are shielded and permanently lubricated, simply leave them alone until they need to be replaced. Do not lubricate them.

-28-

Always wear a respira- tor when emptying the dust collection bags on the dust collector. Sawdust may cause allergic reactions or respiratory problems.

Bag Cleaning

Always empty the collection bags on a regular basis. Emptying the collection bags allows the machine to operate at a much higher level of efficiency.

Always wear the appropriate respirator or dust mask and safety glasses when emptying the col- lection bags. Small dust particles can escape the bags during emptying, causing them to become airborne and easily inhaled. This microscopic air- borne dust is extremely unhealthy to breathe and can cause serious health problems.

While the Model G1028Z/G1029Z excels at col- lecting the majority of wood dust produced by your machines, it is not an air filter; therefore, we strongly recommend the supplemental aid of a shop air filter such as the Grizzly G5955 or G9956. Air filters are designed to collect the smaller dust particles that a dust collector bags cannot trap.

G1028Z/G1029Z Dust Collector

Motor & Electrical

SECTION 8: SERVICE

Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel- ops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical Support at (570) 546-9663.

Troubleshooting

-29-

Dust Collector Operation

G1028Z Wiring Diagram

Figure 40. Start Capacitor.

??????????????????????????????????????????

??????????????????

????????? ???????????????????????????

????????????????????????????????????????????????

Figure 42. 110V Junction Box.

Figure 43. 220V Junction Box.

G1029Z Wiring Diagram

Figure 44. Start Capacitor.

????????????????????????

??????????????? ??????

O N

Figure 45. Junction Box.

???????????? ?????????????????? ????????????????????? ?????????????????? ??????????????? ?????????

????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????? ???????????? ?????????????????? ??????????????? ???????????????????????????

????????????????????? ???????????? ???????????? ????????????????????? ????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????

Figure 46. Switch.

?????????????????????????????????????????????????????????????????????????????????

????????????????????????????????????????????????

G1028Z/G1029Z Parts Breakdown

??????

G1028Z Parts List

G1029Z Parts List

???????????????????????????????????????????????????????????????

???????????????????????????????????????

??????????????????????????????????????????????????????????????????

???????????????

????????????

????????????????????????????????????????????????????????????????????????

???????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????

?????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????????????????????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????

WARRANTY AND RETURNS

????????????????????????????????????????????????????????????

??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

???????????????????????????????????????