3

Intended use

Your Black & Decker steam mop has been designed for sanitising and cleaning sealed hardwood, sealed laminate, linoleum, vinyl, ceramic tile, stone and marble floors and for refreshing carpets. This appliance is intended for indoor household use only.

Safety instructions

@Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instruc- tions listed below may result in electric shock, fire and/or seri- ous injury.

@Warning! When using mains- powered appliances, basic safety precautions, including the following, should always be fol- lowed to reduce the risk of fire, electric shock, personal injury and material damage.

uRead all of this manual carefully be- fore using the appliance.

uThe intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

uRetain this manual for future refer- ence.

Using your appliance

u Do not direct steam at people, ani- mals, electrical appliances or electrical outlets.

u Do not expose to rain.

u Do not immerse the appliance in water. u Do not leave the appliance unattend-

ed.

u Do not leave the appliance connected to an electrical outlet when not in use. u Never pull the power lead to discon- nect the appliance from the socket. Keep the appliance lead away from

heat, oil and sharp edges.

u Do not handle steam cleaner with wet hands.

u Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or expose cord to heated surfaces.

u Do not use appliance in an enclosed space filled with vapour given off by oil-base paint thinner, some moth- proofing substances, flammable dust, or other explosive or toxic vapours.

u Check the type of floor with the manu- facturer.

u Do not use on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steam-sensi- tive materials.

@ Warning! Do not use on unsealed wood or unsealed laminate floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an iso- lated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer.

u Never put descaling, aromatic, alco- holic or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.

u If the home circuit breaker activates while using the steam function, dis- continue product use immediately and contact the customer support centre. (Beware of the risk of electrical shock.)

u The appliance emits very hot steam to sanitize the area of use. This means that the steam head, cleaning pads and carpet attachment get very hot during use.

u Caution! Always wear suitable shoes when using your steam mop and when changing the accessories on your steam mop. Do not wear slippers or open toed footwear.

u The lid may become hot during use. u Steam may escape from the appliance

during use.

uCare should be taken when using this appliance. DO NOT touch any parts which may become hot during use.

uSwitch the appliance off and return the handle to the upright position before removing the water tank.

uFor floor use only; do not use the unit upside down. This appliance is intend- ed for indoor household use only.

After use

u Unplug the appliance and allow to cool before cleaning.

u When not in use, the appliance should be stored in a dry place.

u Children should not have access to stored appliances.

Inspection and repairs

u Unplug the appliance and allow to cool before performing any maintenance or repairs.

u Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may af- fect its operation.

u Regularly check the power lead for damage.

u Do not use the appliance if any part is damaged or defective.

u Have any damaged or defective parts repaired or replaced by an authorized repair agent.

u Never attempt to remove or replace any parts other than those specified in this manual.

Safety of others

u This appliance can be used by children aged from 8 years and above and persons with reduced physical, sen- sory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

u Children should be supervised to ensure that they do not play with the appliance.

Residual risks.

Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include:

u Injuries caused by touching any mov- ing parts.

u Injuries caused by touching any hot parts.

u Injuries caused when changing any parts or accessories.

u Injuries caused by prolonged use of the appliance. When using any appli- ance for prolonged periods ensure you take regular breaks.

Electrical safety

@Warning! This prod- uct must be earthed. Always check that the power supply corre- sponds to the voltage on the rating plate.

Power plugs must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will reduce risk of electric shock.

u If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Extension cables & Class 1 product

u A 3-core cable must be used as your appliance is earthed and of Class 1 construction.

u Up to 30m (100 ft) can be used without loss of power.

Labels on the appliance

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must read the instruction manual.

Warning! Danger of scalding.

Features

This appliance includes some or all of the following features.

1.ON/Off switch

2.SmartselectTM button

3.Removable water tank

4.Handle

5.Steam head

6.Steam head cleaning pad

7.Delta head cleaning pad

8.Resting mat

9.Carpet glider

10.Bottom cable tidy hook

11.Top cable tidy hook

12.Cable management clip

Assembly

Warning! Before attempting any of the following operations, make sure that the appliance is switched off and unplugged and that the appliance is cold and does not contain any water.

Attaching the handle (Fig. A)

???Slide the bottom end of the handle (4) into the top end of the steam mop body (13) until it clicks into place.

Attaching the steam head (Fig. B)

???Slide the bottom end of the steam mop body (13) onto the steam head (5) until it clicks into place.

???The steam head can be removed from the Steam mop body by pressing the steam head release button (14) and pulling the steam mop body (13) off the steam head (5).

Attaching the water jug (Fig. C)

???Clip the water jug (3) onto the handle (4).

???Slide the water jug (3) down into the Steam mop body

Attaching a cleaning pad (Fig. D)

Replacement cleaning pads are available from your Black & Decker dealer:- (cat. no. FSMP20-XE).

???

loop??? side facing up.

???Lightly press the steam mop down onto the cleaning pad (6 or 7).

Caution! Always place your steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Removing a cleaning pad (Fig. E)

Caution! Always wear suitable shoes when changing the cleaning pad on your steam mop. Do not wear slippers or open toed footwear.

???Return the handle (4) to the upright position and turn the steam mop ???OFF???.

???Place the steam mop on the resting mat and wait until it

???Place the front of your shoe onto the cleaning pad removal

???Lift the steam mop up off the cleaning pad.

Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Attaching the carpet glider (Fig. F)

???

???Lightly press the steam mop down onto the carpet glider

(9)until it clicks into place.

Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Removing the carpet glider (Fig. F)

Caution! Always wear suitable shoes when changing the carpet glider on your steam mop. Do not wear slippers or open toed footwear.

???Return the handle (4) to the upright position and turn the steam mop ???OFF???.

???Place the steam mop on the resting mat and wait until it

???Place the front of your shoe onto the carpet glider removal

???Lift the steam mop up off the carpet glider (9).

Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

The Delta Head (Fig. G)

This Steam Mop incorporates a built in delta head which enables you to access into tight corners and narrow gaps. Caution! Always wear suitable shoes when accessing the delta head on your steam mop. Do not wear slippers or open toed footwear.

???Return the handle (4) to the upright position and turn the steam mop ???OFF???.

???Place the steam mop on the resting mat and wait until it

???Place the front of your shoe onto the steam head removal tab (18) and press down gently.

???Lift the delta head (17) up off the steam head (5).

???Fit the delta head cleaning pad to the bottom of the delta head.

Note:

head to the steam head.

???

delta head clicks into place.

Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Filling the water tank (Fig. H)

The watertank on your steam mop is removable for convi-

This Steam Mop incorporates an anti-calc system to help prolong the life of the system.

Note: Fill the water tank with clean tap water.

Note: In areas of very hard water, the use of de-ionised water is recommended.

??? Remove the water tank (3).

???

(20).

??? Fill the water tank (3) with water.

Warning! Your water tank has a 0.5 litre capacity. Do not over

???

???

Note:

Use

Important! This unit will kill 99.9% of bacteria & germs when

Switching on and off

???To switch the appliance on, press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up.

Note:-

ervoir will glow red. Once the steam mop is ready to use the water reservoir will glow blue.

??? To switch the appliance off, press the ON/OFF button (1). Caution! Never leave the steam mop in one spot on any surface for any period of time. Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Caution! Always empty the steam mop after use.

SmartselectTM Technology (Fig. J)

SmartselectTM button (2) which shows various cleaning applications. They are used to select the correct operating mode for your particular cleaning operation.

Using SmartselectTM , choose from one of the following applic- ations by pressing the smartselect button (2) until the required setting is selected:

Wood/Laminate

Stone/Marble

Tiles/Vinyl

The steam mop will select the correct volume of steam required for your particular cleaning operation.

Note: Always check you are using the correct setting before using your steam mop. For convienience the steam mop will remember the last setting you chose.

Steam burst (Fig. I)

The steam mop is equipped with a steam bust button to aid in the removal of stubborn marks and stains.

???During use, press the steam bust button (21) to apply extra cleaning power.

Note: The stem burst will last for 10 seconds then the stem mop will return to the chosen setting.

Hints for optimum use

General

Caution! cleaning pad.

???During use you can use the cable mamagement clip (11) to keep your cable out of the way of the work area..

???

mop.

???The easiest way to use the machine is to tilt the handle to a 45?? angle and clean slowly, covering a small area at a time.

???Do not use chemical cleaners with your steam mop. To

can use the steam burst button to apply extra steam to the area or pre-treat with a mild detergent and some water before using the steam mop.

Steam cleaning

???

loop??? side facing up.

???Raise the steam mop off the resting mat (8) and lightly press it down onto the cleaning pad (6 or 7).

???Place the steam mop on the resting mat.

???Connect the steam mop to the mains.

???Press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up.

???Press the SmartselectTM button (2) till the required setting is reached.

???Pulling the handle (4) back will activate the steam pump. After a few seconds steam will start to come out of the steam head.

???It takes a few seconds for steam to enter the cleaning pad. The steam mop will now glide easily over the surface to be sanitised/cleaned.

???

thoroughly steam clean each section.

Note: During use you may turn off the steam pump by return- ing the handle to the upright position, this convenient feature will allow you to place the steam mop on the resting mat for a short time so that you may move items of furniture, then continue cleaning without the need to switch the appliance off.

???

handle (4) to the upright position and turn it ???OFF???, place it on the resting mat (8) and wait until the steam mop cools

Caution! It is important to monitor the water level in the water

return the handle (4) to the upright position and turn the steam mop ???OFF???. Unplug the unit from the electrical wall outlet,

Caution! Never leave the steam mop in one spot on any surface for any period of time. Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Carpet refreshing

???

loop??? side facing up.

???Raise the steam mop off the resting mat (8) and lightly press it down onto the cleaning pad (6 or 7).

???

???Lightly press the steam mop down onto the carpet glider

(9)until it clicks into place.

???Place the steam mop on the resting mat. (8)

???Connect the steam mop to the mains.

???Press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up.

???Press the SmartselectTM button (2) to the Wood/Laminate setting.

???Pulling the handle (4) back will activate the steam pump. After a few seconds steam will start to come out of the steam head.

???Push and pull the steam mop slowly across the carpet to thoroughly refresh each section.

Note: During use you may turn off the steam pump by return- ing the handle (4) to the upright position, this convenient feature will allow you to place the steam mop on the resting mat (8) so that you may move items of furniture with out the need to switch the appliance off.

???

handle (4) to the upright position and turn it ???OFF???, place it on the resting mat (8) and wait until the steam mop cools

Caution! It is important to monitor the water level in the water

return the handle (4) to the upright position and turn the steam mop ???OFF???. Unplug the unit from the electrical wall outlet,

Caution! Never leave the steam mop in one spot on any surface for any period of time. Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

After use (Fig. J & K)

???Return the handle (4) to the upright position and turn the steam mop ???OFF???,

???Place the steam mop on the resting mat (8) and wait until

???Unplug the steam mop from the electrical wall outlet.

???Empty the water tank (3).

???Remove the cleaning pad (6 or 7) and wash it ready for next use. (Take care to follow the wash care instructions printed on the cleaning pad).

???Wrap the supply cable around the cable tidy hooks (10 & 11).

Note: The top cable tidy hook (11) rotates to easily release the cable ready for next use.

???Clip the supply cable onto itself using the cable tidy clip

(22)close to the plug.

???Place steam mop on the resting mat (8) for storage. Note: With the handle (4) in the upright position, the cable

neatly wrapped around the cable tidy hooks (10 & 11) and secured with the cable tidy clip (22) your steam mop will stand on its own for storage. Alternatively there is a hanging bracket (23) built into the hand grip (24) which will allow your steam mop to be hung from a suitable hook on the wall. Always ensure that your wall hook is capable of supporting the weight of the steam mop safely.

Maintenance and cleaning

Your Black & Decker corded appliance has been designed to operate over a long period of time with a minimum of main- tenance. Continuous satisfactory operation depends upon proper appliance care and regular cleaning.

Warning! Before performing any maintenance or cleaning on corded appliances switch off and unplug the appliance.

???Wipe your appliance over using a soft damp cloth.

???For stubborn marks you can use a mild solution of soap and water to dampen your cloth.

Care of the cleaning pads

Wash care instructions - No fabric conditioner - Allow to dry fully before re-use.

Caution! Follow the cleaning instructions printed on the label of the cleaning pad.

Protecting the environment

Z Separate collection. This product must not be disposed of with normal household waste.

needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product avail- zable for separate collection.

Local regulations may provide for separate collection of elec- trical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Technical data