Start Here
Easy Setup Instructions
3 Install the Print Head
4 Install the Ink Tanks
i470DSeries
Photo Printer
5 Connect the Printer
To Your Computer
1 Carefully remove all items from the box.
i470D Series
Photo Printer
Paper Rest
Documentation
and Software Kit
Ink Tanks
1Remove all shipping tape from the front and sides of the printer.
Shipping
Tape
2Plug the power cord into the back of the printer and connect the other end to a power outlet.
3 Press the Power button.
4Open the output tray, then open the front cover. The print head holder automatically moves to the center.
Output Tray
Write down the serial number located to the right of the print head. You will need this later to register the product.
1 Remove the print head from its package.
Tear at notch to open
2 Remove the orange protective cap.
NOTE: Do not touch the electrical contacts on the back and bottom of the print head.
Electrical
contacts
3 Raise the gray lock lever on the printer.
4Slide the print head into the holder until it is securely seated.
Do not press it down.
5 Lower the lever until it locks into place.
1Remove the black ink tank
NOTE: To avoid spilling ink, do not touch the bottom of the tank once you have removed the protective cap.
Protective cap
2Insert the black ink tank into the slot on the right, then push in until the ink tank locks into place.
Click
3Repeat the procedure for the color ink tank
4Close the front cover, attach the paper rest and pull out the output tray.
1 Turn the printer off.
IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready.
2Connect one end of a USB cable (not included) to the computer, the other to the printer.
USB Port
USB Cable
Continue with Step 6 on side two.
6 Install the Printer Driver (Windows??)
6 Install the Printer Driver (Macintosh??)
7 Align the Print Head
Windows
1 Be sure to TURN THE PRINTER OFF.
5When the Printer Port window appears,
TURN THE PRINTER ON so the printer port (connection) can be automatically detected.
Macintosh
1Turn on your Mac and your printer and insert the ???i470D Setup Software & User's Guide???
2
Mac OS X folder, then the Printer Driver folder.
8Click Install. When a message asking for your confirmation to proceed with the installation, click Continue Installation.
1Place a sheet of blank paper in the paper rest.
2Start the alignment procedure.
Windows:
a.For Windows XP/2000, click Start, select Control Panel, Printers and Other Hardware, then Printers and Faxes.
b.
NOTE: For Windows?? XP or Windows 2000, log on to Windows as an Administrator before continuing.
IMPORTANT: If you see the Found New Hardware Wizard, click Cancel.
2Close any open software applications, then insert the ???i470D Setup Software & User's Guide???
NOTE: If the setup program does not run, click Start, then Run, then type D:\msetup.exe, where D is your
3Read the License Agreement, then click Yes to continue.
4When the main menu appears, click
Install.
6When the Terminate Installation window appears, click OK.
NOTE: Remember to register your product. The serial number is located on the inside of the printer, to the right of the print head.
7 When the Other Driver screen appears, click Install. Then follow the
Click OK when the Terminate Installation window appears.
8When the software screen appears, click Install.
9When the Terminate Installation window appears, click OK, then Exit.
10Click Yes if you are prompted to restart your computer
IMPORTANT: To ensure highest quality output, continue with Step 7
Align the Print Head.
3
4When the ???Authenticate??? screen appears, enter your administrator name and password, then click OK.
5When the ???Welcome to the BJ printer driver Installer??? screen appears, click Continue.
6Read the Software License Agreement and click Continue, then click Agree.
7Select a destination for the printer driver to be installed. Then click Continue.
9When the message ???The software was successfully installed??? appears, click
Restart.
10Access your
11
12Follow the
13Access your
14Follow the
NOTE: Be sure to register your product. The serial number is located on the inside of the printer, to the right of the print head.
IMPORTANT: To ensure highest quality output, continue with Step 7
Align the Print Head.
NOTE: For Windows 98/Me, click
Start, Settings, then Printers. Right- click the Canon i470D icon, then click Properties.
c.Click the Maintenance tab, then click the Print Head Alignment icon.
d.When asked to start print head alignment, click OK.
Macintosh OS X:
a.
Utilities folder, then the Print Center icon. When the Printer List screen appears, select i470D.
Under Printers menu, select Configure Printer. Select i470D, and click Select.
b. Click the
3Follow the
4Click OK (Windows) or Send (Macintosh) when finished.
Part no.
Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.
PRINTED IN VIETNAM