INSTRUCTIONS

26.ACCESSORY

INSTRUCTIONS

4.FEATURES

DVD PLAYER

1.MPEG-4 Decoder Technology

2.Compatible with MP4 (AVI/5.X), DVD (DVD-R/DVD-RW), VCD, SVCD, CD-RW, WMA, MP3, JPG

3.Supporting Multiple Subtitles, Angles, Languages

4.Child lock function

5.4-Channel Audio Output

6.Pause, Play, Up/Down, Stop, Zoom, PBC Function

RADIO

1.AM/FM Radio Tuner

2.30 Radio Preset Stations (18FM, 12AM)

BULETOOTH FUNCTION

1.Bluetooth wireless transfers

2.Displaying bluetooth paring and connection status, call status, and caller's ID

3.Fast performance, fast connection, accurate and sensible search of devices in range

4.Support A2DP, AVRCP, HS/HF for handing calls and playing music

LCD DISPLAY

1.7??? - 16:9 TFT LCD Display

2.Touchscreen

INSTRUCTIONS

5.BASIC OPERATION

INSTRUCTIONS

25.SPECIFICATIONS:

1. SOURCE ON/OFF

Press SRC button on panel or SOURCE button on remote control quickly to power on. Press SRC button on panel or SOURCE button on remote control longer to power off.

2. PLAYING SOURCE CHOOSE

Press SOURCE button on remote control, unit will switch sources in the following sequence: RADIO ??? DVD ??? AUX

3. MUTE CONTROL

Press MUTE button on panel or MUTE button on remote control shortly to turn off sound output, press again to back to sound output.

4. VOLUME ADJUSTMENT

1)Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch button on display to adjust volume level.

2)The volume setting on this unit is 0 - 39.

BASS, TREBLE, BALANCE & FADER ADJUSTING (SELECT)

Press SEL button on remote control to choose your desired Bass, Treble, Balance & Fader level:

VOL BAS TRE L/R

F/R

NOTE:

1)DVD playing mode, MBP & User will be automatically activated.

2)After 5 seconds you choose desired mode, do not adjust volume button. The mode will automatically take you back to status before adjustment.

5. RESET

1)If unit is not working correctly, you should press the RES button. This will reset the radio and should start working correctly afterwards.

2)After reset, all settings will resume back to the factory default settings.

Power supply

Power range

Max operate current

Dimensions

Ground system

Amp Rating

FM tuner

European frequency range USA frequency range Signal/Noisse ratio

Stereo separation

Search station volt

Distortion rate

AM tuner

European frequency range USA frequency range Limit noise sensitivity

DVD PLAYER

Signal/Noise ratio

Frequency response

DC 12V 10.8-16.0V DC 10A 155X182X53MM Negative ground

80 Watts x 4 Channels

87.5-108MHz

87.5-107.9MHz 55dB 30dB 20-30dBuv

1.5%

522-1620KHz

530-1710KHz 32dB

70dB 20Hz-20KHz

INSTRUCTIONS

24.WIRING DIAGRAM

This player is equipped with ISO standard connector, please follow below instruction:

INSTRUCTIONS

6.PANEL ARRANGEMENT

???Red - ACC ON (+12V)

???Yellow ??? 12 V Constant

???Black ??? Ground wire

???Blue - Power Antenna / Remote Amp Turn On

???Orange ??? Back-Up Camera Trigger (+)

???Grey/Grey black - Right front speaker (+/-)

???White/White black - Left front speaker (+-)

???Purple/Purple black - Right rear speaker (+/-)

???Green/Green - Left rear speaker (+/-)

???Pink ??? Parking Brake (-)

Note:

The ???PARKING BRAKE??? wire must be connected to the parking brake system of your car. When the parking brake is engages, the LCD will be allowed to view your video. If not, the screen will produce an image saying, ???PARKING BRAKE???. This is a safety feature designed for the driver not to watch a video while driving. The video output on this unit will not be affected by this.

1.SOURCE Button 2.OPEN Button 3.VOLUME- Button 4.VOLUME+ Button 5.UP Button

6.DN Button 7.AUX IN 8.SD Slot 9.MIC Input 10.USB Slot

11.RELEASE Button

INSTRUCTIONS

7.BASIC FUNCTION

1. SOURCE Button

Press this button to power on. Press it shortly to switch audio source mode. At AUX IN mode, press it longer to power off.

2. OPEN Button

Press this button can eject the disc.

3. VOLUME - Button

Press this button shortly increase volume level one step by one step. Press this button longer increase volume level continuously.

4. VOLUME + Button

Press this button shortly decrease volume level one step by one step. Press this button longer decrease volume level continuously.

5. UP Button

Press this button to make the LCD monitor up.

6. DN Button

Press this button to make the LCD monitor down.

7.AUX IN

External connected audio input.

8. SD Input

Connect the SD memory card to this socket, and the unit can play MP3 music.

9.MIC Input

Bluetooth MIC input.

10. MINI USB PORT

Connect the USB memory to this socket, and the unit can play music format files supported by this unit in the USB memory.

11.RELEASE Button

Press this button to release the panel.

INSTRUCTIONS

23.TROUBLE SHOOTING

INSTRUCTIONS

22.OTHER PLAY MODE

INSTRUCTIONS

12.Slot indicator light

13.RESET Light

14.RESET Button

Press this button and this unit will be restored to the initial state.

15. Disc Slot

8.MAIN MENU TOUCH OPERATION

Contact book mode switching

OSD SET

DVD USB/SD

RADIO

GPS

You can touch this button under the Bluetooth mode to select the next mode.

Touch this function key to search the dialed numbers. Each time this key is touched, the cursor will move to the next dialed number.

Touch this function key to search the received numbers. Each time this key is touched, the cursor will move to the next received number.

Touch this function key to search the missed numbers. Each time this key is touched, the cursor will move to the next missed number.

INSTRUCTIONS

21.BLUETOOTH TOUCH OPERATION

1. Bluetooth hand-free/cell phone switching

2. Matching function during Bluetooth connection

3. Voice dialing function

4. Contact book mode switching

5. Return to the main screen

6. Hand-free key

7. Phone number display

8. Hang-up key

9. Delete key

10. Number keys

Functions and Descriptions

Bluetooth hand-free/cell phone switching

If you touch this switching button at the upper-left corner of the screen under the Bluetooth hand-free mode, the speaker will beep and the hand-free mode will be switched to the cell-phone mode.

Voice dialing function

If you touch the ???Voice dial??? button at the lower-left corner of the screen under the Bluetooth hand-free mode and the cell-phone mode, you will hear the keying tone, and you can go ahead with the voice dialing function according to the cell-phone instructions. Eg, if you wish to call someone, you can pronounce his/her name stored in the cell phone, then ,the name of the person to be called will be played by the speaker, and the telephone number of this person will be displayed on the screen and automatically dialed.

To cancel voice dialing

If you wish to disable the voice dialing function in the voice dialing mode, you can press the ???Voice dialing??? key again, and this function will be disabled after you hearing the keying tone.

Hand-free button: After a phone number is keyed in, press this button to call the user of this phone number. When there is an incoming call. Press this button to connect this call.

Hang-up button: When there is an incoming call, press this button to hang up or refuse to connect it.

Delete button: When a wrong digit is keyed in, press this button to delete the wrong digit.

Number keys: You can use these number keys to enter a phone number.

Phone number display: The phone number that you have just entered is displayed here.

INSTRUCTIONS

9.OSD SETUP

INSTRUCTIONS

10. CD Program Play

In CD mode, you can set the sequence of playing by the program function, the operation is as follows:

When CD is playing, press ST/PROG button, then the display shows:

Input the number of the song you want to program by the remote control, program the first song, input your desired song, for example, the sixth song, and press number button 6 on the remote control. Program the second song, press button move the cursor to 2 . Input your desired song, for example, the ninth song, press number button 9 on the remote control. Press button to program play.

Back to the normal mode, press the ST/PROG button, then press button. Note: This function can only be worked by the remote control.

INSTRUCTIONS

11.REMOTE CONTROL FUNCTION

4. SOURCE Button

Press this button to choose audio sources.

5. EQ Button

Press this button to choose POP, ROCK,CLASS,off.

6. SEEK + ( ) / SEEK - ( ) Button

Press this button to manual turning, speed or quick back, previous song and next song.

7. VOL + ( ) / VOL - ( )

Press this button to increase or decrease volume level.

8. SEL Button

Press this button to choose sound feature.

9. LOUD Button

Press this button to startup LOUD function.

10. BAND - P/N Button

In radio mode, press this button to choose band.

In VCD, DVD mode, press this button to choose

AUTO, PAL or NTSC system.

11. LOC/RDM Button

In radio mode, press this button to switch between local and direction. In VCD, CD mode, press this key to randomly play.

1. POWER

Press once to switch on, press again to switch off.

12. STOP Button

Press this button to stop playing.

13. PLAY/PAUSE Button

Press this button to switch between play and pause. In stop mode, press this button to play.

2. MUTE Button

Press once to turn off audio output, press again to resume volume level.

3. DSP

Press this button to show the time.

14. ST/ PROG Button

In radio mode, press this button to choose stereo or mono station. In audio mode, it can help STOP button to programmed play.

INSTRUCTIONS

INSTRUCTIONS

15. 0 - 10 + Button

Press this button to choose desired song, section, preset stations.

*Decimal numbers, for example the 19th song, press 1,9 button;

*Centesimal numbers, for example, the 120th song, press 1,2,0 button.

16. AMS / RPT Button

In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly.

17. TITLE Button

In DVD mode, press this button to play back to the top menu of disc.

18. AUDIO Button

In DVD mode, press this button to switch language of dialogue. In VCD mode, press this button to choose left track, right track, and stereo.

19. SET Playing Time

In DVD mode, press this button, you can define playing time.

20. SUBTITLE Button

In DVD mode, press this button to switch language of subtitle.

21. PBC Button

In VCD mode, press this button to display all song menus, work with number button to choose songs.

22. UP, DOWN, LEFT, RIGHT, ENTER

Button

In DVD mode, press this button to move cursor up, down, left, right to choose item in menu. Press the enter button to confirm choice.

23. SLOW Button

In audio mode, press this button to slow backward and slow forward.

24. ANGLE Button

In DVD mode, press this button to change play angle.

25. SETUP Button

In audio mode, press this button to choose different set items.

26. OSD Display

Press this button to display the title chapter and the left time.

27. ZOOM Button

In DVD/VCD mode, press this button to ZOOM in. In CD/MP3/USB/SD mode, press this button to choose EQ.

28. MENU Button

Press button to back to the main menu.

BATTERY CHANGE

When control distance of remote control becomes shorter or no function, please change battery. Please confirm polarity before change.

One hand press stopper, then pull out battery.

Put battery into controller.

Insert battery holder into controller.

19.CD BASIC OPERATION

Slide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch button on main menu can to play.

1. Repeat Play

In CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeat CD disc: Single song repeat??? Repeat play off.

MP3 disc: Single song repeat???Directory repeat??? Repeat play off.

2. Fast Forward/Fast Rewind

Press SEEK + / SEEK - button on remote control, or / touch button on display to speed forward or backward playing.

Note: Hold above button a bit longer to operate.

4. Pause Play

In play mode, press button on remote control, or button on display to pause. Press again to go back to normal play.

5.Stop Play

In play mode:

1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.

2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.

6.OSD

In playing mode, short press OSD on remote control to show all information of present disc.

7. Randomly Play

In CD mode, press LOC/RDM button on remote control, to instantly play each song. Press again to back to the normal play.

8. EQ Mode

1)This function can only be worked by remote control.

2)When playing CD/MP3, press the ???ZOOM??? button on the remote control, you can choose the sound mode.

3) When enter this function, press the button / / / to move the course to select sound mode which in the system menu, after your selection position will show red color to indicate the confirmation.

9. OPEN

Press OPEN button on panel to eject disc.

INSTRUCTIONS

14. PBC (MENU) Play

In VCD mode, press this button then play the PBC and display will show whole menu in disc, work with number button to choose song. When you are playing either song of the PBC, and you want to stop to select another song, press the button to turn off. Note:

1)This function can be worked by the control.

2)PBC is suitable for the SVCD and VCD 2.0 disc.

3)In PBC mode, you can not press number button only to choose song.

15. VCD Program Playing

In VCD mode, you can set playing sequence of songs by program play function. The program playing operation steps are as follows:

In VCD mode, press ST/PTOG button, display will show:

Input the songs which you want to programmed by the number buttons on remote control. Fr example: Program the first song, input your desires song, for example, the fourth song, and press number button 4 on the remote control. Program the second song, press button move the cursor to 2 . Input your desired song, for example, the eighth song, press number button 8 on the remote control. Press button to program play. Back to the normal mode, press the ST/PROG button, then press button.

Note: This function can only be worked by the remote control.

12. LOADING

INSTRUCTIONS

INSTRUCTIONS

13. TOUCHSCREEN DISPLAY FOR DISC PLAYBACK

In DVD state,press this area,it will appear touch functions icon.

INSTRUCTIONS

8. OSD

In playing mode, short press OSD on remote control to show all information of present disc.

9. Number Buttons

In VCD mode, press 0-9 number button to input song. For example, you want to choose 13th song, press 10+ button, and then press 3 button once to play 13th song.

Note: This function can only be worked by the remote control.

10. Repeat Play

In playing mode, press AMS/RPT button on remote control, to startup following, repeat function. Single song repeat??? Repeat play off.

Note:

1)When playing VCD disc, if PBC is on, no repeat function.

2)After unit is power off or mode is switched to other playing mode except VCD mode. if you switch back to VCD mode, repeat playing will be cancelled.

11. Randomly Play

In VCD mode, press LOC/RDM button on remote control, to instantly play each song. Press again to back to the normal play.

Note: When VCD disc, if PBC is on, RDM will not work.

12. Switch Track

In VCD mode, press AUDIO button on remote control to switch track as following sequence: Left Right Stereo

13. OPEN

Press OPEN button on panel to eject disc.

INSTRUCTIONS

18.VCD BASIC OPERATION

Slide in the VCD disc, it will play it automatically. If the disc is in slot, press DVD touch button on main menu can to play.

1. Pause Play

In playing mode, press button on remote control, or on display to pause. Press again to back to normal play.

2. Stop Play

In playing mode, 1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.

2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.

INSTRUCTIONS

14.DVD MODE

AUDIO SETTING ON TOUCH SCREEN

4. Previous/Next Song Play

In playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.

5. Switch System

In playing mode, short press the BAND/P/N button on remote control, to select PAL, AUTO, NTSC TV system.

Note: This function can only be worked by the remote control.

6. Slow Play

Press SLOW button on remote control to slow play. The level of slow playing is as follows. Sequence is :

PLAY SLOW 1/7 SLOW 1/6

Note: This function can only be worked by the remote control.

7. Zoom In / Zoom Out

Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are

1.This function can only be worked by the remote control.

2.Image which is zoomed in can be moved by up/down/left/right cursor to move.

3.Image which is zoomed out cannot be moved.

Audio selection:

VOL ??? BAS ??? TRE ??? BAL ??? FAD

When using this function, the position bar will be highlighted.

Loud choosing: this function is defined open, when it is touched at the first time, the loud function will be closed, at the same time, yellow light disappear.

EQ mode: Touch the button to change settings:

ROCK ??? POP ??? CLASSIC ??? OFF

Change the listening position

Bass choosing: when touched the button will be yellow, touch this button to exit, touch it again to resume.

INSTRUCTIONS

VIDEO SETTING ON TOUCH SCREEN

You can choose: Brightness, Contrast, Color, Hue, adjust the image effect according to your sight. The blue bar will show your level.

Video mode: When using this

function, the position will be darker

on the screen.

Image mode: You can choose the area in the broken line on the panel, standard, defined, soft, according what you need to choose, the blue back light will disappear.

INSTRUCTIONS

INSTRUCTIONS

INSTRUCTIONS

15.RDS USER OPERATION

Press PTY, when PTY is on, it means there is strong RDS signals output.

Press this button to choose radio channels' name, please refer to details user manual.

Press this button to close sound output, re-press this button to resume sound.

Short press on this button to decrease radio frequency; longer press on this button to seek radio channels frequency decreased direction.

Short press on this button to increase radio frequency; longer press on this button to seek radio channels frequency increased direction.

Touch this area to enter & exit main menu.

Press ???SEL??? to adjust other functions, please refer to pic 3.

In the radio state, press ???APS??? button, it will automatically seek radio channels in the whole band and preset the strongest radio channels.

Press this button to adjust angles of the

monitor.

Press this button each time, it will automatically execute the following operation in an

order of FM1 ??? FM2 ??? FM3 ??? AM1 ??? AM2

Press TA, when TA is on, it means the unit is automatically track RDS radio channels.

INSTRUCTIONS

RDS

1. EON (RDS Mark)

Indicate main unit is on auto tracking RDS mode.

2. AF (RDS Auto Tracking Mark)

Indicate radio is auto tracking RDS channel.

3. TA (RDS Signal Increasing Output)

Indicate RDS channel have signal increasing output.

4. TP (RDS Channel Stereo Mark)

Indicate RDS channel is on stereo playing mode.

5. POP.M (RDS Channel Mark)

Indicate RDS channel name.

1. RDS Tracking System

Press AF button in FM mode, and then press / last 2 minutes, RDS will auto search channel up and down, it will stop searching when RDS channel be founded, but ???AF???

will keep remaining on the screen and waits for the next traffic emergency report.

2. RDS Tracking on Playing Mode

In playing mode, ???AF??? tracking system keeps on opening and waits for traffic emergency report.

1) PTY: RDS button, press once will show music mode POP, press 1-6 function memory button, every group have 2 channel.

2) Press PTY button twice and then press 1-6 function memory button, every button have 3 channel.

Note: RDS channel in broken line is available.

AF: RDS auto search button, in radio mode also can press this button shortly auto tracking RDS channel, press this button shortly can cancel RDS function.

TA: In RDS mode, press this button can output TA signal, and check RDS channel is exist or not, if no RDS signal TFT will show ???NO.TA.TP???.

INSTRUCTIONS

INSTRUCTIONS

INSTRUCTIONS

16.RADIO OPERATION

1. Band Selection

In radio mode, press BAND button, BAND/P/N button on remote control, or touch position on screen every time to choose band, the sequence is as follows:

FM1 FM2 FM3

AM2AM1

2. Adjust Frequency

Manually Adjust Frequency:

Press SEEK + button on remote control, or touch button on display shortly every time, frequency will increase one step by one step till you get desired frequency. Press SEEK - button on remote control, or touch button on display shortly every time, frequency will ecrease on step by step till you get desired frequency.

Search Station:

Press SEEK + / SEEK - button on remote control, or / touch button on display shortly every time to search station in up/down direction. When get one station, it will auto stop searching.

3. Browse / Auto Search and Store Station

1)In radio mode, press AMS/RPT button on remote control, or APS button on display shortly to browse preset station on 1-6;

2)In radio mode, press AMS/RPT button on remote control, or APS button on display longer to auto search in whole band from present frequency and store 6 most strong frequency on 1-6;

3)This unit has FM1, FM2, FM3, AM1, AM2 Bands. Each band can store 6 stations, so a total 30 preset stations.

Note: After preset station, unit will cancel the former preset stations.

4. Mono/Stereo Selection

In radio mode, press ST/PTOG button on remote control or ST touch position on display to choose mono/stereo program.

Note: In radio mode, start up the stereo function automatic, touch the ST button again on the display, the TFT display will show the ST OFF & MOMO mark, that is to turn off the stereo. When the right under foot appear the MONO mark, it show the MONO on.

5. Manual Preset and Store Station

In radio mode, press 1-6 button on remote control, or 1-6 position on display longer to store preset frequency into preset channel. For example, the present frequency is 89.8MHz, press 2 button longer, then 89.8MHz frequency is stored in 2 channel.

INSTRUCTIONS

17.DVD BASIC OPERATION

Slide in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch button on main menu to play disc.

1. Pause Play

In playing mode, press button on remote control, or on the display to pause.

Press again to go back to normal play.

2. Stop Play

In playing mode, 1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.

2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.

4. Previous/Next Song Play

In playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.

5. Switch System

In playing mode, short press the BAND/P/N button on remote control, to select PAL,

AUTO, NTSC TV system.

Note: This function can only be worked by the remote control.

6. Slow Play

Press SLOW button on remote control to slow play. The level of slow playing is as follows.

Note: This function can only be worked by the remote control.

7. Zoom In/Zoom Out

Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are as follows:

1.This function can only be worked by the remote control.

2.Image which is zoomed in can be moved by up/down/left/right cursor to move.

3.Image which is zoomed out cannot be moved.

INSTRUCTIONS

INSTRUCTIONS

INSTRUCTIONS

8. OSD

In playing mode, short press OSD on remote control to show all information of present disc.

9. Repeatedly Play

In play mode, press AMS/RPT button on remote control to start up follow repeat function.

10. Angle Switch

If the DVD disc is recorded with multi-angles, you can press the ANGLE button to switch the angle during playing.

The sequence is as follow:

ANGLE 1 ??? ANGLE 2 ??? ANGLE 3 Note:

1.It just can be worked by the remote control.

2.It is only for the DVD disc which has multi-angle.

3.If there is a sign on the cover of the DVD disc. The number in the sign means how many angles the disc has.

4.You can not switch the angle when slow playing.

11.Multi-Audio

There are different languages of dialogue and audio systems in DVD disc.

If the DVD disc is recorded with multi-audio, you can switch the language of dialogue and the audio systems when playing.

Press the AUDIO button repeatedly to change the language of dialogue. Note

1.It just can be worked by the remote control.

2.It is only for the DVD disc which has multi-language.

3.If there is a sign on the cover of the DVD disc, means that it was recorded by multi-language/audio system.

4.In VCD mode, press the AUDIO button to select the L/R or STEREO track.

12.Multi-Subtitle

If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.

Press the sub-t button repeatedly to change the language.

Note:

1.It just can be worked by the remote control.

2.It only for the DVD disc which is recorded with multi-wubtitle.

3.If there is a sign on the cover of the DVD disc means theat it has several subtitle.

13. Title Select

In DVD mode, press TITLE button to back to the title menu. Display shows all the titles of the disc. You can select the chapter you want by the cursor, press play button to play the chapter.

Note: It just can be worked by the remote control.

INSTRUCTIONS

14. MENU Select

In playing mode, press PBC button on remote control to back to the menu, display will show chapter and section in disc. Work with / button on remote control or touch button on display to choose your desired song. Press button / ENTER button to play. Note: This function can only be worked by the remote control.

OPEN: Press OPEN button on panel to eject disc.

15. Program Play

In DVD mode, you can set the sequence of playing by the program function, the operation

When DVD is playing, press ST / PROG button, then display shows:

For example, program the first song, input 01, press button move the cursor to the second lattice, input desired song, for example, the third song. Program the second song, press button, move the cursor to 2 . input 01, press button move the cursor to the second lattice, input desired song, for example, the 6th song (press 6). Press button to program play. Back to the normal mode, press the ST/PROG button, then press button.

Note: This function can only be worked by the remote control.

16. Digital Album

Play the disc contains JPEG pictures, read the picture menu first.

1.Press button on remote control, the pictures will be browsed automatically. (It also can be worked to press number 6 button on the unit.)

2.Press ENTER button on the remote control, it can be manual browsed by SEEK + and SEEK -.

3.ZOOM in picture function: During auto browsing, press pause button stop the screen, press ZOOM button to zoom in or zoom out the picture. During manual browsing, you can press ZOOM button to zoom in or zoom out picture directly.

4.Under zoom in picture, you can move the picture by .

Note: You can not move picture in normal mode and zoom out mode.

17. Setup

Press SETUP button, display will show the system set up menu and the submenu, select the item you want by , after selecting the proper item, press / / / to press ENTER to confirm.

Note:

1.It just can be worked by the remote control.

2.Some function setting maybe different because of the different model or disc.

3.If the selected language is not recorded in the disc, then unit will show the appointed language,

4.About the ???SETUP???, please read the follow.

Press ???SETUP??? on the remote control, it will appear the following touch menu:

INSTRUCTIONS