A.Introduction

Thank you for selecting the DPF908 Digital Photo Frame. The main features include a 9" Screen (16:9 Aspect Ratio) Liquid Crystal Dis- play (LCD) monitor. The unit applies the latest state of the art elec- tronics and is designed for use with SD/MMC/MS/CF/xD memory cards and USB memory devices. The unit is constructed to provide years of reliable, trouble-free service. Please read the entire instruc- tion manual supplied with this product prior to operation. The docu- mentation will assist you in obtaining the best equipment performance. All manuals should be stored for later use.

B.Cautions and Warnings

1. Placement

To prevent fire or electric shock, do not expose the DPF to rain or moisture. To prevent it from falling do not place the DPF on an unstable cart, stand, tripod, bracket or table. Keep the unit away from strong magnets, heat sources, direct sunlight, and exces- sive dust.

2. Installation

Ensure that the DPF is used in accordance with the instructions and illustrations provided in this manual.

3. Objects and Liquid

Do not push objects of any kind into the unit through openings; do not spill or spray liquid of any kind on or in the DPF (this may result in a fire or electric shock). Do not place anything heavy on the DPF. To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other material.

4. Disassembly

Do not attempt to disassemble the DPF. There is a risk of electric shock. Contact qualified service personnel if your system is in need of repair.

5.Cleaning Unit

When cleaning, make sure the DPF is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the DPF only.

2

C. Contents

1.1 x 9??? Digital Picture Frame w/Battery (CR2025)

2.1 x AC to DC Adaptor

3.1 x Remote Control w/Battery (CR2025)

4.3 x Interchangeable Frame (Black/White/Wood Grain)

5.1 x Instruction Manual

D. Positioning Your Frame

Pull out the stand to place the frame. Rotate the stand to position the frame vertically or horizontally. Adjust the stand???s length to obtain the desired vertical or horizontal viewing angle.

3

E. Unit View

Left and Right Side

Note: The USB slot can not be connected to a PC for transferring pictures from the PC to the DPF.

Front Side

IR Sensor

4

Back Side

1)Brightness: Press to adjust the Brightness.

2)Play/Pause/Mode: Press to PLAY/PAUSE or select an option.

3)Menu: Press to access the main menu.

4)Up/Copy/Delete: Press to navigate, copy or delete a photo.

5)Down/Rotate: Press to navigate or rotate a photo.

6)Prev. : Press to navigate or view the previous photo.

7)Next: Press to navigate or view the next photo.

5

F. Remote Control

MENU

6

G.Viewing Photos

1.Attach the AC / DC adapter to the DC power jack and plug the adapter into an AC outlet.

2.Place the unit???s Power switch to the ON position and wait for the to display the Main Menu.

3.Insert the desired Media into the unit???s SD/MMC/MS USB or CF slots provided.

4.Using the LEFT / RIGHT arrow keys position the high- light over the PHOTO icon and press the MENU button.

5. Select the desired media by using the unit???s LEFT / RIGHT arrow keys to position the highlight. Once the desired media is highlighted press the PAUSE / PLAY / MODE button to confirm your selection.

Note: Only the media installed in the unit will be allowed to be se- lected.

6.With the Main Menu displayed use the unit???s LEFT / RIGHT arrow keys to position the highlight over the PHOTO icon and press the PAUSE / PLAY / MODE key. The unit will enter SLIDE SHOW mode and will sequentially display the photos saved on the selected media.

7

7.Pressing the PAUSE / PLAY / MODE key while the unit is in the SLIDE SHOW mode will results in the unit entering

the PAUSE mode. Once the unit is in the PAUSE mode the operator can use the LEFT / RIGHT arrow keys to display the PREVIOUS / NEXT photo.

8.Selecting PAUSE / PLAY / MODE again will place the DPF in the Thumbnail mode. In this mode the unit displays rows of thumbnail pictures. Once in this mode the operator can use the UP / DOWN / LEFT ARROW / RIGHT ARROW keys to navi gate through the pictures. When the desired picture is highlighted pressing the PLAY / PAUSE / MODE key again will result in the DPF starting the SLIDE SHOW from the highlighted picture.

H.Copying and Deleting Photos

Copying Photos to Internal Memory

Please refer to step ???G??? first. If you want to copy the photo, place the DPF in PAUSE mode when the desired picture is displayed. Then press the UP/COPY/DELETE button. A pop-up screen ap- pears indicating ???Copy? Yes/No??? use the Left or Right button to highlight the Yes icon, then press PLAY/PAUSE/MODE button to confirm. ???Wait!Capture Photo??? appears as the photo is copied into the internal memory. The DPF can store up to approximately 40 photos.

Note: You can rotate photos clockwise by pressing the ROTATE button on the remote control or the Down button on the frame in the Pause mode. Rotated photos are copied in the rotated position.

8

Deleting Photos from your frame???s internal memory

Press Menu button to bring up the DPF???s main menu. Press the MENU button again to bring up the Card Selection screen. Using the Left or Right button select the Memory icon. Press PLAY/PAUSE/ MODE button to select the DPF???S internal memory. Press PLAY/ PAUSE/MODE button two times to enter the Slide show mode. To delete a photo, select the photo in Slide show mode or Browse mode, then press the UP/COPY/DELETE button. When the Delete pop-up screen appears, use the Left or Right button to highlight the Yes icon, then press PLAY/PAUSE/MODE button. The photo se- lected is deleted.

Note:

DELETE only deletes photos that reside in the DPF internal memory.

9

I.Setting

1)With the Main Menu icons displayed, use the RIGHT or LEFT arrow button to highlight the SETTING icon. Then press PLAY/ PAUSE/MODE to select and enter the setting screen .

2)Use the UP and DOWN buttons to select the menu item you wish to change. Press PLAY/PAUSE/MODE to enter the submenu.

3)Select the option you wish by using the UP/DOWN buttons. Once the desired option is highlighted press the PLAY/PAUSE/ MODE key to select it. When more than one parameter ap- pears in the submenu, the current parameter in effect is high- lighted with a check to the left of the parameter.

The setting items and their definitions are shown below:

10

J. Calendar Function

With the main menu icons displayed, use the LEFT/RIGHT button to highlight the CALENDAR icon and press the PLAY/PAUSE/MODE button. Use the LEFT and RIGHT buttons to view the days; use the UP and DOWN buttons to view the months and year.

To Set Date in Calendar Mode

Press the PLAY/PAUSE/MODE button, a pop-up screen appears as shown below:

Use the LEFT or RIGHT button to select the Year, Month or Day. Press the UP or DOWN button to change the digit. Continue pressing the LEFT or RIGHT button to highlight and make changes to other items. After a change is implemented, use the LEFT or RIGHT button to highlight the OK icon, then press PLAY/PAUSE/MODE to confirm.

11

K. Clock Function

With the Main Menu icons displayed, use the LEFT/RIGHT button to highlight the CLOCK icon and press the PLAY/PAUSE/MODE button.

How to Set Time

To make changes to the Time, press the PLAY/PAUSE/MODE button. The pop-up screen shown below will appear.

Use the LEFT or RIGHT arrow button to select Hour, Minutes or AM/ PM. Press the UP or DOWN button to change the digit. Continue pressing the LEFT or RIGHT arrow button to highlight and make changes to other items. After all changes have been implemented, use the LEFT or RIGHT button to highlight the OK icon. Press PLAY/ PAUSE/MODE to confirm.

12

L. Removal and Installation Interchangeable Frames

Remove

Remove the current frame attached to the unit. Refer to the illustra- tion below:

Press here then remove the cover.

Installation

Please refer to the illustration below:

Insert the unit into the left cover slots first then lower the right side of the unit until it comes in contact with the frame. Press the plastic frame on the right of the unit. The lock position is indicated by a click.

13

M. SPECIFICATIONS

Photo format: JPEG

Panel size: 9 Inch

Power source: DC 9V

Power consumption: 5 W

Operating temperature: 41~95??F, 5~35??C

Weight : 0.78 Kg

Dimensions (W x H x D): 12.6 X9.02 X 1.34 inches 317 X 229 X 34mm

14

N. Troubleshooting

15