Common Functions & Commands
Model
??
1.Cut
1 (1 =
2 (2 = no
3 (3 =
4 (4 = no
2.Contrast
+ 2 to
???= lighter)
3.Auto Reduction
??2003 Brother International Corporation, 100 Somerset Corporate Boulevard, Bridgewater, NJ 08807. All rights reserved. All trademarks and registered trademarks referenced herein are the property of their
1.Copies
3. Block No.
Choose the block numbers (start/end) to print.
4.Mirror (print text in reverse order)
Off
On
1. GLB (Global) Size
Set font size for label.
Auto
1mm
2mm
3mm
4mm
6mm
9mm
12mm
2. GLB (Global) Wide
Set label font width.
Minimum
Narrow
Format Normal
Wide
3. GLB (Global) Style
Set label font style - individual line style overrides settings.
Normal
Bold
Outline
Italic
Italic + Bold
Italic + Outline
4. Align
Specify text alignment.
Left
Justify
Right
Center
Creating & Printing Commonly Used Labels
General
Name
Badge
1.Press ??? until Normal. Press
to select.
2.Type Text ( for new line, or
to place a block of text to the right).
3.To change text style or size per specific line, use to place cursor on line to be
??? to specify different font sizes.
to choose. Press
to enter.
4.
1.Press ??? until Normal. Press
to select.
2.Set label length ??? use number pad to type length or
to specify. Press
to enter.
3.Type Name. Press for new line.
4.Type Company.
5.To change text style or size per specific line, use
to place cursor on line to be changed. Use
??? to specify different font types.
to choose. Press
to enter.
??? to specify different font sizes.
to choose. Press
to enter.
4.
1.Press ??? until
to select.
2.Set the length of the label with (BLK LEN ), use number pad to type length or arrows
4.Type Text.
5.To change text style or size per specific line, use to place cursor on line to be
??? to specify different font sizes.
to choose. Press
to enter.
1.Press ??? until Flag. Press
to select.
2.Set the diameter of the cable/wire (FLAG OI )
arrows to select, arrow
to next option.
3.Set the length of the label (FLAG LEN), use
number pad to type length or arrows
to select, arrow
to the next option.
6.Type text.
7.To change text style or size per specific line, use
to place cursor on line to be changed. Use
??? to specify different font types.
to choose. Press
to enter.
??? to specify different font sizes.
to choose. Press
to enter.
8.
1.Press ??? until Port. Press
to select.
Port
Label (cont.)
2
Panel
Label
5.To change text style or size per specific line, use to place cursor on line to be changed. Use
??? to specify different font types.
to choose. Press
to enter.
??? to specify different font sizes.
to choose. Press
to enter.
6.
4.Type Text.
(continue to next column)