1. Wheel Assembly . . . . . . . . . . . . . . . . . . . . . 56-01-378

8 mm Stainless Steel Washer

Step

1

Attach wheel assembly during heater assembly

Note: Attach wheel assembly to base prior to attaching the weight plate.

A.Attach wheel assembly to base using 2 sets of wheel bolts (A), wheel washers (C) and wheel nuts (B).

B.Continue heater assembly in Owner???s Manual.

Attach wheel assembly after heater is assembled

A.Lay heater on its side. Be careful not to damage your dome. Support the post on a box or other sturdy item.

B.Remove weight plate, if needed.

C.Attach wheel assembly to base using 2 sets of wheel bolts (A), wheel washers (C) and wheel nuts (B).

D.Reassemble weight plate, if removed.

E.Stand heater upright.

B

A

C