American_DJ_Indoor_Furnishings

American DJ??

User Instructions

Unpacking: Thank you for purchasing the Titan??? by American DJ??. Every Titan??? has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return the unit to your dealer without ???rst contacting customer support.

Introduction: Thank you for purchasing the American DJ?? Titan.??? The Titan??? is a unique multi-colored effects ???xture. The unit comes with a glass ???lter that may be remove to create two entirely different effect. This unit creates multi-colored beams in a ???at fan shape. When the unit is used with the included glass ???lter the beams can give the rippling effect of water. The unit has 3-way mode switch that allows the unit to be operated in three different modes (see page 7 for operating modes). To optimize beam intensity use this ???xture with a fog machine or other type of special effect smoke.

Customer Support: American DJ?? provides a toll free customer sup- port line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.americandj.com for any com- ments or suggestions. For service related issue please contact Ameri- can DJ??. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Paci???c Standard Time.

Warning! To prevent or reduce the risk of electrical shock or ???re, do not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures war- ranty. In the unlikely event your unit may require service please contact your nearest American DJ dealer.

PLEASE do not discard the shipping carton in the trash. Please recycle when ever possible.

??American DJ?? - www.americandj.com - Titan??? Instruction Manual Page 2

Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit. These instructions contain important safety information regarding the use and mainte- nance of this unit. Please keep this manual with the unit, for future ref- erence.

???Removable Beveled Glass Dish

???Easy Lamp Replacement

???Compact High-Tech Case Design

???Built-In Hanging Yoke

???Internal Microphone

???Fan Cooled

???Multi-Colored Beams

???3-Way Effects Switch - 3 Operating Modes

???Sound Active

???Multi-Colored Effect Wheel

The Titan??? carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty you must provide a copy of your proof of purchase invoice. Please contact American DJ?? customer support for a R.A. number.

Halogen Lamp Warning! This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch the lamps with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions.

??American DJ?? - www.americandj.com - Titan??? Instruction Manual Page 3

Safety Issues: This unit may blow a fuse if the maximum allotted load of 3 amps is reached. If the fuse needs replacement, always replace the fuse with same exact type that was remove, unless other- wise instructed by an authorized American DJ?? service technician. Use of a different type fuse from that which is recommended may cause fire or electric shock and will void the manufactures warranty.

???To reduce the risk of electrical shock or ???re, do not expose this unit rain or moisture

???Do not spill water or other liquids into or on to your unit

???Do not attempt to operate this unit if the power cord has been frayed or broken

???Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and ???re in case of an internal short

???Disconnect from main power before making any type of connection

???Do not remove the cover under any conditions. There are no user serviceable parts inside

???Never plug this unit in to a dimmer pack

???Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6??? (15cm) between this device and a wall

???Do not attempt to operate this unit, if it becomes damaged

???This unit is intended for indoor use only, use of this product outdoors voids all warranties

???During long periods of non-use, disconnect the unit???s main power

???Always mount this unit in safe and stable matter

???Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them.

???Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 7 for cleaning details

???Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

???The fixture should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged.

B.Objects have fallen, or liquid has been spilled into the unit.

C.The unit has been exposed to rain or water.

D.The unit does not appear to operate normally or exhibits a marked change in performance.

??American DJ?? - www.americandj.com - Titan??? Instruction Manual Page 4

1.Mirror - This is a highly re???ective surface mirror speci???cally designed to optimize and enhance beam output. Never use glass cleaner that contains ammonia to clean the surface of the mirror (such as Windex).

2.Lens - This is a fully focusing high quality lens. Focus the lens by manually turning the lens in a clockwise or counter-clockwise direc- tion.

3.Glass Filter - This unit comes with a built-in glass ???lter. This ???lter may be removed at any time for a completely different effect. To remove the ???lter unscrew the retaining thumb screw and gently pull the ???lter out.

4.Lamp Assembly - This assembly holds a LL-EFR 15v/150w lamp.

5.Lamp Assembly Retaining Screws - These two screw hold the lamp assembly in place.

6.Lamp Assembly Cover - This plate accesses the lamp socket assembly. This cover is held securely in place by a single thumb screw

(7).

7.Lamp Cover Retaining Screw - This thumb screw holds the lamp socket assembly cover (6) into place

8.Function Switch - This is a 3-way function switch. This unit can be operated in three different mode all of which are controlled by this switch.

9.Microphone - This microphone receives external low frequencies to trigger the unit in Sound-Active and Master/Slave mode.

10.Fan - Cooling fan. For optimal performance keep this fan grill clean at all times.

11.Fuse Holder - This housing stores the protective 3 amp fuse. Always replace with the same exact fuse.

12.Power Cord - Connect only to a matching power outlet. Never use this ???xture is the ground prong has been removed or broken off.

Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your American DJ?? Titan??? before attempting operation.

General Operation: Just plug this light in, and watch it go. This fixture is designed to operate as a stand alone unit. It has been tested and the lamp has been installed at the factory there is no assembly necessary. The Titan??? is ready to be plugged in, out of the box. There is no power switch, after plugging the unit the unit???s internal beveled glass wheel will rotate continuously in a single direction, while the outside color dish will rotate back and forth to the beat of music. The unit will create multi-colored patterns. If there is no lamp output check the fuse and bulb. If the fuse and bulb are good, please return the unit for servicing.

Operating Modes:

This unit comes with a 3-way multi-operating switch located on the rear of the unit. The switch controls three different operating modes; Static, Sound Active, and Continuous Rotation.

Switch in the "I" position: Mode 1 - In this mode the internal glass dish and the external multi-mirror dish will spin continuously in clockwise direction, regardless of the presence of sound.

Switch in the ???0??? position: Mode 2 - In this mode the internal glass dish will continuously rotate while the external multi-mirror dish will remain static. In this mode the unit may be used as a projector.

Switch in the ???II??? position: Mode 3 - In the this mode the internal glass dish will continuously rotate in one direction while the outer multi- mirror dish will react to sound. Please note that tapping on the unit, or high pitched sounds may not trigger the unit, the unit is designed to react to low frequencies (bass). Also note that the music sensitivity is preset at the factory and may not be changed or adjusted.

Focusing:

The unit has a fully focusing lens. The lens is focused by manually turning the lens in either a clockwise or counter-clockwise direction.

Caution: Always replace with the exact same type lamp and fuse, unless otherwise specified by an authorized American DJ?? technician. Replace with anything other than the specified part can damage your unit and will void your manufactures warranty.

Warning: If after you have replaced the lamp or fuse and you continue to blow either one, STOP using the unit. Contact customer support for further instructions, you may have to return the unit for servicing. Continuing to use the unit may cause serious damage.

Fuse Replacement: Disconnect the unit???s main power supply. Insert a standard flat head screw driver in to the fuse holder housing (located on the rear of the unit). Turn the screwdriver in a counter-clockwise direction to remove the fuse holder. Remove the old fuse and discard it, replace the fuse with the same type. Insert the fuse holder back into it???s housing and turn in clockwise direction to lock the holder in place.

Lamp Replacement: Caution! Never open the unit when in use. Always disconnect the main power and allow the fixture ample time to cool before attempting to replace the lamp. Lamp replacement has been made simple by incorporating a split dome that is retained by thumb screws. Again, please remember to always replace with the exact same type lamp.

1.Be sure to follow the proper procedures when handling halogen lamps. Never touch the new lamp with your bare fingers.

2.Unscrew the single thumb screw (7) located on the bottom of the unit.

3.Once the thumb screw (7) has been remove, pull back the lamp assembly cover plate (6) to expose the lamp (4).

4.Remove and replace the lamp with an exact match.

5.Reassemble in reverse order.

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out periodically to optimize light output.

1.Use normal glass cleaner and a soft cloth to wipe down the outside casing.

2.Clean the external optics with glass cleaner and a soft

cloth every 20 days.

4.Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.

5.Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom- mend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp beam output.

Trouble Shooting:

Listed below are a few common problems and solutions you should try before contacting customer support.

Unit rotates but has no light output from the unit;

1.Be sure you have connected your unit into a matching wall outlet.

2.Remove the lamp cover and be sure the lamp is seated in its socket properly. Occasionally lamps become loose during shipping be sure the lamp is push in to its socket all the way.

3.Be sure the lamp is good.

Unit does not rotate and lamp does not turn on;

1.Be sure you have connected your unit into a matching wall outlet.

2.Be sure the external fuse has not blown. The fuse is located on the rear panel of the unit.

3.Be sure the unit power cord is properly seated in the power outlet and the outlet has power.

4.Be sure the fuse holder is securely seated in the fuse holder housing.

1 YEAR DAY LIMITED WARRANTY

A.American DJ?? hereby warrants, to the original purchaser, American DJ?? products to be free of manufacturing defects in material and workmanship for a period of one year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner???s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.

B.For warranty service, send the product only to the American DJ?? factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American DJ?? will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, American DJ?? shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.

C.This warranty is void if the serial number has been altered or removed; if the product is modi???ed in any manner which American DJ?? concludes, after inspection, affects the reli- ability of the product; if the product has been repaired or serviced by anyone other than the American DJ?? factory unless prior written authorization was issued to purchaser by Ameri- can DJ??; if the product is damaged because not properly maintained as set forth in the instruction manual.

D.This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period speci???ed above, American DJ?? will replace defec- tive parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American DJ?? under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American DJ??. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E.American DJ?? reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.

F.No warranty, whether expressed or implied, is given or made with respect to any acces- sory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American DJ?? in connection with this product, including warranties of merchantability or ???tness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of mer- chantability or ???tness, shall apply to this product after said period has expired. The con- sumer???s and or Dealer???s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American DJ?? be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.

G.This warranty is the only written warranty applicable to American DJ?? Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

H.Lamps are not covered under this or any other warranty either written or implied.