The FMM???100SAT2CKEX is a high???quality, die???cast metal fire alarm manual station that is UL and FM Listed for use in Class I, Division I, Groups B, C, and D; Class II, Division I, Groups E, F, and G; and Class III (FM Listed only) hazardous locations. It is also marine and NEMA 4X rated for use in harsh environments. It complies with Americans with Disabilities Act (ADA) requirements and meets ADA standards for wheelchair access when properly installed.

Functions

Operation

When the bar on the front of the manual station is pulled, it latches open and is easily visible from 50 ft (15 m). Reset the activation bar by opening the manual station with the key and placing the activation bar in its normal upright position. An optional scored acrylic break rod is provided.

Certifications and Approvals

Signal Communications Corp. holds these listings and approvals:

Installation/Configuration Notes

Compatibility Information

Compatible with all Bosch Security Systems, Inc. Fire Alarm Control Panels.

Mounting Considerations

The FMM???100SAT2CKEX Explosion???proof Manual Station must be surface mounted on a flat wall. It has two conduit entries. Any conduit entry that is not used must be plugged.

To comply with ADA standards, the manual station must be less than 48 in. (1.2 m) above the floor for front wheelchair access and less than 54 in. (1.3 m) above the floor for side wheelchair access.