LCD TV

Owner's Manual

FPE3000

Before operating the unit, please read this manual thoroughly.

128-7081

Contents

Congratulations on your purchase of this LCD TV.

We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV.

Retain this manual in an easily accessible location for future reference.

Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility.

Contents

2

Important Safety Cautions

When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area.

Do not expose this unit in the rain or spatter by liquid. Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards.

Heat sources-Keep the product away from heat sources such as radiators, heaters, stoves and other heat generating products (including amplifiers).

Requirement of environment temperature: 20oC~50oC for storage; 0 oC~40oC for working

The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product.

Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings.

This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed.

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a trolley, stand, tripod, and bracket or table recommended by the manufacturer or sold with the product.

5

Back

+12V

+5V

RL

HDTV

AV

9

Identification of controls(continued)

Remote Control

10

11

Antenna connection

CABLE TV (CATV) CONNECTION

A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal.

Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.

This converter/descrambler is necessary for normal viewing of the scrambled channels. For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. Please note: An RF switch provided with two inputs (A and B) is required (not supplied).

RF switch (not supplied)

Two-set signal

splitter Cable TV Line (not

supplied)

Cable TV converter/ descrambler (not supplied)

"A" position on the RF switch (not supplied) : You can view all unscrambled channels by using theTV's channel keys.

"B" position on the RF switch (not supplied) : You can view the scrambled channels via the converter/descrambler by using the converter's channel keys.

Note: Consult your Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.

ANTENNAS

The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various antenna systems.

12

Installation

Power connection

Before using this equipment, please connect the AC power adapter correctly.

Household power outlet

Plug into AC outlet.

AC cord

AC power adapter

1.Connect the female plug to the AC socket onAC adapter.

2.Connect the AC adapter to the DC power input of the set.

3.Connect the male plug to the wall outlet as illustrated.

Notes:

+This product should be operated only from the type of power source indicated on the marking label.

+Always unplug the AC adapter from the product and power outlet when not using for a long period of time.

13

Installation(continued)

Elevation adjustment

You can adjust the angle of the LCD TV as follows. The elevation can be adjusted from -5o to +10o.

18

Press MENU button to call up menu, press MENU button repeatedly to select different menu pages. In MENU

operations, the CH5/6buttons are used to select item Menu Introduction upwards or downwards; the VOL+/- buttons are used to

SETUP menu

CHANNEL SETTING menu

19

Menu Introduction(continued)

CCD and Vchip settings menu (in TV mode)

Press to switch between Caption, text and TV

CCD and Vchip SETTINGS

Input the password

<LEFT/RIGHT> move, <Menu> return, <Enter> execute

20

Turning On/Off / Selecting input signal

Turning On

TV

1.Connect the power, the red indicator lights up, the set is in STANDBYmode.

2.Press the POWER button on the unit's control panel or the button on the remote control to turn the set on.

Turning Off

With the power on, press the POWER button to turn off the set, and the set is in standby mode.

* Always unplug theAC adapter from the product and power outlet when not using for a long period of time.

Notes:

This TV set can automatically turn off by:

1. When there is no TV signal input for about 15 minutes; 2. Sleep timer.

Selecting input signal

1. Press the button on the remote control or SOURCE button on the set's panel to select input mode. You can select TV, AV, S-video, YCbCr, YPbPr or PC.

2.If you want to go to TV mode, press button repeatedly to select TV mode.

3.Press DSP button, the screen display current mode. Press ENTER to cancel OSD.

21

Operations in TV mode

Channel Preset

To enter into CHANNEL SETTING menu

Auto Search

Please enter into CHANNEL SETTING menu and select Auto Search item.

Press VOL- or VOL+ button to start Auto Search and all active programs will be memorized.

Adding and skipping channels

After auto search, you can add or skip channels as follows:

Select a channel to be added or skipped by direct channel select buttons.

22

Channel Select

Use 0-9 digit buttons to select one-digit channel number.

To select two-digit channel:

To select three-digit channel:

Note: the period of two-press should be within 3 seconds.

Use CH5/6 button

Press CH5button, the channel number increases;

Press CH6button, the channel number decreases.

Use previous channel button

Press this button to switch between the current channel and previous channel.

23

Picture adjustment

The adjusted settings are stored in the User mode.

There are three preset picture modes and one User-set picture mode. Press the P.M button to select a picture mode according to your favorites.

4. Press P.M button to select picture mode.

You can quickly select picture mode by P.M button. There are four picture mode: Bright, Standard, Mild and User mode.

Bright: Select for a bright picture.

Standard: Select for a normal picture.

Mild: Select for a fine/soft picture.

Adjusted settings are stored in User mode.

Using STILL button

You can still current screen picture by pressing STILL button on the remote.

Using AUTO.ADJ button

Press AUTO.ADJ button on the remote to adjust picture for best

viewing.

*To exit the menu, press ENTER button.

24

Sound adjustment

<LEFT> or <RIGHT> key to change

Notes:

!You can quickly adjust Bass and Treble by using Bass+/ Bass- and Treb+/Treb- buttons on the remote.

!You can quickly select audio mode by MTS button.

Adjusting Volume

You can use VOL+ or VOL- button to adjust volume.

Press VOL+ button, the volume increase;

Muting the sound

If you want to mute the sound, press button on the remote.

To resume the sound, press this button again or you can also press VOL+ or VOL- to resume the sound.

*To exit the menu, press ENTER button.

25

System setup

To enter into SETUP menu

<LEFT> or <RIGHT> key to change

You can quickly access Color system menu bar by C.SYS

*This is an advanced setting and should not be touched.

Setting OSD Language

<LEFT> or <RIGHT> key to change

*To exit the menu, press ENTER button.

26

System setup(continued)

Setting Scaler mode

This unit allows you to adjust screen aspect ratio in your preference.

Press ZOOM button on the remote toAnamorphic select a proper screen aspect ratio.

Anamorphic, 4:3 and Panorama can be

selected.

Notes:

You can quickly select screen ratio by using ZOOM button on the

Remote Control

*To exit the menu, press ENTER button.

27

Timer setting

Use SLP button

Press SLP button repeatedly to set sleep time between: 0, 10, 20, 30, 60, 90,120,180,240 minutes. If you select 0 minute, it means the sleep timer function is turned off.

Use CLK button

28

CCD setting

*To exit the menu, press ENTER button.

29

V-chip setting

V-Chip enables parents to prevent their children from watching inappropriate material on TV. V-Chip reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals ), then denies access to programming if the program's rating meets the limitations you select. In this case, the program will be blocked.

To enter into RATING SETTING menu

*G and Above (general audience)

*PG and Above (parental guidance suggested)

*PG-13 and Above (13 years and up)

*R and Above (restricted)

*NC-17 and Above (18 years and up)

*X (adult)

If you set PG-13, G and PG movies will be available, and PG-13, R,

NC-17 and X will be blocked.

*To exit the menu, press ENTER button.

30

V-chip setting

TV RATING setup

TV Parental Guidelines may have one or more letters added to the basic rating to let parents know when a show contains higher levels of violence, sex, adult

You can also block the criteria for each level for FV, V, S, L, D.

4.Enter a new 4-digit password and validate again. Then highlight OK and press ENTER. The password has been modified successfully.

If you have failure in inputting the password, you can move the cursor to highlight Cancel and press ENTER button to cancel it.

31

Adjustment in YPbPr mode

To enter into YPbPr mode

Repeatedly press button on the remote control or SOURCE button on the set's panel until the screen display YPbPr, which indicates that the set is in YPbPr mode. Connect the YPbPr terminals to Set Top Box and make sure there is signal input.

Adjusting picture

In YPbPr mode when there is correct input signal, press MENU button and

PICTURE SETTING menu appears. Use CH5/6to select item and

VOL+/- to adjust.

Adjusting horizontal / vertical position

Press MENU button twice and the PICTURE POSITION menu appears. Use CH5/6to select item and VOL+/- to adjust.

*To exit the menu, press ENTER button.

32

Adjustment in PC mode

33

Adjustment in PC mode (continued)

You can adjust brightness and contrast in PC mode and this adjustment does not affect the brightness and contrast in TV and AV mode.

*To exit the menu, press ENTER button.

34

Specifications

41

PRINTED IN

RECYCLED PAPER

128-7081

43