TA B L E O F C O N T E N T S

2009) (May 316901300

Thank you for choosing Frigidare.

This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance.We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use this page to record important product information.

Need help??

Visit the Frigidaire web site at www.frigidaire.com

Before you call for service, there are a few things you can do to help us serve your better.

Read this Use & Care manual.

It contains instructions to help you use and maintain your range properly.

If you received a damaged range ...

immediately contact the dealer (or builder) that sold you the range.

Save time and money.

Check the section titled ???Before you call???. This section helps step you through some common problems that might occur. If you do need service, help is only a phone call away. A list of toll-free customer service numbers are included in the back of this manual. Or call Frigidaire Customer Services at 1-800-944-9044, 24 hours a day, 7 days a week.

Product Registration

Registering your product with Frigidaire enhances our ability to serve you. You can register online at www.frigidaire.com or by dropping your Product Registration Card in the mail.

Serial plate location

Serial plate location:

open storage drawer (some models) or remove lower front panel (some models).

Record model & serial numbers here

Purchase date

Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type.

Definitions

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

IMPORTANT

IMPORTANT indicates installation, operation, maintenance or valuable information that is not hazard related.

Important Safety Instructions

???Remove all tape and packaging before using the range. Destroy the carton and plastic bags after unpacking the range. Never allow children to play with packaging material.

???Proper Installation???Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the National Fuel Gas Code ANSI Z223.- latest edition, or in Canada CAN/ CGA B149.1, and CAN/CGA B149.2, and the the NationalElectricalCodeANSI/NFPANo.70-latest edition, or in Canada CSA Standard C22.1, Canadian Electrical Code, Part 1, and local code requirements.

Install only per installation instructions provided in the literature package for this range. Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power to the range at the circuit breaker or fuse box in case of an emergency.

WARNING

If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

FORYOURSAFETY:

???Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

???WHATTODOIFYOUSMELLGAS:

???Do not try to light any appliance.

???Do not touch any electrical switch; do not use any phone in your building.

???Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

???If you cannot reach your gas supplier, call the fire department.

???Installation and service must be performed by a qualified installer, servicer or the gas supplier.

WARNING

???All ranges can tip.

???Injury to persons could result.

??? Install anti-tip device packed

with range.

??? See Installation Instructions.

To reduce the risk of tipping, the range must be secured by properely installed anti-tip bracket provided with the range. To check if the bracket is installed properly, visually check that

rear leveling leg is inserted into and fully secured by the anti-tip bracket by

removing lower front panel or storage drawer from the range.

For models equipped with a warmer drawer or lower oven, grasp the top rear edge of the range and carefully attempt to tilt it forward. Refer to the installation instructions for proper anti- tip bracket installation.

???Never modify or alter the construction of a range by removing the leveling legs, panels, wire covers, anti-tip brackets/screws, or any other part of the range.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning.

NEVER cover any slots, holes or passages in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may trap heat, causing a fire hazard.

Stepping, leaning or sitting on the door or drawers of a range can result in serious injuries and also cause damage to the appliance. DO NOT allow children to climb or play around the range. The weight of a child on an open oven door may cause the range to tip, resulting in serious burns or other injury.

Storage in or on appliance???flammable materials should not be stored in an oven, near surface units or in the storage drawer, warmer drawer or lower oven. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the range.

DONOTLEAVECHILDRENALONE???childrenshould not be left alone or unattended in the area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance, including the storage drawer, lower broiler drawer, warmer drawer or lower double oven.

CAUTION

Do not store items of interest to children in the cabinets above a range or on the backguard of the range. Children climbing on the range to reach items could be seriously injured.

??? Remove the oven door from any unused range if it is to be stored or discarded.

???User servicing???Do not repair or replace any part of the appliance unless specifically recommended in the manuals. All other servicing should be done only by a qualified technician, This may reduce the risk of personal injury and damage to the range.

IMPORTANT

For electric ignition models only: Do not attempt to operate the range during a power failure. If the power fails, always turn off the range. If the range is not turned off and the power resumes, the range will begin to operate again. Once the power resumes, reset the clock and oven function.

CAUTION

???DO NOT TOUCH SURFACE BURNERS, AREAS NEAR

THESEBURNERS,OVENBURNERSORINTERIOR SURFACES OF THE OVEN. Both surface and oven burners may be hot even though flames are not visible. Areas near surface burners may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among these areas are the cook top, surfaces facing the cook top, the oven vent openings and surfaces near these openings, oven door and window.

???Wear proper apparel???loose-fitting or hanging garments should never be worn while using the appliance. Do not let clothing or other flammable materials contact hot surfaces.

???Do not use water or flour on grease fires??? smother the fire with a pan lid, or use baking soda, a dry chemical or foam-type extinguisher.

???When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot.

???Use dry potholders - moist or damp potholders on hot surfaces may result in burns from steam.

Do not let potholders touch hot heating elements. Do not use a towel or other bulky cloth instead of a potholder.

???Do not heat unopened food containers - buildup of pressure may cause container to burst and result in injury.

IMPORTANT INSTRUCTIONS FOR USING

YOUR COOKTOP

WARNING

Use Proper Flame Size???Adjust flame size so it does not extend beyond the edge of the utensil. The use of undersized utensils will expose a portion of the burner flame to direct contact and may result in ignition of clothing. Proper relationship of utensil to flame will also improve efficiency.

???Know which knob controls each surface burner.

Place a pan of food on the burner before turning it on, and turn the burner off before removing the pan.

???Always turn knob to the full LITE position when igniting top burners. Visually check that burner has lit. Then adjust the flame so it does not extend beyond the edge of the utensil.

???Utensil handles should be turned inward and not extend over adjacent surface burners???To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the utensil should be positioned so that it is turned inward, and does not extend over adjacent surface burners.

???Never leave surface burners unattended at high heat settings???Boilovers cause smoking and greasy spillovers that may ignite, or a pan that has boiled dry may melt.

???Glazed cooking utensils???Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for cook top service without breaking due to the sudden change in temperature. Check the manufacturer???s recommendations for cook top use.

???When flaming foods under a ventilating hood, turn the fan on.

???Air curtain or other overhead range hoods, which operate by blowing a downward air flow on to a range, shall not be used in conjunction with gas ranges other than when the hood and range have been designed, tested and listed by an independent test laboratory for use in combination with each other.

IMPORTANT INSTRUCTIONS FOR USING

YOUR OVEN

???Use care when opening oven door , warmer drawer or lower oven door???Stand to the side of the range when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven.

???Keep Oven Vent Ducts Unobstructed. The oven vent is located below the backguard. Touching the surfaces in this area when the oven is operating may cause severe burns. Also, do not place plastic or heat-sensitive items on or near the oven vent. These items could melt or ignite.

???Placement of Oven Racks. Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot use extreme caution. Use potholders and grasp the rack with both hands to reposition. Do not let potholders contact the hot heating elements in the oven. Remove all utensils from the rack before moving.

???Do not use the broiler pan without its insert. The broiler pan and its insert allow dripping fat to drain and be kept away from the high heat of the broiler.

???Do not cover the broiler insert with aluminum foil. Exposed fat and grease could ignite.

???Protective liners???Do not use aluminum foil to line the oven bottom. Only use aluminum foil as recommended in this manual. Improper installation of these liners may result in risk of electric shock, or fire.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

SELF-CLEANING OVENS

???Clean in the self-cleaning cycle only the parts listed in this Use & Care Manual. Before self-cleaning the oven, remove the broiler pan and any utensils or foods from the oven.

???Do Not Use Oven Cleaners???No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.

???Do Not Clean Door Gasket???The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

???The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

IMPORTANT INSTRUCTIONS FOR CLEANING

YOUR RANGE

???Clean the range regularly to keep all parts free of grease that could catch fire. Pay particular attention to the area around each surface element. Do not allow grease to accumulate.

???Kitchen cleaners and aerosols???Always follow the manufacturer???s recommended directions for use.

Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury.

???Clean ventilating hoods frequently???Grease should not be allowed to accumulate on the hood or filter.

Follow the manufacturer???s instructions for cleaning hoods.

Grounding Instructions

Power supply cord with 3-prong grounding plug

WARNING

Avoid fire hazard or electrical shock. Do not use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.

This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug.

For personal safety, the range must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded.

If a 2-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified electrician.

SeetheINSTALLATIONINSTRUCTIONSpackagedwiththis range for complete installation and grounding instructions.

Conversion to Liquefied Petroleum Gas

WARNING

Personal injury or death from electrical shock may occur if the range is not installed by a qualified installer or electrician.

Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by a qualified technician.

If your gas range model is designed to allow for L.P. conversion, the L.P. conversion kit may be obtained from your local appliance dealer and should be installed by a qualified service technician. Before installing the kit be sure to follow the L.P. Installation Instructions carefully.

Your gas range features include:

1.Electronic oven control with kitchen timer.

2.Convect (convection) cooking control included (some models).

3.Left front burner valve and control knob.

4.Left rear burner valve and control knob.

5.Center accent burner valve and control knob (some models).

6.Right front burner valve and control knob.

7.Right rear burner valve and control knob.

8.Burner grates (colors vary with model).

9.Center burner grate (some models).

10.Oven interior light with removable cover.

11.Automatic oven door light switch (some models).

12.Self-cleaning oven interior.

13.Self-clean door latch.

14.Adjustable interior oven rack(s). Effortless Oven Rack??? system (not shown-some models).

15.Convect (convection) fan (some models).

16.Large 1-piece oven door handle.

17.Full width oven door with window.

18.Storage drawer with large 1-piece door handle

20.5,000 BTU simmer burner (some models).

21.9,000 BTU standard burner (some models).

22.9,000 BTU center or accent burner (some models).

23.12,000 BTU Quick Boil burner (some models).

24.14,000 or 17,000 BTU Quick Boil burner (some models).

27

Note: The features shown for your appliance may vary according to model type & color.

Be sure to visit us online at www.frigidaire.com

26

BEFORE SETTING OVEN CONTROLS

Oven vent location

The oven vent is located below the control panel (See Fig. 1). When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block the oven vent.

Fig. 1

Removing, replacing & arranging racks

To remove - pull the rack forward until it stops. Lift up front of rack and slide out.

To replace - fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.

Arranging - always arrange the oven racks when the oven is cool (prior to operating the oven).

CAUTION

Always use oven mitts when using the oven. When using the appliance, oven racks and cooktop will become very hot which can cause burns.

6

5

4

3

2

1

Fig. 2

Recommended rack positions by food type

flat oven rack

half oven rack

offset oven rack

bottom oven rack

The flat oven rack or flat handle oven rack (some models) may be used for most cooking needs. The half rack (some models) design comes with a removable section that allows for taller cooking utensils. The offset oven rack (some models) is designed to place the base of the rack about 1/2 of a rack position lower than normal. This rack design provides several additional possible positions between the standard positions. To maximize oven cooking space place the bottom oven rack (some models) in the lowest rack position for baking or roasting large cuts of meat. The Effortless??? Oven Rack (some models) is described later in this section.

Air circulation in the oven

For best baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides or back of the oven cavity. Hot air must be able to circulate around the pans and cookware in the oven for even heat to reach around the food.

Baking layer cakes with 1 or 2 oven racks

For best results when baking cakes using 2 oven racks, place cookware on rack positions 2 & 5 (See Figs. 2 & 3). For best results when using a single oven flat rack, place cookware on rack positions 2, 3 or 4 (See Figs. 2 &4).

Effortless??? Oven Rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless??? Oven Rack system:

BEFORE SETTING OVEN CONTROLS

IMPORTANT

Only the Effortless??? Oven Rack system should be used in oven rack position 2. Placing ANY other rack in oven rack position 2 will prevent the oven door from fully closing and may damage the oven door, oven cavity or the door connector brackets.

If the rack system is not assembled with the connector arms the Effortless??? Oven rack may be used in oven rack positions 2 thru 6. Do not attempt to use the Effortless??? Oven rack in rack position 1.

Fig. 1

connector arm

Fig. 3 - assembly of the Effortless??? Oven Rack

Fig. 2

oven rack

CAUTION

REMOVE ALL OVEN RACKS and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless??? Oven Rack system will be damaged and will cause oven racks to loose their shiny finish and or turn blue. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

Make sure the oven and oven racks are COMPLETLY cool and safe to touch before attempting to assemble or disassemble the Effortless??? Oven Rack system. Never pick up hot oven rack parts.

connector arm

Fig. 4

connector arm

Fig. 5

left and right door connector brackets

with connector arm ends shown in locked position (pointing upwards)

Fig. 6 - Effortless??? Oven Rack after assembly

CAUTION

Do not place flammable items such as plastic salt and pepper shakers, spoon holders or plastic wrappings on the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the range cooktop.

IMPORTANT

Do not place aluminum foil, or ANY material that can melt on the range cooktop. If these items melt they may damage the cooktop.

NOTE

The size and type of utensil used, and the amount and type of food being cooked will influence the settings needed for best cooking results.

Cookware material types

The most popular materials available are:

Aluminum - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining & pitting).

Copper - Excellent heat conductor but discolors easily.

Stainless - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.

Cast Iron - A slow heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached.

Porcelain-enamel on metal - Heating characteristics will vary depending on base material.

Glass - Slow heat conductor.

For deep fat frying; use a thermometer and adjust the surface knob accordingly. If the fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food will brown so quickly that the center will be undercooked. Do not attempt to deep fat fry too much food at once as the food will neither brown or cook properly.

*These settings are based for medium-weight metal or aluminum pans with lids. Settings may vary when using other types of pans.

Fig. 2

CAUTION

Never extend the flame beyond the outer edge of the cooking utensil. A higher flame wastes energy, and increases your risk of being burned by the flame (Fig. 3).

Correct flame setting

Incorrect flame setting

Fig. 3

Setting surface controls

The smaller simmer burner (some models) is best suited for simmering delicate sauces, etc. The standard size (9,500 BTU) burners may be used for most surface cooking needs.

The larger quick boil burner or burners (some models) are best used when bringing large quantities of liquid to temperature and when preparing larger quantities of food.

Setting a surface burner

1.Place cooking utensil on top of surface burner grate. Make sure the cooking untensil is centered and stable on the grate.

2.Push the desired surface control knob in and turn counterclockwise out of the OFF position (Fig. 1).

3.Release the knob and rotate to the lite position. Visually check that the gas burner has lit.

4.Push the control knob in and turn counterclockwise to the desired flame size. Use the control knob markings and adjust the flame as needed.

IMPORTANT

In the event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match to the burner head, then slowly turn the surface control knob to lite. After burner lights push in and turn knob to desired setting. Use caution when lighting surface burners manually.

NOTE

DO NOT cook with the surface control knob left in the LITE position. The electronic ignitor will continue to spark if the control knob is left in the LITE position. When setting any surface control knob to the LITE position, all electronic ignitors will spark at the same time. However, only the surface burner you are setting will ignite.

SETTING SURFACE CONTROLS

CAUTION

Do not place flammable items such as plastic salt and pepper shakers, spoon holders or plastic wrappings on the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the range cooktop.

Seasoning, using and caring for the griddle

Before first use:

???Wash griddle in hot soapy water. Rinse and dry completely.

???Apply a thin coat of vegetable oil to the entire surface (front and back of griddle).

???Preheat your oven to 350??F. Place the griddle on the upper rack in your oven.

???Bake griddle for 1 hour at 350??F, then turn oven OFF and let cool before removing.

???The surface may appear to have a tacky feel to it from the seasoning process. If desired, wash the griddle in hot soapy water, rinse well, and dry completely.

Using the griddle:

Remove the center burner grate and carefully replace with the griddle (some models). Preheat the griddle for 5 minutes on medium to medium low setting. Slow preheat ensures even heat distribution during the cooking process. DO NOT preheat the griddle on HI setting. Preheating on HI may warp the griddle and prevent even heat distribution.

After each use:

???To prevent rusting, store in a dry place and keep uncovered.

???After each use, clean with a stiff brush and hot water only.

???Do not clean griddle in the dishwasher.

???Dry Immediately and apply a light coating of vegetable oil to griddle before storing.

Home Canning

Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA (United States Department of Agriculture) website and be sure to read all the information they have available as well as follow their recommendations for canning procedures.

???Use only quality flat bottom canners when home canning. Use a straight-edge to check canner bottom (see ???Cookware material types??? in the Before setting surface controls section).

???Start with hot tap water to bring water to boil more quickly.

???Use the highest heat seating when first bringing the water to a boil. Once boiling is achieved, reduce heat to lowest possible setting to maintain that boil.

11

bake time ??? Use to enter the length of baking time needed.

delay start ??? Use with bake, convection, convect convert and self-clean features to program a delayed timed bake or delayed self- cleaning cycle.

self-clean ??? Use to set a 2, 3 or 4 hour self-clean cycle.

set clock pad???

Use to set the time of day.

oven light

???Use to turn the oven light ON and OFF.

All of the features listed have minimum and maximum time or temperature settings that may be entered into the control. An ENTRY acceptance beep will sound each time a control pad is touched (the Oven Lockout pad is delayed by 3 seconds).

An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature.

Setting the clock

When the range is first powered up, ???12:00??? will flash in the display (See Fig. 1).

NOTE

It is recommended to always set the clock for the correct time of day before using the appliance. The clock cannot be changed whenever any timed or delayed time feature is active.

Fig. 1

SETTING OVEN CONTROLS

Setting 12 or 24 hour display modes

The clock display mode allows you to choose between 12 or 24 hr mode. The factory pre-set clock display mode is 12 hr. See the example below to change the default mode to 24 hr display.

1.Press and hold set clock for 6 seconds.

2.Press self-clean

to toggle between ???12 Hr dAY??? or ???24 Hr dAY??? display modes (See Figs. 4 & 5).

3.Press start to accept.

Changing oven temperature display

The oven control is preset to display ??F (Fahrenheit) when shipped from the factory.

Changing between continuous bake setting or 6-Hour Energy Saving feature

The oven control has a factory preset built-in 6 Hour Energy Saving feature that will turn off the oven if the oven is left on for more than 6 hours. The control can be programmed to override this feature to continuously bake.

To turn off 6-Hour Energy saving mode:

To change the temperature to display ??C (Celsius) (oven should not have bake or self-clean active when setting this feature):

1.Press and hold broil for 6 seconds.

2.Press self-clean to toggle

1.Press and hold timer on???off for 6 seconds.

2.Press self-clean

to toggle between ???6 Hr OFF??? (Fig. 2) or ???StAY On??? (Fig. 3). Select ???StAY On??? to turn off 6-Hour Energy Saving mode.

3.Press start to accept.

between ???FAhrn ht??? or ???CELSIUS??? temperature display modes (Figs. 6 & 7).

If Celsius display is needed, select ???CELSIUS???.

3. Press start to accept.

SETTING OVEN CONTROLS

Setting a silent control panel

Silent mode allows the oven control to operate without sounds. The control may be programmed for silent operation and later returned to operating with all the normal sounds.

1.Press and hold

delay start for 6 seconds.

2.Press self-clean

to toggle between ???bEEP On??? or ???bEEP OFF???. Select ???bEEP OFF??? for silent mode. (Figs. 1 & 2)

3.Press start to accept

Setting oven lockout

The control may be programmed to lock the oven door and lockout the oven control pads.

NOTES

DO NOT attempt to open the oven door while the

???door Loc??? (door lock) message is visible. Allow 15 seconds for the oven door to completely lock. Once the oven door has locked, the current time of day will reappear in the display. If a control pad is pressed when the oven lockout feature is active the control may triple beep which indicates the keypad action is not available when the oven lockout is active.

14

Fig. 3

Setting the minute timer

The timer allows you to track your cooking times without interferring with the cooking process. The timer may be set from 1 minute up to 11 hours and 59 minutes.

NOTES

The minute timer will display hours and minutes until 1 hour remains on the timer. Once less than 1 hour remains, the display will count down in minutes and seconds. Once the timer has less than 1 minute remaining only seconds will display.

The minute timer DOES NOT start or stop the cooking process. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or while using any of the other oven features.

When the minute timer is in use during a cooking process, the minute timer will be shown in the display. To view the status of other features, press the pad once for the other feature to view the status of that feature.

Add a minute feature

Use the add 1 minute feature to set additional minutes to the timer. Each press of the key pad will add 1 additional minute. If add a minute key pad is pressed when the timer is not active, the timer will begin counting down from 1 minute.

To add 2 additional minutes to the active timer:

Setting quick preheat

Use the quick preheat feature when using single rack baking to quickly heat the oven to bake temperatures. Use this feature only for standard baking. A reminder tone will sound indicating when to place the food in the oven.

When the oven is finished preheating quick preheat will become just like the bake feature and continue to bake until cancelled.

To set quick preheat with a default oven set

1.Press quick preheat.

2.Press start (See Fig. 1).

Fig. 1

Setting bake

Use the bake feature to cook most food items that require normal cooking temperatures. A reminder tone will sound once the oven reaches the set temperature. Bake can be set at any temperature from 170??F to 550??F.

To set bake using a default temperature of 350??F:

To set bake for oven temperature of 425??F: StepPress

1.Press bake.

2.Enter 425.

3.Press start

NOTES

The oven will bake no longer than 6 hours from the last time the oven door was opened.

If you wish to continuously bake, see ???Changing between continuous bake setting or 6-Hour Energy Saving feature??? for further information.

SETTING OVEN CONTROLS

Setting bake time

Use the timed bake feature to automatically turn the oven off after a desired length of time.

WARNING

FOODPOISONINGHAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.

When the set bake time runs out:

1."END" will appear in the display window and the oven will shut-off automatically.

2.The control will beep 3 times every 30 seconds as a reminder until the cancel key pad is pressed.

NOTES

The default maximum bake time setting is 6 hours.

After the bake time feature has been activated, press the bake time pad to display the bake time remaining.

The bake time feature may be set with the convect bake and convect roast features. Bake time will not operate with the broil feature.

15

To program oven for delay start time and to shut-off automatically

The delay start feature allows you to set a start and end time to the cooking process. Prior to setting a delay start, be sure the time of day is set correctly. If the delay start needs to be set more than 12 hours in advance (12-24 hours), the control must first be programmed for 24 hour display mode. See ???Setting 12 or 24 hour display modes??? section.

When the set bake time runs out:

1."END" will appear in the display window and the oven will shut-off automatically (See Fig. 2).

2.The control will beep 3 times every 30 seconds as a reminder until the cancel key pad is pressed.

WARNING

FOODPOISONINGHAZARD.Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.

To program the oven for a delay start and to shut-off automatically (example for baking at 375??F for 50 minutes and starting at 5:30):

1. Press bake time.

2. Enter 50 mintues.

3. Press start.

4. Press delay start (See Fig. 1).

5. Enter 530.

6. Press and hold start.

7. Enter 375.

8. Press start.

NOTES

After the delay start feature has activated and started the cooking process, press the bake time pad to display the bake time remaining.

The delay start feature may be used with the convect or convect convert cooking features. Bake time will not operate when using the broil feature.

Convect (all models)

Benefits of the convect features

???Foods may cook up to 25 to 30% faster, saving time and energy.

???Multiple rack baking.

???No special pans or bakeware needed.

Convect uses a fan to circulate the oven's heat uniformly and continuously around the oven. This improved heat distribution allows for fast, even cooking and browning results. It also gives better baking results when using two racks at the same time.

Heated air flows around the food from all sides, sealing in juices and flavors. Breads and pastry brown more evenly. Layer cakes will have better results using the bake pad.

Most foods baked in a standard oven can be cooked faster and more evenly with the convect feature.

Suggestions for convect baking

1.For optimum cooking results it is recommended to preheat the oven when baking foods such as cookies, biscuits and breads.

2.Reduce oven temperature 25??F from recipe???s recommended oven temperature. Follow the remainder of the recipe???s instructions using the minimum recommended cook time.

3.When using 2 oven racks at the same time, place in positions 2 & 5 for best results (Fig. 1).

Convect bake (all models)

To set convect (convection bake) with a default oven set temperature of 350??F:

Fig. 2

NOTES

When using convection bake cook time reductions may vary depending on the amount and type of food being cooked.

The convection fan will take 6 minutes to begin rotating once convection bake or convection roast has been activated.

SETTING OVEN CONTROLS

6

5

4

3

2

1

Fig. 1

Convect roast (all models)

Meats cooked with convect roast will be juicer and poultry will be crisp on the outside while staying tender and moist on the inside.

NOTE

When choosing between the convect features, use the convect key pad to toggle between the convect bake or convect roast choices.

Suggestion for convect roasting

1.Preheating is not necessary when roasting foods using convect roast.

2.Since convect roast cooks food faster, reduce the cook time by 25% from the recommended cook time of your recipe (check the food at this time). If necessary, increase cook time until the desired doneness is obtained.

3.Do not cover foods when dry roasting - this will prevent the meat from browning properly.

To set convect roast (convection roast) with a default oven set temperature of 350??F:

1.Press convect.

2.Press convect again.

3.Press start (See Fig. 3).

Fig. 3

SETTING OVEN CONTROLS

Setting convect (convection) convert

The convect convert feature allows you to convert any baking recipe using the convect (convection) feature. The control uses the normal recipe settings and adjusts to a lower temperature for convection baking.

Convect convert can only be used with the convect bake feature.

To set convect using default oven set temperature of 350??F and adding the convect convert:

1.Press convect.

2.Press convect convert.

Fig. 2

NOTES

When convect convert is used with a cook time or a delay start setting, the convect convert feature will display a "CF" for check food when the bake time is 75% complete (See Fig. 2). At this time the oven control will sound 1 long beep at regular intervals until the set cook time has finished.

The convection fan will take 6 minutes to begin rotating once the convect convert feature has been activated.

When using convect convert cook time reductions may vary depending on the oven set temperature.

The minimum amount of cook time allowed using the convect convert feature with a bake time or a delay time bake setting is 20 minutes.

Layer cakes will have better results using the normal bake feature.

Broil

Use the broil feature to cook meats that require direct exposure to flame heat for optimum browing results. When broiling always remember to arrange the oven racks while oven is still cool. Position the oven rack as suggested in the broil settings table (See Fig. 4).

1.Place the broiler insert on the broil pan, then place meat on the insert. Remember to follow all warnings and cautions.

2.Arrange the interior oven rack to recommended position (Figs. 1 & 4). For optimum browning results, preheat oven for 5 minutes before adding food.

3.Be sure to place food and pan directly under upper oven burner.

Close the oven door.

4. Press broil.

5. Press start (See Fig. 3)

WARNING

Should an oven fire occur, close the oven door and turn the oven OFF. If the fire continues, use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive.

SETTING OVEN CONTROLS

Insert

6

5

4

Broil pan

Fig. 2

Fig. 1

Fig. 3

CAUTION

The broiler pan and the insert (some models) allows grease to drain and be kept away from the high heat of the broiler. DO NOT use the pan without the insert (Fig. 2). DO NOT cover the insert with foil; the exposed grease could ignite. DO NOT use the broil pan without the insert or cover the insert with aluminum foil. The exposed fat could ignite. To insure proper results use ONLY Electrolux Home Products, Inc. approved broil pan & insert.

NOTE

Always pull the oven rack out to the stop position before turning or removing the food.

SETTING OVEN CONTROLS

Setting pizza feature

For your convenience the pizza feature provides 2 different settings. You may use the pizza feature whether starting with fresh or frozen pizza.

To set the pizza feature:

NOTES

Use only 1 oven rack for best results when using the pizza feature.

The pizza setting is not timed. Be sure to monitor the time needed to finish cooking the pizza.

Follow package directions for cook time. Check pizza at the minimum recommended time.

The preset oven temperature for the frozen pizza setting is 425??F and the fresh pizza is 400??F.

Setting chicken nuggets feature

Use the chicken nuggets feature to cook convenience style chicken nuggets. The user may change the temperature or bake time at any time to fit their needs. Once the 20 minute preset cook time is finished the chicken nuggets feature will automatically set the oven to the keep warm feature for 3 hours. You may cancel the keep warm at any time if not needed.

2. Press start (See Fig. 3)

Fig. 3

20

Setting chicken nuggets feature (cont???d)

NOTES

After 20 minutes of cook time the chicken nuggets feature will automatically start the keep warm feature. If keep warm is not necessary, press cancel at any time to stop keep warm.

The pizza and chicken nuggets feature uses the convection fan. The fan will take 6 minutes to start rotating once these features have been activated.

Setting keep warm

The keep warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the keep warm feature will shut the oven off automatically.

The keep warm feature may be used without any other cooking operations or may be used after cooking has finished using bake time and or delay start.

WARNING

FOODPOISONINGHAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.

Fig. 4

NOTE

The keep warm feature will automatically turn the oven off after 3 hours.

Adjusting the oven temperature

Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed.

The oven temperature my be increased +35??F (+19??C) or decreased -35??F (-19??C) from the factory settings.

Example: increase the oven temperature by 30??F: StepPress

1.Press and hold bake for 6 seconds.

2.Enter 30.

3.Press start.

Example: decrease the oven temperature by 30??F:

1.Press and hold bake for 6 seconds.

2.Enter 30.

3.Press self-clean.

4.Press start.

NOTES

Oven temperature adjustments made will not affect the broil or self-cleaning feature temperatures.

If the temperature shows an adjustment of -30??F, and a +30??F adjustment is needed, you can toggle between the (-) or (+) in the display by pressing self clean.

DO NOT USE oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40 degrees from actual temperatures.

SETTING OVEN CONTROLS

Operating the oven light

The interior oven light will automatically turn ON when the oven door is opened.

whenever the oven door is closed.

The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.

To change the interior oven light, see "Changing the oven light" in the Care & Cleaning section.

21

SETTING OVEN CONTROLS

To Set the Sabbath Feature (for use on the

Jewish Sabbath & Holidays)

For further assistance, guidelines for proper usage and a complete list of models with the Sabbath feature, please vist the web at http:\\www.star-k.org.

WARNING

FOODPOISONINGHAZARD.Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.

The bake time and delay start pads are used to set the Sabbath feature. The Sabbath feature may only be used with the bake feature. The oven temperature may be set higher or lower after setting the Sabbath feature (the oven temperature adjustment feature should be used only during Jewish Holidays), however the display will not be visible and no audible tones will be provided when a change occurs.

Once the oven is properly set using the bake feature with the Sabbath mode active, the oven will remain continuously ON until cancelled. The Sabbath mode will override the factory preset 6-Hour Energy Saving feature.

If the oven light(s) are needed during the Sabbath, press the oven light pad before activating the Sabbath feature. Once the oven light is turned on and the Sabbath feature is active, the oven light will remain on until the Sabbath feature is turned OFF. If the oven light needs to be off, be sure to turn the oven light off before activating the Sabbath feature.

It is recommended that any oven temperature change with the Sabbath feature active be followed with 2 presses of the start pad. This will insure the oven remains ON even if the attempt to set the oven temperature was lower or higher than the oven control can accept. If the oven temperature is set incorrectly, the oven temperature will default to 170??F or 550??F. Try to set the desired oven temperature again.

22

To program the oven for 350??F bake and activate the Sabbath feature:

1.Be sure that the clock is set with the correct time of day.

2.Arrange the oven racks and place the food in the oven and close door.

3. Press bake.

4. Press start.

5.If a timed bake or delayed timed bake is needed

then enter the time in this step. If not, skip this step and continue to step 6. Refer to the bake time or delay start instructions. Remember the oven will shut-off after completing a

timed bake or delay start and therefore may only be used once during the Sabbath/Jewish Holidays. The maximum delay start time

is 11 hours & 59 minutes.

Fig. 1

To Set the Sabbath Feature (cont???d)

To turn off the oven but keep the Sabbath feature active:

Press cancel.

To turn off the Sabbath feature:

bake time and delay start pads for at least 3 seconds. The control will beep and SAb will disappear from the display. The oven is no longer programmed for the

Sabbath feature.

What to do during a power failure or power interruption after the Sabbath feature was activated:

Should you experience a power failure or interruption, the oven will shut-off. When power is restored the oven will not turn back on automatically. The oven will remember that it is set for the Sabbath and the oven display will show the message ???SF??? for Sabbath failure (Fig. 1).

Fig. 1

The food may be safely removed from the oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath/Holidays.

After the Sabbath observance turn OFF the Sabbath feature. At the same time press and hold both the

+ pads for at least 3 seconds.

SF will disappear from the display and the oven may be used with all normal functions.

SETTING OVEN CONTROLS

NOTES

If a delay start time longer than 12 hours (maximum of 24 hours) in advance is desired, set the display mode for the 24 hour setting. For detailed instructions see the

section ???Setting 12 or 24 hour display modes???.

It is not advised to attempt to activate any other program feature except BAKE while the Sabbath feature is active. ONLY the following key pads will function correctly with the Sabbath feature: 0-9 number pads, bake, start & cancel. ALL OTHER KEYPADS should not be used once the Sabbath feature is activated.

You may change the oven temperature once baking has started. Press bake , enter the oven temperature change (170 to 550F??) and press start (for Jewish Holidays only). Remember that the oven control will no longer beep or display any further changes once the oven is set for the Sabbath feature.

If the keep warm feature was activated and the Sabbath feature was set the keep warm feature will automatically shut-off the oven off after 3 hours.

SELF-CLEANING

Self-cleaning

A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away with a damp cloth.

Your oven allows you to set 3 different self-cleaning cycle durations. A 3-hour cleaning time is best used for normal cleaning; 2-hour time for light soils and a 4-hour time option for heavier burnt-on soils.

IMPORTANT

Adhere to the following self-clean precautions:

???DO NOT use oven cleaners or oven protective coatings in or around any part of the oven interior.

???DO NOT clean the oven door gasket. The woven material of the oven door gasket is essential for a good seal. Care should be taken not to rub, damage or remove the gasket.

???DO NOT use any cleaning materials on the oven door gasket. Doing so could cause damage (See Fig. 1).

???Remove the broiler pan and insert, all utensils andANYALUMINUMFOIL.Theseitemscannot withstand high cleaning temperatures and will melt.

???Completely remove ALL OVEN RACKS and ANY ACCESSORIES. If the oven racks are not removed they will loose their special coating properties and no longer slide in and out of the oven cavity effortlessly.

???Remove any excessive spillovers. Any spills on the oven bottom should be wiped-up and removed before starting the self-cleaning cycle. To clean, use hot, soapy water and a cloth. Large spillovers can cause heavy smoke or fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may leave a dull spot even after cleaning.

???Clean any soil from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom. These areas heat sufficiently to burn soil on. Clean with soap and water. These areas are shown in white (See Fig. 1).

CAUTION

During the self-cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave small children unattended near the appliance.

The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is completed. The oven may still be VERY HOT.

Fig. 1

Setting a self-clean cycle or a delayed start self-clean cycle

Examples: To start an immediate self-cleaning cycle and/or how to add a delay start time of 9:00 o???clock and shut-off self-clean automatically:

1.Be sure the control is set with the correct time of day, ALL the oven racks are removed and the oven door is closed.

Go to step 5 if you wish to start the self-clean immediately.

Finish steps 2 thru 6 if setting a delay start self-clean.

2.Press delay start.

3.Enter 9 0 0.

4.Press start.

5.Press self clean once for a 3-hour

clean time, press self clean twice for 4-hour clean and press 3 times

for a 2-hour self-clean cycle time.

6.Press start.

IMPORTANT

As soon as the controls are set, the motor driven door lock will begin to close automatically. ???door Loc??? will appear in the display (See Fig. 1). DO NOT open the oven door while ???door Loc??? is on (allow 15 seconds for the oven door to completely lock).

Once the door has locked ???CLn??? will appear in the display indicating the oven will begin the self-clean process (Fig. 2).

SELF-CLEANING

When the self-clean cycle has completed:

1.The time of day and ???Hot??? will appear in the display window (See Fig.3).

2.Once the oven has cooled down for about 1 hour and ???Hot??? is no longer displayed the ???door OPn??? message should appear (Fig. 4). When this message turns off the oven door may be opened. Use caution and avoid possible burns when opening the door after the self- cleaning cycle has completed. The oven may still be

VERYHOT.

If it becomes necessary to stop a self-clean cycle once it has been activated:

1.Press cancel.

2.If the self-clean cycle has heated the oven to a high temperature, allow enough time for the oven to cool and for the ???door OPn??? message to appear (Fig. 4). When this message turns off the oven door may be opened.

3.Restart the self-clean cycle once all conditions have been corrected.

CAUTION

To avoid possible burns use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the self-cleaning cycle has completed. The oven may still be

VERYHOT.

NOTES

Whenever the self-clean feature is active you may check the amount of time remaining in the self-clean cycle by

pressing the pad once. The oven door will be

locked until the range has cooled sufficiently. You will need to allow about 1 additional hour to the time displayed before you can open the oven door.

When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

25

???Chrome control panel (some models)

???Decorative trim (some models)

Before cleaning the control panel, turn all controls to OFF and remove the control knobs. To remove, pull each knob straight off the shaft. Clean using hot, soapy water and a dishcloth. Rinse with a clean water using a dishcloth. Be sure to squeeze excess water from the cloth before wiping the panel; especially when wiping around the controls. Excess water in or around the controls may cause damage to the appliance.To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place.

???Porcelain enamel broiler pan and broiler pan insert (if equipped)

???Door liner & body parts

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all cleaners or the porcelain may become damaged during future heating. Do not use spray oven cleaners on the cooktop.

???Cooktop surface and contoured well areas, surface burner heads, caps and burner grates

See Cleaning the cooktop and surface burners instructions provided in the following Care & Cleaning section.

Cleaning the cooktop and surface burners

CAUTION

To avoid possible burns use care when cleaning the cooktop. DONOTattempt to clean the cooktop whenever the cooktop or burner heads are still hot.

To avoid possible burns DO NOT attempt any of the cleaning instructions provided below before turning OFF all of the surface burners and allow them to cool.

The cooktop and surface burners are designed to make cleaning easier. Since cooktop surface burners are sealed, cleanups are easy when spillovers are cleaned up immediately. Routinely clean the cooktop. Wipe with a clean, damp cloth and wipe dry to avoid scratches. The contoured well areas and burner drip pans (some models) should be frequently cleaned also.

Keeping the burner head ports and slots clean will prevent improper ignition and an uneven flame. Refer to the following sections for further instructions.

To clean the burner head ignition ports

Each burner head has a small ignition port located as illustrated. Should you experience ignition problems it may be that this port hole is partially blocked with soil. With the burner head in place, use a small wire gauge needle or the end of a paper clip to clear the ignition port.

To clean the surface burner heads

For proper gas flow it may be necessary to clean the burner head and slots. To clean, first use a clean DAMP cloth to soak up any spills. Remove any food from between the burner slots using a small non-abrasive brush like a toothbrush and afterwards wipe up using a damp cloth. For stubborn soils located in the slots, use a small-gauge wire or needle to clean.

To clean the recessed and contoured well areas of the cooktop

If a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry.

To clean the burner grates, burner caps & burner drip pans (some models)

Use a soap-filled scouring pad or a mild abrasive cleanser to clean the burner grates, burner caps and surface burner drip pans (if equipped).

CARE & CLEANING

ignition port

slots

orifice port

Fig. 1 - Cooktop burner head

IMPORTANT

The surface burner heads are secured to the cooktop and must be cleaned in place on the cooktop.

For proper flow of gas and ignition of the burner ??? DO

NOT allow spills, food, cleaning agents or any other material to enter the gas orifice holder opening. Always keep the surface burner cap and surface burner head in place whenever a surface burner is in use.

Replacing the oven light

The light bulb is located at the rear of the oven and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.

To replace the oven light bulb:

1.Turn electrical power off at the main source or unplug the range.

2.Press wire holder to one side to release the glass shield that covers the light bulb.

3.Replace bulb with a new 40 watt appliance bulb.

4.Replace glass shield over bulb and snap wire holder back into place.

5.Turn power back on again at the main source (or plug the appliance back in).

6.The clock will then need to be reset. To reset, see ???Setting the clock??? in this Use & Care Guide.

CAUTION

Be sure the range is unplugged and all parts are COOL before replacing ovenlight.Weara leather-faced gloveforprotection against possible broken glass.

CARE & CLEANING

Removing and replacing the lift-off oven door

CAUTION

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

To remove oven door:

1.Open oven door completely (horizontal with floor - See Fig. 1).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Fig. 2). A tool such as a small flat- blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Fig. 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Fig. 4).

To replace oven door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Fig. 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Fig. 4). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door (horizontal with floor - See Fig. 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (See Fig. 2) to the locked position.

5.Close the oven door.

Special door care instructions - Most oven doors contain glass that can break.

Readthefollowingrecommendations:

1.Do not close the oven door until all the oven racks are fully in place.

2.Do not hit the glass with pots, pans, or any other object.

3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Oven door hinge locations

with oven door fully open.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Surface burner flame is orange.

???Dust particles in main gas line. Allow the burner to operate a few minutes until flame turns blue. In coastal areas, a slightly orange flame is unavoidable due to salt air.

Soil not completely removed after self- cleaning cycle.

???Failure to clean bottom, front top of oven, frame of oven or door area outside oven seal. These areas are not in the self-cleaning area, but get hot enough to burn on residue. Clean these areas before the self-cleaning cycle is started. Burned-on residue can be cleaned with a stiff nylon brush and water or a nylon scrubber. Be careful not to damage the oven gasket.

Oven control panel beeps & displays any F code error (for example F10).

???Oven control has detected a fault or error condition. Press CANCEL to clear the display & stop beeping. Try the bake or broil feature again. If the F code error repeats, remove power from appliance, wait 5 minutes and then repower appliance and set clock for the time of day. Try the bake or broil feature again. If the fault recurs, record fault and call for service.

Oven light does not work.

???Be sure the light is secure in the socket. Also see ???Changing & replacing the oven light??? section.

Cannot move appliance easily. Appliance must be accessible for service.

???Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.

???Carpet interferes with appliance. Provide sufficient space so appliance can be lifted over carpet.

Exclusions

If You Need

Service

This warranty does not cover the following:

1.Products with original serial numbers that have been removed, altered or cannot be readily determined.

2.Product that has been transferred from its original owner to another party or removed outside the USA or Canada.

3.Rust on the interior or exterior of the unit.

4.Products purchased "as-is" are not covered by this warranty.

5.Food loss due to any refrigerator or freezer failures.

6.Products used in a commercial setting.

7.Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions.

8.Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

9.Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory.

10.Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts.

11.Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.

12.Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc.

13.Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER???S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT

REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,

INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR.

ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS

PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN

LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE

DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO

YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER

RIGHTS THAT VARY FROM STATE TO STATE.

Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the addresses or phone

numbers below.