T O P S + F I N I A L S

All hard mount tops are made of spun aluminum. Top provided with toolless access for ease of maintenance.

Finials are manufactured of cast aluminum.

G L O B E

Globe is available in 9" high efficiency UV resistant acrylic or optional polycarbonate refractive design. Internal and external prisms work in conjunction to provide excellent vertical and horizontal illumination.

C A G E A S S E M B L I E S

Two (2) uprights are manufactured of cast aluminum. Banding is spun aluminum. All cage assemblies are mounted to the exterior of the housing via four (4) stainless steel fasteners. A variety of finishes are available.

E L E C T R I C A L

O R D E R I N G I N F O R M AT I O N

S A M P L E N U M B E R : A R C 2 5 M W W 5 5 5 2

Available up to 400W MH and 250W HPS. Ballast assembly is mounted on a removable tray with quick discon- nects for ease of installation and maintenance. Plug in starter standard when applicable. Terminal block is hard mounted to the casting and easily accessible through the door???s wide entryway. UL listing and optional induction fluorescent lamp available.

4=Internal NEMA photocontrol Receptacle P=Polycarbonate Refractor 9

WH=White

BZ=Bronze

AP=Grey DP=Dark Platinum H=Hartford Green

R=Internal Downlight Reflector U=UL/CSA Listed

Heavy duty-cast aluminum housing and door. Wide handhole provide toolless entry for access to plug-in starters and optional NEMA twistlock PCR. 1" ANSI wattage/source label. Fixture is 3G vibration rated.

M O U N T I N G

Post top mount fits 3" OD tenons. Four (4) stainless steel fasteners standard.

F I N I S H

Standard polyester powder coat

finish in black. For more color options

see optional color or consult your

Streetworks represenatitive for more

information.

E PA :

Effective Projective Area: 2.1

S H I P P I N G D ATA

Approximate Net Weight:

50 lbs. (23 kgs.)

O P T I O N A L C O L O R S [ S t a n d a r d c o l o r i s b l a c k , o t h e r f i n i s h c o l o r s a v a i l a b l e . C o n s u l t y o u r C o o p e r L i g h t i n g r e p r e s e n t a t i v e ]

NOTE: 1 85W QL Induction only. 120V or 240V only. 2 400W available only in Metal Halide. Not available in 480V. 3 Refer to technical section for lamp/ballast/voltage compatibility. 4 Medium-base lamp standard for 150W and below Metal Halide. 5 Available 120V only. 6 Available 50-150W, 120/240 or single voltage only. 7 Avenue Cage must be used with Avenue Top. Avenue Top is available without cage. 8 Cage Type 6 will be finished same color as base. 9 Polycarbonate parts used with Metal Halide lamps will eventually yellow.

175-Watt MH

14,000-Lumen Clear ED-28 Lamp

Type III Acrylic Refractor

175-Watt MH

14,000-Lumen Clear ED-28 Lamp

Type V Acrylic Refractor

F O O T C A N D L E TA B L E

Select mounting height and read across for footcandle values of each isofootcandle line. Distance in units of mounting height.