TA B L E O F C O N T E N T S

B .Rev 2011) (May 318205314

Product Registration

Register Your Product

The PRODUCT

REGISTRATION CARD should be ???lled in completely, signed and returned to Electrolux Major Appliances.

Serial Plate Location

Please record your model and serial numbers below for future reference.

Model Number:

Serial Number:

Purchase Date:

Congratulations on your purchase of a new appliance! At Electrolux Major Appliances, we are very proud of our product and are completely committed to providing you with the best service possible. Your satisfaction is our number one priority.

We know you???ll enjoy your new appliance and Thank You for choosing our product. We hope you consider us for future purchases.

PLEASE CAREFULLY READ AND SAVE THESE

INSTRUCTIONS

This Use & Care Manual contains general operating instructions for your appliance and feature information for several models. Your product may not have

all the described features. The graphics shown are representative. The graphics on your appliance may not look exactly like those shown. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.

???NOTE

Please attach sales receipt here for future reference.

Read all instructions before using this appliance.

Save these instructions for future reference.

DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING

This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.

CAUTION

This symbol will help alert you to situations that may cause bodily injury or property damage.

IMPORTANT

IMPORTANT indicates installation, operation or maintenance information which is important but not hazard-related.

???Remove all tape and packaging wrap before using the appliance. Destroy the carton and plastic bags after unpacking the appliance. Never allow children to play with packaging material. Do not remove the wiring label and other literature attached to the appliance. Do not remove model/serial number plate.

???Proper Installation. Be sure your appliance is properly installed and grounded by a quali???ed technician in accordance with the National

Electrical Code No. 70 - latest edition in the

United States, or CSA C22.1, Part 1 in Canada, and local code requirements. Install only per installation instructions provided in the literature package for this appliance.

Ask your dealer to recommend a quali???ed technician and an authorized repair service. Know how to disconnect the electrical power to the appliance at the circuit breaker or fuse box in case of an emergency.

CAUTION

Electronic controllers can be damaged by cold temperatures. When you use your appliance for the ???rst time, or if it has not been used for a long period of time, make sure that it has been exposed to a temperature above 0??C/32??F for at least 3 hours before connecting it to the power supply.

WARNING

??? All appliance can tip.

??? Injury to persons could result.

??? Install anti-tip bracket packed with your appliance.

??? See Installation Instructions.

To reduce the risk of tipping, the appliance must be secured by properly installed anti-tip bracket provided with the unit. Refer to the Installation

Instructions for proper anti-tip bracket installation.

???User Servicing. Do not repair or replace any part of the appliance unless speci???cally recommended in the manuals. All other servicing should be done only by a quali???ed technician to reduce the risk of personal injury and damage to the appliance.

???Never modify or alter the construction of an appliance such as removal of panels, wire covers or any other permanent part of the appliance.

???Storage on Appliance. Flammable materials should not be stored near surface units.

This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as

???ammable liquids. Do not store explosives, such as aerosol cans, on or near the appliance. Flammable materials may explode and result in ???re or property damage.

???Remove the oven door from any unused appliance if it is to be stored or discarded.

WARNING

Stepping, leaning, sitting or pulling down on the door of this appliance can result in serious injuries and may also cause damage to the appliance. Do not allow children to climb or play around the appliance.

???Storage in or on Appliance???Flammable materials should not be stored in an oven. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as ???ammable liquids.

Do not store explosives, such as aerosol cans, in or near the appliance.

WARNING

Do not use the oven for storage.

CAUTION

Do not store items of interest to children in the cabinets above the appliance. Children climbing on the cooktop to reach items could be seriously injured.

???Do not leave children alone. Children should not be left alone or unattended in the area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

???DO NOT TOUCH INTERIOR OVEN ELEMENTS

OR INTERIOR SURFACES OF THE OVEN UNTIL THEY HAVE COOLED. The oven heating elements may be hot even though the elements are dark in color. Areas near the elements may become hot enough to cause burns. During and after use, do not touch, or

let clothing or other ???ammable materials touch these areas until they have had suf???cient time to cool. Among these areas are the oven vent openings, the surfaces near these openings, oven door and window.

???Wear Proper Apparel. Loose-???tting or hanging garments should never be worn while using the appliance. Do not let clothing or other ???ammable materials contact hot surfaces.

WARNING

Never use your appliance for warming or heating the room.

???Do Not Use Water or Flour on Grease Fires. Smother the ???re with a pan lid, or use baking soda, a dry chemical or foam-type extinguisher.

???When heating fat or grease, watch it closely. Fat or grease may catch ???re if allowed to become too hot.

???Use Only Dry Pot holders. Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let the pot holders touch hot surface units. Do not use a towel or other bulky cloth instead of a pot holder.

???Do Not Heat Unopened Food Containers. Buildup of pressure may cause the container to burst and result in injury.

IMPORTANT

Do not attempt to operate the appliance during a power failure. If the power fails, always turn off the unit. If the unit is not turned off and the power resumes, the appliance will not operate and an error message will be displayed.

IMPORTANT SAFETY INSTRUCTIONS FOR

USING YOUR OVEN

???Use Care When Opening an Oven Door???Stand to the side of the appliance when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven.

???Keep Oven Vent Ducts Unobstructed. The wall oven is vented at the center trim under the control panel. Touching the surfaces in this area when the oven is operating may cause severe burns. Also, do not place plastic or heat-sensitive items near the oven vent. These items could melt or ignite.

???Placement of Oven Racks. Always place oven racks in desired location while oven is cool. Remove all utensils from the rack before removing rack. If rack must be moved while oven is hot, use extreme caution. Use pot holders and grasp the rack with both hands to reposition. Do not let pot holders contact the hot oven element or interior of the oven.

???Do not use a broiler pan without its insert. Broiler pan and grid allow dripping fat to drain and be kept away from the high heat of the broiler.

???Do not cover the broiler grid or oven bottom with aluminum foil. Exposed fat and grease could ignite.

???Do not touch a hot oven light bulb with a damp cloth. Doing so could cause the bulb to break. Disconnect the appliance or shut off the power to the appliance before removing and replacing the bulb.

???Protective liners???Do not use aluminum foil to line the oven bottom. Only use aluminum foil as recommended in this manual. Improper installation of these liners may result in risk of electric shock, or ???re.

IMPORTANT SAFETY INSTRUCTIONS FOR

CLEANING YOUR OVEN

???Clean the appliance regularly to keep all parts free of grease that could catch ???re. Exhaust fan ventilation hoods and grease ???lters should be kept clean. Do not allow grease to accumulate. Greasy deposits in the fan could catch ???re. Refer to the hood manufacturer's instructions for cleaning.

???Cleaners/Aerosols???Always follow the manufacturer's recommended directions for use. Be aware that excess residue from cleaners and aerosols may ignite causing damage and/or injury.

???Clean in the self-cleaning cycle only the parts of the appliance listed in this Owner's Guide. Before using the self-cleaning cycle of the appliance, remove all utensils stored in the appliance.

???Do not clean the oven door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

???Do not use oven cleaners. No oven cleaner or oven liner protective coating of any kind should be used in or around any part of the appliance.

CAUTION

The health of some birds is extremely sensitive to the fumes given off during the self-clean cycle of any wall oven. Move birds to another well ventilated room.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

Oven Vent Location

The oven is vented at the center trim. When the oven is on, warm air is released through the vent. This venting is necessary for proper air circulation in the oven and good baking results.

Some models are equipped with a blower which runs in baking and self-cleaning mode to keep all internal components at a cool temperature.

The blower may keep running even if the oven has been turned off, until the components have cooled down.

Air Circulation in the Oven

If using 1 rack, place in center of oven. If using multiple racks, stagger cookware as shown.

For best air circulation and baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides or back of the oven cavity. The hot air must circulate around the pans and cookware in the oven for even heat to reach around the food.

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when using the oven.

To remove an oven rack, pull the rack forward until it stops. Lift up front of rack and slide out.

To replace an oven rack, ???t the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.

Recommended Rack Position

4

3

2

1

Rack positions

???NOTE

Always use caution when removing food from the oven.

1.Bake Pad??? Used to enter the normal baking mode temperature.

2.Broil Pad???Used to select the variable broil function.

3.Clean Pad???Used to select the self-cleaning cycle.

4.Keep Warm Pad??? Used to set the Keep Warm feature.

5.Bake Time Pad??? Used to enter the length of the baking time.

6.Start Time Pad??? Used to set the desired start time for baking. Can be used with BAKE TIME to program a delayed bake cycle.

7.Up arrow pad???Used along with the function pads to select oven temperature, time of day and minute timer.

8.Down arrow pad???Used along with the function pads to select oven temperature, time of day and minute timer.

9.Clock Pad??? Used to set the time of day.

10.Timer On???Off Pad??? Used to set or cancel the minute timer. The minute timer does not start or stop cooking.

11.Oven Interior Light Pad??? Used to turn oven interior light ON and OFF.

12.Clear Pad??? Used to clear any function previously entered except the time of day and minute timer. Push Clear pad to stop cooking.

13.Oven, Preheat & Lock lights??? The ???oven??? light indicates that the oven is functioning. The ???Preheat??? light will glow when the oven is ???rst set to operate, or if the desired temperature is reset higher than the actual oven temperature. The ???Door Locked??? light will

???ash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks.

14.Feature indicator lights??? These light show which feature is in use.

???NOTE

Push buttons or pads may be shaped differently.

8

To operate the interior oven light

The interior oven light(s) will automatically turn ON when the oven door is opened. Press the Oven light pad to turn the interior light(s) ON and OFF whenever the door is closed.

The oven light is locates at the upper left or right rear wall of the oven interior and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use. To change the interior oven light, see changing the Oven Light.

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation.

To tell if your oven is set for normal or silent operation push and hold Start time pad for 7 seconds. ???- -??? or ???SP??? appears in the display. Within 5 seconds, press the Up or Down arrow pad to switch between normal sound operation and silent operation mode. The display will show either ???- -??? or ???SP???. Wait 5 seconds to return to normal operating mode.

???NOTE

If ???SP??? appears, the control will operate with normal sounds and beeps. If ???- -??? appears, the control is in the silent operation mode.

Temperature Conversion (Fahrenheit/

Celsius)

The electronic oven control is set to operate in ??F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170??F to 550??F (77??C to 288??C).

To change the temperature to ??C (Celsius) or from ??C to ??F (control should not be in a Bake or Clean mode):

1.Press and hold Broil pad for 7 seconds until ??F or ??C appears in the display.

2.Press the Up or Down arrow pad to change ??F to ??C or ??C to ??F.

3.Wait 5 seconds to accept the changes or press Clear off pad to accept the changes.

Changing between 12 or 24 Hour Time of Day Display

1.Press and hold the Clock pad for 7 seconds. After 7 seconds, ???12Hr??? or ???24Hr??? will appear in the display and the control will beep once.

2.Press the Up or Down arrow pad to switch between the 12 and 24 hour time of day display. The display will show either ???12Hr??? or ???24Hr???.

3.Wait 5 seconds or press the Clear off pad to return to the time of day display.

4.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

SETTING OVEN CONTROLS

To set the Clock

???NOTE

The time of day must ???rst be set in order to operate the oven.

When the range is ???rst plugged in, or when the power supply to the appliance has been interrupted, the display will ???ash ???12:00???.

1.Press the Clock pad once (do not hold pad down).

2.Within 5 seconds, push and hold the Up or Down arrow pad until the correct time of day appears in the display.

3.Press the Clock pad to accept the new time of day. If the Clock pad is not pressed, the timer will return automatically to the new time of day after 7 seconds.

???NOTE

The clock cannot be changed while the oven is in used.

To Set the Minute Timer

1.Press the Timer On???Off pad.

2.Press the Up arrow pad to increase or Down arrow pad to decrease the time in one minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

3.The display shows the timer count down in minutes if more than 1 hour remains. When less than 1 hour remains, the display will count down in seconds.

4.When the set time has run out, the timer will beep 3 times. It will continue to beep 3 times every 8 seconds until the Timer On???Off pad is pressed.

???NOTE

???The indicator light located above the Timer On???Off pad will glow while the minute timer is active.

???The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other mode, the minute timer will be shown in the display. To view other functions, press the function pad for that mode.

To Cancel the Minute Timer before the set time has run out: Press the Timer On???Off pad.

SETTING OVEN CONTROLS

To Set Control for Continuous Bake or 12

Hour Energy Saving

The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

To set control for continuous baking:

1.Press and hold the Timer On???Off pad for 7 seconds until a tone is heard.

2.Within 5 seconds, press the Up or Down arrow pad to switch between Continuous Bake and 12 Hour Energy Saving mode. The display will show either ??????

??? hr??? or ???12hr???.

If ???- - hr??? appears, the oven will be set to continuous baking. If ???12hr ??? appears, the oven is set to 12 hour energy saving mode.

3.Wait 5 seconds or press the Clear off pad to accept the changes.

To Set Control for Oven Lockout

The control can be programmed to lock the oven door and lock the oven control pads. The Oven Lockout feature prevents the oven from being accidentally turned on. It does not disable the clock, minute timer or the interior oven light.

To Set Control for Oven Lockout feature:

1.Press the Clear off pad and hold for 3 seconds. The

???Door Locked??? indicator light will ???ash and the motor driven door lock will begin to close automatically.

DO NOT open the oven door while the indicator light is ???ashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, ???Loc??? will appear in display.

2.To cancel the Oven lockout feature, press the Clear off pad and hold for 3 seconds. The control will unlock the oven door and resume normal operation.

To Set or Change the Temperature for Baking

???NOTE

The time of day must ???rst be set in order to operate the oven.

The oven can be programmed to bake at any temperature from 170??F to 550??F (77??C to 288??C).

To Set the Controls for Baking:

1.Press the Bake pad.?????? ??? ???????? appears in the display.

2.Within 5 seconds, Press the Up or Down arrow pad. The display will show ???350??F (177??C).??? By holding the Up or Down arrow pad, the temperature can then be adjusted in 5??F (1??C if control is set to display Celsius) increments.

3.8 seconds after the Up or Down arrow pad is released, the oven will begin heating to the selected temperature. When the displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the oven control will beep.

4.To cancel the baking function, press the Clear off pad.

To Change the Oven Temperature after Baking has Started: Press the Up or Down arrow pad to increase

or decrease the set temperature.

Setting Broil

Broiling is a method of cooking tender cuts of meat by direct heat under the broil element of the oven. A beep lets you know when the broil temperature is reached. Be sure you center the broiler pan directly under the broil element for best results.

Arrange oven rack while oven is still cool. Position the rack as needed. The broiler pan and its insert allow dripping grease to drain and be kept away from high heat of the broiler. DO NOT use the pan without its insert. DO NOT cover the insert with foil. The exposed grease could ignite.

CAUTION

Should an oven ???re occur, close the oven door and turn off the oven. If the ???re continues, throw baking soda on the ???re or use a ???re extinguisher. DO NOT put water or ???our on the ???re. Flour may be explosive and water can cause a grease ???re to spread and cause personal injury.

Broiling Tips:

???For optimum browning, preheat the broil element for 5 minutes.

???Broil one side until the food is browned; turn and cook on the second side. Season and serve.

???Always pull the rack out to the ???stop??? position before turning or removing food.

???Always use the broiler pan and its cover when broiling.

It allows the dripping grease to be kept away from the high heat of the broil element (see Figure 1).

???For best broiling results, broil with the oven door in the broil stop position (see Figure 2).

???If using a Searing Grill (available by mail order), preheat the grill for 5 to 10 minutes before placing your meat.

???DO NOT use the broil pan without the insert. DO NOT cover the broil pan insert with foil. The exposed grease could catch ???re.

Accessories available via the enclosed brochure:

Broiler

Insert

Broiler

Pan

Figure 1

To set for broiling:

1.Arrange the oven rack while oven is still cool.

2.Press the Broil pad. ???- -??? will appear in the display.

3.Press the Up or Down arrow pad until the desired broil setting level appears in the display. Press the Up arrow pad for HI broil or the Down arrow pad for LO broil. Most foods may be broiled at the HI broil setting. Select the LO broil setting to avoid excess browning or drying of foods that should be cooked to the well-done stage.

4.Place the insert on the broiler pan, then place the food on the insert. DO NOT use the pan without the insert or cover the insert with aluminum foil. The exposed grease could ignite.

5.Place the pan on the oven rack. Open the oven door to the broil stop position when broiling

(Figure 2).

6.Broil on one side until food is browned. Turn and broil food on 2nd side.

Note: Always pull the rack out to the stop position before turning or removing food.

7.When broiling is ???nished, press the Clear off pad.

Broil Stop

Position

Figure 2

SETTING OVEN CONTROLS

To Set the Timed Bake and Delay Start

Features

The BAKE TIME and START TIME pads operate the features that will turn the oven ON and OFF at the times you select in advance. The oven can be programmed

to start immediately and shut off automatically (Timed Bake) or to begin baking at a later time with a delayed start time (Delay Start).

???NOTE

During Timed Bake the preheat indicator light will function during the preheat operation.

To Program the Oven to Begin Baking Immediately and To Shut Off Automatically (Timed Bake):

1.Be sure that the clock shows the correct time of day.

2.Place the food in the oven.

3.Press the Bake pad. "??? ??? ?????" appears in the display.

4.Within 5 seconds, press the UP or DOWN ARROW pad. The display will show "350??F (177??C)". By holding the Up or Down arrow pad, the temperature can then be adjusted in 5??F increments (1?? if the control is set to display Celsius).

5.Wait 8 seconds to accept the temperature.

6.Press the Bake time pad. "0:00" will ???ash in the display (MIN:SEC) and (HR:MIN) if programmed for more than 60 minutes.

7.Press the Up or Down arrow pad until the desired baking time appears in the display.

8.The oven will turn ON and begin heating.

???NOTE

When the control is set for this function the oven temperature will be displayed. To see the cook time remaining press the Bake time pad and to see the time of day press the Clock pad.

To Program Oven for a Delayed Start Time and to Shut-Off Automatically (Delayed Start Bake):

1.Be sure that the clock shows the correct time of day.

2.Place the food in the oven.

3.Press the Bake pad. "??? ??? ?????" appears in the display.

4.Within 5 seconds, press the Up or Down arrow pad. The display will show "350??F (177??C)." By holding the Up or Down arrow pad, the temperature can then be adjusted in 5??F increments (1?? if the control is set to display Celsius).

5.Wait 8 seconds to accept the temperature.

6.Press the Bake time pad. "0:00" will ???ash in the display (MIN:SEC) and (HR:MIN) if programmed for more than 60 minutes.

SETTING OVEN CONTROLS

7.Press the Up or Down arrow pad until the desired baking time appears.

8.Wait 5 seconds for the control to accept the time.

9.Press the Start time pad. The earliest possible start time will appear in the display.

10.Press the Up or Down arrow pad until the desired start time appears in the display and wait 7 seconds to accept.

11.Once the controls are set, the control calculates the time when baking will start and stop.

12.The oven will turn ON at the delayed start time and begin heating.

???NOTE

When the control is set for a delayed time bake the time of day is displayed until the delayed time bake is reached. When the oven will turn on, the oven temperature will be displayed. To see the cook time remaining press the Bake time pad and to see the time of day press the Clock pad.

When the Set Bake Time Runs Out:

1."END" will appear in the display window and the oven will shut off automatically.

2.The control will beep 3 times every 25 seconds until the Clear off pad is pressed.

To Change the Oven Temperature or Bake Time after Baking has Started:

1.Press the function pad you want to change.

2.Press the Up or Down arrow pad to adjust the setting.

CAUTION

Use caution with the Timed Bake and Delayed Start features. Foods that can easily spoil such as milk, eggs, ???sh, meat or poultry, should be chilled in the refrigerator ???rst. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when cooking is completed.

Setting the Keep Warm Feature

The Keep warm pad turns ON the Keep Warm feature and will maintain an oven temperature of 170??F (77??C). The Keep Warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has

???nished. After 3 hours the Keep Warm feature will shut the oven OFF automatically. The Keep Warm feature may be used without any other cooking operations or can

be used after cooking has ???nished using Bake time or

Delayed timed BAKE.

To set Keep Warm:

1.Arrange the interior oven racks and place baked food in the oven.

2.Press the Keep warm pad. "- -" will appear in the display and the Keep Warm indicator light above the pad will turn ON.

???NOTE

If no further pads are touched within 6 seconds the request to turn ON Keep Warm will be cleared.

3.Press the Up or Down arrow pad to start. "Hld" will be displayed.

4.To turn Keep Warm OFF at any time press the Clear off or Keep warm pad. The Keep Warm indicator light above the pad will turn OFF.

To set Keep Warm to turn ON automatically:

1.Arrange the interior oven racks and place food in the oven. Set the oven properly for Timed bake or

Delayed timed Bake.

2.Press the Keep warm pad. "- -" will appear in the display and the Keep Warm indicator light above the pad will turn ON.

3.Press the Up or Down arrow pad to start. Keep Warm is set to turn ON automatically after Timed

Bake or Delayed Start Bake has ???nished.

4.To turn Keep Warm OFF at any time press the Clear off pad. The Keep Warm indicator light above the pad will turn OFF.

To Set the Sabbath Feature (for use on the

Jewish Sabbath & Holidays)

The Bake time and Start time pads are used to set the Sabbath feature. The Sabbath feature may only be used with the Bake pad. The oven temperature may be set higher or lower after setting the Sabbath feature (the oven temperature adjustment feature should be used only during Jewish Holidays), however the display will not visibly show or provide any audible tones indicating whether the change occurred correctly. Once the oven is properly set using Bake with the Sabbath feature active, the oven will remain continuously ON until cancelled. This will override the factory preset 12-Hour Energy Saving feature.

If the oven light will be needed during the Sabbath, press the Oven light pad before activating the Sabbath feature. Once the oven light is turned ON and the Sabbath feature is active, the oven light will remain ON until the Sabbath feature is turned OFF. If the oven light needs to be OFF, be sure to turn the oven light OFF before activating the Sabbath feature.

IMPORTANT NOTES: It is not advised to attempt to activate any other program feature other than Bake while the Sabbath feature is active. ONLY the following key pads will function after setting the Sabbath feature;

Up or Down arrow, Bake & Clear off. ALL OTHER

KEYPADS will not function once the Sabbath feature is properly activated.

To Program the Oven to Begin Baking Immediately

&activate the Sabbath feature:

1.Be sure that the clock is set with the correct time of day.

2.Place the food in the oven.

3.Press the Bake pad. " ??? ??? ??? ??" appears in the display.

4.Within 5 seconds, press the Up or Down arrow pad. The display will show "350??F (177??C)." By holding the Up or Down arrow pad, the temperature can then be adjusted in 5??F increments (1??C if the control is set to display Celsius).

5.If you desire to set the oven control for a Timed bake or a Delayed start do so at this time. If not, skip this step and continue to step 6. Refer to the Bake time (complete steps 6-7) / Start time (complete steps 6-10) section for complete instructions. Remember the oven will shut down after using Bake time or Start time and therefore may only be used once during the Sabbath/Jewish Holidays. The maximum Start time Bake time is 11 hours & 59 minutes.

6.The oven will turn ON and begin heating.

SETTING OVEN CONTROLS

7.Press and hold both the Bake time and Start time pads for at least 3 seconds. SAb will appear in the display. Once SAb appears in the display the oven control will no longer beep or display any further changes and the oven is properly set for the Sabbath feature.

???NOTE

You may change the oven temperature once baking has started by pressing the Up or Down arrow (for Jewish Holidays only). The oven temperature will be adjusted in 5??F increments with each press of these pads (1??C

if the control is set to display Celsius). Remember that the oven control will no longer beep or display any further changes once the oven is set for the Sabbath feature.

8.The oven may be turned OFF at any time by ???rst pressing the Clear/Off pad (this will turn the oven OFF only). To turn OFF the Sabbath feature press and hold both the Bake Time and Start Time pads for at least 3 seconds. SAb will disappear from the display.

Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not turn back on automatically. The oven will remember that it is set for the Sabbath and the food may be safely removed from the oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath. After the Sabbath observance turn OFF the Sabbath feature. Press and hold both the Bake Time and Start Time pads for at least

3 seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further assistance, guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at http:\\www.star-k.org.

SELF-CLEANING

Self-Cleaning

A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a ???ne powdered ash you can wipe away with a damp cloth.

IMPORTANT

Adhere to the following cleaning precautions:

???DO NOT use oven cleaners or oven protective coatings in or around any part of the oven interior.

???DONOTclean the oven door gasket. The woven material of the oven door gasket is essential for a good seal. Care should be taken not to rub, damage or remove the gasket.

???DO NOT use any cleaning materials on the oven door gasket. Doing so could cause damage.

???Remove the broiler pan and insert, all utensils and ANY ALUMINUM FOIL. These items cannot withstand high cleaning temperatures and will melt.

???Completely remove ALL OVEN RACKS and ANY ACCESSORIES.Iftheovenracksarenotremoved, they will lose their special coating properties and will no longer slide in and out of the oven cavity effortlessly.

???Remove any excessive spillovers in the oven cavity before starting the Self-Cleaning cycle. To clean, use hot, soapy water and a cloth. Large spillovers can cause heavy smoke or ???re when subjected to high temperatures. DONOTallow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie ???lling) to remain on the surface as they may leave a dull spot even after cleaning.

???Clean any soil from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom. These areas heat suf???ciently to burn soil on. Clean with soap and water.

What to Expect during Cleaning

While the oven is in operation, the oven heats to temperatures much higher than those used in normal cooking. Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed. Smoke may appear through the oven vent.

If heavy spillovers are not wiped up before cleaning, they may ???ame and cause more smoke and odor than usual. This is normal and safe and should not cause alarm. If available, use an exhaust fan during the self-cleaning cycle.

CAUTION

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

During the Self-Cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave small children unattended near the appliance.

The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle of any range. Move birds to another well-ventilated room.

DO NOT line the oven walls, racks, bottom or any other part of the range with aluminum foil. Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil will melt to the interior surface of the oven).

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the Self-Cleaning cycle is completed. The oven may still be VERY HOT.

???NOTE

See additional cleaning information for the oven door in the General Care & Cleaning section.

DO HAND

CLEAN FRAME

DO NOT HAND

CLEAN OVEN

DOOR GASKET

DO HAND

CLEAN DOOR

Self-Clean Cycle

???NOTE

The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the Self-Clean cycle. This will help eliminate the normal odors associated with the Self-cleaning cycles.

To Set the Controls for a Self-Clean (3 hours) or a Delayed Start Self-Clean (3 hours):

???NOTE

If you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.

1.Be sure the clock shows the correct time of day.

2.Press the START TIME pad.

3.Press and hold the UP ARROW pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed.

4.Press the CLEAN pad. "- -" appears in the display.

5.Press the UP ARROW pad once.

As soon as the controls are set, the motor driven lock will begin to close automatically and the ???Door

Locked??? indicator light will ???ash. DO NOT open the oven door while the light is ???ashing (it takes about

15 seconds for the oven door to lock).

SELF-CLEANING

6."CLn" will appear in the display during the Self-Clean cycle and the "Door Locked" light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1.???CLn??? will appear in the display and "Door Locked" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "Door Locked" light has gone out, the oven door can be opened.

???NOTE

When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a Self- Cleaning cycle:

1.Press the CLEAR/OFF pad.

2.Once the oven has cooled down for about 1 HOUR and the "Door Lock" light has gone out, the oven door can be opened.

3.Restart the Self-Clean cycle once all conditions have been corrected.

Your oven thermostat has been precisely set at the factory. This setting may differ from your previous oven, however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or cool for your recipe times, you can adjust the thermostat so that the oven cooks hotter or cooler than the temperature displayed.

To Adjust Oven Temperature:

1.Press and hold the BAKE pad for 8 seconds. The display now indicates the amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read ???0???.

2.The temperature can now be adjusted up or down 35??F or 19??C, in 1??F or 1??C steps by pushing and holding the UP or DOWN ARROW pad. Adjust until the desired amount of degrees offset appears in

the display. When lowering the oven temperature, a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.

3.When you have made the desired adjustment, wait 5 seconds or press CLEAR/OFF to accept the change.

???NOTE

The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature.

Care and cleaning of stainless steel

Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Refer to the General Care & Cleaning table for detailed cleaning instructions.

Removing and replacing the lift-off oven

Around

10??

CARE & CLEANING

Oven

door

door

CAUTION

The door is heavy. For safe, temporary storage, lay the door ???at with the inside of the door facing down.

To Remove Oven Door:

1.Open oven door completely (horizontal with ???oor -

See Figure 1).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 2). A tool such as a small ???at-blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 4).

To Replace Oven Door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 4). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door (horizontal with ???oor - See

Figure 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (See Figure 2) to the locked position.

5.Close the oven door.

Door Hinge locations

with oven door fully openFigure 2

Figure 1

Special door care instructions - doors contain glass that can break.

Read the following recommendations:

1.Do not close the oven door until all the oven racks are fully in place.

2.Do not hit the glass with pots, pans, or any other object.

3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Changing oven light

CAUTION

Be sure the oven is unplugged and all parts are COOL before replacing the oven light bulb. Do not turn

the oven light on during a self-cleaning cycle. High temperature will reduce lamp life.

On some models an interior oven light will turn on automatically when the oven is opened. The oven light may be turned on when the door is closed by using the oven light switch located on the Electronic Oven control. The oven light bulb is covered with a glass shield held in place by a wire holder. THIS GLASS SHIELD MUST

ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.

CAUTION

BE SURE OVEN IS COOL

To Replace the Light Bulb:

1.Turn the power off at the main source.

2.Wear a leather-faced glove for protection against possible broken glass.

3.Replace bulb with a 40 Watt

appliance bulb only.

4.For self-cleaning oven, press wire holder to one side to

release glass shield, change bulb and be sure to replace glass shield.

17

BAKING

PROBLEMS

Cookies and biscuits burn on the bottom.

Cakes too dark on top or bottom.

???Cookies and biscuits put into the oven before the preheating time is completed.

???Oven rack overcrowded.

???Dark pan absorbs heat too fast.

???Cakes put into the oven before preheating time is completed.

???Rack position too high or low.

???Oven too hot.

???Allow oven to preheat to the selected temperature before placing food in oven.

???Choose pan sizes that will permit 5.1cm to 10.2cm

(2??? to 4???) of air space on all sides when placed in the oven.

???Use a medium-weight aluminum baking sheet.

???Allow oven to preheat to the selected temperature before placing food in the oven.

???Use proper rack position for baking needs.

???Set oven temperature 25??F/12??C lower than recommended.