Precautions

???The monitor may be damaged if placed too near a source of heat. Be aware of the location of radiators, cookers, open fires etc.

???Do not cover the slots and openings on the back or top of the cabinet as the monitor requires ventilation. The monitor should be located in a well- ventilated room to prevent the possibility of overheating.

???Do not allow sharp objects such as knives, pens, or pencils near the screen. If such objects touch the screen, the LCD panel will be permanently scratched.

???When cleaning this monitor, disconnect it from the electric socket to avoid any danger of electrocution. A soft, lint-free cloth should be used to clean the outside of the monitor. A cloth very slightly moistened with a mild detergent solution will clean stubborn stains. Keep liquids away from the display screen, including sprays. Do not spray liquid directly - it is best to lightly spray on to a cloth and wipe. If liquid gets inside the monitor it can cause electrical shock and/or damage to the unit.

???If you encounter a problem, please check the "Troubleshooting" section first. If this does not resolve the problem do not attempt to repair the monitor by yourself; opening or removing covers can lead to injury or death through electrocution among other hazards. Please contact a qualified engineer if you find the troubleshooting section does not help.

English

English

Package contents

User Manual

1.Position the monitor on top of the stand.

2.Connect the stand into the neck of the monitor along the track.

Adjusting the Viewing Angle

The viewing angle of the monitor ranges from 0??~20??.

Caution: Make sure that the computer and the monitor are both disconnected from the power supply.

English

English

Adjusting display settings

External Controls

OSD options

Please refer to "External Controls" on Page 5.

To adjust the OSD settings:

1.Press the MENU button to open the OSD menu.

2.Use the buttons marked < or >, to highlight a control, then press the AUTO button to enter

3.Use the buttons marked < or >, to adjust the control to the desired level.

4.When you have finished making all selections, press the MENU button to exit the OSD. (Or the adjustment will auto-save after 45 seconds.)

OSD Menu

Brightness & Contrast

BRIGHTNESS:

This adjusts the brightness of the picture on the screen.

CONTRAST:

This adjusts dark and light shades of color relative to each other to achieve a comfortable contrast.

Tracking

CLOCK:

If there are any vertical stripes seen on the background of the screen this renders them less noticeable by minimizing their size. It also changes the size of the horizontal screen.

PHASE:

This removes any horizontal distortion and makes the picture clear and sharp.

English

Color

Other Controls

6

V-Position:

This adjusts the vertical.

H-Position:

This adjusts the horizontal.

There are three ways of adjusting color: 9300K: Bluish white

6500K: Reddish white User defined:

You can adjust the colors red, green and blue to the intensity you desire.

LANGUAGE:

Select the OSD menu language from English, German, French, Italian and Spanish.

OSD POSITION:

This changes the position of the OSD window on the screen

INFORMATION:

This shows brief information on the screen.

RESET:

Recall to default settings

Troubleshooting

English

English