Discoi_nect the air tool from air supply
before.changir_ tools or atta_menls_ .....
servicing and during non-operation.
DO not wear loose fitting clothing, scarves, or neck ties in work area. Loose clothing may become Caught in moving paris and result in serious personal injury.
Do not wear jewelry when operating any tool. Jewelry may become caught in moving parts and result in serious personal injury
Do not deprasS trigger when connectin9 the air supply hose.
Never trigger the tool when not applied to a work object.
Attachments must be securely attached. Loose attachments can cause
sedous injury.
Protect air lines from damage or pullcture.
Never point an air tool at oneself or any other parson. Serious injury could occur.
Check air hoses for weak or worn conditions before each use. Make sum all connections ate secure.
Release all pressure from the system before attempting to install, service, relocate or perform any maintenance.
Keep allnuts, bolts and screws tight and ensure equipment is in safe working condition.
air powered tool Always examine accessories before mounting for chips, cracks, or signs of damage.
Never use mounted points or other accessories that have been dropped or exposed to water, solvent or extreme temperature changes. It is a good practice to operate the tool ina protected enclosure for one minute after mounting any accessory.
Always use accessories with an RPM rating that meets or exceeds the tool
RPM taUng.
Never cany a tool by the hose or putl the hose to move the tool or a compressor. Keep hoses away from heat, oil and sharp edges, Replace any hose that is damaged, weak or worn.
Inhalation hazard: Abrasive tools, sj.__h as g#nders, sanders and cut-off tools generate dust end abrasive materials which can be harmful to human lungs and respiratory system. Always wear MSHA/NIOSH approved, properly rdting
face mask or respirator when using such tools.
SOme materials such as adhesives and
could cause serious injury with prolonged exposure. Always work in a clean, day, well ventilated area.
Tools which contain moving elements, or drive other moving tools, such as gnnding wheels, sockets, sanc_ng discs, etc_, can become entangled in hair, clothing, jewelry and other loose objects, resulting in severe injury.
Never wear loose t_ffing apparel which contains loose straps or ties, that could become tangled m moving parts of the tool. Remove any Jewelry_ watches, etc., which might become caught by the
tool Keep hands away from moving parts. Tie up or cover long hair.
Improperly maintained tools and accessories can cause serious injur F Maintain the tool with care. A properly ma{ntaiBed tool, with sharp cutting edges, reduces the risk of binding and is easier to control.
There is a risk of bursting if the tool is damaged. Check for misalignment or binding of moving parts, breakage of parts and any other condition that affects the fool'soperation, ff damaged, have the tool serviced before using.
Too_ whP..h cut, sheer, ddll, staple, punch, r__hiseJ,etc. =re capable of causing serious injury. Keep the working part of the tool away from hands and body,
After an air tool has been lubricated, oil
will discharge through the exhaust port during the first few seconds of
operation. Thus, the exhaust port must be covered with a towel before applying air pressure.
Only use sockets designated "FOR USE
WITH IMPA C T WRENCHES. "Hand tool sockets can break, creating a hazard from flying pieces. Always check sockef_ retainers and drives regularly for wear or damage and replace when
necessary.
