JP328SK
GE?? 30"
Dimensions and Installation Information
KW Rating
240V 7.4
208V 5.6
Breaker Size
240V 40 Amps???
208V 30 Amps???
???Note: Check local codes for required breaker size
Important: Maintain 5" (12.7 cm) minimum vertical clearance between the cooktop bottom and any combustible surfaces.
Clearance not required when installing wall oven underneath. Requires an 18" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.
Cooktop models JP328WK/328BK/328CK/328SK are approved for use over GE 27" or 30" Single Wall Ovens. Refer to cooktop and wall oven installation instructions packed with product for current dimensional data.
If installed with a GE Telescopic Downdraft System, consult both cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be
The countertop must be at least 26" deep with a flat surface area of
This cooktop cannot be installed in countertops that cannot accept screws, such as granite or marble, etc.
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening) use the following
For answers to your Monogram,?? GE Profile??? or GE?? appliance questions, visit our website at ge.com or call GE Answer Center?? service, 800.626.2000.
(min.)
Electrical junction box 16" MIN. below countertop
Cut should not interfere with cabinet structure
at front
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
5" (12.7 cm) Min. Vertical Clearance
Listed by
Underwriters
Laboratories
Specification Revised 4/06
321348
JP328SK
GE?? 30"
Features and Benefits
??? Coil heating elements - Provides consistent and even heat on the cooktop with a
???
??? Upfront controls - Controls are placed within easy reach at the front center of the cooktop
??? Heating element ???On??? light - Illuminates when the cooking surface is activated
??? Model JP328SKSS - Stainless steel
Specification Revised 4/06
321348