Congratulations on purchasing your new Casablanca?? ceiling fan! It will provide comfort and performance in your home or office for many years. This installation and operation manual contains complete instructions for installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

To register your fan, please visit: www.CasablancaFanCo.com/register

What to Expect with Your Installation

30 inches

Preparation

Save your receipt for proof of purchase.

Light Kit

11PA GE

What to Expect with Your Installation

www.CasablancaFanCo.com 1.888.227.2178

Must be able to secure the fan to building structure or fan-rated outlet box

You may need a friend to help you.

If you are unfamiliar with wiring, use a qualified electrician.

Know your wiring

Ceiling angles greater than 34?? will require an

Angled Mounting Kit.

See page 4 for details.

Assess location

1 Standard Downrod

for ceilings 8-10 feet high

2 Shorter Downrod

for fans installed close to ceiling

3 Longer Downrod

for ceilings 10 feet or higher

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of fire, electrical shock, or motor damage, use only Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

Select a downrod length

c.2 - Use only Casablanca replacement parts.

Tools Needed

www.CasablancaFanCo.com 1.888.227.2178

WALL

34O CEILING

If you have a flat ceiling:

Hang your fan by a standard downrod (included).

If you have an angled ceiling:

1.You will need a longer downrod (sold separately).

2.If your ceiling angle is greater than 34??, you will also need an Angled Mounting Kit (sold separately).

Mounting Options www.CasablancaFanCo.com 1.888.227.2178

Use the three steps below to determine if your ceiling angle is greater than 34??

123

34??

UA T I

S

T

You need ONLY a Longer Downrod

*most common

UA T I

S

T

You need BOTH a Longer Downrod & an Angled Mounting Kit

4

Ceiling Bracket

www.CasablancaFanCo.com 1.888.227.2178

OFF

Make sure all four bumpers are still attached.

For angled ceilings, point opening toward peak.

If you are unable to do this, call Technical Support at 1-888-227-2178.

Time Saver Tip: Get a helper to insert grommets, found in the hardware bag, into the blades while you???re doing the next couple of steps.

6

Remove the shipping blocks from the motor. Save the screws. They will be needed for blade iron installation.

Note: Some fans will have a shipping ring instead of shipping blocks. Please remove the ring and save the screws.

Downrod

www.CasablancaFanCo.com 1.888.227.2178

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

12345

7

Downrod (continued)

Remove the pre-installed setscrew so that the downrod can be inserted.

Note: The adapter cover is not used for low-profile mounting.

Slide the adapter cover onto the downrod, then hand tighten the downrod (at least

4-5 full turns) until it stops.

Downrod (continued)

www.CasablancaFanCo.com 1.888.227.2178

Wiring

Note: To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight.

C

EI

LING

For Dual Switches

Using an orange wire connector from

thehardware bag, connect the three grounding wires

(green, green/yellow stripe, or bare copper) coming from the ceiling, downrod, and hanging bracket.

Green/Yellow

Stripe

Green/Yellow

Stripe

For a Single Switch

Using the orange wire connectors from

the hardware bag, connect the black wire (ungrounded) from the ceiling to the black and the blue wires from the fan. Connect the white wire (grounded) from the ceiling to the white wire from the fan.

Using orange wire connectors from

from the fan. Connect the second (ungrounded) wire from the ceiling to the blue wire from the fan.

Refer to CAUTION c.1 on pg. 2

10

the outlet box and the ungrounded wires on the other side of the outlet box.

Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown.

Lift the canopy into place so that the screw holes are aligned.

Insert the two canopy screws found in the hardware bag.

Blades

Insert grommets found in thehardware bag into the holes in the blades, then secure each blade to a blade iron with screws found in thehardware bag.

www.CasablancaFanCo.com 1.888.227.2178

Remember the screws that you kept after removing the

shipping blocks (page 6)? You need them plus five more from

the hardware bag for this step.

Lightly attach the blade irons to the

motor with screws found in the hardware bag, then securely

tighten after both screws are attached.

Your blades are shielded with Dust Armor?? which is a nanotechnology coating that repels dust. For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning agents may damage the finishes.

12

Switch Housing

www.CasablancaFanCo.com 1.888.227.2178

Light Kit (continued)

www.CasablancaFanCo.com 1.888.227.2178

Install a bulb into each of the sockets. When necessary, replace with bulbs of the same type and wattage.

Press the globe and globe keeper flush against the metal plate. Thread the light pull chain through the hole in the center of the finial cap and thread the fan pull chain through the hole in the side of the cap. Finally, thread only the light pull chain through the hole in the finial and

Connect the appropriate pull chain pendant to each of the short chains coming from the finial and finial cap.

See next page for fan operation instructions.

screw the finial onto the threaded rod.

Note: Glass shade style and number of lights may vary.

Operation

ON

Be sure to turn power back on at the breaker and the switch before trying to operate fan.

The fan pull chain controls the fan: from high to off.

The light pull chain controls the power to the light fixture: on and off.

16

To switch the direction of air flow, move the reverse switch to the opposite position.

OFF

Be sure to turn off power to the fan before performing any maintenance or relamping.

Changing the bulbs - unscrew the finial and remove it from the threaded rod. Remove the finial cap and the globe keeper while supporting the globe with your other hand. Carefully remove the globe. Unscrew bulbs and replace with bulbs of the same type and wattage. Reinstall the globe assembly.

Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes.

17

For questions regarding removing a light kit, call customer service 1-888-227-2178.

Troubleshooting

www.CasablancaFanCo.com 1.888.227.2178

Fan doesn???t work

???Make sure power switch is on.

???Pull the pull chain to make sure it is on.

???Push the motor reversing switch firmly left or right to ensure that it is engaged.

???Check the circuit breaker to ensure the power is turned on.

???Make sure the blades spin freely.

???Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on page 10.

???Check the plug connection in the switch housing.

Excessive wobbling

???Tighten all of the blade and blade iron screws until they are snug.

???Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.

???Use the provided balancing kit and instructions to balance the fan.

Noisy Operation

???Tighten the blade and blade iron screws until they are snug.

???Check to see if any of the blades are cracked. If so, replace all of the blades.

Lights dim when turned on or do not turn on at all.

???Make sure the wattage of the light bulbs installed matches the specifications on the light sockets.