User Instructions

ICR FTSM ??

TRACTOR LIFT

Model Number 610.24610

Provides access to mower deck for easy cleaning and service

Fits all 1985 through current models

of CRAFTSMAN front engine tractors and zero turn mowers

???Adjustable arms for greater versatility

???Extra heavy duty steel construction

If you read and follow these instructions, this product can be assembled in approximately 20 minutes

???Assemble unit on cardboard to avoid scratches or damage to parts Can easily be assembled by one person

All fasteners for this Tractor Lift can be purchased at Sears or any hardware store

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Visit our Craftsman website: www.sears.com/craftsman

Patent Pending

If there are any missing parts, or if you have any questions on assembly, operation, maintenance or safety, please call

1-800-652-2321

Made inChina

310041-REV C 1/09

WARNINGS

???Always check to ensure stabilizers are properly in place and stabilizer latches are engaged before starting any work on tractor.

???Read and understand all safety and operating instructions

before using the tractor lift. Never allow anyone unfamiliar with these instructions to use the tractor lift.

???Read and understand all safety and operating instructions provided by the tractor's manufacturer before using tractor lift.

???Never lay under the tractor or mowing deck.

???When using lift, keep all bystanders, including children, away.

???This tractor lift must be only used for lifting and lowering to and from a level and stable surface.

???Never use in wet conditions.

???Do not attempt to lift the front and back of the tractor at the same time.

???Do not use tractor lift as an automotive lift, or for any other use for which it is not intended or designed.

???If tractor lift is bowing while lifting or lowering your tractor, which indicates an overload condition, remove the tractor immediately.

???Do not attempt to lift or lower any power equipment while motor is running.

???Never engage blades while using tractor lift.

???Always disconnect spark plug wire from tractor before beginning any work on tractor.

???Do not exceed the rated capacity of the tractor lift - 275 Ibs.

???Failure to follow these warnings may result in property damage and/or serious bodily injury.

SAFETY INSTRUCTIONS

Be sure to read and follow all safety instructions and warnings. Failure to follow these instructions may result in damage to the product and/or serious personal injury.

Danger of serious personal injury exists. Serious personal injury can occur when using a lifting device.

Never attempt to ride any vehicle up or down the tractor lift.

Do not climb onto tractor while tractor is in the elevated position.

When working on the front of the tractor always place wheel chocks in back of the rear wheels/tires.

Always raise and lower tractor lift in a controlled fashion; do not allow the tractor to drop too quickly, damage could occur.

Make sure lifting arms are aligned and set to the proper distance apart so that the equipment being loaded is well balanced on the lift.

Do not remove warning decals from product.

Before each use, always check for any worn, loose, or

damaged parts on the tractor lift. If any damage is present,

DO NOT USE THE TRACTOR LIFT.

Periodically check the fasteners to make sure they are still tight and in place.

Keep lift surface clean by occasionally cleaning with water and any mild detergent.

Do not add to or try to modify the tractor lift in any way.

Any modifications will void any warranties.

Failure to abide by the warnings and read the safety instructions may result in loss of load, damage to lift and/or property, serious personal and/or fatal injury.

OPERATION

Tractor Lift can be used out of the box on all Craftsman tractors with bumpers or brush guards. Tractor Lift mounting hardware is provided if your tractor does not have a bumper or brush guard.

TOOLS REQUIRED FOR ASSEMBLY

9/16" Wrench and/or Socket Adjustable wrench

MAINTENANCE

Store unit in a clean dry place.

Recommended tire pressure - 30 PSI.

Before each use:

???Always check tire pressure.

???Always inspect unit for damage.

???Always check fasteners for tightness.

??.....--

L..._

29

t'--

L___

22

28

(O )

6

31

32

Front

IlXll

Remove,

add washer ( 24 ), replace.

6

Rear

Remove existing bolt "X" and set aside. If tractor does not

have this bolt, use supplied 3/8" x 1-1/4" bolt and 3/8" nyloc nut.

Insert bolt ( 29 ) through inside front hole of frame, through tractor bracket ( 7 ) and secure with nyloc nut ( 27 ).

Add flat washer ( 24 ) under head of bolt removed in earlier step and reinsert through tractor mounting bar and tighten.

For LT1000 & LT2000 series tractors, use self-thread bolts ( 28 ) in place of bolt ( 29 ) and nut ( 27 ).

Slide lifting bar ( 6 ) through cut-out in tractor brackets.

Pin lifting bar in place with one hairpin cotter ( 26 ) on each side, inside of tractor brackets ( 7 ).

Place lifting bar ( 6 ) under rear tractor hitch and slide threaded stud through hole.

Secure in place with flat washer ( 32 ) and hex nut ( 31 ).

4

5

Note: The higher the lift tube extensions (5)

are positioned, the harder the tractor will be to lift.

Settings:

A.Push Mower

B.Brush guard / Bumper C. Craftsman Tractor

D. Front of Craftsman Zero Turn

Center Tractor Lift in front of tractor.

Check that both stabilizers are resting on the ground as shown.

Align lift tube claws with lifting bar or bumper/brush guard and roll Tractor Lift forward to engage.

Check that claws are securely hooked under the lifting bar or bumper/brush guard.

Place foot onto foot bar and apply continuous forward pressure with foot while pulling down on tractor lift handle.

Once lifted, the weight of the tractor will automatically force the handle down into the correct position.

Always check that stabilizer latches are in the locked position after lifting tractor.

Stabilizer latches must be flipped to the unlocked position before lowering tractor.

LockedUnlocked

PRODUCT RECORD

In the space below record the model number and purchase date of your cart. The model number can be found on the front cover of the user guide.

Model Number

Purchase Date

Keep this booklet and your Sears receipt in a safe place for future reference.

ORDERING INFORMATION

After the three year warranty period all parts may be ordered by calling Sears Service at 1-800-4MY-HOME (1-800-469-4663).

When ordering repair parts, always give the following information:

Product -

Model Number-

Part Number - *

Part Description - *

*Found on the repair part list. Reference page 9.