PKD915SM

GE Profile??? 27" Warming Drawer

Dimensions and Installation Information (in inches)

Under Oven Installation

23-1/2" min.

KW Rating

120V .45

Breaker Size

120V 15 Amps

Optional Accessories: JXPN2 ??? Optional Pan Set Accessory for Warming Drawer. Two commercial pans with lids (4??? deep) ZXD30B ???1/4??? panel kit capability

Warming Drawer Dimensions

Undercounter Installation: A solid barrier must be installed at least 1??? from the lowest point of the bottom of cooktop burner box to the top of the cutout. Use any solid material such as 1/4???-thick plywood. Allow at least 1/4??? air gap between the barrier and the top of the warming drawer. See label on top of the warming drawer for approved cooktop models.

Under Oven Installation: Additional clearance between cutouts may be required. Check to be

23-1/4

26-3/4

of block

25-1/2

1" Min. above toekick or adjust to oven installation height

10-1/2

26-3/4

sure that oven supports above the warming

Undercounter Installation

drawer location do not obstruct the required interior 23-1/2??? depth and 9-1/4??? height.

Door handle protrudes 2-3/4??? from door face. Cabinets and drawers on adjacent 45?? and 90?? walls should be placed to avoid interference with

rear cabinet wall 9" from floor to bottom of block

1-1/2" Cabinet top

the handle.

Installation Information: Before installing, consult

installation instructions packed with product for ??current dimensional data.

For answers to your Monogram,?? GE Profile??? or

1/4" Air gap

36" Countertop height

GE?? appliance questions, visit our website at ge.com or call GE Answer Center?? service, 800.626.2000.

23-1/2 min.

Install a solid barrier and a 1/4" min. air gap

above warming drawer.Listed by Underwriters Laboratories